-
Notifications
You must be signed in to change notification settings - Fork 0
/
zuluscsi.ini
54 lines (46 loc) · 2.19 KB
/
zuluscsi.ini
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
[SCSI]
# Settings that apply to all SCSI IDs
Debug = 1 # Same effect as DIPSW2, enables verbose log messages
#SelectionDelay = 255 # Millisecond delay after selection, 255 = automatic, 0 = no delay
#Dir = "/" # Optionally look for image files in subdirectory
#Dir2 = "/images" # Multiple directories can be specified Dir1...Dir9
#DisableStatusLED 1 # 0: Use status LED, 1: Disable status LED
# NOTE: PhyMode is only relevant for ZuluSCSI V1.1 at this time.
#PhyMode = 1 # 0: Best available 1: PIO 2: DMA_TIMER 3: GREENPAK_PIO 4: GREENPAK_DMA
# The PhyMode parameter has no effect on ZuluSCSI RP2040-based platforms, as there is only one PHY mode.
# Settings that can be needed for compatibility with some hosts
#Quirks = 0 # 0: Standard, 1: Apple, 2: OMTI, 4: Xebec, 8: VMS, 16: X68000, 32: EWSD
EnableUnitAttention = 1 # Post UNIT_ATTENTION status on power-on or SD card hotplug
#EnableSCSI2 = 1 # Enable faster speeds of SCSI2
#EnableSelLatch = 1 # For Philips P2000C and other devices that release SEL signal before BSY
#EnableParity = 1 # Enable parity checks on platforms that support it (RP2040)
#MapLunsToIDs = 1 # For Philips P2000C simulate multiple LUNs
#MaxSyncSpeed = 5 # Set to 5 or 10 to enable synchronous SCSI mode, 0 to disable
#InitPreDelay = 0 # How many milliseconds to delay before the SCSI interface is initialized
#InitPostDelay = 0 # How many milliseconds to delay after the SCSI interface is initialized
# Settings that can be specified either per-device or for all devices.
# Settings can be overridden for individual devices.
[SCSI0]
Vendor = "DEC"
Product = "RD54"
Version = "1.0"
Serial = "1"
Type = 0 # 0: Fixed, 1: Removable, 2: Optical, 3: Floppy, 4: Mag-optical, 5: Tape, 6: Network
[SCSI1]
Vendor = "DEC"
Product = "RD54"
Version = "1.0"
Serial = "2"
Type = 0 # 0: Fixed, 1: Removable, 2: Optical, 3: Floppy, 4: Mag-optical, 5: Tape, 6: Network
[SCSI2]
Vendor = "DEC"
Product = "RD54"
Version = "1.0"
Serial = "3"
Type = 0 # 0: Fixed, 1: Removable, 2: Optical, 3: Floppy, 4: Mag-optical, 5: Tape, 6: Network
[SCSI3]
Vendor = "DEC"
Product = "RD54"
Version = "1.0"
Serial = "4"
Type = 0 # 0: Fixed, 1: Removable, 2: Optical, 3: Floppy, 4: Mag-optical, 5: Tape, 6: Network