EPS/Grid CT and Feedin not populating for K series

[williamjeccles]

As you can see, since debugging the registers with @canton7 it's mostly working but I've noticed a few values that aren't working.

I'm sure it's just a mapping issue however :)

[williamjeccles]

@canton7 let me know if you have a fix you'd like me to test out for this issue. Thanks, Will

[canton7]

We're using register 31014, which the KH spec says is "meter1 power":

(That then drives the feed-in and grid consumption sensors).

Interestingly, the other KH spec I have says that register is "TBD":

... and has CT1 up at 31049:

Mind reading 31049, see if the value looks sensible?

[canton7]

Can you give v1.10.0b6 a try?

[canton7]

@williamjeccles would you mind trying the Force Charge / Force Discharge work modes with that version as well please? I've assume srhay the KH supplies some registers, but it's be good to check.

[williamjeccles]

@canton7 will do 👍

[williamjeccles]

@canton7 looks broken now on that branch

[williamjeccles]

@canton7 this is the error on the latest build

This error originated from a custom integration.

Logger: custom_components.foxess_modbus.modbus_controller
Source: custom_components/foxess_modbus/modbus_controller.py:258
Integration: FoxESS - Modbus (documentation, issues)
First occurred: 18:55:15 (2 occurrences)
Last logged: 18:55:15

tcp://192.168.1.166:502 247 - 5 failed poll attempts: now not connected. Last error: Error reading registers. Type: RegisterType.HOLDING; start: 44008; count: 5; slave: 247 from tcp://192.168.1.166:502: Exception Response(131, 3, IllegalAddress)
tcp://192.168.1.164:502 247 - 5 failed poll attempts: now not connected. Last error: Error reading registers. Type: RegisterType.HOLDING; start: 44008; count: 5; slave: 247 from tcp://192.168.1.164:502: Exception Response(131, 3, IllegalAddress)

[canton7]

Aha, that's what I was worried about, thanks -- you don't seem to have access to all of the remote control registers.

Things are a bit slow at the moment as work's hectic, but hopefully that will ease up in the coming couple of weeks.

[williamjeccles]

Will continue the discussion in #518