diff --git a/openandroidinstaller/assets/configs/avicii.yaml b/openandroidinstaller/assets/configs/avicii.yaml
index 5e8443b2..f9008bcb 100644
--- a/openandroidinstaller/assets/configs/avicii.yaml
+++ b/openandroidinstaller/assets/configs/avicii.yaml
@@ -21,7 +21,8 @@ steps:
         Once it's done, press continue here.
       command: fastboot_oem_unlock
     - type: confirm_button
-      content: The bootloader is now unlocked. Since the device resets completely, you will need to re-enable Developer Options and USB debugging to continue.
+      content: > 
+        The bootloader is now unlocked. Since the device resets completely, you will need to re-enable Developer Options and USB debugging to continue.
   boot_recovery:
     - type: call_button
       content: >
@@ -30,14 +31,15 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      content: Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
+      content: >
+        Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
     - type: call_button
-      command: adb_twrp_copy_partitions
       content: >
         In some cases, the inactive slot can be unpopulated or contain much older firmware than the active slot, leading to various issues including a potential hard-brick.
         We can ensure none of that will happen by copying the contents of the active slot to the inactive slot. Press 'confirm and run' to to this. Once you are in the bootloader again, continue.
+      command: adb_twrp_copy_partitions
     - type: call_button
-      command: fastboot_boot_recovery
       content: >
-        Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
\ No newline at end of file
+        Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
+      command: fastboot_boot_recovery
\ No newline at end of file
diff --git a/openandroidinstaller/assets/configs/cheeseburger.yaml b/openandroidinstaller/assets/configs/cheeseburger.yaml
index a04fd467..f24ce440 100644
--- a/openandroidinstaller/assets/configs/cheeseburger.yaml
+++ b/openandroidinstaller/assets/configs/cheeseburger.yaml
@@ -20,7 +20,8 @@ steps:
         Once it's done, press continue here.
       command: fastboot_oem_unlock
     - type: confirm_button
-      content: The bootloader is now unlocked. Since the device resets completely, you will need to re-enable Developer Options and USB debugging to continue.
+      content: > 
+        The bootloader is now unlocked. Since the device resets completely, you will need to re-enable Developer Options and USB debugging to continue.
   boot_recovery:
     - type: call_button
       content: >
@@ -29,5 +30,6 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      content: Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
+      content: >
+        Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
\ No newline at end of file
diff --git a/openandroidinstaller/assets/configs/dre.yaml b/openandroidinstaller/assets/configs/dre.yaml
index 528035ce..ffefc560 100644
--- a/openandroidinstaller/assets/configs/dre.yaml
+++ b/openandroidinstaller/assets/configs/dre.yaml
@@ -21,7 +21,8 @@ steps:
         Once it's done, press continue here.
       command: fastboot_oem_unlock
     - type: confirm_button
-      content: The bootloader is now unlocked. Since the device resets completely, you will need to re-enable Developer Options and USB debugging to continue.
+      content: > 
+        The bootloader is now unlocked. Since the device resets completely, you will need to re-enable Developer Options and USB debugging to continue.
   boot_recovery:
     - type: call_button
       content: >
@@ -30,14 +31,15 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      content: Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
+      content: >
+        Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
     - type: call_button
-      command: adb_twrp_copy_partitions
       content: >
         In some cases, the inactive slot can be unpopulated or contain much older firmware than the active slot, leading to various issues including a potential hard-brick.
         We can ensure none of that will happen by copying the contents of the active slot to the inactive slot. Press 'confirm and run' to to this. Once you are in the bootloader again, continue.
+      command: adb_twrp_copy_partitions
     - type: call_button
-      command: fastboot_boot_recovery
       content: >
-        Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
\ No newline at end of file
+        Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
+      command: fastboot_boot_recovery
\ No newline at end of file
diff --git a/openandroidinstaller/assets/configs/dumpling.yaml b/openandroidinstaller/assets/configs/dumpling.yaml
index 684f8a62..289ef905 100644
--- a/openandroidinstaller/assets/configs/dumpling.yaml
+++ b/openandroidinstaller/assets/configs/dumpling.yaml
@@ -20,7 +20,8 @@ steps:
         Once it's done, press continue here.
       command: fastboot_oem_unlock
     - type: confirm_button
-      content: The bootloader is now unlocked. Since the device resets completely, you will need to re-enable Developer Options and USB debugging to continue.
+      content: > 
+        The bootloader is now unlocked. Since the device resets completely, you will need to re-enable Developer Options and USB debugging to continue.
   boot_recovery:
     - type: call_button
       content: >
@@ -29,5 +30,6 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      content: Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
+      content: >
+        Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
\ No newline at end of file
diff --git a/openandroidinstaller/assets/configs/enchilada.yaml b/openandroidinstaller/assets/configs/enchilada.yaml
index 63ae03c3..ad8de76f 100644
--- a/openandroidinstaller/assets/configs/enchilada.yaml
+++ b/openandroidinstaller/assets/configs/enchilada.yaml
@@ -21,7 +21,8 @@ steps:
         Once it's done, press continue here.
       command: fastboot_oem_unlock
     - type: confirm_button
-      content: The bootloader is now unlocked. Since the device resets completely, you will need to re-enable Developer Options and USB debugging to continue.
+      content: > 
+        The bootloader is now unlocked. Since the device resets completely, you will need to re-enable Developer Options and USB debugging to continue.
   boot_recovery:
     - type: call_button
       content: >
@@ -30,14 +31,15 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      content: Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
+      content: >
+        Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
     - type: call_button
-      command: adb_twrp_copy_partitions
       content: >
         In some cases, the inactive slot can be unpopulated or contain much older firmware than the active slot, leading to various issues including a potential hard-brick.
         We can ensure none of that will happen by copying the contents of the active slot to the inactive slot. Press 'confirm and run' to to this. Once you are in the bootloader again, continue.
+      command: adb_twrp_copy_partitions
     - type: call_button
-      command: fastboot_boot_recovery
       content: >
-        Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
\ No newline at end of file
+        Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
+      command: fastboot_boot_recovery
\ No newline at end of file
diff --git a/openandroidinstaller/assets/configs/fajita.yaml b/openandroidinstaller/assets/configs/fajita.yaml
index bf40e645..146b8faa 100644
--- a/openandroidinstaller/assets/configs/fajita.yaml
+++ b/openandroidinstaller/assets/configs/fajita.yaml
@@ -21,7 +21,8 @@ steps:
         Once it's done, press continue here.
       command: fastboot_oem_unlock
     - type: confirm_button
-      content: The bootloader is now unlocked. Since the device resets completely, you will need to re-enable Developer Options and USB debugging to continue.
+      content: > 
+        The bootloader is now unlocked. Since the device resets completely, you will need to re-enable Developer Options and USB debugging to continue.
   boot_recovery:
     - type: call_button
       content: >
@@ -30,14 +31,15 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      content: Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
+      content: >
+        Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
     - type: call_button
-      command: adb_twrp_copy_partitions
       content: >
         In some cases, the inactive slot can be unpopulated or contain much older firmware than the active slot, leading to various issues including a potential hard-brick.
         We can ensure none of that will happen by copying the contents of the active slot to the inactive slot. Press 'confirm and run' to to this. Once you are in the bootloader again, continue.
+      command: adb_twrp_copy_partitions
     - type: call_button
-      command: fastboot_boot_recovery
       content: >
-        Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
\ No newline at end of file
+        Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
+      command: fastboot_boot_recovery
\ No newline at end of file
diff --git a/openandroidinstaller/assets/configs/guacamole.yaml b/openandroidinstaller/assets/configs/guacamole.yaml
index cafa1880..15735b45 100644
--- a/openandroidinstaller/assets/configs/guacamole.yaml
+++ b/openandroidinstaller/assets/configs/guacamole.yaml
@@ -21,7 +21,8 @@ steps:
         Once it's done, press continue here.
       command: fastboot_oem_unlock
     - type: confirm_button
-      content: The bootloader is now unlocked. Since the device resets completely, you will need to re-enable Developer Options and USB debugging to continue.
+      content: > 
+        The bootloader is now unlocked. Since the device resets completely, you will need to re-enable Developer Options and USB debugging to continue.
   boot_recovery:
     - type: call_button
       content: >
@@ -30,5 +31,6 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      content: Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
+      content: >
+        Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
\ No newline at end of file
diff --git a/openandroidinstaller/assets/configs/guacamoleb.yaml b/openandroidinstaller/assets/configs/guacamoleb.yaml
index 5035a23a..83b93a50 100644
--- a/openandroidinstaller/assets/configs/guacamoleb.yaml
+++ b/openandroidinstaller/assets/configs/guacamoleb.yaml
@@ -21,7 +21,8 @@ steps:
         Once it's done, press continue here.
       command: fastboot_oem_unlock
     - type: confirm_button
-      content: The bootloader is now unlocked. Since the device resets completely, you will need to re-enable Developer Options and USB debugging to continue.
+      content: > 
+        The bootloader is now unlocked. Since the device resets completely, you will need to re-enable Developer Options and USB debugging to continue.
   boot_recovery:
     - type: call_button
       content: >
@@ -30,5 +31,6 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      content: Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
+      content: >
+        Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
\ No newline at end of file
diff --git a/openandroidinstaller/assets/configs/hotdog.yaml b/openandroidinstaller/assets/configs/hotdog.yaml
index a7b652a5..bbf5e103 100644
--- a/openandroidinstaller/assets/configs/hotdog.yaml
+++ b/openandroidinstaller/assets/configs/hotdog.yaml
@@ -21,7 +21,8 @@ steps:
         Once it's done, press continue here.
       command: fastboot_oem_unlock
     - type: confirm_button
-      content: The bootloader is now unlocked. Since the device resets completely, you will need to re-enable Developer Options and USB debugging to continue.
+      content: > 
+        The bootloader is now unlocked. Since the device resets completely, you will need to re-enable Developer Options and USB debugging to continue.
   boot_recovery:
     - type: call_button
       content: >
@@ -30,5 +31,6 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      content: Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
+      content: >
+        Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
\ No newline at end of file
diff --git a/openandroidinstaller/assets/configs/hotdogb.yaml b/openandroidinstaller/assets/configs/hotdogb.yaml
index ca2bdeda..2d55d948 100644
--- a/openandroidinstaller/assets/configs/hotdogb.yaml
+++ b/openandroidinstaller/assets/configs/hotdogb.yaml
@@ -21,7 +21,8 @@ steps:
         Once it's done, press continue here.
       command: fastboot_oem_unlock
     - type: confirm_button
-      content: The bootloader is now unlocked. Since the device resets completely, you will need to re-enable Developer Options and USB debugging to continue.
+      content: > 
+        The bootloader is now unlocked. Since the device resets completely, you will need to re-enable Developer Options and USB debugging to continue.
   boot_recovery:
     - type: call_button
       content: >
@@ -30,5 +31,6 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
-      content: Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
+      content: >
+        Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
\ No newline at end of file