Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Kernel panic - not syncing: An NMI occurred #4102

Closed
laris opened this issue Dec 14, 2015 · 1 comment
Closed

Kernel panic - not syncing: An NMI occurred #4102

laris opened this issue Dec 14, 2015 · 1 comment

Comments

@laris
Copy link

laris commented Dec 14, 2015

Proxmox 4.0

Linux version 4.2.2-1-pve (root@elsa) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Mon Oct 5 18:23:31 CEST 2015 ()
[ 0.000000] Command line: BOOT_IMAGE=/ROOT/pve-1@/boot/vmlinuz-4.2.2-1-pve ro ot=ZFS=/ROOT/pve-1 ro boot=zfs root=ZFS=rpool/ROOT/pve-1 boot=zfs console=tty0 c onsole=ttyS0,115200

$ ssh root@192.168.1.111
root@192.168.1.111's password:
User:root logged-in to iLOHPMSGen8-2.(192.168.1.112 / )

iLO 4 Advanced 2.30 at Aug 19 2015
Server Name: HPMSGen8-2
Server Power: On

Based on customer feedback, we will be enhancing the SSH command line
interface in a future release of the iLO 4 firmware. Our future CLI will
focus on increased usability and improved functionality. This message is
to provide advance notice of the coming change. Please see the iLO 4
Release Notes on www.hp.com/go/iLO for additional information.

</>hpiLO-> vsp

Virtual Serial Port Active: COM1

Starting virtual serial port.
Press 'ESC (' to return to the CLI Session.
16 GB Installed

ProLiant System BIOS - J06 (07/16/2015)
Copyright 1982, 2015 Hewlett-Packard Development Company, L.P.

1 Processor(s) detected, 4 total cores enabled, , Hyperthreading is enabled
Proc 1: Intel(R) Xeon(R) CPU E3-1230 V2 @ 3.30GHz
HP Power Profile Mode: Balanced Power and Performance
Power Regulator Mode: Dynamic Power Savings

Redundant ROM Detected - This system contains a valid backup System ROM.
Inlet Ambient Temperature: 21C/69F

HP AHCI SATA Controller (v0.90)
Copyright (c) 2011, Hewlett-Packard Development Company, L.P.
Port1: S.M.A.R.T Capable Hard Disk - WDC WD30EZRX-00D8PB0
Port2: S.M.A.R.T Capable Hard Disk - WDC WD30EZRX-00D8PB0
Port3: S.M.A.R.T Capable Hard Disk - WDC WD30EZRZ-00WN9B0
Port4: S.M.A.R.T Capable Hard Disk - WDC WD30EZRZ-00WN9B0 <F9 = Setup>
Port5: S.M.A.R.T Capable Hard Disk - MTFDDAK512MAM-1K1

HP AHCI SATA Controller (v0.84)

Copyright (c) 2011, Hewlett-Packard Development Company, L.P.

iLO 4 Advanced
iLO 4 v2.30 Aug 19 2015 192.168.1.112

LSI Corporation MPT SAS2 BIOS
MPT2BIOS-7.21.00.00 (2011.08.11)
Copyright 2000-2011 LSI Corporation.

                                                                                                                                                                                                                                                   PCI  ENCL LUN VENDOR   PRODUCT          PRODUCT     SIZE \

SLOT SLOT NUM NAME IDENTIFIER REVISION NVDATA

1 LSI SAS2008-IT 11.00.00.00 0A:03:00:04

LSI Corporation MPT boot ROM, no supported devices found!
Press "F9" key for ROM-Based Setup Utility
Press "F10" key for Intelligent Provisioning
Press "F11" key for Default Boot Override Options
For access via BIOS Serial Console
Press "ESC+9" for ROM-Based Setup Utility
Press "ESC+0" for Intelligent Provisioning
Press "ESC+!" for Default Boot Override Options
Attempting Boot From Hard Drive (C:)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.2.2-1-pve (root@elsa) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Mon Oct 5 18:23:31 CEST 2015 ()
[ 0.000000] Command line: BOOT_IMAGE=/ROOT/pve-1@/boot/vmlinuz-4.2.2-1-pve ro ot=ZFS=/ROOT/pve-1 ro boot=zfs root=ZFS=rpool/ROOT/pve-1 boot=zfs console=tty0 c onsole=ttyS0,115200
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point regis ters'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes , using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000997ff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000099800-0x0000000000099bff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000f1de3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f1de4000-0x00000000f1dedfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000f1dee000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fee0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000040bffefff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] e820: las= 0x40bfff max_arch_pfn = 0x400000000
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xf1de4 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f4f80-0x000f4f8f] mapped at [ffff 8800000f4f80]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] init_memory_mapping: [mem 0x40bc00000-0x40bdfffff]
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x40bbfffff]
[ 0.000000] init_memory_mapping: [mem 0x3e0000000-0x3ffffffff]
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xf1de3fff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3dfffffff]
[ 0.000000] init_memory_mapping: [mem 0x40be00000-0x40bffefff]
[ 0.000000] RAMDISK: [mem 0x34fa0000-0x367c7fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F4F00 000024 (v02 HP )
[ 0.000000] ACPI: XSDT 0x00000000F1DE6400 0000B4 (v01 HP ProLiant 0000000 2 ▒? 0000162E)
[ 0.000000] ACPI: FACP 0x00000000F1DE6540 0000F4 (v03 HP ProLiant 0000000 2 ▒? 0000162E)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aContr olBlock: 16/32 (20150619/tbfadt-623)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm2Contro lBlock: 8/32 (20150619/tbfadt-623)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock : 32, using default 16 (20150619/tbfadt-704)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20150619/tbfadt-704)
[ 0.000000] ACPI: DSDT 0x00000000F1DE6640 001C1A (v01 HP DSDT 0000000 1 INTL 20030228)
[ 0.000000] ACPI: FACS 0x00000000F1DE4140 000040
[ 0.000000] ACPI: FACS 0x00000000F1DE4140 000040
[ 0.000000] ACPI: SPCR 0x00000000F1DE4180 000050 (v01 HP SPCRRBSU 0000000 1 ▒? 0000162E)
[ 0.000000] ACPI: MCFG 0x00000000F1DE4200 00003C (v01 HP ProLiant 000 00000000)
[ 0.000000] ACPI: HPET 0x00000000F1DE4240 000038 (v01 HP ProLiant 0000000 2 ▒? 0000162E)
[ 0.000000] ACPI: FFFF 0x00000000F1DE4280 000064 (v02 HP ProLiant 0000000 2 ▒? 0000162E)
[ 0.000000] ACPI: SPMI 0x00000000F1DE4300 000040 (v05 HP ProLiant 0000000 1 ▒? 0000162E)
[ 0.000000] ACPI: ERST 0x00000000F1DE4340 000230 (v01 HP ProLiant 0000000 1 ▒? 0000162E)
[ 0.000000] ACPI: APIC 0x00000000F1DE4580 000252 (v01 HP ProLiant 0000000 2 00000000)
[ 0.000000] ACPI: FFFF 0x00000000F1DE4800 000176 (v01 HP ProLiant 0000000 1 ▒? 0000162E)
[ 0.000000] ACPI: BERT 0x00000000F1DE4980 000030 (v01 HP ProLiant 0000000 1 ▒? 0000162E)
[ 0.000000] ACPI: HEST 0x00000000F1DE49C0 0000BC (v01 HP ProLiant 0000000 1 ▒? 0000162E)
[ 0.000000] ACPI: DMAR 0x00000000F1DE4A80 0003B4 (v01 HP ProLiant 0000000 1 ▒? 0000162E)
[ 0.000000] ACPI: FFFF 0x00000000F1DE63C0 00002D (v01 HP ProLiant 0000000 1 00000000)
[ 0.000000] ACPI: SSDT 0x00000000F1DE8280 000137 (v03 HP CRSPCI0 0000000 2 HP 00000001)
[ 0.000000] ACPI: SSDT 0x00000000F1DE83C0 000177 (v03 HP riser0 0000000 2 INTL 20030228)
[ 0.000000] ACPI: SSDT 0x00000000F1DE8540 0001E1 (v01 HP pcc 0000000 1 INTL 20090625)
[ 0.000000] ACPI: SSDT 0x00000000F1DE8740 000377 (v01 HP pmab 0000000 1 INTL 20090625)
[ 0.000000] ACPI: SSDT 0x00000000F1DE8AC0 0013A4 (v01 INTEL PPM RCM 8000000 1 INTL 20061109)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000040bffefff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x40bffa000-0x40bffefff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000040bffefff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000001000-0x0000000000098fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000f1de3fff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000040bffefff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000040bffefff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x908
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 64 CPUs, 56 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00099000-0x00099fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00099000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf1de4000-0xf1dedfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf1dee000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfee0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee10000-0xff7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.000000] e820: [mem 0xf8000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffff ffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:64 nr_no de_ids:1
[ 0.000000] PERCPU: Embeddpages/cpu @ffff8803fa200000 s97688 r8192 d29288 u26 2144
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pag es: 4119142
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/ROOT/pve-1@/boot/vmlinuz-4.2.2-1 -pve root=ZFS=/ROOT/pve-1 ro boot=zfs root=ZFS=rpool/ROOT/pve-1 boot=zfs console =tty0 console=ttyS0,115200
[ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 258048 bytes
[ 0.000000] log_buf_len min size: 262144 bytes
[ 0.000000] log_buf_len: 524288 bytes
[ 0.000000] early log buf free: 250424(95%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 16361064K/16741868K available (8019K kernel code, 1326K r wdata, 3808K rodata, 1472K init, 1300K bss, 380804K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=64, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=64.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=64
[ 0.000000] NR_IRQS:16640 nr_irqs:936 16
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-63.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_i dle_ns: 133484882848 ns
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3292.531 MHz processor
[ 0.000028] Calibrating delay loop (skipped), value calculated using timer fr equency.. 6585.06 BogoMIPS (lpj=13170124)
[ 0.003397] pid_max: default: 65536 minimum: 512
[ 0.004839] ACPI: Core revision 20150619
[ 0.007449] ACPI: All ACPI Tables successfully acquired
[ 0.009278] Security Framework initialized
[ 0.010645] AppArmor: AppArmor initialized
[ 0.011949] Yama: becoming mindful.
[ 0.013879] Dentry cache hash table entries: 2097152 (order: 12, 16777216 byt es)
[ 0.019328] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes )
[ 0.022883] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.025055] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 byte s)
[ 0.027642] Initializing cgroup subsys blkio
[ 0.029114] Initializing cgroup subsys memory
[ 0.030497] Initializing cgroup subsys devices
[ 0.031913] Initializing cgroup subsys freezer
[ 0.033333] Initializing cgroup subsys net_cls
[ 0.034768] Initializing cgroup subsys perf_event
[ 0.036356] Initializing cgroup subsys net_prio
[ 0.037773] Initializing cgroup subsys hugetlb
[ 0.039215] CPU: Physical Processor ID: 0
[ 0.040490] CPU: Processor Core ID: 0
[ 0.041681] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.043557] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.046099] mce: CPU supports 9 MCE banks
[ 0.047418] CPU0: Thermal monitoring enabled (TM1)
[ 0.048921] process: using mwait in idle threads
[ 0.050367] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.052773] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.054850] Freeing SMP alternatives memory: 28K (ffffffff81ebd000 - ffffffff 81ec4000)
[ 0.058971] ftrace: allocating 31322 entries in 123 pages
[ 0.074993] DMAR: Host address width 39
[ 0.076617] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.078295] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ec ap f010da
[ 0.080729] DMAR: RMRR base: 0x000000f1ffd000 end: 0x000000f1ffffff
[ 0.082673] DMAR: RMRR base: 0x000000f1ff6000 end: 0x000000f1ffcfff
[ 0.084610] DMAR: RMRR base: 0x000000f1f93000 end: 0x000000f1f94fff
[ 0.086681] DMAR: RMRR base: 0x000000f1f8f000 end: 0x000000f1f92fff
[ 0.088631] DMAR: RMRR base: 0x000000f1f7f000 end: 0x000000f1f8efff
[ 0.090575] DMAR: RMRR base: 0x000000f1f7e000 end: 0x000000f1f7efff
[ 0.092608] DMAR: RMRR base: 0x000000000f4000 end: 0x000000000f4fff
[ 0.094545] DMAR: RMRR base: 0x000000000e8000 end: 0x000000000e8fff
[ 0.096562] DMAR: RMRR base: 0x000000f1dee000 end: 0x000000f1deefff
[ 0.098487] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed90000 IOMMU 0
[ 0.100481] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[ 0.102211] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.104335] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS set ting.
[ 0.107017] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.108863] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.110668] Switched APIC routing to physical flat.
[ 0.112643] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.154559] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1230 V2 @ 3.30GHz (fam: 06 , model: 3a, stepping: 09)
[ 0.157963] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, fu ll-width counters, Broken BIOS detected, complain to your hardware vendor.
[ 0.162548] [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)
[ 0.164914] Intel PMU driver.
[ 0.165913] ... version: 3
[ 0.167222] ... bit width: 48
[ 0.168533] ... generic registers: 4
[ 0.169799] ... value mask: 0000ffffffffffff
[ 0.171465] ... max period: 0000ffffffffffff
[ 0.173224] ... fixed-purpose events: 3
[ 0.174496] ... event mask: 000000070000000f
[ 0.176960] x86: Booting SMP configuration:
[ 0.178304] .... node #0, CPUs: #1
[ 0.183530] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PM U counter.
[ 0.186932] #2 #3 #4 #5 #6 #7
[ 0.209733] x86: Booted up 1 node, 8 CPUs
[ 0.211216] smpboot: Total of 8 processors activated (52680.49 BogoMIPS)
[ 0.219625] devtmpfs: initialized
[ 0.223359] evm: security.selinux
[ 0.224699] evm: security.SMACK64
[ 0.225804] evm: security.SMACK64EXEC
[ 0.226997] evm: security.SMACK64TRANSMUTE
[ 0.228332] evm: security.SMACK64MMAP
[ 0.229508] evm: security.ima
[ 0.230485] evm: security.capability
[ 0.231739] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 7645041785100000 ns
[ 0.234821] pinctrl core: initialized pinctrl subsystem
[ 0.236655] RTC time: 12:05:31, date: 12/14/15
[ 0.238144] NET: Registered protocol family 16
[ 0.247397] cpuidle: using governor ladder
[ 0.251398] cpuidle: using governor menu
[ 0.253062] ACPI FADT declares the system doesn't support PCIe ASPM, so disab le it
[ 0.255461] ACPI: bus type PCI registered
[ 0.256740] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.259109] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7 ffffff](base 0xf4000000)
[ 0.261929] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[ 0.264007] PCI: Using configuration type 1 for base access
[ 0.266046] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, H T is on
[ 0.275746] ACPI: Added _OSI(Module Device)
[ 0.277345] ACPI: Added _OSI(Processor Device)
[ 0.278757] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.280248] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.283214] ACPI: Interpreter enabled
[ 0.284983] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State S1
[ 0.288217] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State S2
[ 0.291215] ACPI Exception: AE_NOT_FOUile evaluating Sleep State [S3](201 50619/hwxface-580)
[ 0.494255] ACPI: (supports S0 S4 S5)
[ 0.495464] ACPI: Using IOAPIC for interrupt routing
[ 0.497036] HEST: Table parsing has been initialized.
[ 0.498634] PCI: Using host bridge windows from ACPI; if necessary, use "pci= nocrs" and report a bug
[ 0.502745] ACPI: PCI Root Bridge [PCI0](domain 0000 [bus 00-14])
[ 0.504662] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM S egments MSI]
[ 0.507355] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER PCIeCapability]
[ 0.510197] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.513001] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapa bility]
[ 0.515400] acpi PNP0A08:00: _OSC: platform willing to grant []
[ 0.517235] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.519219] acpi PNP0A08:00: host bridge window expanded to [mem 0xfed00000-0 xfed44fff window]; [mem 0xfed00000-0xfed44fff window] ignored
[ 0.523251] PCI host bridge to bus 0000:00
[ 0.524580] pci_bus 0000:00: root bus resource [bus 00-14]
[ 0.526500] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff win dow]
[ 0.528807] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]
[ 0.531454] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.533549] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.535679] pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window]
[ 0.537783] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed44fff win dow]
[ 0.540084] pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb window]
[ 0.542287] pci_bus 0000:00: root bus resource [io 0x03c0-0x03df window]
[ 0.544388] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff win dow]
[ 0.548161] pci 0000:07:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0003ffff 64 bit](contains BAR0 for 16 VFs)
[ 0.551624] pci 0000:07:00.0: VF(n) BAR2 space: [mem 0x00000000-0x003fffff 64 bit](contains BAR2 for 16 VFs)
[ 0.559636] pci 0000:00:01.0: PCI bridge to [bus 07]
[ 0.561277] pci 0000:00:06.0: PCI bridge to [bus 02]
[ 0.562883] pci 0000:00:1c.0: PCI bridge to [bus 0d]
[ 0.572479] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.580480] pci 0000:00:1c.6: PCI bridge to [bus 04]
[ 0.588484] pci 0000:00:1c.7: PCI bridge to [bus 01]
[ 0.590276] pci 0000:00:1e.0: PCI bridge to [bus 14](subtractive decode)
[ 0.592583] ACPI: PCI Interrupt Link [LNKA](IRQs 5 7 10 *11)
[ 0.594944] ACPI: PCI Interrupt Link [LNKB](IRQs 5 *7 10 11)
[ 0.597830] ACPI: PCI Interrupt Link [LNKC](IRQs 5 7 10 *11)
[ 0.600206] ACPI: PCI Interrupt Link [LNKD](IRQs 5 7 *10 11)
[ 0.602804] ACPI: PCI Interrupt Link [LNKE](IRQs *5 7 10 11)
[ 0.605225] ACPI: PCI Interrupt Link [LNKF](IRQs 5 7 10 11) *3
[ 0.608533] ACPI: PCI Interrupt Link [LNKG](IRQs 5 7 10 11) *0, disabled.
[ 0.611362] ACPI: PCI Interrupt Link [LNKH](IRQs 5 7 10 11) *0, disabled.
[ 0.614663] vgaarb: setting as boot device: PCI:0000:01:00.1
[ 0.616536] vgaarb: device added: PCI:0000:01:00.1,decodes=io+mem,owns=io+mem ,locks=none
[ 0.619016] vgaarb: loaded
[ 0.619909] vgaarb: bridge control possible 0000:01:00.1
[ 0.621822] SCSI subsystem initialized
[ 0.623463] ACPI: bus type USB registered
[ 0.624783] usbcore: registered new interface driver usbfs
[ 0.626741] usbcore: registered new interface driver hub
[ 0.628456] usbcore: registered new device driver usb
[ 0.630146] PCI: Using ACPI for IRQ routing
[ 0.633128] NetLabel: Initializing
[ 0.634612] NetLabel: domain hash size = 128
[ 0.636042] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.637757] NetLabel: unlabeled traffic allowed by default
[ 0.639562] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.642600] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.646452] clocksource: Switched to clocksource hpet
[ 0.652403] AppArmor: AppArmor Filesystem Enabled
[ 0.654363] pnp: PnP ACPI init
[ 0.655539] system 00:00: [io 0x0408-0x040f] has been reserved
[ 0.657413] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.659576] system 00:00: [io 0x0310-0x0313] has been reserved
[ 0.661630] system 00:00: [io 0x0316-0x0317] has been reserved
[ 0.663490] system 00:00: [io 0x0700-0x071f] has been reserved
[ 0.665344] system 00:00: [io 0x0880-0x08ff] has been reserved
[ 0.667193] system 00:00: [io 0x0900-0x097f] has been reserved
[ 0.669000] system 00:00: [io 0x0cd4-0x0cd7] has been reserved
[ 0.670951] system 00:00: [io 0x0cd0-0x0cd3] has been reserved
[ 0.672791] system 00:00: [io 0x0f50-0x0f58] has been reserved
[ 0.674612] system 00:00: [io 0x0ca0-0x0ca1] has been reserved
[ 0.676537] system 00:00: [io 0x0ca4-0x0ca5] has been reserved
[ 0.678718] system 00:00: [io 0x03f8-0x03ff] has been reserved
[ 0.680640] system 00:00: [mem 0xf4000000-0xf7ffffff] has been reserved
[ 0.680] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[ 0.784752] system 00:00: [mem 0xfed90000-0xfed91fff] could not be reserved
[ 0.787142] pnp: PnP ACPI: found 5 devices
[ 0.794102] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_id le_ns: 2085701024 ns
[ 0.796988] pci 0000:00:1c.4: BAR 14: assigned [mem 0xf8000000-0xf80fffff]
[ 0.799260] pci 0000:07:00.0: BAR 6: assigned [mem 0xfbf00000-0xfbf7ffff pref ]
[ 0.801475] pci 0000:07:00.0: BAR 9: no space for [mem size 0x00400000 64bit]
[ 0.803642] pci 0000:07:00.0: BAR 9: failed to assign [mem size 0x00400000 64 bit]
[ 0.805963] pci 0000:07:00.0: BAR 7: no space for [mem size 0x00040000 64bit]
[ 0.808181] pci 0000:07:00.0: BAR 7: failed to assign [mem size 0x00040000 64 bit]
[ 0.810467] pci 0000:00:01.0: PCI bridge to [bus 07]
[ 0.812020] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.817928] pci 0000:00:01.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.820067] pci 0000:00:06.0: PCI bridge to [bus 02]
[ 0.821625] pci 0000:00:1c.0: PCI bge to [bus 0d]
[ 0.923267] pci 0000:03:00.0: BAR 6: assigned [mem 0xf8000000-0xf801ffff pref ]
[ 0.925537] pci 0000:03:00.1: BAR 6: assigned [mem 0xf8020000-0xf803ffff pref ]
[ 0.927884] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.929475] pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf80fffff]
[ 0.931560] pci 0000:00:1c.4: bridge window [mem 0xfab00000-0xfabfffff 64bi t pref]
[ 0.933921] pci 0000:00:1c.6: PCI bridge to [bus 04]
[ 0.935531] pci 0000:00:1c.6: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.937624] pci 0000:01:00.2: BAR 6: assigned [mem 0xfad00000-0xfad0ffff pref ]
[ 0.939822] pci 0000:00:1c.7: PCI bridge to [bus 01]
[ 0.941392] pci 0000:00:1c.7: bridge window [io 0x3000-0x3fff]
[ 0.943383] pci 0000:00:1c.7: bridge window [mem 0xfad00000-0xfbdfffff]
[ 0.945495] pci 0000:00:1c.7: bridge window [mem 0xf9000000-0xf9ffffff 64bi t pref]
[ 0.947870] pci 0000:00:1e.0: PCI bridge to [bus 14]
[ 0.949467] pci 0000:00:01.0: PCI bridge to [bus 07]
[ 0.951265] pci 0000:00:01.0: BAR 14: assigned [mem 0xf8100000-0xf86fffff]
[ 0.953382] pci 0000:07:00.0: BAR 6: assigned [mem 0xf8100000-0xf817ffff pref ]
[ 0.955638] pci 0000:07:00.0: BAR 3: assigned [mem 0xf8180000-0xf81bffff 64bi t]
[ 0.957991] pci 0000:07:00.0: BAR 9: assigned [mem 0xf81c0000-0xf85bffff 64bi t]
[ 0.960267] pci 0000:07:00.0: BAR 1: assigned [mem 0xf85c0000-0xf85c3fff 64bi t]
[ 0.963245] pci 0000:07:00.0: BAR 7: assigned [mem 0xf85c4000-0xf8603fff 64bi t]
[ 0.965547] pci 0000:00:01.0: PCI bridge to [bus 07]
[ 0.967140] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.969007] pci 0000:00:01.0: bridge window [mem 0xf8100000-0xf86fffff]
[ 0.971082] pci 0000:00:06.0: PCI bridge to [bus 02]
[ 0.972605] pci 0000:00:1c.0: PCI bridge to [bus 0d]
[ 0.974295] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.975872] pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf80fffff]
[ 0.977968] pci 0000:00:1c.4: bridge window [mem 0xfab0000xfabfffff 64bit p ref]
[ 1.080428] pci 0000:00:1c.6: PCI bridge to [bus 04]
[ 1.082002] pci 0000:00:1c.6: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.084105] pci 0000:00:1c.7: PCI bridge to [bus 01]
[ 1.085657] pci 0000:00:1c.7: bridge window [io 0x3000-0x3fff]
[ 1.087694] pci 0000:00:1c.7: bridge window [mem 0xfad00000-0xfbdfffff]
[ 1.089759] pci 0000:00:1c.7: bridge window [mem 0xf9000000-0xf9ffffff 64bi t pref]
[ 1.092117] pci 0000:00:1e.0: PCI bridge to [bus 14]
[ 1.093721] NET: Registered protocol family 2
[ 1.095281] TCP established hash table entries: 131072 (order: 8, 1048576 byt es)
[ 1.097719] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.100154] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.102405] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.104660] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.106877] NET: Registered protocol family 1
[ 1.138785] Trying to unpack rootfs image as initramfs...
[ 1.400150] Freeing initrd memory: 24736K (ffff880034fa0000 - ffff8800367c800 0)
[ 1.402591] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.404675] software IO TLB mem 0xedde4000-0xf1de4000 mapped at [fff f8800edde4000-ffff8800f1de3fff]
[ 1.407842] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163 840 ms ovfl timer
[ 1.410574] hw unit of domain pp0-core 2^-16 Joules
[ 1.412097] hw unit of domain package 2^-16 Joules
[ 1.413607] hw unit of domain pp1-gpu 2^-16 Joules
[ 1.415154] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x1c
[ 1.416954] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x1c
[ 1.418767] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x1c
[ 1.420599] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x1c
[ 1.422415] microcode: CPU4 sig=0x306a9, pf=0x2, revision=0x1c
[ 1.424226] microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x1c
[ 1.426038] microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x1c
[ 1.427828] microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x1c
[ 1.429691] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet. co.uk>, Peter Oruba
[ 1.432478] Scanning for low memory corruption every 60 seconds
[ 1.434983] futex hash table entries: 16384 (order: 8, 1048576 bytes)
[ 1.437469] Initialise system trusted keyring
[ 1.438917] audit: initializing netlink subsys (disabled)
[ 1.440635] audit: type=2000 audit(1450094731.424:1): initialized
[ 1.443094] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.445976] zpool: loaded
[ 1.446953] zbud: loaded
[ 1.448021] VFS: Disk quotas dquot_6.6.0
[ 1.449342] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.452410] fuse init (API version 7.23)
[ 1.453798] Key type big_key registered
[ 1.455556] Key type asymmetric registered
[ 1.457357] Asymmetric key parser 'x509' registered
[ 1.458936] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 49)
[ 1.461293] io scheduler noop registered
[ 1.462867] io scheduler deadline registered (default)
[ 1.464509] io scheduler cfq registered
[ 1.466219] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.467982] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.470249] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/inp ut0
[ 1.472871] ACPI: Power Button [PWRF]
[ 14448] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.576825] ACPI: Thermal Zone [THM0](8 C)
[ 1.578220] ERST: Error Record Serialization Table (ERST) support is initiali zed.
[ 1.580541] pstore: Registered erst as persistent store backend
[ 1.582411] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _O SC.
[ 1.584812] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.607281] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.611403] Linux agpgart interface v0.103
[ 1.614879] brd: module loaded
[ 1.616842] loop: module loaded
[ 1.618279] libphy: Fixed MDIO Bus: probed
[ 1.620091] tun: Universal TUN/TAP device driver, 1.6
[ 1.621684] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com
[ 1.623671] PPP generic driver version 2.4.2
[ 1.625163] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.627187] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus numbe r 1
[ 1.634813] xhci_hcd 0000:04:00.0: hcc params 0x014051cf hci version 0x100 qu irks 0x00000010
[ 1.637890] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.639991] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 1.642254] usb usb1: Product: xHCI Host Controller
[ 1.644344] usb usb1: Manufacturer: Linux 4.2.2-1-pve xhci-hcd
[ 1.646295] usb usb1: SerialNumber: 0000:04:00.0
[ 1.647870] hub 1-0:1.0: USB hub found
[ 1.649462] hub 1-0:1.0: 2 ports detected
[ 1.650821] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.652486] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus numbe r 2
[ 1.654802] usb usb2: We don't know the algorithms for LPM for this host, dis abling LPM.
[ 1.657432] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.659897] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 1.662273] usb usb2: Product: xHCI Host Controller
[ 1.663809] usb usb2: Manufacturer: Linux 4.2.2-1-pve xhci-hcd
[ 1.665656] usb usb2: SerialNumber: 0000:04:00.0
[ 1.667233] hub 2-0:1.0: USB hub found
[ 1.668456] hub 2-0:1.0: 2 ports detected
[ 1.669777] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.671780] ehci-pci: EHCI PCI platform driver
[ 1.673624] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.675327] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus numbe r 3
[ 1.677611] ehci-pci 0000:00:1a.0: debug port 2
[ 1.682946] ehci-pci 0000:00:1a.0: irq 21, io mem 0xfacf0000
[ 1.694438] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.696511] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.698618] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 1.701274] usb usb3: Product: EHCI Host Controller
[ 1.702877] usb usb3: Manufacturer: Linux 4.2.2-1-pve ehci_hcd
[ 1.704839] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.706528] hub 3-0:1.0: USB hub found
[ 1.707750] hub 3-0:1.0: 2 ports detected
[ 1.709120] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.710743] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus numbe r 4
[ 1.713022] ehci-pci 0000:00:1d.0: debug port 2
[ 1.718376] ehci-pci 0000:00:1d.0: irq 20, io mem 0xface0000
[ 1.730435] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.732676] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.734783] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 1.737138] usb usb4: Product: EHCI Host Controller
[ 1.738660] usb usb4: Manufacturer: Linux 4.2.2-1-pve ehci_hcd
[ 1.740476] usb usb4: SerialNumber: 0000:00:1d.0
[ 1.742064] hub 4-0:1.0: USB hub found
[ 1.743341] hub 4-0:1.0: 2 ports detected
[ 1.744670] ehci-platform: EHCI generic platform driver
[ 1.746429] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.748356] ohci-pci: OHCI PCI platform driver
[ 1.749784] ohci-platform: OHCI generic platform driver
[ 1.755385] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.757672] uhci_hcd 0000:01:00.4: UHCI Host Controller
[ 1.759338] uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus numbe r 5
[ 1.761634] uhci_hcd 0000:01:00.4: detected 8 ports
[ 1.763185] uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports
[ 1.765417] uhci_hcd 0000:01:00.4: irq 16, io base 0x00003c00
[ 1.767397] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.769775] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 1.772439] usb usb5: Product: UHCI Host Controller
[ 1.774120] usb usb5: Manufacturer: Linux 4.2.2-1-pve uhci_hcd
[ 1.776071] usb usb5: SerialNumber: 0000:01:00.4
[ 1.777784] hub 5-0:1.0: USB hub found
[ 1.779143] hub 5-0:1.0: 2 ports detected
[ 1.780560] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x 64 irq 1,12
[ 1.785048] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.787030] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.788896] mousedev: PS/2 mouse device common for all mice
[ 1.791085] rtc_cmos 00:02: RTC can wake from S4
[ 1.792826] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.794884] rtc_cmos 00:02: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.797370] i2c /dev entries driver
[ 1.799039] device-mapper: uevent: version 1.0.3
[ 1.800937] device-mapper: ioctl: 4.33.octl (2015-8-18) initialised: dm-devel @redhat.com
[ 1.903855] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.906244] PCCT header not found.
[ 1.907705] NET: Registered protocol family 10
[ 1.909444] NET: Registered protocol family 17
[ 1.911105] bridge: automatic filtering via arp/ip/ip6tables has been depreca ted. Update your scripts to load br_netfilter if you need this.
[ 1.916418] Bridge firewalling registered
[ 1.917868] Key type dns_resolver registered
[ 1.919847] Loading compiled-in X.509 certificates
[ 1.921691] registered taskstats version 1
[ 1.923070] zswap: loading zswap
[ 1.924197] zswap: using zbud pool
[ 1.925409] zswap: using lzo compressor
[ 1.927691] Key type trusted registered
[ 1.930524] Key type encrypted registered
[ 1.931970] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.933834] ima: No TPM chip found, activating TPM-bypass!
[ 1.935696] evm: HMAC attrs: 0x1
[ 1.937167] Magic number: 11:872:76
[ 1.938603] rtc_cmos 00:02: setting system clock to 2015-12-14 12:05:33 UTC ( 1450094733)
[ 1.944164] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.946511] EDD information not available.
[ 1.948428] Freeing unused kernel memory: 1472K (ffffffff81d4d000 - ffffffff8 1ebd000)
[ 1.989601] Write protecting the kernel read-only data: 12288k
[ 2.021336] Freeing unused kernel memory: 160K (ffff8800017d8000 - ffff880001 800000)
[ 2.060551] Freeing unused kernel memory: 288K (ffff880001bb8000 - ffff880001 c00000)
Loading, please wait...
[ 2.106714] systemd-udevd[148]: starting version 215
[ 2.114429] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 2.130432] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 2.130440] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[ 2.143205] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 2.246796] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.246797] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.246945] hub 4-1:1.0: USB hub found
[ 2.247044] hub 4-1:1.0: 6 ports detected
[ 2.262798] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.262799] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.262946] hub 3-1:1.0: USB hub found
[ 2.263046] hub 3-1:1.0: 6 ports detected
[ 2.276188] usb 5-1: New USB device found, idVendor=03f0, idProduct=7029
[ 2.276189] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.276190] usb 5-1: Product: Virtual Keyboard
[ 2.276190] usb 5-1: Manufacturer: BMC
[ 2.406416] tsc: Refined TSC clocksource calibration: 3292.520 MHz
[ 2.406418] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f75b1ea c7a, max_idle_ns: 440795210882 ns
[ 2.518423] usb 4-1.3: new high-speed USB device number 3 using ehci-pci
[ 2.614786] usb 4-1.3: New USB device found, idVendor=0424, idProduct=2660
[ 2.614787] usb 4-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber =0
[ 2.614936] hub 4-1.3:1.0: USB hub found
[ 2.615033] hub 4-1.3:1.0: 2 ports detected
[ 2.844378] random: systemd-udevd urandom read with 4 bits of entropy availab le
[ 2.887341] pps_core: LinuxPPS API ver. 1 registered
[ 2.914047] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti giometti@linux.it
[ 2.960050] mpt2sas version 20.100.00.00 loaded
[ 2.983366] PTP clock support registered
[ 2.983664] mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (163 87748 kB)
[ 3.045383] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.074189] tg3.c:v3.137 (May 11, 2014)
[ 3.074287] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 3.074366] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f im pl SATA mode
[ 3.074368] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems apst
[ 3.078069] usbcore: registered new interface driver usbhid
[ 3.078069] usbhid: USB HID core driver
[ 3.111018] scsi host1: ahci
[ 3.111162] scsi host2: ahci
[ 3.111282] scsi host3: ahci
[ 3.111397] scsi host4: ahci
[ 3.111511] scsi host5: ahci
[ 3.111628] scsi host6: ahci
[ 3.111657] ata1: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0100 irq 35
[ 3.111658] ata2: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0180 irq 35
[ 3.111661] ata3: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0200 irq 35
[ 3.111662] ata4: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0280 irq 35
[ 3.111665] ata5: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0300 irq 35
[ 3.111667] ata6: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0380 irq 35
[ 3.118434] mpt2sas0: MSI-X vectors supported: 1, no of cores: 8, max_msix_ve ctors: 8
[ 3.118474] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 36
[ 3.118475] mpt2sas0: iomem(0x00000000f85c0000), mapped(0xffffc90001c60000), size(16384)
[ 3.118476] mpt2sas0: ioport(0x0000000000004000), size(256)
[ 3.286411] mpt2sas0: sending message unit reset !!
[ 3.294411] mpt2sas0: message unit reset: SUCCESS
[ 3.328902] usbcore: registered new interface driver usbkbd
[ 3.328925] usbcore: registered new interface driver usbmouse
[ 3.426250] mpt2sas0: Allocated physical memory: size(8056 kB)
[ 3.426252] mpt2sas0: Current Controller Queue Depth(3579), Max Controller Qu eue Depth(3712)
[ 3.426252] mpt2sas0: Scatter Gather Elements per IO(128)
[ 3.922128] clocksource: Switched to clocksource tsc
[ 3.922273] input: BMC Virtual Keyboard as /devices/pci0000:00/0000:00:1c.7/ 0000:01:00.4/usb5/5-1/5-1:1.0/0003:03F0:7029.0001/input/input3
[ 3.974509] hid-generic 0003:03F0:7029.0001: input,hidraw0: USB HID v1.01 Key board [BMC Virtual Keyboard ] on usb-0000:01:00.4-1/input0
[ 3.974584] input: BMC Virtual Keyboard as /devices/pci0000:00/0000:00:1c.7/ 0000:01:00.4/usb5/5-1/5-1:1.1/0003:03F0:7029.0002/input/input4
[ 3.974723] hid-generic 0003:03F0:7029.0002: input,hidraw1: USB HID v1.01 Mou se [BMC Virtual Keyboard ] on usb-0000:01:00.4-1/input1
[ 4.078406] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.078965] ata1.00: ATA-9: WDC WD30EZRX-00D8PB0, 80.00A80, max UDMA/133
[ 4.078966] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 4.079574] ata1.00: configured for UDMA/133
[ 4.079719] scsi 1:0:0:0: Direct-Access ATA WDC WD30EZRX-00D 0A80 PQ : 0 ANSI: 5
[ 4.079872] sd 1:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2. 72 TiB)
[ 4.079874] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 4.079898] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 4.079899] sd 1:0:0:0: [sda] Write Protect is off
[ 4.079908] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doe sn't support DPO or FUA
[ 4.118856] mpt2sas0: LSISAS2008: FWVersion(11.00.00.00), ChipRevision(0x03), BiosVersion(07.21.00.00)
[ 4.118858] mpt2sas0: Protocol=(Initiator,Target), Capabilities=(TLR,EEDP,Sna pshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
[ 4.118904] scsi host0: Fusion MPT SAS Host
[ 4.119030] mpt2sas0: sending port enable !!
[ 4.120949] mpt2sas0: host_add: handle(0x0001), sas_addr(0x500605b0056f22d0), phys(8)
[ 4.134368] mpt2sas0: port enable: SUCCESS
[ 4.159498] sda: sda1 sda2 sda9
[ 4.159688] sd 1:0:0:0: [sda] Attached SCSI disk
[ 4.570376] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.570937] ata2.00: ATA-9: WDC WD30EZRX-00D8PB0, 80.00A80, max UDMA/133
[ 4.570937] ata2.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 4.571540] ata2.00: configured for UDMA/133
[ 4.571677] scsi 2:0:0:0: Direct-Access ATA WDC WD30EZRX-00D 0A80 PQ : 0 ANSI: 5
[ 4.571885] sd 2:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2. 72 TiB)
[ 4.571886] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[ 4.571904] sd 2:0:0:0: [sdb] Write Protect is off
[ 4.571925] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doe sn't support DPO or FUA
[ 4.571938] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 4.653983] sdb: sdb1 sdb2 sdb9
[ 4.654170] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 5.062365] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.062929] ata3.00: ATA-9: WDC WD30EZRZ-00WN9B0, 80.00A80, max UDMA/133
[ 5.062929] ata3.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 5.063541] ata3.00: configured for UDMA/133
[ 5.063678] scsi 3:0:0:0: Direct-Access ATA WDC WD30EZRZ-00W 0A80 PQ : 0 ANSI: 5
[ 5.063887] sd 3:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2. 72 TiB)
[ 5.063888] sd 3:0:0:0: [sdc] 4096-byte physical blocks
[ 5.063905] sd 3:0:0:0: [sdc] Write Protect is off
[ 5.063928] sd 3:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doe sn't support DPO or FUA
[ 5.063938] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 5.137606] sdc: sdc1 sdc2 sdc9
[ 5.137793] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 5.533819] tg3 0000:03:00.0 eth0: Tigon3 [partno(N/A) rev 5720000](PCI Expr ess) MAC address a0:1d:48:c7:46:4c
[ 5.554341] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.554915] ata4.00: ATA-9: WDC WD30EZRZ-00WN9B0, 80.00A80, max UDMA/133
[ 5.554916] ata4.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 5.555523] ata4.00: configured for UDMA/133
[ 5.555657] scsi 4:0:0:0: Direct-Access ATA WDC WD30EZRZ-00W 0A80 PQ : 0 ANSI: 5
[ 5.555850] sd 4:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2. 72 TiB)
[ 5.555851] sd 4:0:0:0: [sdd] 4096-byte physical blocks
[ 5.555887] sd 4:0:0:0: [sdd] Write Protect is off
[ 5.555895] sd 4:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doe sn't support DPO or FUA
[ 5.555911] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 5.626316] sdd: sdd1 sdd2 sdd9
[ 5.626513] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 5.954872] tg3 0000:03:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T E thernet) (WireSpeed[1], EEE[1])
[ 6.005731] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] T SOcap[1]
[ 6.045619] tg3 0000:03:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[ 6.046339] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.046643] ata5.00: ATA-9: MTFDDAK512MAM-1K1, 0909, max UDMA/100
[ 6.046644] ata5.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), A A
[ 6.047013] ata5.00: configured for UDMA/100
[ 6.047161] scsi 5:0:0:0: Direct-Access ATA MTFDDAK512MAM-1K 0909 PQ : 0 ANSI: 5
[ 6.047397] sd 5:0:0:0: [sde] 1000215216 512-byte logical blocks: (512 GB/476 GiB)
[ 6.047403] sd 5:0:0:0: Attached scsi generic sg4 type 0
[ 6.047436] sd 5:0:0:0: [sde] Write Protect is off
[ 6.047447] sd 5:0:0:0: [sde] Write cache: disabled, read cache: enabled, doe sn't support DPO or FUA
[ 6.048870] sde: sde1 sde2 sde3
[ 6.049043] sd 5:0:0:0: [sde] Attached SCSI disk
[ 6.366319] ata6: SATA link down (SStatus 0 SControl 300)
[ 6.453557] tg3 0000:03:00.1 eth1: Tigon3 [partno(N/A) rev 5720000](PCI Expr ess) MAC address a0:1d:48:c7:46:4d
[ 6.502647] tg3 0000:03:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T E thernet) (WireSpeed[1], EEE[1])
[ 6.535545] random: nonblocking pool is initialized
[ 6.574337] tg3 0000:03:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] T SOcap[1]
[ 6.612094] tg3 0000:03:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
[ 7.281532] usb 2-1: New USB device found, idVendor=174c, idProduct=5106
[ 7.313853] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 7.350237] usb 2-1: Product: AS2105
[ 7.369535] usb 2-1: Manufacturer: ASMedia
[ 7.392132] usb 2-1: SerialNumber: 13010923D734
[ 7.422045] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 7.453812] scsi host7: usb-storage 2-1:1.0
[ 7.476068] usbcore: registered new interface driver usb-storage
[ 7.507827] usbcore: registered new interface driver uas
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/nfs-top ... done.
Begin: Running /scripts/nfs-premount ... done.
Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
[ 7.546199] zavl: module license 'CDDL' taints kernel.
[ 7.573343] Disabling lock debugging due to kernel taint
[ 7.601520] SPL: Loaded module v0.6.5-348_gd7526b2
[ 7.635226] ZFS: Loaded module v0.6.5.2-55_g61d75b3, ZFS pool version 5000, Z FS filesystem version 5
Begin: Importing pool 'rpool' using defaults ... [ 7.816113] SPL: using hosti d 0xa8c02302
[ 8.968313] scsi 7:0:0:0: Direct-Access MTFDDAK5 12MAM-1K1 0909 PQ : 0 ANSI: 5
[ 9.007616] sd 7:0:0:0: Attached scsi generic sg5 type 0
[ 9.007896] sd 7:0:0:0: [sdf] 1000215216 512-byte logical blocks: (512 GB/476 GiB)
[ 9.009049] sd 7:0:0:0: [sdf] Write Protect is off
[ 9.010070] sd 7:0:0:0: [sdf] No Caching mode page found
[ 9.010071] sd 7:0:0:0: [sdf] Assuming drive cache: write through
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/nfs-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[ 12.473894] sdf: sdf1 sdf2 sdf3
[ 12.477981] sd 7:0:0:0: [sdf] Attached SCSI disk
[ 12.513570] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SEL INUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 12.518121] systemd[1]: Detected architecture 'x86-64'.

Welcome to Debian GNU/Linux 8 (jessie)!

[ 12.759006] systemd[1]: Inserted module 'autofs4'
[ 12.771936] systemd[1]: Set hostname to .
[ 13.222483] systemd-sysv-generator[679]: Ignoring creation of an alias umount iscsi.service for itself
[ 13.892003] systemd[1]: Cannot add dependency job for unit display-manager.se rvice, ignoring: Unit display-manager.service failed to load: No such file or di rectory.
[ 13.897372] systemd[1]: Expecting device dev-ttyS0.device...
Expecting device dev-ttyS0.device...
[ 13.906195] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 13.908944] systemd[1]: Started Forward Password Requests to Wall Directory W atch.
[ 13.911464] systemd[1]: Starting Dispatch Password Requests to Console Direct ory Watch.
[ 13.914159] systemd[1]: Started Dispatch Password Requests to Console Directo ry Watch.
[ 13.916929] systemd[1]: Starting Paths.
[ OK ] Reached target Paths.
[ 13.926192] systemd[1]: Reached target Paths.
[ 13.928063] systemd[1]: Starting Encrypted Volumes.
[ OK ] Reached target Encrypted Volumes.
[ 13.938193] systemd[1]: Reached target Encrypted Volumes.
[ 13.940506] systemd[1]: Starting Arbitrary Executable File Formats File Syste m Automount Point.
[ OK ] Set up automount Arbitrary Executable File Formats F...utomount Point.
[ 13.950181] systemd[1]: Set up automount Arbitrary Executable File Formats Fi le System Automount Point.
[ 13.953542] systemd[1]: Expecting device dev-zvol-rpool-swap.device...
Expecting device dev-zvol-rpool-swap.device...
[ 13.962149] systemd[1]: Starting Root Slice.
[ OK ] Created slice Root Slice.
[ 13.970191] systemd[1]: Created slice Root Slice.
[ 13.971745] systemd[1]: Starting User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 13.978190] systemd[1]: Created slice User and Session Slice.
[ 13.980128] systemd[1]: Starting Delayed Shutdown Socket.
[ OK ] Listening on Delayed Shutdown Socket.
[ 13.990194] systemd[1]: Listening on Delayed Shutdown Socket.
[ 13.992342] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ 14.002185] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 14.004471] systemd[1]: Starting Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 14.014162] systemd[1]: Listening on Journal Socket (/dev/log).
[ 14.016450] systemd[1]: Starting LVM2 metadata daemon socket.
[ OK ] Listening on LVM2 metadata daemon socket.
[ 14.026138] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 14.028229] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ OK ] Listening on Device-mapper event daemon FIFOs.
[ 14.038172] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 14.040793] systemd[1]: Starting LVM2 poll daemon socket.
[ OK ] Listening on LVM2 poll daemon socket.
[ 14.050192] systemd[1]: Listening on LVM2 poll daemon socket.
[ 14.052114] systemd[1]: Starting udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 14.062186] systemd[1]: Listening on udev Control Socket.
[ 14.064121] systemd[1]: Starting udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 14.074159] systemd[1]: Listening on udev Kernel Socket.
[ 14.076060] systemd[1]: Starting Journal Socket.
[ OK ] Listening on Journal Socket.
[ 14.082158] systemd[1]: Listening on Journal Socket.
[ 14.083885] systemd[1]: Starting System Slice.
[ OK ] Created slice System Slice.
[ 14.094160] systemd[1]: Created slice System Slice.
[ 14.096170] systemd[1]: Starting system-getty.slice.
[ OK ] Created slice system-getty.slice.
[ 14.106160] systemd[1]: Created slice system-getty.slice.
[ 14.108531] systemd[1]: Starting system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ 14.118160] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 14.120366] systemd[1]: Starting Increase datagram queue length...
Starting Increase datagram queue length...
[ 14.130467] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. u sing dmeventd or progress polling...
Starting Monitoring of LVM2 mirrors, snapshots etc. ...ress polling...
[ 14.143047] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 14.150457] systemd[1]: Starting udev Coldplug all Devices...
Starting udev Coldplug all Devices...
[ 14.158494] systemd[1]: Starting Create list of required static device nodes for the current kernel...
Starting Create list of required static device nodes...rrent kernel...
[ 14.170874] systemd[1]: Started Set Up Additional Binary Formats.
[ 14.172948] systemd[1]: Mounting Huge Pages File System...
Mounting Huge Pages File System...
[ 14.182441] systemd[1]: Mounting Debug File System...
Mounting Debug File System...
[ 14.190433] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 14.198413] systemd[1]: Starting Slices.
[ OK ] Reached target Slices.
[ 14.206176] systemd[1]: Reached target Slices.
[ OK ] Started Create list of required static device nodes ...current kernel.
[ 14.246235] systemd[1]: Started Create list of required static device nodes f or the current kernel.
[ 14.249648] systemd[1]: Starting Create Static Device Nodes in /dev...
Starting Create Static Device Nodes in /dev...
[ OK ] Started udev Coldplug all Devices.
[ 14.318143] systemd[1]: Started udev Coldplug all Devices.
[ 14.320373] systemd[1]: Starting udev Wait for Complete Device Initialization ...
Starting udev Wait for Complete Device Initialization...
[ OK ] Started Increase datagram queue length.
[ 14.366149] systemd[1]: Started Increase datagram queue length.
[ OK ] Mounted Huge Pages File System.
[ 14.374132] systemd[1]: Mounted Huge Pages File System.
[ OK ] Mounted Debug File System.
[ 14.382131] systemd[1]: Mounted Debug File System.
[ OK ] Mounted POSIX Message Queue File System.
[ 14.390129] systemd[1]: Mounted POSIX Message Queue File System.
[ 14.395164] systemd[1]: Starting Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 14.402141] systemd[1]: Listening on Syslog Socket.
[ 14.403743] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ OK ] Started Journal Service.
[ 14.418138] systemd[1]: Started Journal Service.
[ OK ] Started Load Kernel Modules.
Starting Apply Kernel Variables...
Mounting FUSE Control File System...
[ OK ] Mounted FUSE Control File System.
[ OK ] Started Apply Kernel Variables.
Starting LVM2 metadata daemon...
[ OK ] Started LVM2 metadata daemon.
[ OK ] Started Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager...
[ 14.629119] systemd-udevd[713]: starting version 215
[ OK ] Started udev Kernel Device Manager.
Starting LSB: Set preliminary keymap...
Starting LSB: Tune IDE hard disks...
[ OK ] Started LSB: Tune IDE hard disks.
[ OK ] Found device /dev/ttyS0.
[ 14.901292] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 14.927803] power_meter ACPI000D:00: Found ACPI power meter.
[ 14.929782] power_meter ACPI000D:00: Ignoring unsafe software power cap!
[ 14.947335] EDAC MC: Ver: 3.0.0
[ 14.949310] EDAC MC0: Giving out device to module ie31200_edac controller IE3 1200: DEV 0000:00:00.0 (POLLED)
[ 14.956330] ipmi message handler version 39.2
[ 14.968735] IPMI System Interface driver.
[ 14.970250] ipmi_si: probing via ACPI
[ 14.975533] ipmi_si 00:01: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
[ 14.978201] ipmi_si: Adding ACPI-specified kcs state machine
[ 14.980266] ipmi_si: probing via SMBIOS
[ 14.981578] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[ 14.983581] ipmi_si: Adding SMBIOS-specified kcs state machine duplicate inte rface
[ 14.986266] ipmi_si: probing via SPMI
[ 14.987554] ipmi_si: SPMI: io 0xca2 regsize 2 spacing 2 irq 0
[ 14.989765] ipmi_si: Adding SPMI-specified kcs state machine duplicate interf ace
[ 14.992283] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0 xca2, slave address 0x0, irq 0
[ 15.021951] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.024589] ACPI Warning: SystemIO range 0x0000000000000928-0x000000000000092 F conflicts with OpRegion 0x0000000000000920-0x000000000000092F (\SGPE) (2015061 9/utaddress-254)
[ 15.030361] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.033866] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ OK ] Found device /dev/zvol/rpool/swap.
[ 15.165159] hpwdt 0000:01:00.0: HP Watchdog Timer Driver: NMI decoding initia lized, allow kernel dump: ON (default = 1/ON)
[ 15.219841] hpwdt 0000:01:00.0: HP Watchdog Timer Driver: 1.3.3, timer margin : 30 seconds (nowayout=0).
[ 15.219870] iTCO_vendor_support: vendor-support=0
Activating swap /dev/zvol/rpool/swap...
[ 15.226205] AVX version of gcm_enc/dec engaged.
[ 15.252023] AES CTR mode by8 optimization enabled
[ 15.260117] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 15.262098] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hard ware/BIOS
[ 15.272759] gpio_ich: GPIO from 436 to 511 on gpio_ich
[ OK ] Started Monitoring of LVM2 mirrors, snapshots etc. u...ogress polling.
[ 15.317397] Error: Driver 'pcspkr' is already registered, aborting...
[ 15.372569] ipmi_si 00:01: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x13)
[ 15.375418] ipmi_si 00:01: IPMI kcs interface initialized
[ 15.386499] Adding 15728636k swap on /dev/zd0. Priority:-1 extents:1 across: 15728636k SSFS
[ OK ] Activated swap /dev/zvol/rpool/swap.
[ 15.398700] IPMI SSIF Interface driver
[ OK ] Reached target Swap.
[ 15.400914] intel_rapl: Found RAPL domain package
[ 15.426479] intel_rapl: Found RAPL domain core
[ OK ] Started LSB: Set preliminary keymap.
Starting Remount Root and Kernel File Systems...
[ OK ] Started Remount Root and Kernel File Systems.
Starting Load/Save Random Seed...
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Started Load/Save Random Seed.
[ OK ] Started udev Wait for Complete Device Initialization.
Starting Import ZFS pools by cache file...
Starting Copy rules generated while the root was ro...
[ OK ] Started Copy rules generated while the root was ro.
[ OK ] Started Import ZFS pools by cache file.
Starting Mount ZFS filesystems...
[FAILED] Failed to start Mount ZFS filesystems.
See 'systemctl status zfs-mount.service' for details.
[DEPEND] Dependency failed for ZFS startup target.
[DEPEND] Dependency failed for ZFS file system shares.
[ OK ] Reached target Local File Systems.
Starting Proxmox VE Login Banner...
Starting Commit Proxmox VE network changes...
Starting Create Volatile Files and Directories...
Starting Proxmox VE firewall logger...
Starting LSB: Raise network interfaces....
[ OK ] Started Create Volatile Files and Directories.
Starting Update UTMP about System Boot/Shutdown...
Starting Network Time Synchronization...
[ OK ] Started Commit Proxmox VE network changes.
[ OK ] Started Network Time Synchronization.
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Reached target System Time Synchronized.
[ 20.329094] Netfilter messages via NETLINK v0.30.
[ 20.364546] device eth0 entered promiscuous mode
[ OK ] Started Proxmox VE firewall logger.
[ 20.494960] IPv6: ADDRCONF(NETDEV_UP): vmbr0: link is not ready
[ OK ] Started Proxmox VE Login Banner.
[ OK ] Started LSB: Raise network interfaces..
[ OK ] Reached target Network.
Starting The Proxmox VE cluster filesystem...
[ OK ] Reached target Network is Online.
Starting LSB: RPC portmapper replacement...
Starting LSB: Starts and stops the iSCSI initiator s...ault targets...
[ 23.212847] Loading iSCSI transport class v2.0-870.
[ OK ] Started LSB: RPC portmapper replacement.
[ OK ] Reached target RPC Port Mapper.
Starting LSB: NFS support files common to client and server...
[ 23.244744] iscsi: registered transport (tcp)
[ 23.358252] iscsi: registered transport (iser)
[ OK ] Started LSB: Starts and stops the iSCSI initiator se...efault targets.
[ OK ] Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems.
Starting Trigger Flushing of Journal to Persistent Storage...
Starting LSB: AppArmor initialization...
Starting LSB: Prepare console...
[ 23.488985] RPC: Registered named UNIX socket transport module.
[ 23.517279] RPC: Registered udp transport module.
[ 23.518904] RPC: Registered tcp transport module.
[ 23.520674] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 23.523812] systemd-journald[703]: Received request to flush runtime journal from PID 1
[ OK [ 23.526767] FS-Cache: Loaded
] Started Trigger Flushing of Journal to Persistent Storage.
[ 23.574106] FS-Cache: Netfs 'nfs' registered for caching
[ 23.672416] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ OK ] Started LSB: Prepare console.
Starting LSB: Set console font and keymap...
[ OK ] Started LSB: Set console font and keymap.
[ 23.850695] tg3 0000:03:00.0 eth0: Link is up at 1000 Mbps, full duplex
[ 23.852917] tg3 0000:03:00.0 eth0: Flow control is on for TX and on for RX
[ 23.855219] tg3 0000:03:00.0 eth0: EEE is disabled
[ 23.855275] vmbr0: port 1(eth0) entered forwarding state
[ 23.855290] vmbr0: port 1(eth0) entered forwarding state
[ 23.855377] IPv6: ADDRCONF(NETDEV_CHANGE): vmbr0: link becomes ready
[ OK ] Started LSB: NFS support files common to client and server.
[ 24.133840] audit: type=1400 audit(1450094755.691:2): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="lxc-container-default" pid=1671 c omm="apparmor_parser"
[ 24.139392] audit: type=1400 audit(1450094755.699:3): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="lxc-container-default-with-mounti ng" pid=1671 comm="apparmor_parser"
[ 24.144944] audit: type=1400 audit(1450094755.703:4): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="lxc-container-default-with-nestin g" pid=1671 comm="apparmor_parser"
[ 24.166895] audit: type=1400 audit(1450094755.727:5): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=1671 comm ="apparmor_parser"
[ OK ] Started LSB: AppArmor initialization.
[ OK ] Reached target System Initialization.
[ OK ] Listening on Proxmox VE watchdog multiplexer socket.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Timers.
[ OK ] Reached target Basic System.
Starting Cgroup management daemon...
[ OK ] Started Cgroup management daemon.
Starting Kernel Samepage Merging (KSM) Tuning Daemon...
Starting ZFS Event Daemon (zed)...
[ OK ] Started ZFS Event Daemon (zed).
Starting Self Monitoring and Reporting Technology (SMART) Daemon...
[ OK ] Started Self Monitoring and Reporting Technology (SMART) Daemon.
Starting FUSE filesystem for LXC...
[ OK ] Started FUSE filesystem for LXC.
Starting OpenBSD Secure Shell server...
[ OK ] Started OpenBSD Secure Shell server.
Starting LXC network bridge setup...
Starting Deferred execution scheduler...
[ OK ] Started Deferred execution scheduler.
Starting Regular background program processing daemon...
[ OK ] Started Regular background program processing daemon.
Starting /etc/rc.local Compatibility...
Starting Login Service...
Starting LSB: Kernel NFS server support...
Starting LSB: Start/stop sysstat's sadc...
Starting LSB: Execute the kexec -e command to reboot system...
Starting LSB: start the RRDtool data caching daemon...
Starting LSB: start Samba daemons for the AD DC...
Starting LSB: start Samba NetBIOS nameserver (nmbd)...
Starting LSB: Postfix Mail Transport Agent...
Starting Proxmox VE watchdog multiplexer...
[ 24.580181] cgroup: new mount options do not match the existing superblock, w ill be ignored
[ OK ] Started Proxmox VE watchdog multiplexer.
Starting D-Bus System Message Bus...
[ OK ] Started D-Bus System Message Bus.
[ 24.903459] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 24.912118] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery d irectory
[ 24.914864] NFSD: starting 90-second grace period (net ffffffff81cfc600)
Starting System Logging Service...
Starting Permit User Sessions...
[ OK ] Started The Proxmox VE cluster filesystem.
[ OK ] Started Kernel Samepage Merging (KSM) Tuning Daemon.
[ OK ] Started LXC network bridge setup.
[ OK ] Started /etc/rc.local Compatibility.
[ OK ] Started LSB: Kernel NFS server support.
[ OK ] Started LSB: Start/stop sysstat's sadc.
[ OK ] Started LSB: Execute the kexec -e command to reboot system.
[ OK ] Started LSB: start the RRDtool data caching daemon.
[ OK ] Started Permit User Sessions.
Starting LSB: Load kernel image with kexec...
Starting Getty on tty1...
[ OK ] Started Getty on tty1.
Starting Serial Getty on ttyS0...
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Reached target Login Prompts.
Starting PVE Status Daemon...
Starting PVE API Daemon...
Starting Proxmox VE firewall...
[ OK ] Started LSB: Load kernel image with kexec.
[ OK ] Started Login Service.
[ OK ] Started System Logging Service.
Starting LXC Container Initialization and Autoboot Code...
[ OK ] Started LXC Container Initialization and Autoboot Code.
[ OK ] Started LSB: Postfix Mail Transport Agent.
[ OK ] Reached target Mail Transport Agent.
[ OK ] Started Proxmox VE firewall.
[ 26.729218] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ OK ] Started PVE Status Daemon.
[ 26.818014] ip_set: protocol 6
[ OK ] Started PVE API Daemon.
Starting PVE API Proxy Server...
Starting PVE Cluster Ressource Manager Daemon...
[ OK ] Started LSB: start Samba daemons for the AD DC.
[ OK ] Started LSB: start Samba NetBIOS nameserver (nmbd).
Starting LSB: start Samba SMB/CIFS daemon (smbd)...
[ OK ] Started PVE Cluster Ressource Manager Daemon.
Starting PVE Local HA Ressource Manager Daemon...
[ OK ] Started LSB: start Samba SMB/CIFS daemon (smbd).
[ OK ] Started PVE API Proxy Server.
Starting PVE SPICE Proxy Server...
Starting PVE VM Manager...
[ OK ] Started PVE Local HA Ressource Manager Daemon.
[ OK ] Started PVE SPICE Proxy Server.
[ OK ] Started PVE VM Manager.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Started Update UTMP about System Runlevel Changes.

Welcome to the Proxmox Virtual Environment. Please use your web browser to
configure this server - connect to:

https://192.168.1.11:8006/

apollo login:

[ 162.052828] device tap100i0 entered promiscuous mode
[ 162.080369] vmbr0: port 2(tap100i0) entered forwarding state
[ 162.107457] vmbr0: port 2(tap100i0) entered forwarding state
[ 166.062649] device tap102i0 entered promiscuous mode
[ 166.090255] vmbr0: port 3(tap102i0) entered forwarding state
[ 166.117794] vmbr0: port 3(tap102i0) entered forwarding state
[ 8050.380431] perf interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 500 00
[ 8490.956225] usb 3-1.1: new high-speed USB device number 3 using ehci-pci
[ 8491.149464] usb 3-1.1: New USB device found, idVendor=1058, idProduct=10b8
[ 8491.182598] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 8491.218462] usb 3-1.1: Product: Elements 10B8
[ 8491.239900] usb 3-1.1: Manufacturer: Western Digital
[ 8491.263315] usb 3-1.1: SerialNumber: 575847314141333139343639
[ 8491.292595] usb-storage 3-1.1:1.0: USB Mass Storage device detected
[ 8491.322888] scsi host8: usb-storage 3-1.1:1.0
[ 8492.344679] scsi 8:0:0:0: Direct-Access WD Elements 10B8 1007 PQ: 0 ANSI: 6
[ 8492.384089] sd 8:0:0:0: Attached scsi generic sg6 type 0
[ 8492.387785] sd 8:0:0:0: [sdg] Spinning up disk...
[ 8493.392133] ......ready
[ 8498.439987] sd 8:0:0:0: [sdg] 3906963456 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 8498.478840] sd 8:0:0:0: [sdg] Write Protect is off
[ 8498.503343] sd 8:0:0:0: [sdg] No Caching mode page found
[ 8498.528883] sd 8:0:0:0: [sdg] Assuming drive cache: write through
[ 8498.615841] sdg: sdg1
[ 8498.630595] sd 8:0:0:0: [sdg] Attached SCSI disk
[ 9011.778288] hfsplus: write access to a journaled filesystem is not supported, use the force option at you r own risk, mounting read-only.

Welcome to the Proxmox Virtual Environment. Please use your web browser to
configure this server - connect to:

https://192.168.1.111:8006/

apollo login:

Welcome to the Proxmox Virtual Environment. Please use your web browser to
configure this server - connect to:

https://192.168.1.111:8006/

apollo login: [ 9500.744813] Kernel panic - not syncing: An NMI occurred. Depending on your system the reaso n for the NMI is logged in any one of the following resources:
[ 9500.744813] 1. Integrated Management Log (IML)
[ 9500.744813] 2. OA Syslog
[ 9500.744813] 3. OA Forward Progress Log
[ 9500.744813] 4. iLO Event Log
[ 9500.877554] CPU: 0 PID: 486 Comm: z_wr_int_7 Tainted: P O 4.2.2-1-pve #1
[ 9500.915211] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 07/16/2015
[ 9500.949574] 000008a41084f25a ffff8803fa205d68 ffffffff817c92f3 ffff8803fa2112f8
[ 9500.985652] ffffffffc05472d8 ffff8803fa205de8 ffffffff817c6da4 0000000000000000
[ 9501.021258] 0000000000000008 ffff8803fa205df8 ffff8803fa205d98 0000000000000000
[ 9501.057138] Call Trace:
[ 9501.069042] [] dump_stack+0x45/0x57
[ 9501.096927] [] panic+0xc1/0x1fe
[ 9501.119976] [] hpwdt_pretimeout+0xc8/0xc8 [hpwdt]
[ 9501.150795] [] ? sched_clock+0x9/0x10
[ 9501.176646] [] nmi_handle+0x79/0x100
[ 9501.201817] [] ? nmi_handle+0x83/0x100
[ 9501.227838] [] io_check_error+0x1e/0x90
[ 9501.254256] [] default_do_nmi+0x86/0x100
[ 9501.280868] [] do_nmi+0xea/0x140
[ 9501.304401] [] end_repeat_nmi+0x1a/0x1e
[ 9501.330748] [] ? page_referenced+0x84/0x120
[ 9501.358696] [] ? page_referenced+0x84/0x120
[ 9501.386655] [] ? page_referenced+0x84/0x120
[ 9501.414219] <> [] ? __page_check_address+0x1a0/0x1a0
[ 9501.448796] [] ? page_get_anon_vma+0x80/0x80
[ 9501.477257] [] shrink_page_list+0x5c0/0x710
[ 9501.505413] [] shrink_inactive_list+0x273/0x520
[ 9501.535396] [] shrink_lruvec+0x5dd/0x7b0
[ 9501.562354] [] shrink_zone+0xdc/0x290
[ 9501.587796] [] do_try_to_free_pages+0x163/0x430
[ 9501.617409] [] try_to_free_pages+0xba/0x130
[ 9501.645406] [] __alloc_pages_nodemask+0x60e/0xa30
[ 9501.676567] [] ? __sg_alloc_table+0x78/0x160
[ 9501.705577] [] alloc_pages_current+0x9a/0x110
[ 9501.734615] [] new_slab+0x366/0x450
[ 9501.759577] [] __slab_alloc+0x3d0/0x4c0
[ 9501.786627] [] ? spl_kmem_cache_alloc+0x69/0x800 [spl]
[ 9501.820682] [] ? scsi_request_fn+0x3f/0x640
[ 9501.849860] [] ? spl_kmem_cache_alloc+0x69/0x800 [spl]
[ 9501.885389] [] kmem_cache_alloc+0x1a7/0x200
[ 9501.914099] [] spl_kmem_cache_alloc+0x69/0x800 [spl]
[ 9501.945625] [] ? generic_make_request+0xcc/0x110
[ 9501.978244] [] ? __slab_free+0x14c/0x290
[ 9502.006295] [] zio_create+0x42/0x470 [zfs]
[ 9502.035283] [] zio_vdev_delegated_io+0x6f/0x80 [zfs]
[ 9502.068338] [] ? vdev_queue_timestamp_compare+0x40/0x40 [zfs]
[ 9502.105047] [] vdev_queue_io_to_issue+0x61d/0x8a0 [zfs]
[ 9502.138805] [] ? vdev_queue_timestamp_compare+0x40/0x40 [zfs]
[ 9502.173454] [] vdev_queue_io_done+0x193/0x250 [zfs]
[ 9502.205728] [] zio_vdev_io_done+0x88/0x180 [zfs]
[ 9502.236441] [] zio_execute+0xde/0x190 [zfs]
[ 9502.264533] [] taskq_thread+0x230/0x420 [spl]
[ 9502.293363] [] ? wake_up_q+0x70/0x70
[ 9502.318618] [] ? taskq_cancel_id+0x110/0x110 [spl]
[ 9502.349695] [] kthread+0xdb/0x100
[ 9502.373579] [] ? kthread_create_on_node+0x1c0/0x1c0
[ 9502.406001] [] ret_from_fork+0x3f/0x70
[ 9502.432028] [] ? kthread_create_on_node+0x1c0/0x1c0
[ 9502.463507] Kernel Offset: disabled
[ 9502.484204] ERST: [Firmware Warn]: Firmware does not respond in time.
[ 9502.520039] ERST: [Firmware Warn]: Firmware does not respond in time.
[ 9502.551205] ---[ end Kernel panic - not syncing: An NMI occurred. Depending on your system the reason for the NMI is logged in any one of the following resources:
[ 9502.551205] 1. Integrated Management Log (IML)
[ 9502.551205] 2. OA Syslog
[ 9502.551205] 3. OA Forward Progress Log
[ 9502.551205] 4. iLO Event Log
[ 9502.690480] ------------[ cut here ]------------
[ 9502.715512] WARNING: CPU: 0 PID: 486 at arch/x86/kernel/smp.c:124 native_smp_send_reschedule+0x60/0x70()
[ 9502.762874] Modules linked in: nls_utf8 hfsplus ip_set ip6table_filter ip6_tables iptable_filter ip_table s x_tables nfsd auth_rpcgss nfs_acl nfs lockd grace fscache sunrpc ib_iser rdma_cm iw_cm ib_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi nfnetlink_log nfnetlink intel_rapl iosf _mbi ipmi_ssif x86_pkg_temp_thermal intel_powerclamp coretemp gpio_ich kvm_intel snd_pcm iTCO_wdt kvm crct10 dif_pclmul crc32_pclmul ghash_clmulni_intel hpilo aesni_intel aes_x86_64 snd_timer lrw iTCO_vendor_support h pwdt gf128mul snd joydev input_leds glue_helper ablk_helper cryptd soundcore lpc_ich shpchp ipmi_si ipmi_msg handler psmouse ie31200_edac edac_core 8250_fintek serio_raw acpi_power_meter pcspkr mac_hid vhost_net vhost macvtap macvlan autofs4 zfs(PO) zunicode(PO) zcommon(PO) znvpair(PO) spl(O) zavl(PO) uas usb_storage hid_ge neric usbmouse usbkbd ahci usbhid tg3 libahci ptp hid pps_core mpt2sas raid_class scsi_transport_sas
[ 9503.204769] CPU: 0 PID: 486 Comm: z_wr_int_7 Tainted: P O 4.2.2-1-pve #1
[ 9503.248200] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 07/16/2015
[ 9503.285577] ffffffff81a92439 ffff8803fa203d88 ffffffff817c92f3 0000000000000007
[ 9503.325563] 0000000000000000 ffff8803fa203dc8 ffffffff8107776a 0000000000000000
[ 9503.364325] 0000000000000001 ffff8803fa256a00 0000000000000000 ffff8800ed849b80
[ 9503.405360] Call Trace:
[ 9503.418229] [] dump_stack+0x45/0x57
[ 9503.451553] [] warn_slowpath_common+0x8a/0xc0
[ 9503.482940] [] warn_slowpath_null+0x1a/0x20
[ 9503.515209] [] native_smp_send_reschedule+0x60/0x70
[ 9503.549871] [] trigger_load_balance+0x13b/0x230
[ 9503.582296] [] scheduler_tick+0xa6/0xd0
[ 9503.611711] [] ? tick_sched_do_timer+0x30/0x30
[ 9503.645166] [] update_process_times+0x51/0x60
[ 9503.677153] [] tick_sched_handle.isra.15+0x25/0x60
[ 9503.711070] [] tick_sched_timer+0x44/0x80
[ 9503.741571] [] __hrtimer_run_queues+0xe4/0x200
[ 9503.774272] [] hrtimer_interrupt+0xa8/0x1a0
[ 9503.803259] [] ? do_flush_tlb_all+0x40/0x40
[ 9503.832607] [] local_apic_timer_interrupt+0x3c/0x70
[ 9503.866396] [] smp_apic_timer_interrupt+0x41/0x60
[ 9503.898991] [] apic_timer_interrupt+0x6b/0x70
[ 9503.928193] [] ? panic+0x1bd/0x1fe
[ 9503.959385] [] ? panic+0x1b6/0x1fe
[ 9503.984463] [] hpwdt_pretimeout+0xc8/0xc8 [hpwdt]
[ 9504.015315] [] ? sched_clock+0x9/0x10
[ 9504.045511] [] nmi_handle+0x79/0x100
[ 9504.074394] [] ? nmi_handle+0x83/0x100
[ 9504.103562] [] io_check_error+0x1e/0x90
[ 9504.132425] [] default_do_nmi+0x86/0x100
[ 9504.161966] [] do_nmi+0xea/0x140
[ 9504.187954] [] end_repeat_nmi+0x1a/0x1e
[ 9504.214527] [] ? page_referenced+0x84/0x120
[ 9504.246282] [] ? page_referenced+0x84/0x120
[ 9504.276464] [] ? page_referenced+0x84/0x120
[ 9504.307623] <> [] ? __page_check_address+0x1a0/0x1a0
[ 9504.344259] [] ? page_get_anon_vma+0x80/0x80
[ 9504.374009] [] shrink_page_list+0x5c0/0x710
[ 9504.406375] [] shrink_inactive_list+0x273/0x520
[ 9504.438788] [] shrink_lruvec+0x5dd/0x7b0
[ 9504.468542] [] shrink_zone+0xdc/0x290
[ 9504.496434] [] do_try_to_free_pages+0x163/0x430
[ 9504.528425] [] try_to_free_pages+0xba/0x130
[ 9504.557808] [] __alloc_pages_nodemask+0x60e/0xa30
[ 9504.589173] [] ? __sg_alloc_table+0x78/0x160
[ 9504.618014] [] alloc_pages_current+0x9a/0x110
[ 9504.646901] [] new_slab+0x366/0x450
[ 9504.671957] [] __slab_alloc+0x3d0/0x4c0
[ 9504.698788] [] ? spl_kmem_cache_alloc+0x69/0x800 [spl]
[ 9504.731536] [] ? scsi_request_fn+0x3f/0x640
[ 9504.760039] [] ? spl_kmem_cache_alloc+0x69/0x800 [spl]
[ 9504.798720] [] kmem_cache_alloc+0x1a7/0x200
[ 9504.827838] [] spl_kmem_cache_alloc+0x69/0x800 [spl]
[ 9504.865036] [] ? generic_make_request+0xcc/0x110
[ 9504.897370] [] ? __slab_free+0x14c/0x290
[ 9504.925321] [] zio_create+0x42/0x470 [zfs]
[ 9504.956180] [] zio_vdev_delegated_io+0x6f/0x80 [zfs]
[ 9504.992215] [] ? vdev_queue_timestamp_compare+0x40/0x40 [zfs]
[ 9505.029963] [] vdev_queue_io_to_issue+0x61d/0x8a0 [zfs]
[ 9505.065161] [] ? vdev_queue_timestamp_compare+0x40/0x40 [zfs]
[ 9505.103297] [] vdev_queue_io_done+0x193/0x250 [zfs]
[ 9505.136628] [] zio_vdev_io_done+0x88/0x180 [zfs]
[ 9505.169031] [] zio_execute+0xde/0x190 [zfs]
[ 9505.200111] [] taskq_thread+0x230/0x420 [spl]
[ 9505.235515] [] ? wake_up_q+0x70/0x70
[ 9505.264688] [] ? taskq_cancel_id+0x110/0x110 [spl]
[ 9505.298158] [] kthread+0xdb/0x100
[ 9505.325375] [] ? kthread_create_on_node+0x1c0/0x1c0
[ 9505.359976] [] ret_from_fork+0x3f/0x70
[ 9505.387250] [] ? kthread_create_on_node+0x1c0/0x1c0
[ 9505.421347] ---[ end trace fa0fa2ed71056d9b ]---
@behlendorf
Copy link
Contributor

Closing as stale.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@behlendorf @laris