All of these files can be printed in any filament type you'd like.
| STL | Quantity |
|---|---|
| duplicator i3 duet controller case chassis mount.stl | 1 |
| duplicator i3 duet controller case back panel.stl | 1 |
| duplicator i3 duet controller case sides.stl | 1 |
| duplicator i3 duet controller case cable lock.stl | 3 |
| duplicator i3 duet controller case fan rack.stl | 1 |
| duplicator i3 duet controller case left fan bracket.stl | 1 |
| duplicator i3 duet controller case right fan bracket.stl | 1 |
| duplicator i3 duet controller case front panel.stl | 1 |
| Tool | Link | Notes |
|---|---|---|
| Terminal Crimper | Amazon | Make sure it can do 26 gauge thru 12 gauge terminals |
| Flush Cutter | Amazon | |
| Wire Stripper | Amazon | |
| Power Drill | ||
| 1/8 Twist Drill Bit | Amazon | This is for cleaning up a few 3D printed holes, so low quality is fine |
| Screw Driver Set | Amazon | Must contain a variety of Hex and Philips head drivers |
Note that several of the links are to parts assortments, and a single assortment should cover all of the parts of that type. Obviously, you can also source parts elsewhere if desired, the linked ones are just a convenient option.
| Item | Quantity | Link | Notes |
|---|---|---|---|
| Duet 3 Mini 5+ Wifi | 1 | Filastruder | My STLs don't allow for the ethernet cable to pass through them anywhere, so you must get the Wifi version. |
| Noctua NF-A9x14 PWM | 1 | Amazon | Alternatively, any 92x14mm fan will work here, I just like the performance and quietness of the Noctua. |
| 92mm Fan Filter Mesh | 1 | Amazon | These are 120mm, but they're easier to find, useful elsewhere, and easy to cut to shape. |
| M3 6mm Socket Cap Machine Screws | 6 | Amazon | If you've done the Z brace upgrade, then you likely have enough screws left over from that. |
| M3 10mm Socket Cap Machine Screws | 23 | Amazon | |
| M3 Washers | 24 | Amazon | |
| M3 Hex Nuts | 6 | Amazon | |
| M3 Square Nuts | 12 | Amazon | |
| Zip ties | 3 | Amazon | 4 inch zip ties are fine here. |
