Auto Reconnect

It has been requested, that there should be an automatic reconnect when the connection has been lost. This functionality has been implemented both on the A2DP Source and the A2DP Sink.

I am not convinced that this is a good thing in all the cases, so I suggest that you explicitly specify if you want to have it active or not with the help of the set_auto_reconnect(bool) or the set_try_reconnect_max_count(int) methods. To open a Sink the code would look as follows:

#include "BluetoothA2DPSink.h"

BluetoothA2DPSink a2dp_sink;

void setup() {
  a2dp_sink.set_try_reconnect_max_count(20);
  a2dp_sink.start("MyMusic");  
}

void loop() {
}

The default value for try_reconnect is 10. After the system tried unsuccessfully to reconnect, it will stop to retry and you need to start the connection from your Bluetooth Source (e.g. Mobile Phone) again.

You can deactivate the automatic reconnect with:

#include "BluetoothA2DPSink.h"

BluetoothA2DPSink a2dp_sink;

void setup() {
  a2dp_sink.set_auto_reconnect(false);
  a2dp_sink.start("MyMusic");  
}

void loop() {
}