Crossover

Crossover is the minimal and sufficient xDS for Envoy that helps Canary Deployment, without sacrificing Envoy's rich feature set.

Features

Minimal Dependencies
Gradual Migration
Understandable
Feature Complete: Access to every feature Envoy provides. crossover makes no leaky abstraction on top.

Minimal Dependencies

Depends only on the Go standard library and go-yaml.

No need for kubectl, client-go, apimachineary or even Envoy's go-control-plane.

Gradual Migration

You always start with a standard Envoy without crossover. If you're happy with that, keep using it and don't bother with adding additional moving part to the mix.

Canary deployments with Flagger?

Reconfigure Envoy without time-consuming and unreliable reloads?

Enter crossover.

Add crossover as a sidecar container to your Envoy. Update configmaps and trafficsplist via kubectl or helm to load changes into Envoy in near-realtime. That's all you need to get started, really!

Understandable

No gRPC, REST server or serious K8s controller to maintain and debug.

crossover is a simple golang program that feeds only necessary parts of the config to Envoy via xDS.

It fetches well-known K8s ConfigMap and SMI TrafficSplit resources via Kubernetes' REST API, write config files for Envoy, rename the files so that Envoy can atomically reconfigure itself.

From Envoy's perspective, there's just xDS data stored at /srv/runtime/current/*.yaml visible from within Envoy, that are read from Envoy's standard local file config-source.

Feature Complete

Access to every feature Envoy provides. crossover makes no leaky abstraction on top of Envoy.

You write regular Envoy config files. crossover just merges and syncs it to Envoy for you.

Design


[ Envoy ]--reads-->[ xDS YAML file ]<--writes--[ Crossover ]--reads-->[ ConfigMap, TrafficSplit ]<--write--[ Kubectl, Helm, etc. ]

Envoy is able to reconfigure itself at runtime by reading local files or by querying one or more management servers called xDS servers.

crossover is an implementation of xDS that translates configs stored in Kubernetes to Envoy primitives.

It is an init container and a sidecar container for Envoy, deployed to your Kubernetes cluster along with Envoy, serving xDS.

It continuously reads Kubernetes ConfigMap and SMI TrafficSplit resources, to generate and feed xDS resources to Envoy via the local filesystem.

As it relies solely on the local filesystem to communicate with Envoy, it is transparent to the operator. You don't need any experience in gRPC, which is typically required for managing famous xDS implementations. Just kubectl exec into the Envoy pod and cat standard Envoy config files generated by the loader to debug.

Thanks to Envoy's inotify support and Kubernetes' Watch API, any changes made via ConfigMap and TrafficSplit are still recongnizable by Envoy in near real-time.

Why not...

Why not use configmap volumes? Because it doesn't apply changes to the local disk in a way Envoy wants.

Why not write a gRPC server that translates SMI resources to xDS resources? Because I don't want to introduce a leaky abstraction.

Use-cases

Ingress Gateway
Canary Releases
In-Cluster Router/Load-Balancer

Ingress Gateway

Turn stable/envoy chart into a dynamically configurable API Gateway, Ingress Gateway or Front Proxy

Canary Releases

Do weighted load-balancing and canary deployments with zero Envoy restart, redeployment and CRD. Just distribute RDS(Route Discovery Service) files via configmaps!.

In-Cluster Router/Load-Balancer

Wanna add retries, circuit-breakers, tracing, metrics to your traffic? Deploy Envoy paired with crossover in front of your apps. No need for service meshes from day 1.

What's this?

crossover is an init-container AND a sidecar for your Envoy proxy to use K8s ConfigMaps as xDS backend.

This works by loading kvs defined within specified configmap(s) and writing files assuming the key is the filename and the value is the content.

You then point your Envoy to read xDS from the directory /srv/runtime/*.yaml.

crossover writes files read from configmap(s) into the directory, triggers symlink swap so that Envoy finally detects and applies changes.

Why not use configmap volumes?

You may already know that K8s supports mounting configmaps as container volumes out of the box.

The downside of using that feature to feed Envoy xDS files is that it takes 1 minute(default, configurable via kubelet --sync-interval) a change is reflected to the volume.

And more importantly, Envoy is unable to detect changes made in configmap volumes due to that it relies on inotify MOVE events to occur, where configmap volume changes only trigger the below events:

root@envoy-675dc8d98b-tvw9b:/# inotifywait -m /xds/rds.yaml
Setting up watches.
Watches established.
/xds/rds.yaml OPEN
/xds/rds.yaml ACCESS
/xds/rds.yaml CLOSE_NOWRITE,CLOSE
/xds/rds.yaml ATTRIB
/xds/rds.yaml DELETE_SELF

So in nutshell, crossover is the minimal and sufficient companion to actually distribute xDS data via configmaps, without using more advanced CRD-based solutions like Istio and VMWare Contour.

Usage

$ crossover -h
Usage of ./crossover:
  -apiserver string
    	K8s api endpoint (default "https://kubernetes")
  -configmap value
    	the configmap to process.
  -dry-run
    	print processed configmaps and secrets and do not submit them to the cluster.
  -insecure
    	disable tls server verification
  -namespace string
    	the namespace to process.
  -onetime
    	run one time and exit.
  -output-dir string
    	Directory to putput xDS configs so that Envoy can read
  -smi
    	Enable SMI integration
  -sync-interval duration
    	the time duration between template processing. (default 1m0s)
  -token-file string
    	path to serviceaccount token file (default "/var/run/secrets/kubernetes.io/serviceaccount/token")
  -trafficsplit value
    	the trafficsplit to be watched and merged into the configmap
  -watch
    	use watch api to detect changes near realtime

Getting Started

ConfigMap-Only Mode

Try weighted load-balancing using crossover!

Deploy Envoy along with the loader using the stable/envoy chart:

helm repo add stable https://kubernetes-charts.storage.googleapis.com
helm upgrade --install envoy stable/envoy -f example/values.yaml -f example/values.services.yaml

Or by using crossover/envoy chart:

helm repo add crossover https://mumoshu.github.io/crossover
helm upgrade --install envoy crossover/envoy -f example/values.upstreams.yaml

Then install backends - we use @stefanprodan's awesome podinfo:

helm repo add flagger https://flagger.app
helm upgrade --install bold-olm flagger/podinfo --set canary.enabled=false
helm upgrade --install eerie-octopus flagger/podinfo --set canary.enabled=false

In another terminal, run the tester pod to watch traffic shifts:

kubectl run -it --rm --image alpine:3.9 tester sh

apk add --update curl
watch curl http://envoy:10000

Finally, try changing load-balancing weights instantly and without restarting Envoy at all:

# 100% bold-olm
helm upgrade --install envoy stable/envoy -f example/values.yaml -f example/values.services.yaml \
  --set services.podinfo.backends.eerie-octopus-podinfo.weight=0 \
  --set services.podinfo.backends.bold-olm-podinfo.weight=100

# 100% eerie-octopus
helm upgrade --install envoy stable/envoy -f example/values.yaml -f example/values.services.yaml \
  --set services.podinfo.backends.eerie-octopus-podinfo.weight=100 \
  --set services.podinfo.backends.bold-olm-podinfo.weight=0

See example/values.yaml for more details on the configuration.

ConfigMap + SMI TrafficSplit Mode

The setup is mostly similar to that for CofigMap-only mode.

Just add services.podinfo.smi.enabled=true while installing Envoy:

helm upgrade --install envoy stable/envoy \
  -f example/values.yaml -f example/values.services.yaml \
  --set services.podinfo.smi.enabled=true

Or with the crossover/envoy chart:

helm repo add crossover https://mumoshu.github.com/crossover
helm upgrade --install envoy crossover/envoy -f example/values.services.yaml \
  --set services.podinfo.smi.enabled=true

Or to be extra sure, you can do it wihout example/values.services.yaml:

helm upgrade --install envoy stable/envoy   --namespace test   -f example/values.yaml   -f <(cat <<EOF
services:
  podinfo:
    smi:
      enabled: true
    backends:
      eerie-octopus-podinfo:
        port: 9898
        weight: 50
      bold-olm-podinfo:
        port: 9898
        weight: 50
EOF
)

Now you are ready to change weights by creating and modifying TrafficSplit like this:

apiVersion: split.smi-spec.io/v1alpha2
kind: TrafficSplit
metadata:
  name: podinfo
spec:
  # The root service that clients use to connect to the destination application.
  service: podinfo
  # Services inside the namespace with their own selectors, endpoints and configuration.
  backends:
  - service: eerie-octopus-podinfo
    weight: 0
  - service: bold-olm-podinfo
    weight: 100

Under the hood, crossover reads podinfo trafficsplit and envoy-xds configmap, merges the trafficsplit into the configmap to produce the final configmap envoy-xds-gen. It is envoy-xds-gen which is loaded into envoy.

For convenience, there are several manifest files each with different set of weights:

# 100% bold-olm
kubectl apply -f podinfo-v0.trafficsplit.yaml

# 75% bold-olm 25% eerie-octopus
kubectl apply -f podinfo-v1.trafficsplit.yaml

#...

# 0% bold-olm 100% eerie-octupus
kubectl apply -f podinfo-v4.trafficsplit.yaml

Developing

Bring your own K8s cluster, move to the project root, and run the following commands to give it a ride:

sudo mkdir /srv/runtime
sudo chmod -R 777 /srv/runtime
k get secret -o json $(k get secret | grep default-token | awk '{print $1 }') | jq -r .data.token | base64 -D > mytoken
export APISERVER=$(k config view --minify -o json | jq -r .clusters[0].cluster.server)
make build && ./crossover --namespace default --token-file ./mytoken --configmap incendiary-shark-envoy-xds --onetime --insecure --apiserver "http://127.0.0.1:8001"

FAQ

Why is the init container needed?

crossover needs to be included in your pod not only as a sidecar but also as an init container.

That's because Envoy checks for the existence of xDS-managed config files on startup. That is, if any of xDS-managed config files that are referenced from Envoy's bootstrap config is missing on startup, Envoy fails starting.

Once Kubernetes adds the first-class support for sidecar containers, the requisite of the init container is likely to go away.

Anyways, crossover is very resource-efficient in terms of image size and memory, it shouldn't be a huge problem.

References

Technical information to use Envoy's dynamic runtime config via local files

File Based Dynamic Configuration of Routes in Envoy Proxy
"How does one atomically change a symlink to a directory in busybox?"
Runtime configuration — envoy

Other Envoy xDS implementations

Kubernetes CRD and gRPC server based implementations

Istio
Contour
Ambassador
Gloo
flagger-appmesh-gateway

Consul and gRPC server based implementations

gojek/consul-envoy-xds
tak2siva/Envoy-Pilot

Kubernetes Services and Endpoints with gRPC server based implementations

jrockway/ekglue

Config file and gRPC server based implementations

QubitProducts/iris

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

Crossover

Features

Minimal Dependencies

Gradual Migration

Understandable

Feature Complete

Design

Why not...

Use-cases

Ingress Gateway

Canary Releases

In-Cluster Router/Load-Balancer

What's this?

Why not use configmap volumes?

Usage

Getting Started

ConfigMap-Only Mode

ConfigMap + SMI TrafficSplit Mode

Developing

FAQ

Why is the init container needed?

References

Technical information to use Envoy's dynamic runtime config via local files

Other Envoy xDS implementations

Files

README.md

Latest commit

History

README.md

File metadata and controls

Crossover

Features

Minimal Dependencies

Gradual Migration

Understandable

Feature Complete

Design

Why not...

Use-cases

Ingress Gateway

Canary Releases

In-Cluster Router/Load-Balancer

What's this?

Why not use configmap volumes?

Usage

Getting Started

ConfigMap-Only Mode

ConfigMap + SMI TrafficSplit Mode

Developing

FAQ

Why is the init container needed?

References

Technical information to use Envoy's dynamic runtime config via local files

Other Envoy xDS implementations