Skip to content

Getting started with the sample data

Jump to bottom
Jacqueline Ryan edited this page Feb 28, 2019 · 3 revisions

This repository includes several data sets to show the capabilities of the LiveView software for displaying image data from the SSD. To view this data, first install LiveView per the installation guide. Next, on opening the software, the following menu will appear:

Select the SSD (XIO) option from the menu and hit okay. Next, enter the frame geometry 640 (width) by 480 (height) in the subsequent dialogue. This sets the frame geometry to match the test mode, and is also the geometry that was LiveView will then launch.

Press Ctrl (command on Mac) + O to open the file selection dialog. Alternatively, select File > Open from the drop down menu. In the file selection dialog, navigate to the directory containing the LiveView source code, which should be called LiveViewOpenSource. There is a subfolder of this directory called "examples", which contains two data sets. In the XIO mode, directories should be selected, rather than single files.

  • Pattern 1: FPAEMULATOR: This data set represents a Focal Plane Array (FPA) Emulator test pattern produced by an FPGA. Select the directory to play through all 10 sets of 32 images.

  • Pattern 2: ROICWARM: This data set contains an actually recording from a 640x480 FPA at 74 fps that was captured at room temperature. Select the directory to play through all 10 sets of 32 images.

Clone this wiki locally