In addition to being primarily for version control, Git also provides a couple commands to help you debug your source code projects. Because Git is designed to handle nearly any type of content, these tools are pretty generic, but they can often help you hunt for a bug or culprit when things go wrong.
If you track down a bug in your code and want to know when it was introduced and why, file annotation is often your best tool.
It shows you what commit was the last to modify each line of any file.
So if you see that a method in your code is buggy, you can annotate the file with git blame to determine which commit was responsible for the introduction of that line.
The following example uses git blame to determine which commit and committer was responsible for lines in the top-level Linux kernel Makefile and, further, uses the -L option to restrict the output of the annotation to lines 69 through 82 of that file:
$ git blame -L 69,82 Makefile
b8b0618cf6fab (Cheng Renquan 2009-05-26 16:03:07 +0800 69) ifeq ("$(origin V)", "command line")
b8b0618cf6fab (Cheng Renquan 2009-05-26 16:03:07 +0800 70) KBUILD_VERBOSE = $(V)
^1da177e4c3f4 (Linus Torvalds 2005-04-16 15:20:36 -0700 71) endif
^1da177e4c3f4 (Linus Torvalds 2005-04-16 15:20:36 -0700 72) ifndef KBUILD_VERBOSE
^1da177e4c3f4 (Linus Torvalds 2005-04-16 15:20:36 -0700 73) KBUILD_VERBOSE = 0
^1da177e4c3f4 (Linus Torvalds 2005-04-16 15:20:36 -0700 74) endif
^1da177e4c3f4 (Linus Torvalds 2005-04-16 15:20:36 -0700 75)
066b7ed955808 (Michal Marek 2014-07-04 14:29:30 +0200 76) ifeq ($(KBUILD_VERBOSE),1)
066b7ed955808 (Michal Marek 2014-07-04 14:29:30 +0200 77) quiet =
066b7ed955808 (Michal Marek 2014-07-04 14:29:30 +0200 78) Q =
066b7ed955808 (Michal Marek 2014-07-04 14:29:30 +0200 79) else
066b7ed955808 (Michal Marek 2014-07-04 14:29:30 +0200 80) quiet=quiet_
066b7ed955808 (Michal Marek 2014-07-04 14:29:30 +0200 81) Q = @
066b7ed955808 (Michal Marek 2014-07-04 14:29:30 +0200 82) endifNotice that the first field is the partial SHA-1 of the commit that last modified that line.
The next two fields are values extracted from that commit — the author name and the authored date of that commit — so you can easily see who modified that line and when.
After that come the line number and the content of the file.
Also note the ^1da177e4c3f4 commit lines, where the ^ prefix designates lines that were introduced in the repository’s initial commit and have remained unchanged ever since.
This is a tad confusing, because now you’ve seen at least three different ways that Git uses the ^ to modify a commit SHA-1, but that is what it means here.
Another cool thing about Git is that it doesn’t track file renames explicitly.
It records the snapshots and then tries to figure out what was renamed implicitly, after the fact.
One of the interesting features of this is that you can ask it to figure out all sorts of code movement as well.
If you pass -C to git blame, Git analyzes the file you’re annotating and tries to figure out where snippets of code within it originally came from if they were copied from elsewhere.
For example, say you are refactoring a file named GITServerHandler.m into multiple files, one of which is GITPackUpload.m.
By blaming GITPackUpload.m with the -C option, you can see where sections of the code originally came from:
$ git blame -C -L 141,153 GITPackUpload.m
f344f58d GITServerHandler.m (Scott 2009-01-04 141)
f344f58d GITServerHandler.m (Scott 2009-01-04 142) - (void) gatherObjectShasFromC
f344f58d GITServerHandler.m (Scott 2009-01-04 143) {
70befddd GITServerHandler.m (Scott 2009-03-22 144) //NSLog(@"GATHER COMMI
ad11ac80 GITPackUpload.m (Scott 2009-03-24 145)
ad11ac80 GITPackUpload.m (Scott 2009-03-24 146) NSString *parentSha;
ad11ac80 GITPackUpload.m (Scott 2009-03-24 147) GITCommit *commit = [g
ad11ac80 GITPackUpload.m (Scott 2009-03-24 148)
ad11ac80 GITPackUpload.m (Scott 2009-03-24 149) //NSLog(@"GATHER COMMI
ad11ac80 GITPackUpload.m (Scott 2009-03-24 150)
56ef2caf GITServerHandler.m (Scott 2009-01-05 151) if(commit) {
56ef2caf GITServerHandler.m (Scott 2009-01-05 152) [refDict setOb
56ef2caf GITServerHandler.m (Scott 2009-01-05 153)This is really useful. Normally, you get as the original commit the commit where you copied the code over, because that is the first time you touched those lines in this file. Git tells you the original commit where you wrote those lines, even if it was in another file.
Annotating a file helps if you know where the issue is to begin with.
If you don’t know what is breaking, and there have been dozens or hundreds of commits since the last state where you know the code worked, you’ll likely turn to git bisect for help.
The bisect command does a binary search through your commit history to help you identify as quickly as possible which commit introduced an issue.
Let’s say you just pushed out a release of your code to a production environment, you’re getting bug reports about something that wasn’t happening in your development environment, and you can’t imagine why the code is doing that.
You go back to your code, and it turns out you can reproduce the issue, but you can’t figure out what is going wrong.
You can bisect the code to find out.
First you run git bisect start to get things going, and then you use git bisect bad to tell the system that the current commit you’re on is broken.
Then, you must tell bisect when the last known good state was, using git bisect good <good_commit>:
$ git bisect start
$ git bisect bad
$ git bisect good v1.0
Bisecting: 6 revisions left to test after this
[ecb6e1bc347ccecc5f9350d878ce677feb13d3b2] error handling on repoGit figured out that about 12 commits came between the commit you marked as the last good commit (v1.0) and the current bad version, and it checked out the middle one for you.
At this point, you can run your test to see if the issue exists as of this commit.
If it does, then it was introduced sometime before this middle commit; if it doesn’t, then the problem was introduced sometime after the middle commit.
It turns out there is no issue here, and you tell Git that by typing git bisect good and continue your journey:
$ git bisect good
Bisecting: 3 revisions left to test after this
[b047b02ea83310a70fd603dc8cd7a6cd13d15c04] secure this thingNow you’re on another commit, halfway between the one you just tested and your bad commit.
You run your test again and find that this commit is broken, so you tell Git that with git bisect bad:
$ git bisect bad
Bisecting: 1 revisions left to test after this
[f71ce38690acf49c1f3c9bea38e09d82a5ce6014] drop exceptions tableThis commit is fine, and now Git has all the information it needs to determine where the issue was introduced. It tells you the SHA-1 of the first bad commit and show some of the commit information and which files were modified in that commit so you can figure out what happened that may have introduced this bug:
$ git bisect good
b047b02ea83310a70fd603dc8cd7a6cd13d15c04 is first bad commit
commit b047b02ea83310a70fd603dc8cd7a6cd13d15c04
Author: PJ Hyett <pjhyett@example.com>
Date: Tue Jan 27 14:48:32 2009 -0800
secure this thing
:040000 040000 40ee3e7821b895e52c1695092db9bdc4c61d1730
f24d3c6ebcfc639b1a3814550e62d60b8e68a8e4 M configWhen you’re finished, you should run git bisect reset to reset your HEAD to where you were before you started, or you’ll end up in a weird state:
$ git bisect resetThis is a powerful tool that can help you check hundreds of commits for an introduced bug in minutes.
In fact, if you have a script that will exit 0 if the project is good or non-0 if the project is bad, you can fully automate git bisect.
First, you again tell it the scope of the bisect by providing the known bad and good commits.
You can do this by listing them with the bisect start command if you want, listing the known bad commit first and the known good commit second:
$ git bisect start HEAD v1.0
$ git bisect run test-error.shDoing so automatically runs test-error.sh on each checked-out commit until Git finds the first broken commit.
You can also run something like make or make tests or whatever you have that runs automated tests for you.