Replies: 45 comments 2 replies
-
Hi @PskNorz, if it is running firmware v3 or later it should work (e.g. v3.0.8). For previous versions, not at the moment. I'm working on adding v2 support, but I can't test it as all my devices are v3. |
Beta Was this translation helpful? Give feedback.
-
Hi there, i seem to have a dehumidifier with a version 2 firmware, so i can help with testing. I also commented here |
Beta Was this translation helpful? Give feedback.
-
@kskarlatos version 0.4.1 should have initial support for v2. As I can't test it, I'd appreciate any feedback. |
Beta Was this translation helpful? Give feedback.
-
Hi @nbogojevic , thanks for the update. `This error originated from a custom integration. Logger: custom_components.midea_dehumidifier_lan Appliance Dehumidifier15AF has no token, trying to get it from Midea cloud API `This error originated from a custom integration. Logger: homeassistant.config_entries Error setting up entry Midea Dehumidifiers for midea_dehumidifier_lan |
Beta Was this translation helpful? Give feedback.
-
thanks @kskarlatos could you get debug logs for the library via # ...
logger:
# ... your regular logger conf
logs:
custom_components.midea_dehumidifier_lan: debug
midea_beautiful_dehumidifier: debug
# ... |
Beta Was this translation helpful? Give feedback.
-
Here are some logs:
|
Beta Was this translation helpful? Give feedback.
-
Thanks for the logs @kskarlatos . The good news is that library detected the device and got the status, the problem is in integration code. |
Beta Was this translation helpful? Give feedback.
-
@kskarlatos : I've just pushed new version v0.4.2. Could you check it? |
Beta Was this translation helpful? Give feedback.
-
Hi @nbogojevic , thanks for the quick update! it worked, and it found the dehumidifier. |
Beta Was this translation helpful? Give feedback.
-
same thing |
Beta Was this translation helpful? Give feedback.
-
Could you run again with notset logging enabled and attach the logs? |
Beta Was this translation helpful? Give feedback.
-
For this one, I'd need more detailed log (debug): # ...
logger:
# ... your regular logger conf
logs:
custom_components.midea_dehumidifier_lan: debug
midea_beautiful_dehumidifier: debug
# ... |
Beta Was this translation helpful? Give feedback.
-
Hello, attached are the logs with the settings you specified |
Beta Was this translation helpful? Give feedback.
-
Ok I think I know where the problem is - it is in https://github.com/nbogojevic/midea-beautiful-dehumidifier/blob/main/midea_beautiful_dehumidifier/lan.py#L564 as the header of the response is not stripped. I've published new version of that library and new version of this integration (v0.4.3). Give it a try. If it doesn't work, try to get again notset level of logs. |
Beta Was this translation helpful? Give feedback.
-
@nbogojevic I did the same as @Bimboboy007, deleted and reinstalled and now everything works perfectly. So something in the update messed things up (maybe this should be added to the readme). So, thank you again @nbogojevic for your outstanding plugin! |
Beta Was this translation helpful? Give feedback.
-
@nbogojevic you are right i was using parallel two integrations, yours and https://github.com/barban-dev/homeassistant-midea-dehumidifier. Now seems to working, but on fan mode "Silent" the fan entity goes off |
Beta Was this translation helpful? Give feedback.
-
It is by design - as there are only 3 settings I assume that Silent is off (even if it is not) and all the others are on. Otherwise switch would have no effect at all. |
Beta Was this translation helpful? Give feedback.
-
I also have questions about how many devices can be integrated at the same time and how does it work with the EVA II and can I remove the devices from the cloud now? |
Beta Was this translation helpful? Give feedback.
-
There is no limit in the integration but there may be a limit on Midea/msmart cloud, but I don't think so. |
Beta Was this translation helpful? Give feedback.
-
So the following problem now occurs in the logs. Unable to send data after 3 retries, last error [Errno 32] Broken pipe for id=17592186114862 ip=192.168.178.37:6444 version=2 Logger: midea_beautiful_dehumidifier.lan Connection error: id=17592186114862 ip=192.168.178.37:6444 version=2 for timed out Unable to send data after 3 retries, last error for id=18691697852469 ip=192.168.178.52:6444 version=3 |
Beta Was this translation helpful? Give feedback.
-
That is due to something on the network. Both errors are system errors, coming from Linux and not from integration itself. First error means that socket connection was probably closed or cut on the other side (dehumidifier), second one would mean that actually dehumidifier is no longer reachable over network - which probably means it is down or that network connection between it and router was cut. |
Beta Was this translation helpful? Give feedback.
-
Hello, a short report. Today I updated again to the latest version and the same problem as last time, update does not work. |
Beta Was this translation helpful? Give feedback.
-
Hello, somehow there are still problems, because today I entered something in the file editor so that I had to restart the server, the integration was not loaded and the devices were gone only after deactivating and reactivating with a subsequent server restart helped. |
Beta Was this translation helpful? Give feedback.
-
Hi @Bimboboy007 , it is difficult have any idea without logs. Can you get logs as described above? |
Beta Was this translation helpful? Give feedback.
-
Hello, I'll get in touch and pass the log on if the error occurs again. |
Beta Was this translation helpful? Give feedback.
-
Hello, do you know someone who has already dealt with wechat mini-programs integration in HA. |
Beta Was this translation helpful? Give feedback.
-
Hello I have the same Dehumidifier but my firmware in the app INVMATE II shows 056004051538. What kind of version is this ? Could I try this specific integration in HA or not ? Thanks |
Beta Was this translation helpful? Give feedback.
-
Doesn't matter best the latest should work. |
Beta Was this translation helpful? Give feedback.
-
Ok. I will try it just for the feedback to the creator then. |
Beta Was this translation helpful? Give feedback.
-
Hello
Does Inventor EVA II PRO EP3-WiFi20L supported?
Beta Was this translation helpful? Give feedback.
All reactions