-
Notifications
You must be signed in to change notification settings - Fork 20
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Flashing LYWSD03MMC with zigbee firmware using Telink Flasher v7.3 gives error: "Size firmware is more 131072 bytes!" #31
Comments
If the firmware file is larger than 128 kilobytes, then you will have to download BLE version 4.6 or later. BLE versions below 4.6 do not support OTA downloads with fw sizes larger than 128 kilobytes. Xiaomi firmwares, excluding MJWSD05MMC, also do not support OTA downloads with fw sizes larger than 128 kilobytes. |
Great will try, thanks! |
Hi i updated the sensor, but it now says:
|
this version unfortunately only allows wired upload of firmware (guess- I didn’t test it). OTA updates don’t work with this one. I think someone needs to find a version that is in the middle or upload BLE version first with TelinkMiFlasher - I’ll test the latter in a minute 😀 |
BLE custom software installed using TelinkMiFlasher does not allow further upload of Zigbee firmware. Maybe this could be a feature of newer version ? |
https://github.com/pvvx/ATC_MiThermometer
The Zigbee version uses the standard Zigbee-OTA option. PS: Zigbee is not supported on typical consumer devices. And today this is an outdated protocol. Requires the use of special adapters, each of which has its own programs and types of protocols that are incompatible with others to bind and force users to purchase devices from one corporation. |
@pvvx I think we don’t understand each other here. Let me explain my case (and maybe @matrover has the same case): Last option is the third one possible via TelinkMiFlasher- some Xiaomi software. Maybe then it will work but the sensor where I uploaded the BLE firmware is “locked” until I either upload firmware with UART or BLE software gets an update that allows OTA flashing of Zigbee firmware. |
You don't need new original firmware from Xiaomi. You need alternative firmware version 4.6, which is provided by TelinkMiFlasher.
The Zigbee version can be flashed via OTA only from the BLE version 4.6. |
Thanks @pvvx for that info. I’ll try today with 4.6. |
FYI: you were right - I haven't seen the option to update to v4.6 and later on to Zigbee but I've tested it yesterday and it works flawlessly! |
Hi,
The title says it all, i've done this flashing a few times but this time it gives me the error: Size firmware is more 131072 bytes!
Any idea?
Thanks!
The text was updated successfully, but these errors were encountered: