Image corruption on rtsp streams

[onejay09]

i took a screenshot of the corruption, its an issue because it sets off motion detection
cpu usage shoots to 100% when it corrupts.

http://s8.postimg.org/ptibf2ded/Screen_Shot_2016_01_28_at_17_01_13.png

======================dmesg.log========================<

[Thu Jan 28 16:54:03 2016] Booting Linux on physical CPU 0xf00
[Thu Jan 28 16:54:03 2016] Linux version 4.1.13-meye (ccrisan@supermicro) (gcc version 4.8.5 (Buildroot 2015.08-rc1-g3394b0c) ) #1 SMP PREEMPT Sat Jan 9 20:30:46 EET 2016
[Thu Jan 28 16:54:03 2016] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[Thu Jan 28 16:54:03 2016] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Thu Jan 28 16:54:03 2016] Machine: BCM2709
[Thu Jan 28 16:54:03 2016] cma: Reserved 8 MiB at 0x36800000
[Thu Jan 28 16:54:03 2016] Memory policy: Data cache writealloc
[Thu Jan 28 16:54:03 2016] On node 0 totalpages: 225280
[Thu Jan 28 16:54:03 2016] free_area_init_node: node 0, pgdat 8058a340, node_mem_map b6112000
[Thu Jan 28 16:54:03 2016] Normal zone: 1760 pages used for memmap
[Thu Jan 28 16:54:03 2016] Normal zone: 0 pages reserved
[Thu Jan 28 16:54:03 2016] Normal zone: 225280 pages, LIFO batch:31
[Thu Jan 28 16:54:03 2016] [bcm2709_smp_init_cpus] enter (93c0->f3003010)
[Thu Jan 28 16:54:03 2016] [bcm2709_smp_init_cpus] ncores=4
[Thu Jan 28 16:54:03 2016] PERCPU: Embedded 10 pages/cpu @b60e5000 s11136 r8192 d21632 u40960
[Thu Jan 28 16:54:03 2016] pcpu-alloc: s11136 r8192 d21632 u40960 alloc=10*4096
[Thu Jan 28 16:54:03 2016] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[Thu Jan 28 16:54:03 2016] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 223520
[Thu Jan 28 16:54:03 2016] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2709.boardrev=0xa21041 bcm2709.serial=0xdc870bb0 smsc95xx.macaddr=B8:27:EB:87:0B:B0 bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.fiq_fix_enable=1 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait ro rootflags=noload panic=10 quiet loglevel=1
[Thu Jan 28 16:54:03 2016] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Thu Jan 28 16:54:03 2016] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Thu Jan 28 16:54:03 2016] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Thu Jan 28 16:54:03 2016] Memory: 878848K/901120K available (4003K kernel code, 235K rwdata, 1228K rodata, 172K init, 359K bss, 14080K reserved, 8192K cma-reserved)
[Thu Jan 28 16:54:03 2016] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xb7800000 - 0xff000000 (1144 MB)
lowmem : 0x80000000 - 0xb7000000 ( 880 MB)
modules : 0x7f000000 - 0x80000000 ( 16 MB)
.text : 0x80008000 - 0x80524034 (5233 kB)
.init : 0x80525000 - 0x80550000 ( 172 kB)
.data : 0x80550000 - 0x8058afc8 ( 236 kB)
.bss : 0x8058d000 - 0x805e6ee4 ( 360 kB)
[Thu Jan 28 16:54:03 2016] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Thu Jan 28 16:54:03 2016] Preemptible hierarchical RCU implementation.
[Thu Jan 28 16:54:03 2016] NR_IRQS:608
[Thu Jan 28 16:54:03 2016] Architected cp15 timer(s) running at 19.20MHz (phys).
[Thu Jan 28 16:54:03 2016] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Thu Jan 28 16:54:03 2016] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Thu Jan 28 16:54:03 2016] Switching to timer-based delay loop, resolution 52ns
[Thu Jan 28 16:54:03 2016] Console: colour dummy device 80x30
[Thu Jan 28 16:54:03 2016] console [tty1] enabled
[Thu Jan 28 16:54:03 2016] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=19200)
[Thu Jan 28 16:54:03 2016] pid_max: default: 32768 minimum: 301
[Thu Jan 28 16:54:03 2016] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Thu Jan 28 16:54:03 2016] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Thu Jan 28 16:54:03 2016] CPU: Testing write buffer coherency: ok
[Thu Jan 28 16:54:03 2016] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[Thu Jan 28 16:54:03 2016] [bcm2709_smp_prepare_cpus] enter
[Thu Jan 28 16:54:03 2016] Setting up static identity map for 0x8240 - 0x8274
[Thu Jan 28 16:54:03 2016] [bcm2709_boot_secondary] cpu:1 started (0) 18
[Thu Jan 28 16:54:03 2016] [bcm2709_secondary_init] enter cpu:1
[Thu Jan 28 16:54:03 2016] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
[Thu Jan 28 16:54:03 2016] [bcm2709_boot_secondary] cpu:2 started (0) 18
[Thu Jan 28 16:54:03 2016] [bcm2709_secondary_init] enter cpu:2
[Thu Jan 28 16:54:03 2016] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
[Thu Jan 28 16:54:03 2016] [bcm2709_boot_secondary] cpu:3 started (0) 18
[Thu Jan 28 16:54:03 2016] [bcm2709_secondary_init] enter cpu:3
[Thu Jan 28 16:54:03 2016] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
[Thu Jan 28 16:54:03 2016] Brought up 4 CPUs
[Thu Jan 28 16:54:03 2016] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Thu Jan 28 16:54:03 2016] CPU: All CPU(s) started in HYP mode.
[Thu Jan 28 16:54:03 2016] CPU: Virtualization extensions available.
[Thu Jan 28 16:54:03 2016] devtmpfs: initialized
[Thu Jan 28 16:54:03 2016] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[Thu Jan 28 16:54:03 2016] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[Thu Jan 28 16:54:03 2016] NET: Registered protocol family 16
[Thu Jan 28 16:54:03 2016] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[Thu Jan 28 16:54:03 2016] bcm2709.uart_clock = 3000000
[Thu Jan 28 16:54:03 2016] Serial: AMBA PL011 UART driver
[Thu Jan 28 16:54:03 2016] dev:f1: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev3
[Thu Jan 28 16:54:03 2016] bcm2835-mbox bcm2835-mbox: mailbox enabled
[Thu Jan 28 16:54:03 2016] bcm2708-dmaengine bcm2708-dmaengine: DMA legacy API manager at f3007000, dmachans=0x7f35
[Thu Jan 28 16:54:03 2016] bcm2708-dmaengine bcm2708-dmaengine: failed to get irq for DMA channel 13
[Thu Jan 28 16:54:03 2016] bcm2708-dmaengine bcm2708-dmaengine: Initialized 8 DMA channels (+ 1 legacy)
[Thu Jan 28 16:54:03 2016] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver
[Thu Jan 28 16:54:03 2016] bcm2708-dmaengine bcm2708-dmaengine: dma_debug:0
[Thu Jan 28 16:54:03 2016] usbcore: registered new interface driver usbfs
[Thu Jan 28 16:54:03 2016] usbcore: registered new interface driver hub
[Thu Jan 28 16:54:03 2016] usbcore: registered new device driver usb
[Thu Jan 28 16:54:03 2016] media: Linux media interface: v0.10
[Thu Jan 28 16:54:03 2016] Linux video capture interface: v2.00
[Thu Jan 28 16:54:03 2016] raspberrypi-firmware raspberrypi-firmware.0: Attached to firmware from 2015-11-18 15:48
[Thu Jan 28 16:54:03 2016] Advanced Linux Sound Architecture Driver Initialized.
[Thu Jan 28 16:54:03 2016] Switched to clocksource arch_sys_counter
[Thu Jan 28 16:54:03 2016] FS-Cache: Loaded
[Thu Jan 28 16:54:03 2016] CacheFiles: Loaded
[Thu Jan 28 16:54:03 2016] NET: Registered protocol family 2
[Thu Jan 28 16:54:03 2016] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Thu Jan 28 16:54:03 2016] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Thu Jan 28 16:54:03 2016] TCP: Hash tables configured (established 8192 bind 8192)
[Thu Jan 28 16:54:03 2016] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Thu Jan 28 16:54:03 2016] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Thu Jan 28 16:54:03 2016] NET: Registered protocol family 1
[Thu Jan 28 16:54:03 2016] bcm2708_gpio: bcm2708_gpio_probe 80572ac8
[Thu Jan 28 16:54:03 2016] futex hash table entries: 1024 (order: 4, 65536 bytes)
[Thu Jan 28 16:54:03 2016] FS-Cache: Netfs 'cifs' registered for caching
[Thu Jan 28 16:54:03 2016] Key type cifs.spnego registered
[Thu Jan 28 16:54:03 2016] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Thu Jan 28 16:54:03 2016] io scheduler noop registered
[Thu Jan 28 16:54:03 2016] io scheduler deadline registered
[Thu Jan 28 16:54:03 2016] io scheduler cfq registered (default)
[Thu Jan 28 16:54:03 2016] BCM2708FB: allocated DMA memory f6c00000
[Thu Jan 28 16:54:03 2016] BCM2708FB: allocated DMA channel 0 @ f3007000
[Thu Jan 28 16:54:03 2016] Console: switching to colour frame buffer device 82x26
[Thu Jan 28 16:54:03 2016] bcm2708_rng_init=b7806000
[Thu Jan 28 16:54:03 2016] vc-cma: Videocore CMA driver
[Thu Jan 28 16:54:03 2016] vc-cma: vc_cma_base = 0x00000000
[Thu Jan 28 16:54:03 2016] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
[Thu Jan 28 16:54:03 2016] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
[Thu Jan 28 16:54:03 2016] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[Thu Jan 28 16:54:03 2016] brd: module loaded
[Thu Jan 28 16:54:03 2016] vchiq: vchiq_init_state: slot_zero = 0xb6c80000, is_master = 0
[Thu Jan 28 16:54:03 2016] usbcore: registered new interface driver smsc95xx
[Thu Jan 28 16:54:03 2016] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Thu Jan 28 16:54:04 2016] Core Release: 2.80a
[Thu Jan 28 16:54:04 2016] Setting default values for core params
[Thu Jan 28 16:54:04 2016] Finished setting default values for core params
[Thu Jan 28 16:54:04 2016] Using Buffer DMA mode
[Thu Jan 28 16:54:04 2016] Periodic Transfer Interrupt Enhancement - disabled
[Thu Jan 28 16:54:04 2016] Multiprocessor Interrupt Enhancement - disabled
[Thu Jan 28 16:54:04 2016] OTG VER PARAM: 0, OTG VER FLAG: 0
[Thu Jan 28 16:54:04 2016] Dedicated Tx FIFOs mode
[Thu Jan 28 16:54:04 2016] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xb6c14000 dma = 0xf6c14000 len=9024
[Thu Jan 28 16:54:04 2016] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
[Thu Jan 28 16:54:04 2016] dwc_otg: Microframe scheduler enabled
[Thu Jan 28 16:54:04 2016] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x802bc5b8
[Thu Jan 28 16:54:04 2016] WARN::hcd_init_fiq:413: FIQ ASM at 0x802bc918 length 36
[Thu Jan 28 16:54:04 2016] WARN::hcd_init_fiq:438: MPHI regs_base at 0xb7898000
[Thu Jan 28 16:54:04 2016] dwc_otg bcm2708_usb: DWC OTG Controller
[Thu Jan 28 16:54:04 2016] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[Thu Jan 28 16:54:04 2016] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[Thu Jan 28 16:54:04 2016] Init: Port Power? op_state=1
[Thu Jan 28 16:54:04 2016] Init: Power Port (0)
[Thu Jan 28 16:54:04 2016] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Thu Jan 28 16:54:04 2016] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Thu Jan 28 16:54:04 2016] usb usb1: Product: DWC OTG Controller
[Thu Jan 28 16:54:04 2016] usb usb1: Manufacturer: Linux 4.1.13-meye dwc_otg_hcd
[Thu Jan 28 16:54:04 2016] usb usb1: SerialNumber: bcm2708_usb
[Thu Jan 28 16:54:04 2016] hub 1-0:1.0: USB hub found
[Thu Jan 28 16:54:04 2016] hub 1-0:1.0: 1 port detected
[Thu Jan 28 16:54:04 2016] dwc_otg: FIQ enabled
[Thu Jan 28 16:54:04 2016] dwc_otg: NAK holdoff enabled
[Thu Jan 28 16:54:04 2016] dwc_otg: FIQ split-transaction FSM enabled
[Thu Jan 28 16:54:04 2016] Module dwc_common_port init
[Thu Jan 28 16:54:04 2016] usbcore: registered new interface driver uvcvideo
[Thu Jan 28 16:54:04 2016] USB Video Class driver (1.1.1)
[Thu Jan 28 16:54:04 2016] bcm2708 watchdog, heartbeat=10 sec (nowayout=0)
[Thu Jan 28 16:54:04 2016] bcm2835-cpufreq: min=600000 max=900000
[Thu Jan 28 16:54:04 2016] sdhci: Secure Digital Host Controller Interface driver
[Thu Jan 28 16:54:04 2016] sdhci: Copyright(c) Pierre Ossman
[Thu Jan 28 16:54:04 2016] mmc-bcm2835 mmc-bcm2835.0: mmc_debug:0 mmc_debug2:0
[Thu Jan 28 16:54:04 2016] mmc-bcm2835 mmc-bcm2835.0: DMA channels allocated
[Thu Jan 28 16:54:04 2016] sdhci-pltfm: SDHCI platform and OF driver helper
[Thu Jan 28 16:54:04 2016] hidraw: raw HID events driver (C) Jiri Kosina
[Thu Jan 28 16:54:04 2016] usbcore: registered new interface driver usbhid
[Thu Jan 28 16:54:04 2016] usbhid: USB HID core driver
[Thu Jan 28 16:54:04 2016] ip_tables: (C) 2000-2006 Netfilter Core Team
[Thu Jan 28 16:54:04 2016] NET: Registered protocol family 17
[Thu Jan 28 16:54:04 2016] Key type dns_resolver registered
[Thu Jan 28 16:54:04 2016] Registering SWP/SWPB emulation handler
[Thu Jan 28 16:54:04 2016] vc-sm: Videocore shared memory driver
[Thu Jan 28 16:54:04 2016] [vc_sm_connected_init]: start
[Thu Jan 28 16:54:04 2016] [vc_sm_connected_init]: end - returning 0
[Thu Jan 28 16:54:04 2016] ALSA device list:
[Thu Jan 28 16:54:04 2016] #0: bcm2835 ALSA
[Thu Jan 28 16:54:04 2016] Waiting for root device /dev/mmcblk0p2...
[Thu Jan 28 16:54:04 2016] mmc0: host does not support reading read-only switch, assuming write-enable
[Thu Jan 28 16:54:04 2016] mmc0: new high speed SDHC card at address aaaa
[Thu Jan 28 16:54:04 2016] mmcblk0: mmc0:aaaa SL08G 7.40 GiB
[Thu Jan 28 16:54:04 2016] mmcblk0: p1 p2 p3
[Thu Jan 28 16:54:04 2016] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: noload
[Thu Jan 28 16:54:04 2016] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Thu Jan 28 16:54:04 2016] devtmpfs: mounted
[Thu Jan 28 16:54:04 2016] Freeing unused kernel memory: 172K (80525000 - 80550000)
[Thu Jan 28 16:54:04 2016] Indeed it is in host mode hprt0 = 00021501
[Thu Jan 28 16:54:04 2016] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Thu Jan 28 16:54:04 2016] Indeed it is in host mode hprt0 = 00001101
[Thu Jan 28 16:54:04 2016] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[Thu Jan 28 16:54:04 2016] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Thu Jan 28 16:54:04 2016] hub 1-1:1.0: USB hub found
[Thu Jan 28 16:54:04 2016] hub 1-1:1.0: 5 ports detected
[Thu Jan 28 16:54:05 2016] EXT4-fs (mmcblk0p3): recovery complete
[Thu Jan 28 16:54:05 2016] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[Thu Jan 28 16:54:05 2016] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Thu Jan 28 16:54:05 2016] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[Thu Jan 28 16:54:05 2016] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Thu Jan 28 16:54:05 2016] smsc95xx v1.0.4
[Thu Jan 28 16:54:05 2016] : bcm2835-v4l2: error -1 while loading driver
[Thu Jan 28 16:54:05 2016] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:87:0b:b0
[Thu Jan 28 16:54:05 2016] usb 1-1.4: new high-speed USB device number 4 using dwc_otg
[Thu Jan 28 16:54:05 2016] usb 1-1.4: New USB device found, idVendor=058f, idProduct=3880
[Thu Jan 28 16:54:05 2016] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[Thu Jan 28 16:54:05 2016] usb 1-1.4: Product: USB 2.0 PC Camera
[Thu Jan 28 16:54:05 2016] usb 1-1.4: Manufacturer: Alcor Micro, Corp.
[Thu Jan 28 16:54:05 2016] uvcvideo: Found UVC 1.00 device USB 2.0 PC Camera (058f:3880)
[Thu Jan 28 16:54:05 2016] input: USB 2.0 PC Camera as /devices/platform/bcm2708_usb/usb1/1-1/1-1.4/1-1.4:1.0/input/input0
[Thu Jan 28 16:54:05 2016] udevd[179]: starting version 3.1.2
[Thu Jan 28 16:54:05 2016] random: udevd urandom read with 71 bits of entropy available
[Thu Jan 28 16:54:05 2016] usb 1-1.2: new high-speed USB device number 5 using dwc_otg
[Thu Jan 28 16:54:05 2016] bcm2708_spi bcm2708_spi.0: master is unqueued, this is deprecated
[Thu Jan 28 16:54:05 2016] bcm2708_spi bcm2708_spi.0: SPI Controller at 0x3f204000 (irq 80)
[Thu Jan 28 16:54:05 2016] bcm2708_i2c_init_pinmode(1,2)
[Thu Jan 28 16:54:05 2016] bcm2708_i2c_init_pinmode(1,3)
[Thu Jan 28 16:54:05 2016] bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x3f804000 (irq 79) (baudrate 100000)
[Thu Jan 28 16:54:05 2016] usb 1-1.2: New USB device found, idVendor=0781, idProduct=5581
[Thu Jan 28 16:54:05 2016] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[Thu Jan 28 16:54:05 2016] usb 1-1.2: Product: Ultra
[Thu Jan 28 16:54:05 2016] usb 1-1.2: Manufacturer: SanDisk
[Thu Jan 28 16:54:05 2016] usb 1-1.2: SerialNumber: 4C531001490816105582
[Thu Jan 28 16:54:06 2016] SCSI subsystem initialized
[Thu Jan 28 16:54:06 2016] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[Thu Jan 28 16:54:06 2016] scsi host0: usb-storage 1-1.2:1.0
[Thu Jan 28 16:54:06 2016] usbcore: registered new interface driver usb-storage
[Thu Jan 28 16:54:06 2016] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Thu Jan 28 16:54:07 2016] scsi 0:0:0:0: Direct-Access SanDisk Ultra 1.00 PQ: 0 ANSI: 6
[Thu Jan 28 16:54:07 2016] sd 0:0:0:0: [sda] 30031250 512-byte logical blocks: (15.3 GB/14.3 GiB)
[Thu Jan 28 16:54:07 2016] sd 0:0:0:0: [sda] Write Protect is off
[Thu Jan 28 16:54:07 2016] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[Thu Jan 28 16:54:07 2016] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[Thu Jan 28 16:54:07 2016] sda: sda1
[Thu Jan 28 16:54:07 2016] sd 0:0:0:0: [sda] Attached SCSI removable disk
[Thu Jan 28 16:54:07 2016] random: nonblocking pool is initialized
[Thu Jan 28 16:54:07 2016] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[Thu Jan 28 16:54:08 2016] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1`

======================motioneye.log.log========================

2016-01-28 15:37:31: [motioneye] INFO: hello! this is motionEye server 20160109
2016-01-28 15:37:31: [motioneye] INFO: main config file /data/etc/motion.conf does not exist, using default values
2016-01-28 15:37:32: [motioneye] INFO: cleanup started
2016-01-28 15:37:32: [motioneye] INFO: wsswitch started
2016-01-28 15:37:32: [motioneye] INFO: tasks started
2016-01-28 15:37:32: [motioneye] INFO: mjpg client garbage collector started
2016-01-28 15:37:32: [motioneye] INFO: smb mounts started
2016-01-28 15:37:32: [motioneye] INFO: server started
2016-01-28 15:44:12: [motioneye] INFO: adding new camera with id 1...
2016-01-28 15:44:12: [motioneye] INFO: main config file /data/etc/motion.conf does not exist, using default values
2016-01-28 15:44:15: [motioneye] WARNING: Connect error on fd 22: ECONNREFUSED
2016-01-28 15:44:16: [motioneye] WARNING: Connect error on fd 22: ECONNREFUSED
2016-01-28 15:44:17: [motioneye] WARNING: Connect error on fd 22: ECONNREFUSED
2016-01-28 15:44:18: [motioneye] WARNING: Connect error on fd 22: ECONNREFUSED
2016-01-28 15:44:19: [motioneye] WARNING: Connect error on fd 22: ECONNREFUSED
2016-01-28 15:44:20: [motioneye] WARNING: Connect error on fd 22: ECONNREFUSED
2016-01-28 15:44:22: [motioneye] WARNING: Connect error on fd 22: ECONNREFUSED
2016-01-28 15:44:23: [motioneye] WARNING: Connect error on fd 22: ECONNREFUSED
2016-01-28 15:44:24: [motioneye] WARNING: Connect error on fd 22: ECONNREFUSED
2016-01-28 15:44:25: [motioneye] WARNING: Connect error on fd 22: ECONNREFUSED
2016-01-28 15:44:26: [motioneye] WARNING: Connect error on fd 22: ECONNREFUSED
2016-01-28 15:51:55: [motioneye] INFO: adding new camera with id 2...
2016-01-28 15:52:00: [motioneye] WARNING: Connect error on fd 13: ECONNREFUSED
2016-01-28 15:52:00: [motioneye] WARNING: Connect error on fd 13: ECONNREFUSED
2016-01-28 15:52:01: [motioneye] WARNING: Connect error on fd 18: ECONNREFUSED
2016-01-28 15:52:02: [motioneye] WARNING: Connect error on fd 18: ECONNREFUSED
2016-01-28 15:52:04: [motioneye] WARNING: Connect error on fd 18: ECONNREFUSED
2016-01-28 15:52:05: [motioneye] WARNING: Connect error on fd 18: ECONNREFUSED
2016-01-28 15:52:06: [motioneye] WARNING: Connect error on fd 18: ECONNREFUSED
2016-01-28 15:52:07: [motioneye] WARNING: Connect error on fd 18: ECONNREFUSED
2016-01-28 15:52:08: [motioneye] WARNING: Connect error on fd 18: ECONNREFUSED
2016-01-28 15:52:09: [motioneye] WARNING: Connect error on fd 18: ECONNREFUSED
2016-01-28 15:52:11: [motioneye] WARNING: Connect error on fd 18: ECONNREFUSED
2016-01-28 15:52:12: [motioneye] WARNING: Connect error on fd 18: ECONNREFUSED
2016-01-28 15:54:41: [motioneye] INFO: interrupt signal received, shutting down...
2016-01-28 15:54:41: [motioneye] INFO: server stopped
2016-01-28 15:54:41: [motioneye] INFO: tasks stopped
2016-01-28 15:54:43: [motioneye] INFO: motion stopped
2016-01-28 15:54:43: [motioneye] INFO: smb mounts stopped
2016-01-28 15:54:43: [motioneye] INFO: bye!
2016-01-28 15:54:43: [relayevent] ERROR: failed to relay event: [Errno 104] Connection reset by peer
2016-01-28 15:54:43: [relayevent] ERROR: failed to relay event: [Errno 104] Connection reset by peer
2016-01-28 15:54:43: [relayevent] ERROR: failed to relay event: [Errno 104] Connection reset by peer
2016-01-28 15:54:43: [relayevent] ERROR: failed to relay event: [Errno 104] Connection reset by peer
2016-01-28 15:55:04: [motioneye] INFO: hello! this is motionEye server 20160109
2016-01-28 15:55:07: [motioneye] INFO: cleanup started
2016-01-28 15:55:07: [motioneye] INFO: wsswitch started
2016-01-28 15:55:07: [motioneye] INFO: tasks started
2016-01-28 15:55:07: [motioneye] INFO: mjpg client garbage collector started
2016-01-28 15:55:07: [motioneye] INFO: smb mounts started
2016-01-28 15:55:07: [motioneye] INFO: server started
2016-01-28 15:55:08: [motioneye] WARNING: Connect error on fd 14: ECONNREFUSED
2016-01-28 15:55:09: [motioneye] WARNING: Connect error on fd 15: ECONNREFUSED
2016-01-28 15:55:10: [motioneye] WARNING: Connect error on fd 15: ECONNREFUSED
2016-01-28 15:55:11: [motioneye] WARNING: Connect error on fd 15: ECONNREFUSED
2016-01-28 15:55:12: [motioneye] WARNING: Connect error on fd 16: ECONNREFUSED
2016-01-28 15:55:13: [motioneye] WARNING: Connect error on fd 16: ECONNREFUSED
2016-01-28 15:55:15: [motioneye] WARNING: Connect error on fd 16: ECONNREFUSED
2016-01-28 15:55:16: [motioneye] WARNING: Connect error on fd 16: ECONNREFUSED
2016-01-28 15:55:17: [motioneye] WARNING: Connect error on fd 16: ECONNREFUSED
2016-01-28 15:55:18: [motioneye] WARNING: Connect error on fd 16: ECONNREFUSED
2016-01-28 15:55:19: [motioneye] WARNING: Connect error on fd 16: ECONNREFUSED
2016-01-28 16:00:46: [motioneye] INFO: rebooting
2016-01-28 16:00:46: [motioneye] INFO: executing "/sbin/reboot"
2016-01-28 16:00:48: [motioneye] INFO: interrupt signal received, shutting down...
2016-01-28 16:00:48: [motioneye] INFO: server stopped
2016-01-28 16:00:48: [motioneye] INFO: tasks stopped
2016-01-28 16:00:51: [motioneye] INFO: motion stopped
2016-01-28 16:00:51: [motioneye] INFO: smb mounts stopped
2016-01-28 16:00:51: [motioneye] INFO: bye!
2016-01-28 16:00:51: [relayevent] ERROR: failed to relay event: [Errno 104] Connection reset by peer
2016-01-28 16:00:51: [relayevent] ERROR: failed to relay event: [Errno 104] Connection reset by peer
2016-01-28 16:00:51: [relayevent] ERROR: failed to relay event: [Errno 104] Connection reset by peer
2016-01-28 16:00:51: [relayevent] ERROR: failed to relay event: [Errno 104] Connection reset by peer
2016-01-28 16:01:08: [motioneye] INFO: hello! this is motionEye server 20160109
2016-01-28 16:01:10: [motioneye] INFO: cleanup started
2016-01-28 16:01:10: [motioneye] INFO: wsswitch started
2016-01-28 16:01:11: [motioneye] INFO: tasks started
2016-01-28 16:01:11: [motioneye] INFO: mjpg client garbage collector started
2016-01-28 16:01:11: [motioneye] INFO: smb mounts started
2016-01-28 16:01:11: [motioneye] INFO: server started
2016-01-28 16:01:22: [motioneye] WARNING: Connect error on fd 15: ECONNREFUSED
2016-01-28 16:05:52: [motioneye] ERROR: motion not running, starting it
2016-01-28 16:26:04: [motioneye] WARNING: mjpg client connection for camera 1 on port 8081 is closed
2016-01-28 16:42:18: [motioneye] INFO: rebooting
2016-01-28 16:42:19: [motioneye] INFO: executing "/sbin/reboot"
2016-01-28 16:42:21: [motioneye] INFO: interrupt signal received, shutting down...
2016-01-28 16:42:22: [motioneye] INFO: server stopped
2016-01-28 16:42:22: [motioneye] INFO: tasks stopped
2016-01-28 16:42:24: [motioneye] INFO: motion stopped
2016-01-28 16:42:24: [motioneye] INFO: smb mounts stopped
2016-01-28 16:42:24: [motioneye] INFO: bye!
2016-01-28 16:42:24: [relayevent] ERROR: failed to relay event: [Errno 104] Connection reset by peer
2016-01-28 16:42:24: [relayevent] ERROR: failed to relay event: [Errno 104] Connection reset by peer
2016-01-28 16:42:24: [relayevent] ERROR: failed to relay event: [Errno 104] Connection reset by peer
2016-01-28 16:42:24: [relayevent] ERROR: failed to relay event: [Errno 104] Connection reset by peer
2016-01-28 16:42:41: [motioneye] INFO: hello! this is motionEye server 20160109
2016-01-28 16:42:43: [motioneye] INFO: cleanup started
2016-01-28 16:42:43: [motioneye] INFO: wsswitch started
2016-01-28 16:42:44: [motioneye] INFO: tasks started
2016-01-28 16:42:44: [motioneye] INFO: mjpg client garbage collector started
2016-01-28 16:42:44: [motioneye] INFO: smb mounts started
2016-01-28 16:42:44: [motioneye] INFO: server started
2016-01-28 16:42:48: [motioneye] WARNING: Connect error on fd 15: ECONNREFUSED
2016-01-28 16:51:04: [motioneye] WARNING: Connect error on fd 16: ECONNREFUSED
2016-01-28 16:51:05: [motioneye] WARNING: Connect error on fd 16: ECONNREFUSED
2016-01-28 16:51:06: [motioneye] WARNING: Connect error on fd 17: ECONNREFUSED
2016-01-28 16:51:07: [motioneye] WARNING: Connect error on fd 17: ECONNREFUSED
2016-01-28 16:51:08: [motioneye] WARNING: Connect error on fd 17: ECONNREFUSED
2016-01-28 16:51:09: [motioneye] WARNING: Connect error on fd 17: ECONNREFUSED
2016-01-28 16:51:10: [motioneye] WARNING: Connect error on fd 17: ECONNREFUSED
2016-01-28 16:51:11: [motioneye] WARNING: Connect error on fd 17: ECONNREFUSED
2016-01-28 16:51:13: [motioneye] WARNING: Connect error on fd 17: ECONNREFUSED
2016-01-28 16:51:14: [motioneye] WARNING: Connect error on fd 17: ECONNREFUSED
2016-01-28 16:51:15: [motioneye] WARNING: Connect error on fd 15: ECONNREFUSED
2016-01-28 16:51:16: [motioneye] WARNING: Connect error on fd 15: ECONNREFUSED
2016-01-28 16:51:17: [motioneye] WARNING: Connect error on fd 15: ECONNREFUSED
2016-01-28 16:51:18: [motioneye] WARNING: Connect error on fd 15: ECONNREFUSED
2016-01-28 16:51:20: [motioneye] WARNING: Connect error on fd 15: ECONNREFUSED
2016-01-28 16:51:21: [motioneye] WARNING: Connect error on fd 15: ECONNREFUSED
2016-01-28 16:51:22: [motioneye] WARNING: Connect error on fd 15: ECONNREFUSED
2016-01-28 16:51:23: [motioneye] WARNING: Connect error on fd 15: ECONNREFUSED
2016-01-28 16:53:50: [motioneye] INFO: rebooting
2016-01-28 16:53:50: [motioneye] INFO: executing "/sbin/reboot"
2016-01-28 16:53:54: [motioneye] INFO: interrupt signal received, shutting down...
2016-01-28 16:53:54: [motioneye] INFO: server stopped
2016-01-28 16:53:54: [motioneye] INFO: tasks stopped
2016-01-28 16:53:57: [motioneye] INFO: motion stopped
2016-01-28 16:53:57: [motioneye] INFO: smb mounts stopped
2016-01-28 16:53:57: [motioneye] INFO: bye!
2016-01-28 16:53:57: [relayevent] ERROR: failed to relay event: [Errno 104] Connection reset by peer
2016-01-28 16:53:57: [relayevent] ERROR: failed to relay event: [Errno 104] Connection reset by peer
2016-01-28 16:53:57: [relayevent] ERROR: failed to relay event: [Errno 104] Connection reset by peer
2016-01-28 16:53:57: [relayevent] ERROR: failed to relay event: [Errno 104] Connection reset by peer
2016-01-28 16:54:12: [motioneye] INFO: hello! this is motionEye server 20160109
2016-01-28 16:54:14: [motioneye] INFO: cleanup started
2016-01-28 16:54:14: [motioneye] INFO: wsswitch started
2016-01-28 16:54:14: [motioneye] INFO: tasks started
2016-01-28 16:54:14: [motioneye] INFO: mjpg client garbage collector started
2016-01-28 16:54:14: [motioneye] INFO: smb mounts started
2016-01-28 16:54:14: [motioneye] INFO: server started
2016-01-28 16:54:15: [motioneye] WARNING: Connect error on fd 14: ECONNREFUSED
2016-01-28 16:54:18: [motioneye] WARNING: Connect error on fd 17: ECONNREFUSED
2016-01-28 16:54:22: [motioneye] WARNING: Connect error on fd 20: ECONNREFUSED
2016-01-28 16:54:23: [motioneye] WARNING: Connect error on fd 20: ECONNREFUSED
2016-01-28 16:54:24: [motioneye] WARNING: Connect error on fd 20: ECONNREFUSED
2016-01-28 16:54:26: [motioneye] WARNING: Connect error on fd 20: ECONNREFUSED
2016-01-28 16:54:27: [motioneye] WARNING: Connect error on fd 20: ECONNREFUSED

[ccrisan]

I'm sorry but I'll have to mark this as invalid as it's a motion-related problem rather than a motionEye(OS) one.