printer-20230711_183054.cfg

[include ConfigFiles/includes.cfg]
[exclude_object]

#*# <---------------------- SAVE_CONFIG ---------------------->
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
#*#
#*# [probe]
#*# z_offset = -1.140
#*#
#*# [heater_bed]
#*# control = pid
#*# pid_kp = 43.789
#*# pid_ki = 1.248
#*# pid_kd = 384.252
#*#
#*# [extruder]
#*# control = pid
#*# pid_kp = 26.927
#*# pid_ki = 2.849
#*# pid_kd = 63.615
#*#
#*# [input_shaper]
#*# shaper_type_x = zv
#*# shaper_freq_x = 59.0
#*# shaper_type_y = mzv
#*# shaper_freq_y = 41.0
#*#
#*# [bed_mesh default]
#*# version = 1
#*# points =
#*# 	0.102500, 0.127500, 0.085000, 0.091250, 0.102500, 0.137500, 0.092500
#*# 	0.057500, 0.063750, 0.066250, 0.060000, 0.077500, 0.072500, 0.071250
#*# 	-0.006250, 0.006250, 0.058750, 0.052500, 0.065000, 0.058750, 0.012500
#*# 	-0.022500, -0.008750, -0.010000, -0.005000, -0.001250, 0.008750, 0.003750
#*# 	-0.057500, -0.001250, -0.008750, 0.000000, 0.002500, -0.016250, -0.012500
#*# 	-0.038750, -0.015000, 0.003750, -0.006250, -0.045000, -0.013750, 0.001250
#*# 	-0.037500, -0.007500, -0.005000, 0.053750, -0.001250, -0.020000, -0.037500
#*# 	0.021250, 0.047500, 0.058750, 0.062500, 0.067500, 0.041250, 0.023750
#*# 	0.105000, 0.072500, 0.121250, 0.115000, 0.115000, 0.075000, 0.086250
#*# tension = 0.2
#*# min_x = 64.0
#*# algo = bicubic
#*# y_count = 9
#*# mesh_y_pps = 2
#*# min_y = 46.0
#*# x_count = 7
#*# max_y = 302.96
#*# mesh_x_pps = 2
#*# max_x = 284.98