diff --git a/openandroidinstaller/assets/configs/FP2.yaml b/openandroidinstaller/assets/configs/FP2.yaml index e0b32a05..e421a59d 100644 --- a/openandroidinstaller/assets/configs/FP2.yaml +++ b/openandroidinstaller/assets/configs/FP2.yaml @@ -10,13 +10,13 @@ steps: boot_recovery: - type: call_button content: > - Now you need to boot a custom recovery system on the phone. A recovery is a small subsystem on your phone, that manages updating, + Now you need to boot a custom recovery system on the phone. A recovery is a small subsystem on your phone, that manages updating, adapting and repairing of the operating system. - + Make sure your device is turned on and connected to the computer. Boot into the bootloader by pressing 'Confirm and run' here. Then continue. command: adb_reboot_bootloader - type: call_button img: twrp-start.jpeg content: > Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue. - command: fastboot_boot_recovery \ No newline at end of file + command: fastboot_boot_recovery diff --git a/openandroidinstaller/assets/configs/FP3.yaml b/openandroidinstaller/assets/configs/FP3.yaml index 1b25061c..6de90c06 100644 --- a/openandroidinstaller/assets/configs/FP3.yaml +++ b/openandroidinstaller/assets/configs/FP3.yaml @@ -45,7 +45,7 @@ steps: content: > The bootloader is now unlocked. Since the device resets completely, you will need to re-enable USB debugging to continue. boot_recovery: - - type: confirm_button + - type: confirm_button content: > Now you need to boot a custom recovery system on the phone. A recovery is a small subsystem on your phone, that manages updating, adapting and repairing of the operating system. @@ -57,4 +57,4 @@ steps: img: twrp-start.jpeg content: > Once the device is in fastboot mode, flash the custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue. - command: fastboot_boot_recovery \ No newline at end of file + command: fastboot_boot_recovery diff --git a/openandroidinstaller/assets/configs/FP4.yaml b/openandroidinstaller/assets/configs/FP4.yaml index d23501a3..7e14c899 100644 --- a/openandroidinstaller/assets/configs/FP4.yaml +++ b/openandroidinstaller/assets/configs/FP4.yaml @@ -45,7 +45,7 @@ steps: content: > The bootloader is now unlocked. Since the device resets completely, you will need to re-enable USB debugging to continue. boot_recovery: - - type: confirm_button + - type: confirm_button content: > Now you need to boot a custom recovery system on the phone. A recovery is a small subsystem on your phone, that manages updating, adapting and repairing of the operating system. @@ -57,4 +57,4 @@ steps: img: twrp-start.jpeg content: > Once the device is in fastboot mode, boot the custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue. - command: fastboot_boot_recovery \ No newline at end of file + command: fastboot_boot_recovery diff --git a/openandroidinstaller/assets/configs/enchilada.yaml b/openandroidinstaller/assets/configs/enchilada.yaml index cb859bb0..33f44a1c 100644 --- a/openandroidinstaller/assets/configs/enchilada.yaml +++ b/openandroidinstaller/assets/configs/enchilada.yaml @@ -2,7 +2,7 @@ metadata: maintainer: Tobias Sterbak (tsterbak) device_name: OnePlus 6 is_ab_device: true - device_code: enchilada + device_code: enchilada supported_device_codes: - enchilada - OnePlus6 @@ -22,7 +22,7 @@ steps: Once it's done, press continue here. command: fastboot_oem_unlock - type: confirm_button - content: > + content: > The bootloader is now unlocked. Since the device resets completely, you will need to re-enable Developer Options and USB debugging to continue. boot_recovery: - type: call_button @@ -45,4 +45,4 @@ steps: img: twrp-start.jpeg content: > Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue. - command: fastboot_boot_recovery \ No newline at end of file + command: fastboot_boot_recovery diff --git a/openandroidinstaller/assets/configs/evert.yaml b/openandroidinstaller/assets/configs/evert.yaml index 8b77de36..c717316f 100644 --- a/openandroidinstaller/assets/configs/evert.yaml +++ b/openandroidinstaller/assets/configs/evert.yaml @@ -2,18 +2,18 @@ metadata: maintainer: Tobias Sterbak (tsterbak) device_name: Motorola moto g6 plus is_ab_device: true - device_code: evert + device_code: evert supported_device_codes: - evert - evert_n steps: unlock_bootloader: - - type: call_button + - type: call_button command: adb_reboot_bootloader content: > As a first step, you need to unlock the bootloader of your device. A bootloader is the piece of software, that tells your phone how to start and run an operating system (like Android). You need to boot into fastboot mode by pressing the 'Confirm and run' button. Then continue. - - type: call_button + - type: call_button command: fastboot_get_unlock_data content: > Now you need to get your device ID to get an unlock code from Motorola. Press 'Confirm and run' to get the ID. (You need to toggle 'Advanced Output' here to see it.) @@ -36,7 +36,7 @@ steps: command: fastboot_unlock_with_code - type: call_button content: > - Press the button to reboot. Since the device resets completely, you will need to re-enable USB debugging to continue. + Press the button to reboot. Since the device resets completely, you will need to re-enable USB debugging to continue. Connect your device to your PC via USB. Then confirm here to continue. command: fastboot_reboot boot_recovery: diff --git a/openandroidinstaller/assets/configs/flame.yaml b/openandroidinstaller/assets/configs/flame.yaml index b8151709..20267b5e 100644 --- a/openandroidinstaller/assets/configs/flame.yaml +++ b/openandroidinstaller/assets/configs/flame.yaml @@ -2,9 +2,9 @@ metadata: maintainer: Tobias Sterbak (tsterbak) device_name: Pixel 4 is_ab_device: true - device_code: flame + device_code: flame supported_device_codes: - - flame + - flame additional_steps: - dtbo requirements: @@ -39,7 +39,7 @@ steps: content: > The bootloader is now unlocked. Since the device resets completely, you will need to re-enable USB debugging to continue. boot_recovery: - - type: confirm_button + - type: confirm_button content: > Now you need to boot a custom recovery system on the phone. A recovery is a small subsystem on your phone, that manages updating, adapting and repairing of the operating system. @@ -54,4 +54,4 @@ steps: img: twrp-start.jpeg content: > Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue. - command: fastboot_boot_recovery \ No newline at end of file + command: fastboot_boot_recovery diff --git a/openandroidinstaller/assets/configs/grandprimevelte.yaml b/openandroidinstaller/assets/configs/grandprimevelte.yaml index 2ac226c0..ab7cf695 100644 --- a/openandroidinstaller/assets/configs/grandprimevelte.yaml +++ b/openandroidinstaller/assets/configs/grandprimevelte.yaml @@ -13,8 +13,8 @@ steps: boot_recovery: - type: call_button content: > - As a first step, you need to boot into the bootloader. A bootloader is the piece of software, - that tells your phone how to start and run an operating system (like Android). Your device should be turned on. + As a first step, you need to boot into the bootloader. A bootloader is the piece of software, + that tells your phone how to start and run an operating system (like Android). Your device should be turned on. Then press 'Confirm and run' to reboot into the bootloader. Continue once it's done. command: adb_reboot_download - type: call_button @@ -25,6 +25,6 @@ steps: - type: confirm_button img: samsung-buttons.png content: > - Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Power buttons* for 8~10 seconds - until the screen turns black & release the buttons immediately when it does, then boot to recovery with the device powered off, - hold *Volume Up* + *Home* + *Power button*. \ No newline at end of file + Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Power buttons* for 8~10 seconds + until the screen turns black & release the buttons immediately when it does, then boot to recovery with the device powered off, + hold *Volume Up* + *Home* + *Power button*. diff --git a/openandroidinstaller/assets/configs/greatlte.yaml b/openandroidinstaller/assets/configs/greatlte.yaml index 792852fa..920a8504 100644 --- a/openandroidinstaller/assets/configs/greatlte.yaml +++ b/openandroidinstaller/assets/configs/greatlte.yaml @@ -2,16 +2,16 @@ metadata: maintainer: Michel Memeteau (freechelmi) device_name: Samsung Galaxy note 8 is_ab_device: false - device_code: greatlte + device_code: greatlte supported_device_codes: - - greatlte + - greatlte steps: unlock_bootloader: boot_recovery: - type: call_button content: > - As a first step, you need to boot into the bootloader. A bootloader is the piece of software, - that tells your phone how to start and run an operating system (like Android). Your device should be turned on. + As a first step, you need to boot into the bootloader. A bootloader is the piece of software, + that tells your phone how to start and run an operating system (like Android). Your device should be turned on. Then press 'Confirm and run' to reboot into the bootloader. Continue once it's done. command: adb_reboot_download - type: call_button @@ -22,5 +22,5 @@ steps: - type: confirm_button img: samsung-buttons-bixby.png content: > - Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Power buttons* for 8~10 seconds - until the screen turns black to reboot & release the buttons immediately when it does, then immediately hold *Volume Up* + *Bixby* + *Power button* until you are in recovery mode. \ No newline at end of file + Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Power buttons* for 8~10 seconds + until the screen turns black to reboot & release the buttons immediately when it does, then immediately hold *Volume Up* + *Bixby* + *Power button* until you are in recovery mode. diff --git a/openandroidinstaller/assets/configs/gts210vewifi.yaml b/openandroidinstaller/assets/configs/gts210vewifi.yaml index 502ea606..faaaead7 100644 --- a/openandroidinstaller/assets/configs/gts210vewifi.yaml +++ b/openandroidinstaller/assets/configs/gts210vewifi.yaml @@ -1,7 +1,7 @@ metadata: maintainer: Michel Memeteau (freechelmi) - device_name: Samsung Galaxy Tab S2 (T813 2016) - is_ab_device: false + device_name: Samsung Galaxy Tab S2 (T813 2016) + is_ab_device: false device_code: gts210vewifi supported_device_codes: - gts210vewifi @@ -10,8 +10,8 @@ steps: boot_recovery: - type: call_button content: > - As a first step, you need to boot into the bootloader. A bootloader is the piece of software, - that tells your phone how to start and run an operating system (like Android). Your device should be turned on. + As a first step, you need to boot into the bootloader. A bootloader is the piece of software, + that tells your phone how to start and run an operating system (like Android). Your device should be turned on. Then press 'Confirm and run' to reboot into the bootloader. Continue once it's done. command: adb_reboot_download - type: call_button @@ -22,6 +22,6 @@ steps: - type: confirm_button img: samsung-buttons.png content: > - Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Power buttons* for 8~10 seconds - until the screen turns black & release the buttons immediately when it does, then boot to recovery with the device powered off, - hold *Volume Up* + *Home* + *Power button*. \ No newline at end of file + Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Power buttons* for 8~10 seconds + until the screen turns black & release the buttons immediately when it does, then boot to recovery with the device powered off, + hold *Volume Up* + *Home* + *Power button*. diff --git a/openandroidinstaller/assets/configs/guacamoleb.yaml b/openandroidinstaller/assets/configs/guacamoleb.yaml index 2962717d..5b4230cb 100644 --- a/openandroidinstaller/assets/configs/guacamoleb.yaml +++ b/openandroidinstaller/assets/configs/guacamoleb.yaml @@ -5,7 +5,7 @@ metadata: device_code: guacamoleb supported_device_codes: - guacamoleb - - OnePlus7 + - OnePlus7 additional_steps: - dtbo - vbmeta @@ -39,3 +39,4 @@ steps: content: > Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue. command: fastboot_boot_recovery + diff --git a/openandroidinstaller/assets/configs/hltetmo.yaml b/openandroidinstaller/assets/configs/hltetmo.yaml index b0d186c5..4126f480 100644 --- a/openandroidinstaller/assets/configs/hltetmo.yaml +++ b/openandroidinstaller/assets/configs/hltetmo.yaml @@ -2,9 +2,13 @@ metadata: maintainer: Tobias Sterbak (tsterbak) device_name: Samsung Galaxy Note 3 LTE (N900T/V/W8) is_ab_device: false - device_code: hltetmo + device_code: hltetmo supported_device_codes: - - hltetmo + - hltetmo + - hlte + - hltecan + - hlteusc + - hltevzw steps: unlock_bootloader: boot_recovery: @@ -22,6 +26,6 @@ steps: - type: confirm_button img: samsung-buttons.png content: > - Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Power buttons* for - 8~10 seconds until the screen turns black & release the buttons immediately when it does, then boot to recovery with the device powered off, - hold *Volume Up* + *Home* + *Power*. Confirm when the recovery screen appears. \ No newline at end of file + Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Power buttons* for + 8~10 seconds until the screen turns black & release the buttons immediately when it does, then boot to recovery with the device powered off, + hold *Volume Up* + *Home* + *Power*. Confirm when the recovery screen appears.