Skip to content

Latest commit

 

History

History
156 lines (100 loc) · 4.14 KB

README.md

File metadata and controls

156 lines (100 loc) · 4.14 KB
Raw

Cryptsetup + GPG Protected Keys

This guide was created in case Sakaki's guide ever dissapears. Ultimately she has abandoned maintaining it and the scope and purpose is much different.

This guide is intended to help a user setup an encrypted drive in Linux using Cryptsetup with password protected key-files leveraging GPG.

This guide is intended for drives you might use for your rootfs and perhaps other partitions your system depends on.

Therefore we use a LVM-on-top-of-LUKS setup. This allows us to encrypt a large physical partition and divy it up later.

1 - Partition the Drive

First we partition our drive using parted

parted -a optimal /dev/sdc

Using parted is beyond the scope of this guide, but going forward we will use /dev/sdc1 as an example for our physical partition.

2 - Create the GPG Password Protected Key

To allow gpg to work properly in our terminal we must set the following environment variable

export GPG_TTY=$(tty)

Now we use dd to generate a key-file we'll use for encryption and password protect it with gpg.

Store this key somewhere safe.

dd if=/dev/urandom bs=8388607 count=1 | gpg --symmetric --cipher-algo AES256 --output /tmp/luks-key.gpg

3 - Format the physical partition with cryptsetup

Using the gpg protected key-file we'll format our physical partition

gpg --decrypt /tmp/luks-key.gpg | cryptsetup --key-size 512 --key-file - luksFormat /dev/sdc1

We can verify the success of this operation by checking the devices luks headers.

cryptsetup luksDump /dev/sdc1

4 - Backup luksHeaders & alternate keys

As an additional precaution, we will backup our luks Headers.

Again, store this file someplace safe.

cyptsetup luksHeaderBackup /dev/sdc1 --header-backup-file /tmp/luks-header.img

Adding a fallback password

Just in case all else fails, we can setup a fallback password to decrypt our physical partition.

To prevent secrets from being written to the disk we'll use a named pipe.

mkfifo /tmp/gpgpipe
echo RELOADAGENT | gpg-connect-agent
gpg --decrypt /tmp/luks-key.gpg | cat - >/tmp/gpgpipe
cryptsetup --key-file /tmp/gpgpipe luksAddKey /dev/sdZn
rm -vf /tmp/gpgpipe

5 - Create LVM Groups + Volumes

Now we're ready to open the LUKS partition and build our LVM tables on top of it.

The --allow-discards option is to protect precious SSDs.

gpg --decrypt /tmp/luks-key.gpg | cryptsetup --key-file - luksOpen --allow-discards /dev/sdc1 drive

Now create the physical volume

pvcreate /dev/mapper/drive

Create volume group

vgcreate vg1 /dev/mapper/drive

Create Logical Volumes

Swap

lvcreate --size 10G --name swap vg1

Root

lvcreate --size 50G --name root vg1

Home

lvcreate --extents 95%FREE --name home vg1

6 - Create Filesystems & Mount

mkswap -L "swap" /dev/mapper/vg1-swap
swapon /dev/mapper/vg1-swap
mkfs.btrfs -L "root" /dev/mapper/vg1-root
mkfs.btrfs -L "home" /dev/mapper/vg1-home

7 - Mounting and Booting

In order to mount these filesystems via fstab you can follow the example below.

/dev/mapper/vg1-swap    none            swap            sw              0 0
/dev/mapper/vg1-root    /               btrfs           noatime         0 1
/dev/mapper/vg1-home    /home           btrfs           noatime         0 3

In order to pass the right commands to your initramfs when booting with grub we set GRUB_CMDLINE_LINUX value to something like the following. Make sure your initramfs supports GPG protected key-files. For genkernel we build the initramfs with the following command.

genkernel --luks --lvm --gpg initramfs

Set up grub-mkconfig for success in /etc/default/grub

Note: UUID values are physical partitions, nothing generated by LVM. To see what your physical partition's UUID is use blkid

GRUB_CMDLINE_LINUX="crypt_root=UUID=3f10f458-b151-4620-a47c-4a6427e6aede dolvm dobtrfs real_root=/dev/mapper/vg0-root root_trim=yes root_keydev=UUID=1DB9-8480 root_key=root0-luks-key.gpg real_resume=/dev/mapper/vg0-swap"

And install the configuration.

grub-mkconfig -o /boot/grub/grub.cfg