diff --git a/Makefile b/Makefile index aa33c40f1ffc..9cc77c55ccae 100644 --- a/Makefile +++ b/Makefile @@ -473,7 +473,7 @@ if [ $$error_occured -gt 0 ]; then echo $$error_occured > $(ERROR_FILE); fi; endef define RUN_TEST +error_occured=0;\ -$($(TEST)_COMMAND))\ +$($(TEST)_COMMAND)\ if [ $$error_occured -gt 0 ]; then echo $$error_occured > $(ERROR_FILE); fi; endef @@ -485,11 +485,11 @@ $(SUBPROJECTS): %: %-allkm # Let's match everything, we handle all the rule parsing ourselves .PHONY: % -ifndef SKIP_GIT %: # Check if we have the CMP tool installed cmp --version >/dev/null 2>&1; if [ $$? -gt 0 ]; then printf "$(MSG_NO_CMP)"; exit 1; fi; # Check if the submodules are dirty, and display a warning if they are +ifndef SKIP_GIT git submodule status --recursive 2>/dev/null | \ while IFS= read -r x; do \ case "$$x" in \ @@ -497,6 +497,7 @@ ifndef SKIP_GIT *) printf "$(MSG_SUBMODULE_DIRTY)";break;; \ esac \ done +endif rm -f $(ERROR_FILE) > /dev/null 2>&1 $(eval $(call PARSE_RULE,$@)) $(eval $(call SET_SILENT_MODE)) @@ -508,22 +509,6 @@ ifndef SKIP_GIT if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi; $(foreach TEST,$(TESTS),$(RUN_TEST)) if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi; -else -%: - # Check if we have the CMP tool installed - cmp --version >/dev/null 2>&1; if [ $$? -gt 0 ]; then printf "$(MSG_NO_CMP)"; exit 1; fi; - rm -f $(ERROR_FILE) > /dev/null 2>&1 - $(eval $(call PARSE_RULE,$@)) - $(eval $(call SET_SILENT_MODE)) - # Run all the commands in the same shell, notice the + at the first line - # it has to be there to allow parallel execution of the submake - # This always tries to compile everything, even if error occurs in the middle - # But we return the error code at the end, to trigger travis failures - $(foreach COMMAND,$(COMMANDS),$(RUN_COMMAND)) - if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi; - $(foreach TEST,$(TESTS),$(RUN_TEST)) - if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi; -endif # All should compile everything .PHONY: all diff --git a/keyboards/amjpad/Makefile b/keyboards/amjpad/Makefile new file mode 100644 index 000000000000..4e2a6f00fd8e --- /dev/null +++ b/keyboards/amjpad/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif \ No newline at end of file diff --git a/keyboards/amjpad/amjpad.c b/keyboards/amjpad/amjpad.c new file mode 100644 index 000000000000..ac5991bd087f --- /dev/null +++ b/keyboards/amjpad/amjpad.c @@ -0,0 +1,30 @@ +#include "amjpad.h" +#include "led.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + led_init_ports(); +}; + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + matrix_scan_user(); +}; + +void led_init_ports(void) { + // * Set our LED pins as output + DDRD |= (1<<6); +} + +void led_set_kb(uint8_t usb_led) { + if (usb_led & (1< + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0003 +#define MANUFACTURER AMJ +#define PRODUCT PAD +#define DESCRIPTION QMK keyboard firmware for AMJ PAD + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 4 + +// ROWS: Top to bottom, COLS: Left to right + +#define MATRIX_ROW_PINS { F7, F6, F5, F4, D5, D0 } +#define MATRIX_COL_PINS { F1, F0, E6, C7 } +#define UNUSED_PINS + +#define BACKLIGHT_PIN B6 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* Backlight configuration + */ +#define BACKLIGHT_LEVELS 4 + +/* Underlight configuration + */ + +#define RGB_DI_PIN E2 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 8 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/amjpad/keymaps/default/keymap.c b/keyboards/amjpad/keymaps/default/keymap.c new file mode 100644 index 000000000000..362afd107924 --- /dev/null +++ b/keyboards/amjpad/keymaps/default/keymap.c @@ -0,0 +1,101 @@ +#include "amjpad.h" + +#ifdef RGBLIGHT_ENABLE +#include "rgblight.h" +#endif + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 + +#define _______ KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,-------------------. + * |Esc |TAB |BS | = | + * |----|----|----|----| + * | NL | / | * | - | + * |----|----|----|----| + * | 7 | 8 | 9 | | + * |----|----|----| + | + * | 4 | 5 | 6 | | + * |----|----|----|----| + * | 1 | 2 | 3 | | + * |----|----|----| En | + * | 0 |./FN| | + * `-------------------' + */ + +[_BL] = KEYMAP( + KC_ESC,KC_TAB,KC_BSPC,KC_PEQL, \ + KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \ + KC_P7, KC_P8, KC_P9, KC_PPLS, \ + KC_P4, KC_P5, KC_P6, \ + KC_P1, KC_P2, KC_P3, KC_PENT, \ + KC_P0, LT(_FL,KC_PDOT)), + + /* Keymap _FL: Function Layer + * ,-------------------. + * |Esc |TAB |BS | = | + * |----|----|----|----| + * | NL | / | * | - | + * |----|----|----|----| + * | 7 | 8 | 9 | | + * |----|----|----|RST | + * | 4 | 5 | 6 | | + * |----|----|----|----| + * | 1 | 2 | 3 | | + * |----|----|----| En | + * | 0 |./FN| | + * `-------------------' + */ +[_FL] = KEYMAP( + + KC_ESC,KC_TAB,KC_BSPC,KC_PEQL, \ + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ + KC_P7, KC_P8, KC_P9, RESET, \ + KC_P4, KC_P5, KC_P6, \ + KC_P1, KC_P2, KC_P3, KC_PENT, \ + KC_P0, LT(_FL,KC_PDOT)), +}; + +enum function_id { + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(SHIFT_ESC), +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/amjpad/rules.mk b/keyboards/amjpad/rules.mk new file mode 100644 index 000000000000..d8ec4236553c --- /dev/null +++ b/keyboards/amjpad/rules.mk @@ -0,0 +1,66 @@ + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/ergodox/ez/Makefile b/keyboards/ergodox/ez/Makefile index 9b6121e2c213..1098332b8abb 100644 --- a/keyboards/ergodox/ez/Makefile +++ b/keyboards/ergodox/ez/Makefile @@ -1,7 +1,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend COMMAND_ENABLE = no # Commands for debug and configuration RGBLIGHT_ENABLE ?= yes -MIDI_ENABLE ?= yes +MIDI_ENABLE ?= no ifndef MAKEFILE_INCLUDED include ../../../Makefile diff --git a/keyboards/ergodox/ez/config.h b/keyboards/ergodox/ez/config.h index a3dc5bf152ad..6a8c66d7d499 100644 --- a/keyboards/ergodox/ez/config.h +++ b/keyboards/ergodox/ez/config.h @@ -52,11 +52,12 @@ along with this program. If not, see . #define RGB_MIDI #define RGBW_BB_TWI +#define RGBW 1 /* Set 0 if debouncing isn't needed */ #define DEBOUNCE 5 -#define USB_MAX_POWER_CONSUMPTION 50 +#define USB_MAX_POWER_CONSUMPTION 500 /* * Feature disable options diff --git a/keyboards/ergodox/ez/rules.mk b/keyboards/ergodox/ez/rules.mk index 893cfa7a848e..64b2db8158e3 100644 --- a/keyboards/ergodox/ez/rules.mk +++ b/keyboards/ergodox/ez/rules.mk @@ -72,7 +72,7 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512 # SLEEP_LED_ENABLE = no -API_SYSEX_ENABLE ?= yes +API_SYSEX_ENABLE ?= no RGBLIGHT_ENABLE ?= yes ifndef QUANTUM_DIR diff --git a/keyboards/ergodox/keymaps/algernon/NEWS.md b/keyboards/ergodox/keymaps/algernon/NEWS.md index e11998998c07..ee9d606708f8 100644 --- a/keyboards/ergodox/keymaps/algernon/NEWS.md +++ b/keyboards/ergodox/keymaps/algernon/NEWS.md @@ -1,5 +1,19 @@ +## v1.10 + +*2016-12-28* + +### Miscellaneous + +* `µ` can now be entered with UCIS. +* `™` can now be entered with UCIS. + +### Tools + +* `tools/hid-commands` can now find Banshee, and prefers it over Kodi. +* `tools/hid-commands` can now find Chrome too, not juts Chromium. + ## v1.9 *2016-10-16* diff --git a/keyboards/ergodox/keymaps/algernon/keymap.c b/keyboards/ergodox/keymaps/algernon/keymap.c index bad240337841..b615f3f5fd26 100644 --- a/keyboards/ergodox/keymaps/algernon/keymap.c +++ b/keyboards/ergodox/keymaps/algernon/keymap.c @@ -96,8 +96,6 @@ enum { uint16_t gui_timer = 0; -uint16_t kf_timers[12]; - #if KEYLOGGER_ENABLE # ifdef AUTOLOG_ENABLE bool log_enable = true; @@ -786,7 +784,7 @@ static void ang_tap_dance_tmux_pane_select (qk_tap_dance_state_t *state, void *u if (state->count >= 2) { kc = KC_Z; } - + register_code(KC_LALT); register_code(KC_SPC); unregister_code(KC_SPC); @@ -1040,7 +1038,9 @@ const qk_ucis_symbol_t ucis_symbol_table[] = UCIS_TABLE UCIS_SYM("heart", 0x2764), UCIS_SYM("bolt", 0x26a1), UCIS_SYM("pi", 0x03c0), - UCIS_SYM("mouse", 0x1f401) + UCIS_SYM("mouse", 0x1f401), + UCIS_SYM("micro", 0x00b5), + UCIS_SYM("tm", 0x2122) ); bool process_record_user (uint16_t keycode, keyrecord_t *record) { diff --git a/keyboards/ergodox/keymaps/algernon/tools/hid-commands b/keyboards/ergodox/keymaps/algernon/tools/hid-commands index a29d38f414fd..54ca7556ab9a 100755 --- a/keyboards/ergodox/keymaps/algernon/tools/hid-commands +++ b/keyboards/ergodox/keymaps/algernon/tools/hid-commands @@ -16,7 +16,8 @@ _cmd_appsel () { } cmd_appsel_music () { - wmctrl -x -a rhythmbox || wmctrl -x -a spotify || wmctrl -x -a kodi || true + wmctrl -x -a rhythmbox || wmctrl -x -a spotify || \ + wmctrl -x -a banshee || wmctrl -x -a kodi || true xdotool key Escape } @@ -33,7 +34,7 @@ cmd_appsel_term () { } cmd_appsel_chrome () { - _cmd_appsel chromium + _cmd_appsel chrom } cmd_appsel_start () { diff --git a/keyboards/ergodox/keymaps/common-nighthawk/Makefile b/keyboards/ergodox/keymaps/common-nighthawk/Makefile new file mode 100644 index 000000000000..fafa40c43de2 --- /dev/null +++ b/keyboards/ergodox/keymaps/common-nighthawk/Makefile @@ -0,0 +1,6 @@ +SUBPROJECT_DEFAULT = ez +TAP_DANCE_ENABLE = yes + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/ergodox/keymaps/common-nighthawk/keymap.c b/keyboards/ergodox/keymaps/common-nighthawk/keymap.c new file mode 100644 index 000000000000..debf384f3d0d --- /dev/null +++ b/keyboards/ergodox/keymaps/common-nighthawk/keymap.c @@ -0,0 +1,216 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "version.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +//Tap Dance Declarations +enum { + TD_U_LBRC = 0, + TD_I_RBRC, +}; + +//Tap Dance Definitions +qk_tap_dance_action_t tap_dance_actions[] = { + [TD_U_LBRC] = ACTION_TAP_DANCE_DOUBLE(KC_U, KC_LBRC), + [TD_I_RBRC] = ACTION_TAP_DANCE_DOUBLE(KC_I, KC_RBRC) +}; + +//Macro Declarations +static uint16_t sunds_timer; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | _ | x | x | _ | Esc | Hypr | Home | | End | Hypr | [ | ] | `~ | `~ | Bks | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * |Ctrl/Tab| Q | W | E | R | T | Up | | PgUp | Y | U | I | O | P | Ctrl | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | Cmd/"' | A | S | D | F | G |------| |------| H | J | K | L | ;: |Cmd/Entr| + * |--------+------+------+------+------+------| Down | | PgDn |------+------+------+------+------+--------| + * | Shft | Z | X | C | V | B | | | | N | M | ,< | .> | /? | Shft | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | Alt | x | x | x | Left | |Right | Bks | x | x | Alt | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * |Teensy| VolUp| | Play | Del | + * ,------|------|------| |------+--------+------. + * | | | VolDn| | Next | | | + * |Sp/~L1| L2 |------| |------| L2 |'"/~L1| + * | | | Mute | | Prev | | | + * `--------------------' `----------------------' + */ +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_UNDS, KC_1, KC_1, KC_UNDS, KC_ESC, ALL_T(KC_NO), KC_HOME, + CTL_T(KC_TAB), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_UP, + M(1), KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_DOWN, + KC_LALT, KC_1, KC_1, KC_1, KC_LEFT, + RESET, KC_VOLU, + KC_VOLD, + LT(SYMB, KC_SPC), TG(MDIA), KC_MUTE, + // right hand + KC_END, ALL_T(KC_NO), KC_LBRC, KC_RBRC, KC_GRV, KC_GRV, KC_BSPC, + KC_PGUP, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LCTRL, + KC_H, KC_J, KC_K, KC_L, KC_SCOLON, GUI_T(KC_ENT), + KC_PGDN, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_RGHT, KC_BSPC, KC_1, KC_1, KC_RALT, + KC_MPLY, KC_DEL, + KC_MNXT, + KC_MPRV, TG(MDIA), LT(SYMB, KC_QUOT) + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | ^ | [ | ( | { | | | | = | 7 | 8 | 9 | 0 | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | & | $ | ] | ) | } |------| |------| + | 4 | 5 | 6 | * | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | \ | @ | # | % | | | | | | - | 1 | 2 | 3 | / | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | 0 | 0 | . | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS, KC_EXLM, KC_CIRC, KC_LBRC, KC_LPRN, KC_LCBR, KC_TRNS, + KC_TRNS, KC_AMPR, KC_DLR, KC_RBRC, KC_RPRN, KC_RCBR, + KC_TRNS, KC_BSLS, KC_AT, KC_HASH, KC_PERC, KC_PIPE, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS, + KC_TRNS, KC_EQL, KC_7, KC_8, KC_9, KC_0, KC_TRNS, + KC_PLUS, KC_4, KC_5, KC_6, KC_ASTR, KC_TRNS, + KC_TRNS, KC_MINS, KC_1, KC_2, KC_3, KC_TRNS, KC_TRNS, + KC_0, KC_0, KC_DOT, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * |Version | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | | | | | | WhDn | WhUp | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | R-Ck | L-Ck | |------| |------| MsLt | MsDn | MsUp | MsRt | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + M(0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN2, KC_BTN1, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_WH_U, KC_WH_D, KC_TRNS, KC_TRNS, KC_TRNS, + KC_MS_LEFT, KC_MS_DOWN, KC_MS_UP, KC_MS_RIGHT, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + break; + + case 1: + if (record->event.pressed) { + sunds_timer = timer_read(); + register_code (KC_LGUI); + } else { + if (timer_elapsed (sunds_timer) < TAPPING_TERM) { + unregister_code (KC_LGUI); + register_code (KC_LSFT); + register_code (KC_QUOT); + unregister_code (KC_QUOT); + unregister_code (KC_LSFT); + register_code (KC_LGUI); + } + unregister_code (KC_LGUI); + } + break; + + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_3_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + if (keyboard_report->mods & MOD_BIT(KC_LSFT)) { + ergodox_right_led_1_on (); + } +}; diff --git a/keyboards/ergodox/keymaps/deadcyclo/keymap.c b/keyboards/ergodox/keymaps/deadcyclo/keymap.c new file mode 100644 index 000000000000..d75c805bfe01 --- /dev/null +++ b/keyboards/ergodox/keymaps/deadcyclo/keymap.c @@ -0,0 +1,273 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "version.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys +#define NAVG 3 // navigation + +enum custom_keycodes { + PLACEHOLDER = SAFE_RANGE, // can always be here + EPRM, + VRSN, + RGB_SLD +}; + +// TODO: Get rid of of keys I don't want. Make others that I do. Set up lots of makros (Using hyper (and meh)) keys (where to put them?) +// TODO: Need to change hotkeys for lastpass, and potentially make my own keys for them on one of my layers +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | Esc/L3 | 1 | 2 | 3 | 4 | 5 | 6 | | 6 | 7 | 8 | 9 | 0 | - | =/L3 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab/L1 | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \/L1 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | LCtrl | A | S | D | F | G |------| |------| H | J | K | L |; / L2| ctrl/'| + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Lalt | Ralt | | Lalt | Ralt | [ | ] | ~/L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | Home | | PgUp | Ins | + * ,------|------|------| |------+--------+------. + * | | | End | | PgDn | | | + * | Space| TAB |------| |------| BSPC |Enter | + * | | | [ | | ] | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + LT(NAVG,KC_ESC), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, + LT(SYMB,KC_TAB), KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_RALT,KC_LALT, + ALT_T(KC_APP), KC_HOME, + KC_END, + KC_SPC,KC_TAB,KC_LBRC, + // right hand + KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, LT(NAVG,KC_EQL), + TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, LT(SYMB, KC_BSLS), + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),CTL_T(KC_QUOT), + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_LALT, KC_RALT,KC_LBRC,KC_RBRC, LT(SYMB,KC_TILD), + KC_PGUP, KC_INS, + KC_PGDN, + KC_RBRC,KC_BSPC, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | F6 | | F6 | F7 | F8 | F9 | F10 | F11 | F12 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| DEL | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_TRNS, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_DEL, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), + +/* Keymap 3: Navigation TODO: Printscreen, pg up down, home, end, others? Insert for example + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | VER | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | up | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | left | down | right| |------| |------| | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// NAVIGATION +[NAVG] = KEYMAP( + KC_TRNS, VRSN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + break; + case 1: + if (record->event.pressed) { // For resetting EEPROM + eeconfig_init(); + } + break; + } + return MACRO_NONE; +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + // dynamically generate these. + case EPRM: + if (record->event.pressed) { + eeconfig_init(); + } + return false; + break; + case VRSN: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + return false; + break; + case RGB_SLD: + if (record->event.pressed) { + #ifdef RGBLIGHT_ENABLE + rgblight_mode(1); + #endif + } + return false; + break; + } + return true; +} + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + case 3: + ergodox_right_led_3_on(); + break; + case 4: + ergodox_right_led_1_on(); // TODO: Make a fourth layer + ergodox_right_led_3_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/deadcyclo/readme.md b/keyboards/ergodox/keymaps/deadcyclo/readme.md new file mode 100644 index 000000000000..9155074409ba --- /dev/null +++ b/keyboards/ergodox/keymaps/deadcyclo/readme.md @@ -0,0 +1,10 @@ +# ErgoDox EZ 1337 configuration + +Custom layout based on the default layout. Intended for interational users of us intl-altgr layout. Note that +some common keys might be missing, as this layout is intented to be used on *nix systems by users familiar +with their system. The layout is geared towards avoiding using the rat (mouse for those of you who are +unfamiliar with tiling window managers) as much as possibly. + +# Changelog + +- 02.01.2017 Added delete key on second layer diff --git a/keyboards/ergodox/keymaps/default/default_firmware_v1.2-2.png b/keyboards/ergodox/keymaps/default/default_firmware_v1.2-2.png new file mode 100644 index 000000000000..e3c321cc09f7 Binary files /dev/null and b/keyboards/ergodox/keymaps/default/default_firmware_v1.2-2.png differ diff --git a/keyboards/ergodox/keymaps/default/readme.md b/keyboards/ergodox/keymaps/default/readme.md index f68138ed628f..979ce0f5b8fd 100644 --- a/keyboards/ergodox/keymaps/default/readme.md +++ b/keyboards/ergodox/keymaps/default/readme.md @@ -2,6 +2,9 @@ ## Changelog +* Dec 2016: + * Added LED keys + * Refreshed layout graphic, comes from http://configure.ergodox-ez.com now. * Sep 22, 2016: * Created a new key in layer 1 (bottom-corner key) that resets the EEPROM. * Feb 2, 2016 (V1.1): @@ -9,4 +12,4 @@ This is what we ship with out of the factory. :) The image says it all: -![Default](default_highres.png) +![Default](default_firmware_v1.2-2.png) diff --git a/keyboards/ergodox/keymaps/ishigoya-jp/img/keyboard-layout-enL.png b/keyboards/ergodox/keymaps/ishigoya-jp/img/keyboard-layout-enL.png new file mode 100755 index 000000000000..e6aec35bffb5 Binary files /dev/null and b/keyboards/ergodox/keymaps/ishigoya-jp/img/keyboard-layout-enL.png differ diff --git a/keyboards/ergodox/keymaps/ishigoya-jp/img/keyboard-layout-jpL.png b/keyboards/ergodox/keymaps/ishigoya-jp/img/keyboard-layout-jpL.png new file mode 100755 index 000000000000..69a1f69482b7 Binary files /dev/null and b/keyboards/ergodox/keymaps/ishigoya-jp/img/keyboard-layout-jpL.png differ diff --git a/keyboards/ergodox/keymaps/ishigoya-jp/img/keyboard-layout-numL.png b/keyboards/ergodox/keymaps/ishigoya-jp/img/keyboard-layout-numL.png new file mode 100755 index 000000000000..8b2cce5e6db6 Binary files /dev/null and b/keyboards/ergodox/keymaps/ishigoya-jp/img/keyboard-layout-numL.png differ diff --git a/keyboards/ergodox/keymaps/ishigoya-jp/keymap.c b/keyboards/ergodox/keymaps/ishigoya-jp/keymap.c new file mode 100644 index 000000000000..c219ce884050 --- /dev/null +++ b/keyboards/ergodox/keymaps/ishigoya-jp/keymap.c @@ -0,0 +1,962 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "keymap_jp.h" + +static uint16_t start; + +#define BASE 0 // EN layer +#define JP 1 // Japanese +#define JPXON 2 // JP + Fn +#define JPKAZARI 3 // JP + KAZARI +#define JPTOPROW 4 // JP + TOPROW +#define JPTRKZ 5 // JP + TOPROW + KAZARI +#define NUM 6 // Numbers + +#define CTLSHFT 1 +#define CUTCOPY 2 + +//kana macro definitions start here + +#define JPVU 4 +#define JPNU 6 +#define JPKO 7 +#define JPSA 8 +#define JPKE 9 +#define JPHE 10 +#define JPSHI 11 +#define JPKA 12 +#define JPKI 13 +#define JPSU 14 +#define JPSO 15 +#define JPHI 16 +#define JPCHI 17 +#define JPFU 18 +#define JPSE 19 +#define JPTSU 20 +#define JPKU 21 +#define JPTE 22 +#define JPTA 23 +#define JPTO 24 +#define JPHA 25 +#define JPHO 26 +#define JPXKE 27 +#define JPXU 28 +#define JPXKA 29 +#define JPXA 30 +#define JPXO 31 +#define JPGO 32 +#define JPZA 33 +#define JPGE 34 +#define JPBE 35 +#define JPYU 36 +#define JPJI 37 +#define JPGA 38 +#define JPGI 39 +#define JPZU 40 +#define JPZO 41 +#define JPBI 42 +#define JPDI 43 +#define JPZE 44 +#define JPDU 45 +#define JPGU 46 +#define JPYA 47 +#define JPYO 48 +#define JPDE 49 +#define JPDA 50 +#define JPDO 51 +#define JPBA 52 +#define JPBO 53 +#define JPRI 54 +#define JPRE 55 +#define JPRA 56 +#define JPNA 57 +#define JPNO 58 +#define JPMI 59 +#define JPMU 60 +#define JPME 61 +#define JPNE 62 +#define JPMA 63 +#define JPXTU 64 +#define JPWA 65 +#define JPRU 66 +#define JPWO 67 +#define JPNI 68 +#define JPNN 69 +#define JPMO 70 +#define JPRO 71 +#define JPXE 72 +#define JPXI 73 +#define JPXYU 74 +#define JPXYA 75 +#define JPXYO 76 +#define JPPE 77 +#define JPPU 78 +#define JPPI 79 +#define JPPA 80 +#define JPPO 81 +#define JPBU 82 + +// kana macro definitions end here + +#define SHIFT 86 +#define KAZARI 87 +#define JPFN 88 //shifts to JPXON layer +#define TOJPLOUT 89 +#define TOENL 90 +#define TOJPL 91 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * + * ,----------------------------------------------------. ,--------------------------------------------------. + * | En / 和 | | ^ | % | | |Selall| | Undo | | $ | @ | LT | UP | RT | + * |----------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | D | R | W | B | Cut | | PgUP | J | F | U | P | DN | \ | + * |----------+------+------+------+------+------| Copy | | |------+------+------+------+------+--------| + * | / | A | S | H | T | G |------| |------| Y | N | E | O | I | , | + * |----------+------+------+------+------+------|Paste | | PgDN |------+------+------+------+------+--------| + * | Ctl+Shft | Z | X | M | C | V | | | | . | L | K | ' | ? | tmux | + * `----------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | LCtrl | LGui | Alt| _ | Esc | |MouseL|MouseR| - | ~ | Ctrl | + * `------------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * |MidMs | Del | | VolUp| Mute | + * ,------|------|------| |------+--------+------. + * | | | | | VolDn| | | + * | Space| Shift|------| |------| Backsp |Enter | + * | | | Num | | Esc | | | + * `--------------------' `----------------------' + * + * + * tmux prefix set to C-b + * + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + M(TOJPLOUT), KC_NO, KC_EQL, LSFT(KC_5), KC_NO, KC_NO, LCTL(KC_A), + KC_TAB, KC_Q, KC_D, KC_R, KC_W, KC_B, M(CUTCOPY), + KC_SLSH, KC_A, KC_S, KC_H, KC_T, KC_G, + M(CTLSHFT), KC_Z, KC_X, KC_M, KC_C, KC_V, LCTL(KC_V), + KC_RCTL, KC_LGUI, KC_LALT,JP_UNDS,KC_LCTL, + KC_BTN3, KC_DEL, + KC_NO, + KC_SPC,KC_LSFT,F(1), + // right hand + LCTL(KC_Z), KC_NO, LSFT(KC_4), JP_AT, KC_LEFT, KC_UP, KC_RIGHT, + KC_PGUP, KC_J, KC_F, KC_U, KC_P, KC_DOWN, LSFT(KC_3), + KC_Y, KC_N, KC_E, KC_O, KC_I, KC_COMMA, + KC_PGDN, KC_DOT, KC_L, KC_K, LSFT(KC_7), KC_QUES, LCTL(KC_B), + KC_BTN1, KC_BTN2,KC_MINS,JP_TILD, KC_RCTL, + KC_VOLU, KC_MUTE, + KC_VOLD, + KC_SPC,KC_BSLS, KC_ENT + ), +/* Keymap 1: Japanese + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | En / 和| | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | 　 nu | ko | sa | he | ke | | | | fu | se | tsu | ku | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | to | shi | ka | ki | su |------| |------| a | ha | te | ta | u | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | mu | so | hi | chi | me | | | | | ma | ho | i | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | shift| fn |------| |------| |kazari| + * | | | Num | | | | | + * `--------------------' `--------------------' + * + * + * + */ +[JP] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, M(JPNU), M(JPKO), M(JPSA), M(JPHE), M(JPKE), KC_TRNS, + KC_TRNS, M(JPTO), M(JPSHI), M(JPKA), M(JPKI), M(JPSU), + KC_TRNS, M(JPMU), M(JPSO), M(JPHI), M(JPCHI), M(JPME), KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_NO, + M(SHIFT), M(JPFN), F(1), + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, M(JPFU), M(JPSE), M(JPTSU), M(JPKU), KC_TRNS, KC_TRNS, + KC_A, M(JPHA), M(JPTE), M(JPTA), KC_U, KC_TRNS, + KC_TRNS, KC_TRNS, M(JPMA), M(JPHO), KC_I, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,M(KAZARI) +), +/* Keymap 2: Japanese with Fn + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | 　 | xe | | | xke | | | | xya | | xtsu | xo | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | xka | | |------| |------| xa | xyo | | | xu | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | | xi | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + * + * + * + */ +[JPXON] = KEYMAP( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, M(JPXE), KC_NO, M(JPXKE), KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, M(JPXKA), KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, + KC_NO, + KC_NO, KC_TRNS, KC_TRNS, + // right hand + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, M(JPXYA), KC_NO, M(JPXTU), M(JPXO), KC_NO, KC_NO, + M(JPXA), M(JPXYO), M(JPXYU), KC_NO, M(JPXU), KC_NO, + KC_NO, KC_NO,KC_NO, KC_NO, M(JPXI), KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, + KC_NO, + KC_NO, KC_NO, KC_NO +), +/* Keymap 3: Japanese with kazari + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | 　 | go | za | be | ge | | | | bu | ze | du | gu | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | do | ji | ga | gi | zu |------| |------| | ba | de | da | vu | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | zo | bi | di | | | | | | | bo | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + * + * + * + */ +[JPKAZARI] = KEYMAP( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, M(JPGO), M(JPZA), M(JPBE), M(JPGE), KC_NO, + KC_NO, M(JPDO), M(JPJI), M(JPGA), M(JPGI), M(JPZU), + KC_NO, KC_NO, M(JPZO), M(JPBI), M(JPDI), KC_NO, KC_NO, + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, + KC_NO, + M(SHIFT), KC_NO, KC_TRNS, + // right hand + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, M(JPBU), M(JPZE), M(JPDU), M(JPGU), KC_NO, KC_NO, + KC_NO, M(JPBA), M(JPDE), M(JPDA), M(JPVU), KC_NO, + KC_NO, KC_NO, KC_NO, M(JPBO), KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, + KC_NO, + KC_NO, KC_NO, KC_TRNS +), +/* Keymap 4: Japanese with Toprow + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | 　 | e | - | re | | | | | ya | ne | ru | o | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | ra | ri | na | no | mi |------| |------| wa | yo | yu | ni | nn | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | mo | ro | wo | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + * + * + * + */ +[JPTOPROW] = KEYMAP( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_E, KC_MINS, M(JPRE), KC_NO, KC_NO, + KC_NO, M(JPRA), M(JPRI), M(JPNA), M(JPNO), M(JPMI), + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, + KC_NO, + KC_TRNS, KC_NO, KC_NO, + // right hand + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, M(JPYA), M(JPNE), M(JPRU), KC_O, KC_NO, KC_NO, + M(JPWA), M(JPYO), M(JPYU), M(JPNI), M(JPNN), KC_NO, + KC_NO, KC_NO, M(JPMO), M(JPRO), M(JPWO), KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, + KC_NO, + KC_NO, KC_NO, M(KAZARI) +), + +/* Keymap 5: Japanese with Toprow and Kazari + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | 　 | | | pe | | | | | pu | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | |------| |------| | pa | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | pi | | | | | | | | po | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + * + * + * + */ +[JPTRKZ] = KEYMAP( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, M(JPPE),KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, M(JPPI), KC_NO, KC_NO, KC_NO, + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, + KC_NO, + KC_TRNS, KC_NO, KC_NO, + // right hand + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, M(JPPU), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, M(JPPA), KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, M(JPPO), KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, + KC_NO, + KC_NO, KC_NO, KC_TRNS +), +/* Keymap 6: Number Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | " | [ | ] | | | | | % | 7 | 8 | 9 | | F12 | + * |--------+------+------+------+------+------| ; | | |------+------+------+------+------+--------| + * | | | / | + | { | } |------| |------| ! | 4 | 5 | 6 | 0 | , | + * |--------+------+------+------+------+------| : | | & |------+------+------+------+------+--------| + * | | | * | - | ( | ) | | | | . | 1 | 2 | 3 | ? | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | # | | < | = | > | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| Back | Ent | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// Numbers +[NUM] = KEYMAP( + // left hand + KC_NO, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_NO, + KC_NO, KC_NO, KC_NO, JP_DQT, KC_RBRACKET, KC_BSPC, KC_SCLN, + KC_NO, KC_NO, KC_SLSH, JP_PLUS, LSFT(KC_RBRACKET), JP_RCBR, + KC_NO, KC_NO, JP_ASTR, KC_MINS, LSFT(KC_8), LSFT(KC_9), JP_COLN, + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_HASH, + KC_NO, KC_NO, + KC_NO, + KC_NO, KC_NO, KC_TRNS, + // right hand + KC_NO, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + LSFT(KC_JYEN), KC_PERC, KC_7, KC_8, KC_9, KC_NO, KC_F12, + KC_EXLM, KC_4, KC_5, KC_6, KC_0, KC_COMM, + LSFT(KC_6), KC_DOT, KC_1, KC_2, KC_3, KC_QUES, KC_NO, + KC_LT,JP_EQL, KC_GT, KC_NO, KC_NO, + KC_NO, KC_NO, + KC_NO, + KC_SPC, KC_BSLS, KC_DOT +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(NUM) // FN1 - Momentary Layer 6 (Numbers) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + + // MACRO only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + case CTLSHFT: + if (record->event.pressed) { + return MACRO( D(LSFT), D(LCTL), END); + } else { + return MACRO( U(LSFT), U(LCTL), END); + } + break; + case CUTCOPY: + if (record->event.pressed) { + start = timer_read(); + } else { + if (timer_elapsed(start) > 150) { + return MACRO( D(LCTL), T(X), U(LCTL), END); + } else { + return MACRO( D(LCTL), T(C), U(LCTL), END); + } + } + break; + + // kana macros start here + + case JPVU: + if (record->event.pressed) { + return MACRO( I(1), T(V), T(U), END); + } + break; + case JPNU: + if (record->event.pressed) { + return MACRO( I(1), T(N), T(U), END); + } + break; + case JPKO: + if (record->event.pressed) { + return MACRO( I(1), T(K), T(O), END); + } + break; + case JPSA: + if (record->event.pressed) { + return MACRO( I(1), T(S), T(A), END); + } + break; + case JPKE: + if (record->event.pressed) { + return MACRO( I(1), T(K), T(E), END); + } + break; + case JPHE: + if (record->event.pressed) { + return MACRO( I(1), T(H), T(E), END); + } + break; + case JPSHI: + if (record->event.pressed) { + return MACRO( I(1), T(S), T(I), END); + } + break; + case JPKA: + if (record->event.pressed) { + return MACRO( I(1), T(K), T(A), END); + } + break; + case JPKI: + if (record->event.pressed) { + return MACRO( I(1), T(K), T(I), END); + } + break; + case JPSU: + if (record->event.pressed) { + return MACRO( I(1), T(S), T(U), END); + } + break; + case JPSO: + if (record->event.pressed) { + return MACRO( I(1), T(S), T(O), END); + } + break; + case JPHI: + if (record->event.pressed) { + return MACRO( I(1), T(H), T(I), END); + } + break; + case JPCHI: + if (record->event.pressed) { + return MACRO( I(1), T(T), T(I), END); + } + break; + case JPFU: + if (record->event.pressed) { + return MACRO( I(1), T(F), T(U), END); + } + break; + case JPSE: + if (record->event.pressed) { + return MACRO( I(1), T(S), T(E), END); + } + break; + case JPTSU: + if (record->event.pressed) { + return MACRO( I(1), T(T), T(U), END); + } + break; + case JPKU: + if (record->event.pressed) { + return MACRO( I(1), T(K), T(U), END); + } + break; + case JPTE: + if (record->event.pressed) { + return MACRO( I(1), T(T), T(E), END); + } + break; + case JPTA: + if (record->event.pressed) { + return MACRO( I(1), T(T), T(A), END); + } + break; + case JPTO: + if (record->event.pressed) { + return MACRO( I(1), T(T), T(O), END); + } + break; + case JPHA: + if (record->event.pressed) { + return MACRO( I(1), T(H), T(A), END); + } + break; + case JPHO: + if (record->event.pressed) { + return MACRO( I(1), T(H), T(O), END); + } + break; + case JPXKE: + if (record->event.pressed) { + return MACRO( I(1), T(X), T(K), T(E), END); + } + break; + case JPXU: + if (record->event.pressed) { + return MACRO( I(1), T(X), T(U), END); + } + break; + case JPXKA: + if (record->event.pressed) { + return MACRO( I(1), T(X), T(K), T(A), END); + } + break; + case JPXA: + if (record->event.pressed) { + return MACRO( I(1), T(X), T(A), END); + } + break; + case JPXO: + if (record->event.pressed) { + return MACRO( I(1), T(X), T(O), END); + } + break; + case JPGO: + if (record->event.pressed) { + return MACRO( I(1), T(G), T(O), END); + } + break; + case JPZA: + if (record->event.pressed) { + return MACRO( I(1), T(Z), T(A), END); + } + break; + case JPGE: + if (record->event.pressed) { + return MACRO( I(1), T(G), T(E), END); + } + break; + case JPBE: + if (record->event.pressed) { + return MACRO( I(1), T(B), T(E), END); + } + break; + case JPYU: + if (record->event.pressed) { + return MACRO( I(1), T(Y), T(U), END); + } + break; + case JPJI: + if (record->event.pressed) { + return MACRO( I(1), T(J), T(I), END); + } + break; + case JPGA: + if (record->event.pressed) { + return MACRO( I(1), T(G), T(A), END); + } + break; + case JPGI: + if (record->event.pressed) { + return MACRO( I(1), T(G), T(I), END); + } + break; + case JPZU: + if (record->event.pressed) { + return MACRO( I(1), T(Z), T(U), END); + } + break; + case JPZO: + if (record->event.pressed) { + return MACRO( I(1), T(Z), T(O), END); + } + break; + case JPBI: + if (record->event.pressed) { + return MACRO( I(1), T(B), T(I), END); + } + break; + case JPDI: + if (record->event.pressed) { + return MACRO( I(1), T(D), T(I), END); + } + break; + case JPZE: + if (record->event.pressed) { + return MACRO( I(1), T(Z), T(E), END); + } + break; + case JPDU: + if (record->event.pressed) { + return MACRO( I(1), T(D), T(U), END); + } + break; + case JPGU: + if (record->event.pressed) { + return MACRO( I(1), T(G), T(U), END); + } + break; + case JPYA: + if (record->event.pressed) { + return MACRO( I(1), T(Y), T(A), END); + } + break; + case JPYO: + if (record->event.pressed) { + return MACRO( I(1), T(Y), T(O), END); + } + break; + case JPDE: + if (record->event.pressed) { + return MACRO( I(1), T(D), T(E), END); + } + break; + case JPDA: + if (record->event.pressed) { + return MACRO( I(1), T(D), T(A), END); + } + break; + case JPDO: + if (record->event.pressed) { + return MACRO( I(1), T(D), T(O), END); + } + break; + case JPBA: + if (record->event.pressed) { + return MACRO( I(1), T(B), T(A), END); + } + break; + case JPBO: + if (record->event.pressed) { + return MACRO( I(1), T(B), T(O), END); + } + break; + case JPRI: + if (record->event.pressed) { + return MACRO( I(1), T(R), T(I), END); + } + break; + case JPRE: + if (record->event.pressed) { + return MACRO( I(1), T(R), T(E), END); + } + break; + case JPRA: + if (record->event.pressed) { + return MACRO( I(1), T(R), T(A), END); + } + break; + case JPNA: + if (record->event.pressed) { + return MACRO( I(1), T(N), T(A), END); + } + break; + case JPNO: + if (record->event.pressed) { + return MACRO( I(1), T(N), T(O), END); + } + break; + case JPMI: + if (record->event.pressed) { + return MACRO( I(1), T(M), T(I), END); + } + break; + case JPMU: + if (record->event.pressed) { + return MACRO( I(1), T(M), T(U), END); + } + break; + case JPME: + if (record->event.pressed) { + return MACRO( I(1), T(M), T(E), END); + } + break; + case JPNE: + if (record->event.pressed) { + return MACRO( I(1), T(N), T(E), END); + } + break; + case JPMA: + if (record->event.pressed) { + return MACRO( I(1), T(M), T(A), END); + } + break; + case JPXTU: + if (record->event.pressed) { + return MACRO( I(1), T(X), T(T), T(U), END); + } + break; + case JPWA: + if (record->event.pressed) { + return MACRO( I(1), T(W), T(A), END); + } + break; + case JPRU: + if (record->event.pressed) { + return MACRO( I(1), T(R), T(U), END); + } + break; + case JPWO: + if (record->event.pressed) { + return MACRO( I(1), T(W), T(O), END); + } + break; + case JPNI: + if (record->event.pressed) { + return MACRO( I(1), T(N), T(I), END); + } + break; + case JPNN: + if (record->event.pressed) { + return MACRO( I(1), T(N), T(N), END); + } + break; + case JPMO: + if (record->event.pressed) { + return MACRO( I(1), T(M), T(O), END); + } + break; + case JPRO: + if (record->event.pressed) { + return MACRO( I(1), T(R), T(O), END); + } + break; + case JPXE: + if (record->event.pressed) { + return MACRO( I(1), T(X), T(E), END); + } + break; + case JPXI: + if (record->event.pressed) { + return MACRO( I(1), T(X), T(I), END); + } + break; + case JPXYU: + if (record->event.pressed) { + return MACRO( I(1), T(X), T(Y), T(U), END); + } + break; + case JPXYA: + if (record->event.pressed) { + return MACRO( I(1), T(X), T(Y), T(A), END); + } + break; + case JPXYO: + if (record->event.pressed) { + return MACRO( I(1), T(X), T(Y), T(O), END); + } + break; + case JPPE: + if (record->event.pressed) { + return MACRO( I(1), T(P), T(E), END); + } + break; + case JPPU: + if (record->event.pressed) { + return MACRO( I(1), T(P), T(U), END); + } + break; + case JPPI: + if (record->event.pressed) { + return MACRO( I(1), T(P), T(I), END); + } + break; + case JPPA: + if (record->event.pressed) { + return MACRO( I(1), T(P), T(A), END); + } + break; + case JPPO: + if (record->event.pressed) { + return MACRO( I(1), T(P), T(O), END); + } + break; + case JPBU: + if (record->event.pressed) { + return MACRO( I(1), T(B), T(U), END); + } + break; + + // kana macros end here + + break; + case SHIFT: + if (record->event.pressed) { + start = timer_read(); + if (layer_state == (1<event.pressed) { + start = timer_read(); + if (layer_state == (1<event.pressed) { + start = timer_read(); + layer_state = (1<event.pressed) { + if (default_layer_state == (1<event.pressed) { + default_layer_state = (1<event.pressed) { + default_layer_state = (1< \ No newline at end of file + id="path27-0-9" + d="m -735.12026,332.04089 a 5.25588,5.25588 0 1 0 -10.51176,0 5.25588,5.25588 0 0 0 10.51176,0 z" + style="display:inline;fill:none;stroke:#0000ff;stroke-width:0.03543307;stroke-linecap:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" /> \ No newline at end of file diff --git a/keyboards/lets_split/imgs/plate.stl b/keyboards/lets_split/imgs/plate.stl new file mode 100644 index 000000000000..c8e36adc70ae Binary files /dev/null and b/keyboards/lets_split/imgs/plate.stl differ diff --git a/keyboards/lets_split/imgs/right.stl b/keyboards/lets_split/imgs/right.stl new file mode 100644 index 000000000000..31c7aeb6b2da Binary files /dev/null and b/keyboards/lets_split/imgs/right.stl differ diff --git a/keyboards/planck/config.h b/keyboards/planck/config.h index 4dd1d22a9521..5cf96bb88cb0 100644 --- a/keyboards/planck/config.h +++ b/keyboards/planck/config.h @@ -36,6 +36,8 @@ along with this program. If not, see . #define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 } #define UNUSED_PINS +#define AUDIO_VOICES + #define BACKLIGHT_PIN B7 /* COL2ROW or ROW2COL */ diff --git a/keyboards/planck/keymaps/default/Makefile b/keyboards/planck/keymaps/default/Makefile index 17487ebbfc8f..457a3d01d4a4 100644 --- a/keyboards/planck/keymaps/default/Makefile +++ b/keyboards/planck/keymaps/default/Makefile @@ -1,25 +1,3 @@ - - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = yes # MIDI controls -AUDIO_ENABLE = yes # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - ifndef QUANTUM_DIR include ../../../../Makefile endif diff --git a/keyboards/planck/keymaps/jeremy-dev/keymap.c b/keyboards/planck/keymaps/jeremy-dev/keymap.c new file mode 100644 index 000000000000..e7ed09b122a5 --- /dev/null +++ b/keyboards/planck/keymaps/jeremy-dev/keymap.c @@ -0,0 +1,180 @@ +// This is the personal keymap of Jeremy Cowgar (@jcowgar). It is written for the programmer. + +// Configuration options +#define PREVENT_STUCK_MODIFIERS + +#include "planck.h" +#include "action_layer.h" +#include "eeconfig.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +enum my_layers { + ALPH = 0, + NUMS, + CURS, + SYMB, + FKEY +}; + +// Each macro gets a name for readability. +enum my_keycodes { + MY_ABVE = SAFE_RANGE, + MY_BELW, + MY_TERM, + MY_DEQL, // /= + MY_MEQL, // *= + MY_SEQL, // -= + MY_PEQL, // += + MY_NEQL, // != + MY_LTGT, // <> + MY_DPIP, // || + MY_DAMP, // && +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [ALPH] = { + {KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LBRC, KC_RBRC, KC_Y, KC_U, KC_I, KC_O, KC_P}, + {KC_A, KC_S, KC_D, KC_F, KC_G, KC_LPRN, KC_RPRN, KC_H, KC_J, KC_K, KC_L, KC_SCLN}, + {SFT_T(KC_Z), KC_X, KC_C, KC_V, KC_B, KC_LCBR, KC_RCBR, KC_N, KC_M, KC_COMM, KC_DOT, SFT_T(KC_SLSH)}, + {CTL_T(KC_TAB), OSL(FKEY), OSL(NUMS), OSL(SYMB), KC_SPC, ALT_T(KC_BSPC), GUI_T(KC_DELT), KC_ENT, OSL(SYMB), OSL(CURS), TG(CURS), CTL_T(KC_ESC)} + }, + [NUMS] = { + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_TRNS, KC_COMM, KC_7, KC_8, KC_9, KC_SLSH}, + {KC_LSFT, KC_LGUI, KC_LALT, KC_LCTL, KC_NO, KC_TRNS, KC_TRNS, KC_LPRN, KC_4, KC_5, KC_6, KC_ASTR}, + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_TRNS, KC_RPRN, KC_1, KC_2, KC_3, KC_MINS}, + {KC_NO, KC_NO, KC_TRNS, TG(NUMS), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_0, KC_DOT, KC_EQL, KC_PLUS} + }, + [CURS] = { + {KC_MPLY, KC_BSPC, KC_UP, KC_DELT, KC_PGUP, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, + {KC_VOLU, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_TRNS, KC_TRNS, KC_NO, KC_LCTL, KC_LALT, KC_LGUI, KC_LSFT}, + {KC_VOLD, KC_NO, MY_ABVE, MY_TERM, KC_NO, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_LSFT}, + {KC_MUTE, KC_NO, MY_BELW, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_NO} + }, + [SYMB] = { + {MY_DEQL, MY_MEQL, MY_SEQL, MY_PEQL, MY_NEQL, KC_NO, KC_NO, MY_LTGT, KC_LABK, KC_RABK, KC_COLN, KC_DLR}, + {KC_SLSH, KC_ASTR, KC_MINS, KC_PLUS, KC_EQL, KC_NO, KC_PIPE, MY_DPIP, KC_GRV, KC_QUOT, KC_DQUO, KC_HASH}, + {KC_BSLS, KC_CIRC, KC_PERC, KC_UNDS, KC_NO, KC_NO, KC_AMPR, MY_DAMP, KC_TILD, KC_AT, KC_EXLM, KC_QUES}, + {KC_NO, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_NO} + }, + [FKEY] = { + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_F9, KC_F10, KC_F11, KC_F12}, + {KC_LSFT, KC_LGUI, KC_LALT, KC_LCTL, KC_NO, KC_NO, KC_NO, KC_NO, KC_F5, KC_F6, KC_F7, KC_F8}, + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_F1, KC_F2, KC_F3, KC_F4}, + {KC_NO, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO} + } +}; + +void press_key(uint16_t key) { + register_code(key); + unregister_code(key); +} + +void press_two_keys(uint16_t key1, uint16_t key2) { + register_code(key1); + register_code(key2); + unregister_code(key2); + unregister_code(key1); +} + +void press_three_keys(uint16_t key1, uint16_t key2, uint16_t key3) { + register_code(key1); + register_code(key2); + register_code(key3); + unregister_code(key3); + unregister_code(key2); + unregister_code(key1); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case MY_BELW: + if (record->event.pressed) { + press_two_keys(KC_LGUI, KC_RGHT); + press_key(KC_ENT); + } + + return false; + + case MY_ABVE: + if (record->event.pressed) { + press_two_keys(KC_LGUI, KC_LEFT); + press_key(KC_ENT); + press_key(KC_UP); + } + + return false; + + case MY_TERM: + if (record->event.pressed) { + press_three_keys(KC_LGUI, KC_LSFT, KC_ENT); + } + + return false; + + case MY_DEQL: // /= + if (record->event.pressed) { + press_key(KC_SLSH); + press_key(KC_EQL); + } + + return false; + + case MY_MEQL: // *= + if (record->event.pressed) { + press_two_keys(KC_LSFT, KC_ASTR); + press_key(KC_EQL); + } + + return false; + + case MY_SEQL: // -= + if (record->event.pressed) { + press_key(KC_MINS); + press_key(KC_EQL); + } + + return false; + + case MY_PEQL: // += + if (record->event.pressed) { + press_two_keys(KC_LSFT, KC_PLUS); + press_key(KC_EQL); + } + + return false; + + case MY_NEQL: // != + if (record->event.pressed) { + press_two_keys(KC_LSFT, KC_EXLM); + press_key(KC_EQL); + } + + return false; + + case MY_LTGT: // <> + if (record->event.pressed) { + press_two_keys(KC_LSFT, KC_LABK); + press_two_keys(KC_LSFT, KC_RABK); + } + + return false; + + case MY_DPIP: // || + if (record->event.pressed) { + press_two_keys(KC_LSFT, KC_PIPE); + press_two_keys(KC_LSFT, KC_PIPE); + } + + return false; + + case MY_DAMP: // && + if (record->event.pressed) { + press_two_keys(KC_LSFT, KC_AMPR); + press_two_keys(KC_LSFT, KC_AMPR); + } + + return false; + } + + return true; +} diff --git a/keyboards/planck/keymaps/jeremy-dev/readme.md b/keyboards/planck/keymaps/jeremy-dev/readme.md new file mode 100644 index 000000000000..b6a402d698c7 --- /dev/null +++ b/keyboards/planck/keymaps/jeremy-dev/readme.md @@ -0,0 +1,85 @@ +Jeremy Cowgar's Planck Keymap +============================= + +I am a programmer by trade and suffer from the beginning stages of RSI. As a programmer, I use letters, symbols and cursor navigation most often. To prevent strange finger gymnastics, I wrote a script to rank which non-letter characters occurred in my primary source projects most often and then placed these characters in the easiest to reach locations, within reason and for me. I made heavy use of momentary layer toggling. + +Layers +------ + +The key mapping is made up of 5 layers: Letters, Symbols, Navigation, Numbers, and Function Keys. + +The layout can be viewed visually at: + +http://www.keyboard-layout-editor.com/#/gists/319474e5e2d199e583371ed1d2aec316 + +* Purple buttons are dual function keys. +* Green buttons are layer momentary toggle keys. +* Red buttons are layer persistent toggle keys. + +The keys have multiple symbols: + +* Upper left: standard layer, the letter layer +* Upper right: function layer +* Lower left: navigation layer +* Lower right: symbol layer + +The symbols in the layout editor are not entirely clear. + +The Z and ? keys double as shift keys. Hold for a shift, tap for a Z or ? + +The bottom row from left to right: + +* Tab when pressed, Control when held. It also is the volume mute key when in the "Navigation" layer +* Function layer momentary toggle +* Number layer momentary toggle +* Symbol layer momentary toggle. When in the "Number" layer, this key also makes the "Number" layer sticky for using the 10 key for quite a bit of entry +* Space +* Backspace when tapped, Option when held +* Delete when tapped, Command when held +* Return +* Symbol layer momentary toggle. When in the "Number" layer, key also is the zero key. +* Navigation layer momentary toggle +* Navigation layer toggle. This was included for when you are browsing a website, document or otherwise wish to stay in navigation mode. When in the "Number" layer, the key is the = symbol +* Escape when pressed, Control when held. When in the "Number" layer, the key is the + symbol + +General Notes +------------- + +The letter layer is separated by 2 center rows of keys. This spreads the hands out a little further which helps not twist the wrists as much. The 2 center rows are [], (), [], and Ctrl and Alt keys. + +The symbol layer keys are accessed by the thumbs. They are the closest to the thumbs, instead of the number toggle, because in my code I found I used symbols much more often than numbers. There are two symbol layer keys because the symbols spread across the right and left half of the keyboard. Thus, some symbols are easier hit with the left hand modifier or right hand modifier. + +The number layer key is only accessible by the left thumb because all of the number keys are on the right side of the keyboard. When in the number layer, you can press the key to the right to make that layer sticky when you are going to do a lot of number entry. + +The function layer key is only accessible by the left thumb because all of the function keys are on the right side of the keyboard. + +The navigation layer key is only accessible by the right thumb because all of the navigation keys are on the left side of the keyboard. You can press the key to the right of the navigation layer to make the navigation layer sticky when you are doing a lot of navigation, reading a web page for example. + +When using the number or navigation layers, the same hand that accesses the momentary layer toggle key also has the 4 primary modifiers under their home row. + +* Pointer finger is control +* Middle finger is option +* Ring finger is command +* Pinky finger is shift + +This is so you can easily press Cmd+Shift+F4 or when navigating, select text or words of text by pressing Shift+Control, for example. + +Some keys are duplicated. For example, () are available in easy to reach locations while in the Number layer because they are often used in math. + +The symbol layer has additional helpers for programming including a single keys that enter /=, \*=, -=, +=, !=, <>, ||, and &&. It also includes three special Return keys on the left: + +* Up CR which moves the cursor up, to the end of the line and then presses CR +* Down CR which moves the cursor to the end of the line and then presses CR +* Right ; which moves the cursor to the end of the line and presses ; for C styled languages, such as JavaScript which is a primary language I use + +Word of Warning +--------------- + +I have been using the keymap for some time now and believe it to be a good keymap. There are a few things through the week that I wonder if it would have been better if this key were moved to that location. + +This keymap may change for further optimization. + +Please Give Feedback! +--------------------- + +I am very interested in your feedback. Send me a message here on GitHub, r/jcowgar or @jcowgar. diff --git a/keyboards/planck/out.txt b/keyboards/planck/out.txt deleted file mode 100644 index 644a6a7774b1..000000000000 --- a/keyboards/planck/out.txt +++ /dev/null @@ -1,66 +0,0 @@ --------- begin -------- -avr-gcc.exe (AVR_8_bit_GNU_Toolchain_3.5.0_1662) 4.9.2 -Copyright (C) 2014 Free Software Foundation, Inc. -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -Compiling: ../../keyboards/planck/planck.c [OK] -Compiling: ../../keyboards/planck/keymaps/experimental/keymap.c [WARNINGS] - | - | ../../keyboards/planck/keymaps/experimental/keymap.c: In function 'action_get_macro': - | ../../keyboards/planck/keymaps/experimental/keymap.c:227:17: warning: implicit declaration of function 'breathing_speed_set' [-Wimplicit-function-declaration] - | breathing_speed_set(2); - | ^ - | ../../keyboards/planck/keymaps/experimental/keymap.c:228:17: warning: implicit declaration of function 'breathing_pulse' [-Wimplicit-function-declaration] - | breathing_pulse(); - | ^ - | -Compiling: ../../quantum/quantum.c [OK] -Compiling: ../../quantum/keymap.c [OK] -Compiling: ../../quantum/keycode_config.c [OK] -Compiling: ../../quantum/matrix.c [OK] -Compiling: ../../quantum/audio/audio.c [OK] -Compiling: ../../quantum/audio/voices.c [OK] -Compiling: ../../quantum/audio/luts.c [OK] -Compiling: ../../tmk_core/protocol/lufa/lufa.c [OK] -Compiling: ../../tmk_core/protocol/lufa/descriptor.c [OK] -Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Common/HIDParser.c [OK] -Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.c [OK] -Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.c [OK] -Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.c [OK] -Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.c [OK] -Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/PipeStream_AVR8.c [OK] -Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.c [OK] -Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.c [OK] -Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.c [OK] -Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/ConfigDescriptors.c [OK] -Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/DeviceStandardReq.c [OK] -Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/Events.c [OK] -Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/HostStandardReq.c [OK] -Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/USBTask.c [OK] -Compiling: ../../tmk_core/common/host.c [OK] -Compiling: ../../tmk_core/common/keyboard.c [OK] -Compiling: ../../tmk_core/common/action.c [OK] -Compiling: ../../tmk_core/common/action_tapping.c [OK] -Compiling: ../../tmk_core/common/action_macro.c [OK] -Compiling: ../../tmk_core/common/action_layer.c [OK] -Compiling: ../../tmk_core/common/action_util.c [OK] -Compiling: ../../tmk_core/common/print.c [OK] -Compiling: ../../tmk_core/common/debug.c [OK] -Compiling: ../../tmk_core/common/util.c [OK] -Compiling: ../../tmk_core/common/avr/suspend.c [OK] -Assembling: ../../tmk_core/common/avr/xprintf.S [OK] -Compiling: ../../tmk_core/common/avr/timer.c [OK] -Compiling: ../../tmk_core/common/avr/bootloader.c [OK] -Compiling: ../../tmk_core/common/magic.c [OK] -Compiling: ../../tmk_core/common/avr/eeconfig.c [OK] -Compiling: ../../tmk_core/common/mousekey.c [OK] -Compiling: ../../tmk_core/common/command.c [OK] -Compiling: ../../tmk_core/common/backlight.c [OK] -Linking: .build/planck_experimental.elf [ERRORS] - | - | .build/obj_planck_experimental/keyboards/planck/keymaps/experimental/keymap.o: In function `action_get_macro': - | C:\Users\Fred Wales\Documents\Programming\qmk_firmware\keyboards\planck/../../keyboards/planck/keymaps/experimental/keymap.c:240: undefined reference to `breathing_speed_set' - | C:\Users\Fred Wales\Documents\Programming\qmk_firmware\keyboards\planck/../../keyboards/planck/keymaps/experimental/keymap.c:241: undefined reference to `breathing_pulse' - | collect2.exe: error: ld returned 1 exit status - | diff --git a/keyboards/planck/rules.mk b/keyboards/planck/rules.mk index fb24e823540a..4423d422f6f5 100644 --- a/keyboards/planck/rules.mk +++ b/keyboards/planck/rules.mk @@ -51,17 +51,17 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096 # the appropriate keymap folder that will get included automatically # BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration +COMMAND_ENABLE ?= no # Commands for debug and configuration NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= no # Audio output on port C6 +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +MIDI_ENABLE ?= yes # MIDI controls +AUDIO_ENABLE ?= yes # Audio output on port C6 UNICODE_ENABLE ?= no # Unicode BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. API_SYSEX_ENABLE = yes # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/preonic/config.h b/keyboards/preonic/config.h index f88acf211109..239c29ebf9eb 100644 --- a/keyboards/preonic/config.h +++ b/keyboards/preonic/config.h @@ -37,6 +37,8 @@ along with this program. If not, see . #define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 } #define UNUSED_PINS +#define AUDIO_VOICES + #define BACKLIGHT_PIN B7 /* COL2ROW or ROW2COL */ diff --git a/keyboards/preonic/rules.mk b/keyboards/preonic/rules.mk index 071bfdc7fe7f..62473e3564a9 100644 --- a/keyboards/preonic/rules.mk +++ b/keyboards/preonic/rules.mk @@ -58,12 +58,12 @@ EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) CONSOLE_ENABLE ?= no # Console for debug(+400) COMMAND_ENABLE ?= no # Commands for debug and configuration NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality MIDI_ENABLE ?= yes # MIDI controls AUDIO_ENABLE ?= yes # Audio output on port C6 UNICODE_ENABLE ?= no # Unicode BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. API_SYSEX_ENABLE ?= yes # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/subatomic/keymaps/default/keymap.c b/keyboards/subatomic/keymaps/default/keymap.c new file mode 100644 index 000000000000..628ade9b6162 --- /dev/null +++ b/keyboards/subatomic/keymaps/default/keymap.c @@ -0,0 +1,280 @@ +#include "subatomic.h" +#include "action_layer.h" +#include "eeconfig.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _ADJUST 16 + +enum subatomic_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + BACKLIT +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-------------------------------------------------------------------------------------------------. + * | Ins | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | Del | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | - | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | + * |------+------+------+------+------+------+-------------+------+------+------+------+------+------| + * | = | Esc | A | S | D | F | G | H | J | K | L | ; | " |Enter | + * |------+------+------+------+------+------+------|------+------+------+------+------+------+------| + * | Pg Up| Shift| Z | X | C | V | B | N | M | , | . | / | Home | End | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Pg Dn| Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up | Right| \ | + * `-------------------------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_TRNS, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, KC_TRNS}, + {KC_TRNS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_TRNS}, + {KC_TRNS, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_TRNS}, + {KC_TRNS, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, KC_TRNS}, + {KC_TRNS, BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_TRNS} +}, + +/* Colemak + * ,-------------------------------------------------------------------------------------------------. + * | Ins | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | Del | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | - | Tab | Q | W | F | P | G | J | L | U | Y | ; | [ | ] | + * |------+------+------+------+------+------+-------------+------+------+------+------+------+------| + * | = | Esc | A | R | S | T | D | H | N | E | I | O | " |Enter | + * |------+------+------+------+------+------+------|------+------+------+------+------+------+------| + * | Pg Up| Shift| Z | X | C | V | B | K | M | , | . | / | Home | End | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Pg Dn| Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up | Right| \ | + * `-------------------------------------------------------------------------------------------------' + */ +[_COLEMAK] = { + {KC_TRNS, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, KC_TRNS}, + {KC_TRNS, KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_DEL, KC_TRNS}, + {KC_TRNS, KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_TRNS}, + {KC_TRNS, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, KC_TRNS}, + {KC_TRNS, BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_TRNS} +}, + +/* Dvorak + * ,-------------------------------------------------------------------------------------------------. + * | Ins | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | Del | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | [ | Tab | " | , | . | P | Y | F | G | C | R | L | / | = | + * |------+------+------+------+------+------+-------------+------+------+------+------+------+------| + * | ] | Esc | A | O | E | U | I | D | H | T | N | S | - |Enter | + * |------+------+------+------+------+------+------|------+------+------+------+------+------+------| + * | Pg Up| Shift| ; | Q | J | K | X | B | M | W | V | Z | Home | End | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Pg Dn| Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up | Right| \ | + * `-------------------------------------------------------------------------------------------------' + */ +[_DVORAK] = { + {KC_TRNS, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, KC_TRNS}, + {KC_TRNS, KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_DEL, KC_TRNS}, + {KC_TRNS, KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, KC_TRNS}, + {KC_TRNS, KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT, KC_TRNS}, + {KC_TRNS, BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_TRNS} +}, + +/* Lower + * ,-------------------------------------------------------------------------------------------------. + * | | ~ | F1 | F3 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------+-------------+------+------+------+------+------+------| + * | _ | Tab | ! | @ | # | $ | % | ^ | & | * | ( | ) | { | } | + * |------+------+------+------+------+------+-------------+------+------+------+------+------+------| + * | + | Esc | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------+------|------+------+------+------+------+------+------| + * | | Shift| F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | Next | Vol- | Vol+ | Play | | + * `-------------------------------------------------------------------------------------------------' + */ +[_LOWER] = { + {KC_TRNS, KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, KC_TRNS}, + {KC_TRNS, KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, KC_TRNS}, + {KC_TRNS, KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, KC_TRNS}, + {KC_TRNS, _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______,KC_TRNS}, + {KC_TRNS, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, KC_TRNS} +}, + +/* Raise + * ,-------------------------------------------------------------------------------------------------. + * | | ~ | F1 | F3 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | _ | Tab | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | { | } | + * |------+------+------+------+------+------+-------------+------+------+------+------+------+------| + * | + | Esc | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | | | + * |------+------+------+------+------+------+------|------+------+------+------+------+------+------| + * | | Shift| F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | Next | Vol- | Vol+ | | Play | + * `-------------------------------------------------------------------------------------------------' + */ +[_RAISE] = { + {KC_TRNS, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, KC_TRNS}, + {KC_TRNS, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, KC_TRNS}, + {KC_TRNS, KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_TRNS}, + {KC_TRNS, _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, KC_TRNS}, + {KC_TRNS, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, KC_TRNS} +}, + +/* Adjust (Lower + Raise) + * ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | Reset| | | | | | | | | | | | + * |------+------+------+------+------+------+-------------+------+------+------+------+------+------| + * | | | | |Aud on|AudOff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | | + * |------+------+------+------+------+------+------|------+------+------+------+------+------+------| + * | | |Voice-|Voice+|Mus on|MusOff|MidiOn|MidOff| | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | + * `-------------------------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS}, + {KC_TRNS, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, KC_TRNS}, + {KC_TRNS, _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, KC_TRNS}, + {KC_TRNS, _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______, KC_TRNS}, + {KC_TRNS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_TRNS} +} + + +}; + +#ifdef AUDIO_ENABLE +float tone_startup[][2] = { + {NOTE_B5, 20}, + {NOTE_B6, 8}, + {NOTE_DS6, 20}, + {NOTE_B6, 8} +}; + +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); + +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); +#endif + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + } + return true; +}; + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif diff --git a/keyboards/xd60/Makefile b/keyboards/xd60/Makefile new file mode 100644 index 000000000000..57b2ef62e5f3 --- /dev/null +++ b/keyboards/xd60/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif diff --git a/keyboards/xd60/arrow-cluster.JPG b/keyboards/xd60/arrow-cluster.JPG new file mode 100644 index 000000000000..aa03dc08edc3 Binary files /dev/null and b/keyboards/xd60/arrow-cluster.JPG differ diff --git a/keyboards/xd60/config.h b/keyboards/xd60/config.h new file mode 100644 index 000000000000..13ae29063ed7 --- /dev/null +++ b/keyboards/xd60/config.h @@ -0,0 +1,68 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER XIUDI +#define PRODUCT XD60 +#define DESCRIPTION XD60 Keyboard by XIUDI + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } +#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +#endif diff --git a/keyboards/xd60/keymaps/default/keymap.c b/keyboards/xd60/keymaps/default/keymap.c new file mode 100644 index 000000000000..ea85c02a3980 --- /dev/null +++ b/keyboards/xd60/keymaps/default/keymap.c @@ -0,0 +1,64 @@ +#include "xd60.h" +#include "action_layer.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + // 0: Base Layer + KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT), + + // 1: Function Layer + KEYMAP( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_F14, \ + KC_NO, KC_WH_U, KC_UP, KC_WH_D, KC_BSPC,KC_HOME,KC_CALC,KC_NO, KC_INS, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_DEL, \ + KC_NO, KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL, KC_END, KC_PGDN,KC_NO, KC_NO, KC_NO, KC_HOME, KC_PGUP, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_NO, KC_APP, BL_TOGG,BL_DEC, BL_INC, KC_VOLD,KC_VOLU,KC_MUTE, KC_END, KC_PGDN, KC_RSFT, KC_PGUP, KC_NO, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, F(0), KC_HOME, KC_PGDOWN,KC_END), + +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + // MACRODOWN only works in this function + + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + + return MACRO_NONE; +}; + +void matrix_scan_user(void) { + + // Layer LED indicators + uint32_t layer = layer_state; + + if (layer & (1<<1)) { + xd60_esc_led_on(); + } else { + xd60_esc_led_off(); + } + + /* + if (layer & (1<<2)) { + xd60_poker_leds_on(); + xd60_esc_led_on(); + } else { + xd60_poker_leds_off(); + xd60_esc_led_off(); + } + */ +}; diff --git a/keyboards/xd60/keymaps/default/readme.md b/keyboards/xd60/keymaps/default/readme.md new file mode 100644 index 000000000000..d2a87bd722e5 --- /dev/null +++ b/keyboards/xd60/keymaps/default/readme.md @@ -0,0 +1,9 @@ +# Default Keymap for XIUDI's 60% XD60 PCB + +![Default Keymap for XD60](https://img.alicdn.com/imgextra/i1/1713761720/TB2K0gTalPxQeBjy1XcXXXHzVXa_!!1713761720.png) + +## Additional Notes +Default Keymap for XD60 as indicated on the original sale page. + +## Build +To build the default keymap, simply run `make xd60-default`. diff --git a/keyboards/xd60/keymaps/stanleylai/keymap.c b/keyboards/xd60/keymaps/stanleylai/keymap.c new file mode 100644 index 000000000000..a84ee0f898c9 --- /dev/null +++ b/keyboards/xd60/keymaps/stanleylai/keymap.c @@ -0,0 +1,60 @@ +#include "xd60.h" +#include "action_layer.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + // 0: Base Layer + KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + F(0), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT), + + // 1: Function Layer + KEYMAP( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_F14, \ + KC_CAPS, KC_MPRV, KC_UP, KC_MNXT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, BL_STEP, BL_TOGG, KC_DEL, \ + F(0), KC_LEFT, KC_DOWN, KC_RIGHT,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_VOLD, KC_MUTE, KC_VOLU,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_RSFT, KC_PGUP, KC_INS, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_MPLY, KC_RGUI, KC_RALT, KC_HOME, KC_PGDOWN,KC_END), + +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + // MACRODOWN only works in this function + + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + + return MACRO_NONE; +}; + +void matrix_scan_user(void) { + + // Layer LED indicators + uint32_t layer = layer_state; + + if (layer & (1<<1)) { + xd60_wasd_leds_on(); + xd60_fn_led_on(); + xd60_esc_led_on(); + xd60_poker_leds_on(); + } else { + xd60_wasd_leds_off(); + xd60_fn_led_off(); + xd60_esc_led_off(); + xd60_poker_leds_off(); + } +}; diff --git a/keyboards/xd60/readme.md b/keyboards/xd60/readme.md new file mode 100644 index 000000000000..393ea5d683bf --- /dev/null +++ b/keyboards/xd60/readme.md @@ -0,0 +1,13 @@ +# QMK Firmware for XIUDI's 60% XD60 PCB + +![Top View of XD60 Keyboard, with DSA Dolch keycaps](./top-view.JPG) +![Angled View of XD60 Keyboard Arrow Cluster, with DSA Dolch keycaps](./arrow-cluster.JPG) + +## Quantum MK Firmware +For the full Quantum feature list, see [the parent readme.md](/readme.md). + +## Additional Notes +The XD60 is essentially a GH60 rev. C, with support for a right-hand arrow cluster. Includes full compatibility with GH60 expansion boards. Board also supports in-switch LEDs (two-pin, single colour), as well as WS2182 LED strips for underglow lighting. Default keymap included, matching configuration on sale page. + +## Build +To build the default keymap, simply run `make xd60-default`. diff --git a/keyboards/xd60/rules.mk b/keyboards/xd60/rules.mk new file mode 100644 index 000000000000..e0b92121d2ac --- /dev/null +++ b/keyboards/xd60/rules.mk @@ -0,0 +1,65 @@ +# MCU name +# MCU = at90usb1287 +MCU = atmega32u4 + + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# LUFA specific +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/xd60/top-view.JPG b/keyboards/xd60/top-view.JPG new file mode 100644 index 000000000000..613759b4d28c Binary files /dev/null and b/keyboards/xd60/top-view.JPG differ diff --git a/keyboards/xd60/xd60.c b/keyboards/xd60/xd60.c new file mode 100644 index 000000000000..4307f5f59319 --- /dev/null +++ b/keyboards/xd60/xd60.c @@ -0,0 +1,25 @@ +#include "xd60.h" + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + if (usb_led & (1<> 8; - keymap_data[3 + (i*MATRIX_COLS*2) + (j*2) + 1] = pgm_read_word(&keymaps[data[2]][i][j]) & 0xFF; - } - } - MT_GET_DATA_ACK(DT_KEYMAP, keymap_data, MATRIX_ROWS * MATRIX_COLS * 4 + 3); - // uint8_t keymap_data[5]; - // keymap_data[0] = data[2]; - // keymap_data[1] = data[3]; - // keymap_data[2] = data[4]; - // keymap_data[3] = pgm_read_word(&keymaps[data[2]][data[3]][data[4]]) >> 8; - // keymap_data[4] = pgm_read_word(&keymaps[data[2]][data[3]][data[4]]) & 0xFF; + // This may be too much + // case DT_KEYMAP: { + // uint8_t keymap_data[MATRIX_ROWS * MATRIX_COLS * 4 + 3]; + // keymap_data[0] = data[2]; + // keymap_data[1] = MATRIX_ROWS; + // keymap_data[2] = MATRIX_COLS; + // for (int i = 0; i < MATRIX_ROWS; i++) { + // for (int j = 0; j < MATRIX_COLS; j++) { + // keymap_data[3 + (i*MATRIX_COLS*2) + (j*2)] = pgm_read_word(&keymaps[data[2]][i][j]) >> 8; + // keymap_data[3 + (i*MATRIX_COLS*2) + (j*2) + 1] = pgm_read_word(&keymaps[data[2]][i][j]) & 0xFF; + // } + // } + // MT_GET_DATA_ACK(DT_KEYMAP, keymap_data, MATRIX_ROWS * MATRIX_COLS * 4 + 3); + // // uint8_t keymap_data[5]; + // // keymap_data[0] = data[2]; + // // keymap_data[1] = data[3]; + // // keymap_data[2] = data[4]; + // // keymap_data[3] = pgm_read_word(&keymaps[data[2]][data[3]][data[4]]) >> 8; + // // keymap_data[4] = pgm_read_word(&keymaps[data[2]][data[3]][data[4]]) & 0xFF; - // MT_GET_DATA_ACK(DT_KEYMAP, keymap_data, 5); - break; - } + // // MT_GET_DATA_ACK(DT_KEYMAP, keymap_data, 5); + // break; + // } default: break; } diff --git a/quantum/api/api_sysex.c b/quantum/api/api_sysex.c index a4a554e76453..868f854b928f 100644 --- a/quantum/api/api_sysex.c +++ b/quantum/api/api_sysex.c @@ -1,4 +1,6 @@ #include "api_sysex.h" +#include "sysex_tools.h" +#include "print.h" void send_bytes_sysex(uint8_t message_type, uint8_t data_type, uint8_t * bytes, uint16_t length) { // SEND_STRING("\nTX: "); @@ -6,24 +8,50 @@ void send_bytes_sysex(uint8_t message_type, uint8_t data_type, uint8_t * bytes, // send_byte(bytes[i]); // SEND_STRING(" "); // } - uint8_t * precode = malloc(sizeof(uint8_t) * (length + 2)); - precode[0] = message_type; - precode[1] = data_type; - memcpy(precode + 2, bytes, length); - uint8_t * encoded = malloc(sizeof(uint8_t) * (sysex_encoded_length(length + 2))); - uint16_t encoded_length = sysex_encode(encoded, precode, length + 2); - uint8_t * array = malloc(sizeof(uint8_t) * (encoded_length + 5)); - array[0] = 0xF0; - array[1] = 0x00; - array[2] = 0x00; - array[3] = 0x00; - array[encoded_length + 4] = 0xF7; - memcpy(array + 4, encoded, encoded_length); - midi_send_array(&midi_device, encoded_length + 5, array); + if (length > API_SYSEX_MAX_SIZE) { + xprintf("Sysex msg too big %d %d %d", message_type, data_type, length); + return; + } + + + // The buffer size required is calculated as the following + // API_SYSEX_MAX_SIZE is the maximum length + // In addition to that we have a two byte message header consisting of the message_type and data_type + // This has to be encoded with an additional overhead of one byte for every starting 7 bytes + // We just add one extra byte in case it's not divisible by 7 + // Then we have an unencoded header consisting of 4 bytes + // Plus a one byte terminator + const unsigned message_header = 2; + const unsigned unencoded_message = API_SYSEX_MAX_SIZE + message_header; + const unsigned encoding_overhead = unencoded_message / 7 + 1; + const unsigned encoded_size = unencoded_message + encoding_overhead; + const unsigned unencoded_header = 4; + const unsigned terminator = 1; + const unsigned buffer_size = encoded_size + unencoded_header + terminator; + uint8_t buffer[encoded_size + unencoded_header + terminator]; + // The unencoded header + buffer[0] = 0xF0; + buffer[1] = 0x00; + buffer[2] = 0x00; + buffer[3] = 0x00; + + // We copy the message to the end of the array, this way we can do an inplace encoding, using the same + // buffer for both input and output + const unsigned message_size = length + message_header; + uint8_t* unencoded_start = buffer + buffer_size - message_size; + uint8_t* ptr = unencoded_start; + *(ptr++) = message_type; + *(ptr++) = data_type; + memcpy(ptr, bytes, length); + + unsigned encoded_length = sysex_encode(buffer + unencoded_header, unencoded_start, message_size); + unsigned final_size = unencoded_header + encoded_length + terminator; + buffer[final_size - 1] = 0xF7; + midi_send_array(&midi_device, final_size, buffer); // SEND_STRING("\nTD: "); // for (uint8_t i = 0; i < encoded_length + 5; i++) { - // send_byte(array[i]); + // send_byte(buffer[i]); // SEND_STRING(" "); // } -} \ No newline at end of file +} diff --git a/quantum/audio/audio.c b/quantum/audio/audio.c index ead5fbf3e9e5..2a315fd1688d 100644 --- a/quantum/audio/audio.c +++ b/quantum/audio/audio.c @@ -77,6 +77,7 @@ static bool audio_initialized = false; audio_config_t audio_config; uint16_t envelope_index = 0; +bool glissando = true; void audio_init() { @@ -205,13 +206,17 @@ ISR(TIMER3_COMPA_vect) freq = frequencies[voice_place]; #endif } else { - if (frequency != 0 && frequency < frequencies[voices - 1] && frequency < frequencies[voices - 1] * pow(2, -440/frequencies[voices - 1]/12/2)) { - frequency = frequency * pow(2, 440/frequency/12/2); - } else if (frequency != 0 && frequency > frequencies[voices - 1] && frequency > frequencies[voices - 1] * pow(2, 440/frequencies[voices - 1]/12/2)) { - frequency = frequency * pow(2, -440/frequency/12/2); + if (glissando) { + if (frequency != 0 && frequency < frequencies[voices - 1] && frequency < frequencies[voices - 1] * pow(2, -440/frequencies[voices - 1]/12/2)) { + frequency = frequency * pow(2, 440/frequency/12/2); + } else if (frequency != 0 && frequency > frequencies[voices - 1] && frequency > frequencies[voices - 1] * pow(2, 440/frequencies[voices - 1]/12/2)) { + frequency = frequency * pow(2, -440/frequency/12/2); + } else { + frequency = frequencies[voices - 1]; + } } else { frequency = frequencies[voices - 1]; - } + } #ifdef VIBRATO_ENABLE if (vibrato_strength > 0) { diff --git a/quantum/audio/voices.c b/quantum/audio/voices.c index 19f7b646ef8e..8326e91eaaa0 100644 --- a/quantum/audio/voices.c +++ b/quantum/audio/voices.c @@ -6,6 +6,7 @@ extern uint16_t envelope_index; extern float note_timbre; extern float polyphony_rate; +extern bool glissando; voice_type voice = default_voice; @@ -27,11 +28,15 @@ float voice_envelope(float frequency) { switch (voice) { case default_voice: + glissando = true; note_timbre = TIMBRE_50; polyphony_rate = 0; break; + #ifdef AUDIO_VOICES + case something: + glissando = false; polyphony_rate = 0; switch (compensated_index) { case 0 ... 9: @@ -43,16 +48,102 @@ float voice_envelope(float frequency) { break; case 20 ... 200: - note_timbre = .25 + .125 + pow(((float)compensated_index - 20) / (200 - 20), 2)*.125; + note_timbre = .125 + .125; break; default: - note_timbre = .25; + note_timbre = .125; break; } break; + case drums: + glissando = false; + polyphony_rate = 0; + // switch (compensated_index) { + // case 0 ... 10: + // note_timbre = 0.5; + // break; + // case 11 ... 20: + // note_timbre = 0.5 * (21 - compensated_index) / 10; + // break; + // default: + // note_timbre = 0; + // break; + // } + // frequency = (rand() % (int)(frequency * 1.2 - frequency)) + (frequency * 0.8); + + if (frequency < 80.0) { + + } else if (frequency < 160.0) { + + // Bass drum: 60 - 100 Hz + frequency = (rand() % (int)(40)) + 60; + switch (envelope_index) { + case 0 ... 10: + note_timbre = 0.5; + break; + case 11 ... 20: + note_timbre = 0.5 * (21 - envelope_index) / 10; + break; + default: + note_timbre = 0; + break; + } + + } else if (frequency < 320.0) { + + + // Snare drum: 1 - 2 KHz + frequency = (rand() % (int)(1000)) + 1000; + switch (envelope_index) { + case 0 ... 5: + note_timbre = 0.5; + break; + case 6 ... 20: + note_timbre = 0.5 * (21 - envelope_index) / 15; + break; + default: + note_timbre = 0; + break; + } + + } else if (frequency < 640.0) { + + // Closed Hi-hat: 3 - 5 KHz + frequency = (rand() % (int)(2000)) + 3000; + switch (envelope_index) { + case 0 ... 15: + note_timbre = 0.5; + break; + case 16 ... 20: + note_timbre = 0.5 * (21 - envelope_index) / 5; + break; + default: + note_timbre = 0; + break; + } + + } else if (frequency < 1280.0) { + + // Open Hi-hat: 3 - 5 KHz + frequency = (rand() % (int)(2000)) + 3000; + switch (envelope_index) { + case 0 ... 35: + note_timbre = 0.5; + break; + case 36 ... 50: + note_timbre = 0.5 * (51 - envelope_index) / 15; + break; + default: + note_timbre = 0; + break; + } + + } + break; case butts_fader: + glissando = true; polyphony_rate = 0; switch (compensated_index) { case 0 ... 9: @@ -100,6 +191,7 @@ float voice_envelope(float frequency) { case duty_osc: // This slows the loop down a substantial amount, so higher notes may freeze + glissando = true; polyphony_rate = 0; switch (compensated_index) { default: @@ -114,6 +206,7 @@ float voice_envelope(float frequency) { break; case duty_octave_down: + glissando = true; polyphony_rate = 0; note_timbre = (envelope_index % 2) * .125 + .375 * 2; if ((envelope_index % 4) == 0) @@ -122,6 +215,7 @@ float voice_envelope(float frequency) { note_timbre = 0; break; case delayed_vibrato: + glissando = true; polyphony_rate = 0; note_timbre = TIMBRE_50; #define VOICE_VIBRATO_DELAY 150 @@ -176,11 +270,11 @@ float voice_envelope(float frequency) { // note_timbre = 0.25; // break; + #endif + default: break; } return frequency; } - - diff --git a/quantum/audio/voices.h b/quantum/audio/voices.h index b43def3d7d03..52f7e006d6a1 100644 --- a/quantum/audio/voices.h +++ b/quantum/audio/voices.h @@ -11,7 +11,9 @@ float voice_envelope(float frequency); typedef enum { default_voice, + #ifdef AUDIO_VOICES something, + drums, butts_fader, octave_crunch, duty_osc, @@ -22,6 +24,7 @@ typedef enum { // duty_fourth_down, // duty_third_down, // duty_fifth_third_down, + #endif number_of_voices // important that this is last } voice_type; diff --git a/quantum/config_common.h b/quantum/config_common.h index 17c11faeb617..4bdb2065d944 100644 --- a/quantum/config_common.h +++ b/quantum/config_common.h @@ -80,4 +80,6 @@ # endif #endif +#define API_SYSEX_MAX_SIZE 32 + #endif diff --git a/quantum/keymap.h b/quantum/keymap.h index ae56d16c75eb..c000d2da8ee4 100644 --- a/quantum/keymap.h +++ b/quantum/keymap.h @@ -38,317 +38,16 @@ along with this program. If not, see . #define RESET QK_RESET #endif -/* translates key to keycode */ +#include "quantum_keycodes.h" + +// translates key to keycode uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key); +// translates function id to action +uint16_t keymap_function_id_to_action( uint16_t function_id ); + extern const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS]; extern const uint16_t fn_actions[]; -enum quantum_keycodes { - // Ranges used in shortucuts - not to be used directly - QK_TMK = 0x0000, - QK_TMK_MAX = 0x00FF, - QK_MODS = 0x0100, - QK_LCTL = 0x0100, - QK_LSFT = 0x0200, - QK_LALT = 0x0400, - QK_LGUI = 0x0800, - QK_RCTL = 0x1100, - QK_RSFT = 0x1200, - QK_RALT = 0x1400, - QK_RGUI = 0x1800, - QK_MODS_MAX = 0x1FFF, - QK_FUNCTION = 0x2000, - QK_FUNCTION_MAX = 0x2FFF, - QK_MACRO = 0x3000, - QK_MACRO_MAX = 0x3FFF, - QK_LAYER_TAP = 0x4000, - QK_LAYER_TAP_MAX = 0x4FFF, - QK_TO = 0x5000, - QK_TO_MAX = 0x50FF, - QK_MOMENTARY = 0x5100, - QK_MOMENTARY_MAX = 0x51FF, - QK_DEF_LAYER = 0x5200, - QK_DEF_LAYER_MAX = 0x52FF, - QK_TOGGLE_LAYER = 0x5300, - QK_TOGGLE_LAYER_MAX = 0x53FF, - QK_ONE_SHOT_LAYER = 0x5400, - QK_ONE_SHOT_LAYER_MAX = 0x54FF, - QK_ONE_SHOT_MOD = 0x5500, - QK_ONE_SHOT_MOD_MAX = 0x55FF, -#ifndef DISABLE_CHORDING - QK_CHORDING = 0x5600, - QK_CHORDING_MAX = 0x56FF, -#endif - QK_MOD_TAP = 0x6000, - QK_MOD_TAP_MAX = 0x6FFF, - QK_TAP_DANCE = 0x7100, - QK_TAP_DANCE_MAX = 0x71FF, -#ifdef UNICODEMAP_ENABLE - QK_UNICODE_MAP = 0x7800, - QK_UNICODE_MAP_MAX = 0x7FFF, -#endif -#ifdef UNICODE_ENABLE - QK_UNICODE = 0x8000, - QK_UNICODE_MAX = 0xFFFF, -#endif - - // Loose keycodes - to be used directly - - RESET = 0x7000, - DEBUG, - MAGIC_SWAP_CONTROL_CAPSLOCK, - MAGIC_CAPSLOCK_TO_CONTROL, - MAGIC_SWAP_LALT_LGUI, - MAGIC_SWAP_RALT_RGUI, - MAGIC_NO_GUI, - MAGIC_SWAP_GRAVE_ESC, - MAGIC_SWAP_BACKSLASH_BACKSPACE, - MAGIC_HOST_NKRO, - MAGIC_SWAP_ALT_GUI, - MAGIC_UNSWAP_CONTROL_CAPSLOCK, - MAGIC_UNCAPSLOCK_TO_CONTROL, - MAGIC_UNSWAP_LALT_LGUI, - MAGIC_UNSWAP_RALT_RGUI, - MAGIC_UNNO_GUI, - MAGIC_UNSWAP_GRAVE_ESC, - MAGIC_UNSWAP_BACKSLASH_BACKSPACE, - MAGIC_UNHOST_NKRO, - MAGIC_UNSWAP_ALT_GUI, - MAGIC_TOGGLE_NKRO, - - // Leader key -#ifndef DISABLE_LEADER - KC_LEAD, -#endif - - // Audio on/off/toggle - AU_ON, - AU_OFF, - AU_TOG, - - // Music mode on/off/toggle - MU_ON, - MU_OFF, - MU_TOG, - - // Music voice iterate - MUV_IN, - MUV_DE, - - // Midi mode on/off - MIDI_ON, - MIDI_OFF, - - // Backlight functionality - BL_0, - BL_1, - BL_2, - BL_3, - BL_4, - BL_5, - BL_6, - BL_7, - BL_8, - BL_9, - BL_10, - BL_11, - BL_12, - BL_13, - BL_14, - BL_15, - BL_DEC, - BL_INC, - BL_TOGG, - BL_STEP, - - // RGB functionality - RGB_TOG, - RGB_MOD, - RGB_HUI, - RGB_HUD, - RGB_SAI, - RGB_SAD, - RGB_VAI, - RGB_VAD, - - // Left shift, open paren - KC_LSPO, - - // Right shift, close paren - KC_RSPC, - - // Printing - PRINT_ON, - PRINT_OFF, - - // always leave at the end - SAFE_RANGE -}; - -// Ability to use mods in layouts -#define LCTL(kc) (kc | QK_LCTL) -#define LSFT(kc) (kc | QK_LSFT) -#define LALT(kc) (kc | QK_LALT) -#define LGUI(kc) (kc | QK_LGUI) -#define RCTL(kc) (kc | QK_RCTL) -#define RSFT(kc) (kc | QK_RSFT) -#define RALT(kc) (kc | QK_RALT) -#define RGUI(kc) (kc | QK_RGUI) - -#define HYPR(kc) (kc | QK_LCTL | QK_LSFT | QK_LALT | QK_LGUI) -#define MEH(kc) (kc | QK_LCTL | QK_LSFT | QK_LALT) -#define LCAG(kc) (kc | QK_LCTL | QK_LALT | QK_LGUI) -#define ALTG(kc) (kc | QK_RCTL | QK_RALT) - -#define MOD_HYPR 0xf -#define MOD_MEH 0x7 - - -// Aliases for shifted symbols -// Each key has a 4-letter code, and some have longer aliases too. -// While the long aliases are descriptive, the 4-letter codes -// make for nicer grid layouts (everything lines up), and are -// the preferred style for Quantum. -#define KC_TILD LSFT(KC_GRV) // ~ -#define KC_TILDE KC_TILD - -#define KC_EXLM LSFT(KC_1) // ! -#define KC_EXCLAIM KC_EXLM - -#define KC_AT LSFT(KC_2) // @ - -#define KC_HASH LSFT(KC_3) // # - -#define KC_DLR LSFT(KC_4) // $ -#define KC_DOLLAR KC_DLR - -#define KC_PERC LSFT(KC_5) // % -#define KC_PERCENT KC_PERC - -#define KC_CIRC LSFT(KC_6) // ^ -#define KC_CIRCUMFLEX KC_CIRC - -#define KC_AMPR LSFT(KC_7) // & -#define KC_AMPERSAND KC_AMPR - -#define KC_ASTR LSFT(KC_8) // * -#define KC_ASTERISK KC_ASTR - -#define KC_LPRN LSFT(KC_9) // ( -#define KC_LEFT_PAREN KC_LPRN - -#define KC_RPRN LSFT(KC_0) // ) -#define KC_RIGHT_PAREN KC_RPRN - -#define KC_UNDS LSFT(KC_MINS) // _ -#define KC_UNDERSCORE KC_UNDS - -#define KC_PLUS LSFT(KC_EQL) // + - -#define KC_LCBR LSFT(KC_LBRC) // { -#define KC_LEFT_CURLY_BRACE KC_LCBR - -#define KC_RCBR LSFT(KC_RBRC) // } -#define KC_RIGHT_CURLY_BRACE KC_RCBR - -#define KC_LABK LSFT(KC_COMM) // < -#define KC_LEFT_ANGLE_BRACKET KC_LABK - -#define KC_RABK LSFT(KC_DOT) // > -#define KC_RIGHT_ANGLE_BRACKET KC_RABK - -#define KC_COLN LSFT(KC_SCLN) // : -#define KC_COLON KC_COLN - -#define KC_PIPE LSFT(KC_BSLS) // | - -#define KC_LT LSFT(KC_COMM) // < - -#define KC_GT LSFT(KC_DOT) // > - -#define KC_QUES LSFT(KC_SLSH) // ? -#define KC_QUESTION KC_QUES - -#define KC_DQT LSFT(KC_QUOT) // " -#define KC_DOUBLE_QUOTE KC_DQT -#define KC_DQUO KC_DQT - -#define KC_DELT KC_DELETE // Del key (four letter code) - -// Alias for function layers than expand past FN31 -#define FUNC(kc) (kc | QK_FUNCTION) - -// Aliases -#define S(kc) LSFT(kc) -#define F(kc) FUNC(kc) - -#define M(kc) (kc | QK_MACRO) - -#define MACRODOWN(...) (record->event.pressed ? MACRO(__VA_ARGS__) : MACRO_NONE) - -// L-ayer, T-ap - 256 keycode max, 16 layer max -#define LT(layer, kc) (kc | QK_LAYER_TAP | ((layer & 0xF) << 8)) - -#define AG_SWAP MAGIC_SWAP_ALT_GUI -#define AG_NORM MAGIC_UNSWAP_ALT_GUI - -#define BL_ON BL_9 -#define BL_OFF BL_0 - -#define MI_ON MIDI_ON -#define MI_OFF MIDI_OFF - -// GOTO layer - 16 layers max -// when: -// ON_PRESS = 1 -// ON_RELEASE = 2 -// Unless you have a good reason not to do so, prefer ON_PRESS (1) as your default. -// In fact, we changed it to assume ON_PRESS for sanity/simplicity. If needed, you can add your own -// keycode modeled after the old version, kept below for this. -/* #define TO(layer, when) (layer | QK_TO | (when << 0x4)) */ -#define TO(layer) (layer | QK_TO | (ON_PRESS << 0x4)) - -// Momentary switch layer - 256 layer max -#define MO(layer) (layer | QK_MOMENTARY) - -// Set default layer - 256 layer max -#define DF(layer) (layer | QK_DEF_LAYER) - -// Toggle to layer - 256 layer max -#define TG(layer) (layer | QK_TOGGLE_LAYER) - -// One-shot layer - 256 layer max -#define OSL(layer) (layer | QK_ONE_SHOT_LAYER) - -// One-shot mod -#define OSM(mod) (mod | QK_ONE_SHOT_MOD) - -// M-od, T-ap - 256 keycode max -#define MT(mod, kc) (kc | QK_MOD_TAP | ((mod & 0xF) << 8)) -#define CTL_T(kc) MT(MOD_LCTL, kc) -#define SFT_T(kc) MT(MOD_LSFT, kc) -#define ALT_T(kc) MT(MOD_LALT, kc) -#define GUI_T(kc) MT(MOD_LGUI, kc) -#define C_S_T(kc) MT((MOD_LCTL | MOD_LSFT), kc) // Control + Shift e.g. for gnome-terminal -#define MEH_T(kc) MT((MOD_LCTL | MOD_LSFT | MOD_LALT), kc) // Meh is a less hyper version of the Hyper key -- doesn't include Win or Cmd, so just alt+shift+ctrl -#define LCAG_T(kc) MT((MOD_LCTL | MOD_LALT | MOD_LGUI), kc) // Left control alt and gui -#define ALL_T(kc) MT((MOD_LCTL | MOD_LSFT | MOD_LALT | MOD_LGUI), kc) // see http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/ - -// Dedicated keycode versions for Hyper and Meh, if you want to use them as standalone keys rather than mod-tap -#define KC_HYPR HYPR(KC_NO) -#define KC_MEH MEH(KC_NO) - -#ifdef UNICODE_ENABLE - // For sending unicode codes. - // You may not send codes over 7FFF -- this supports most of UTF8. - // To have a key that sends out Œ, go UC(0x0152) - #define UNICODE(n) (n | QK_UNICODE) - #define UC(n) UNICODE(n) -#endif - -#ifdef UNICODEMAP_ENABLE - #define X(n) (n | QK_UNICODE_MAP) -#endif #endif diff --git a/quantum/keymap_common.c b/quantum/keymap_common.c index 833e5a8f8d9f..eced3d2bba29 100644 --- a/quantum/keymap_common.c +++ b/quantum/keymap_common.c @@ -48,12 +48,10 @@ action_t action_for_key(uint8_t layer, keypos_t key) action_t action; uint8_t action_layer, when, mod; - // The arm-none-eabi compiler generates out of bounds warnings when using the fn_actions directly for some reason - const uint16_t* actions = fn_actions; switch (keycode) { case KC_FN0 ... KC_FN31: - action.code = pgm_read_word(&actions[FN_INDEX(keycode)]); + action.code = keymap_function_id_to_action(FN_INDEX(keycode)); break; case KC_A ... KC_EXSEL: case KC_LCTRL ... KC_RGUI: @@ -79,7 +77,7 @@ action_t action_for_key(uint8_t layer, keypos_t key) case QK_FUNCTION ... QK_FUNCTION_MAX: ; // Is a shortcut for function action_layer, pull last 12bits // This means we have 4,096 FN macros at our disposal - action.code = pgm_read_word(&actions[(int)keycode & 0xFFF]); + action.code = keymap_function_id_to_action( (int)keycode & 0xFFF ); break; case QK_MACRO ... QK_MACRO_MAX: action.code = ACTION_MACRO(keycode & 0xFF); @@ -163,9 +161,17 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { } -/* translates key to keycode */ +// translates key to keycode +__attribute__ ((weak)) uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key) { // Read entire word (16bits) return pgm_read_word(&keymaps[(layer)][(key.row)][(key.col)]); } + +// translates function id to action +__attribute__ ((weak)) +uint16_t keymap_function_id_to_action( uint16_t function_id ) +{ + return pgm_read_word(&fn_actions[function_id]); +} diff --git a/quantum/light_ws2812.h b/quantum/light_ws2812.h index 9498e550e97f..2f78c20fc1cc 100755 --- a/quantum/light_ws2812.h +++ b/quantum/light_ws2812.h @@ -18,13 +18,6 @@ //#include "ws2812_config.h" //#include "i2cmaster.h" -#define LIGHT_I2C 1 -#define LIGHT_I2C_ADDR 0x84 -#define LIGHT_I2C_ADDR_WRITE ( (LIGHT_I2C_ADDR<<1) | I2C_WRITE ) -#define LIGHT_I2C_ADDR_READ ( (LIGHT_I2C_ADDR<<1) | I2C_READ ) - -#define RGBW 1 - #ifdef RGBW #define LED_TYPE struct cRGBW #else diff --git a/quantum/process_keycode/process_music.c b/quantum/process_keycode/process_music.c index bae43943e09c..ca68bef6c87e 100644 --- a/quantum/process_keycode/process_music.c +++ b/quantum/process_keycode/process_music.c @@ -115,7 +115,16 @@ bool process_music(uint16_t keycode, keyrecord_t *record) { return false; } + #ifdef MUSIC_MODE_CHROMATIC + float freq = ((float)220.0)*pow(2.0, -5.0)*pow(2.0,(music_starting_note + record->event.key.col + music_offset)/12.0+(MATRIX_ROWS - record->event.key.row)); + #elif defined(MUSIC_MODE_GUITAR) + float freq = ((float)220.0)*pow(2.0, -5.0)*pow(2.0,(music_starting_note + record->event.key.col + music_offset)/12.0+(float)(MATRIX_ROWS - record->event.key.row + 7)*5.0/12); + #elif defined(MUSIC_MODE_VIOLIN) + float freq = ((float)220.0)*pow(2.0, -5.0)*pow(2.0,(music_starting_note + record->event.key.col + music_offset)/12.0+(float)(MATRIX_ROWS - record->event.key.row + 5)*7.0/12); + #else float freq = ((float)220.0)*pow(2.0, -5.0)*pow(2.0,(music_starting_note + SCALE[record->event.key.col + music_offset])/12.0+(MATRIX_ROWS - record->event.key.row)); + #endif + if (record->event.pressed) { play_note(freq, 0xF); if (music_sequence_recording) { diff --git a/quantum/quantum.c b/quantum/quantum.c index f653564a67de..63ffe2074e78 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -21,6 +21,8 @@ static void do_code16 (uint16_t code, void (*f) (uint8_t)) { if (code & QK_LGUI) f(KC_LGUI); + if (code < QK_RMODS_MIN) return; + if (code & QK_RCTL) f(KC_RCTL); if (code & QK_RSFT) diff --git a/quantum/quantum_keycodes.h b/quantum/quantum_keycodes.h new file mode 100644 index 000000000000..5cd3c8e78058 --- /dev/null +++ b/quantum/quantum_keycodes.h @@ -0,0 +1,313 @@ + +#ifndef QUANTUM_KEYCODES_H +#define QUANTUM_KEYCODES_H + +enum quantum_keycodes { + // Ranges used in shortucuts - not to be used directly + QK_TMK = 0x0000, + QK_TMK_MAX = 0x00FF, + QK_MODS = 0x0100, + QK_LCTL = 0x0100, + QK_LSFT = 0x0200, + QK_LALT = 0x0400, + QK_LGUI = 0x0800, + QK_RMODS_MIN = 0x1000, + QK_RCTL = 0x1100, + QK_RSFT = 0x1200, + QK_RALT = 0x1400, + QK_RGUI = 0x1800, + QK_MODS_MAX = 0x1FFF, + QK_FUNCTION = 0x2000, + QK_FUNCTION_MAX = 0x2FFF, + QK_MACRO = 0x3000, + QK_MACRO_MAX = 0x3FFF, + QK_LAYER_TAP = 0x4000, + QK_LAYER_TAP_MAX = 0x4FFF, + QK_TO = 0x5000, + QK_TO_MAX = 0x50FF, + QK_MOMENTARY = 0x5100, + QK_MOMENTARY_MAX = 0x51FF, + QK_DEF_LAYER = 0x5200, + QK_DEF_LAYER_MAX = 0x52FF, + QK_TOGGLE_LAYER = 0x5300, + QK_TOGGLE_LAYER_MAX = 0x53FF, + QK_ONE_SHOT_LAYER = 0x5400, + QK_ONE_SHOT_LAYER_MAX = 0x54FF, + QK_ONE_SHOT_MOD = 0x5500, + QK_ONE_SHOT_MOD_MAX = 0x55FF, +#ifndef DISABLE_CHORDING + QK_CHORDING = 0x5600, + QK_CHORDING_MAX = 0x56FF, +#endif + QK_MOD_TAP = 0x6000, + QK_MOD_TAP_MAX = 0x6FFF, + QK_TAP_DANCE = 0x7100, + QK_TAP_DANCE_MAX = 0x71FF, +#ifdef UNICODEMAP_ENABLE + QK_UNICODE_MAP = 0x7800, + QK_UNICODE_MAP_MAX = 0x7FFF, +#endif +#ifdef UNICODE_ENABLE + QK_UNICODE = 0x8000, + QK_UNICODE_MAX = 0xFFFF, +#endif + + // Loose keycodes - to be used directly + + RESET = 0x7000, + DEBUG, + MAGIC_SWAP_CONTROL_CAPSLOCK, + MAGIC_CAPSLOCK_TO_CONTROL, + MAGIC_SWAP_LALT_LGUI, + MAGIC_SWAP_RALT_RGUI, + MAGIC_NO_GUI, + MAGIC_SWAP_GRAVE_ESC, + MAGIC_SWAP_BACKSLASH_BACKSPACE, + MAGIC_HOST_NKRO, + MAGIC_SWAP_ALT_GUI, + MAGIC_UNSWAP_CONTROL_CAPSLOCK, + MAGIC_UNCAPSLOCK_TO_CONTROL, + MAGIC_UNSWAP_LALT_LGUI, + MAGIC_UNSWAP_RALT_RGUI, + MAGIC_UNNO_GUI, + MAGIC_UNSWAP_GRAVE_ESC, + MAGIC_UNSWAP_BACKSLASH_BACKSPACE, + MAGIC_UNHOST_NKRO, + MAGIC_UNSWAP_ALT_GUI, + MAGIC_TOGGLE_NKRO, + + // Leader key +#ifndef DISABLE_LEADER + KC_LEAD, +#endif + + // Audio on/off/toggle + AU_ON, + AU_OFF, + AU_TOG, + + // Music mode on/off/toggle + MU_ON, + MU_OFF, + MU_TOG, + + // Music voice iterate + MUV_IN, + MUV_DE, + + // Midi mode on/off + MIDI_ON, + MIDI_OFF, + + // Backlight functionality + BL_0, + BL_1, + BL_2, + BL_3, + BL_4, + BL_5, + BL_6, + BL_7, + BL_8, + BL_9, + BL_10, + BL_11, + BL_12, + BL_13, + BL_14, + BL_15, + BL_DEC, + BL_INC, + BL_TOGG, + BL_STEP, + + // RGB functionality + RGB_TOG, + RGB_MOD, + RGB_HUI, + RGB_HUD, + RGB_SAI, + RGB_SAD, + RGB_VAI, + RGB_VAD, + + // Left shift, open paren + KC_LSPO, + + // Right shift, close paren + KC_RSPC, + + // Printing + PRINT_ON, + PRINT_OFF, + + // always leave at the end + SAFE_RANGE +}; + +// Ability to use mods in layouts +#define LCTL(kc) (kc | QK_LCTL) +#define LSFT(kc) (kc | QK_LSFT) +#define LALT(kc) (kc | QK_LALT) +#define LGUI(kc) (kc | QK_LGUI) +#define RCTL(kc) (kc | QK_RCTL) +#define RSFT(kc) (kc | QK_RSFT) +#define RALT(kc) (kc | QK_RALT) +#define RGUI(kc) (kc | QK_RGUI) + +#define HYPR(kc) (kc | QK_LCTL | QK_LSFT | QK_LALT | QK_LGUI) +#define MEH(kc) (kc | QK_LCTL | QK_LSFT | QK_LALT) +#define LCAG(kc) (kc | QK_LCTL | QK_LALT | QK_LGUI) +#define ALTG(kc) (kc | QK_RCTL | QK_RALT) + +#define MOD_HYPR 0xf +#define MOD_MEH 0x7 + + +// Aliases for shifted symbols +// Each key has a 4-letter code, and some have longer aliases too. +// While the long aliases are descriptive, the 4-letter codes +// make for nicer grid layouts (everything lines up), and are +// the preferred style for Quantum. +#define KC_TILD LSFT(KC_GRV) // ~ +#define KC_TILDE KC_TILD + +#define KC_EXLM LSFT(KC_1) // ! +#define KC_EXCLAIM KC_EXLM + +#define KC_AT LSFT(KC_2) // @ + +#define KC_HASH LSFT(KC_3) // # + +#define KC_DLR LSFT(KC_4) // $ +#define KC_DOLLAR KC_DLR + +#define KC_PERC LSFT(KC_5) // % +#define KC_PERCENT KC_PERC + +#define KC_CIRC LSFT(KC_6) // ^ +#define KC_CIRCUMFLEX KC_CIRC + +#define KC_AMPR LSFT(KC_7) // & +#define KC_AMPERSAND KC_AMPR + +#define KC_ASTR LSFT(KC_8) // * +#define KC_ASTERISK KC_ASTR + +#define KC_LPRN LSFT(KC_9) // ( +#define KC_LEFT_PAREN KC_LPRN + +#define KC_RPRN LSFT(KC_0) // ) +#define KC_RIGHT_PAREN KC_RPRN + +#define KC_UNDS LSFT(KC_MINS) // _ +#define KC_UNDERSCORE KC_UNDS + +#define KC_PLUS LSFT(KC_EQL) // + + +#define KC_LCBR LSFT(KC_LBRC) // { +#define KC_LEFT_CURLY_BRACE KC_LCBR + +#define KC_RCBR LSFT(KC_RBRC) // } +#define KC_RIGHT_CURLY_BRACE KC_RCBR + +#define KC_LABK LSFT(KC_COMM) // < +#define KC_LEFT_ANGLE_BRACKET KC_LABK + +#define KC_RABK LSFT(KC_DOT) // > +#define KC_RIGHT_ANGLE_BRACKET KC_RABK + +#define KC_COLN LSFT(KC_SCLN) // : +#define KC_COLON KC_COLN + +#define KC_PIPE LSFT(KC_BSLS) // | + +#define KC_LT LSFT(KC_COMM) // < + +#define KC_GT LSFT(KC_DOT) // > + +#define KC_QUES LSFT(KC_SLSH) // ? +#define KC_QUESTION KC_QUES + +#define KC_DQT LSFT(KC_QUOT) // " +#define KC_DOUBLE_QUOTE KC_DQT +#define KC_DQUO KC_DQT + +#define KC_DELT KC_DELETE // Del key (four letter code) + +// Alias for function layers than expand past FN31 +#define FUNC(kc) (kc | QK_FUNCTION) + +// Aliases +#define S(kc) LSFT(kc) +#define F(kc) FUNC(kc) + +#define M(kc) (kc | QK_MACRO) + +#define MACRODOWN(...) (record->event.pressed ? MACRO(__VA_ARGS__) : MACRO_NONE) + +// L-ayer, T-ap - 256 keycode max, 16 layer max +#define LT(layer, kc) (kc | QK_LAYER_TAP | ((layer & 0xF) << 8)) + +#define AG_SWAP MAGIC_SWAP_ALT_GUI +#define AG_NORM MAGIC_UNSWAP_ALT_GUI + +#define BL_ON BL_9 +#define BL_OFF BL_0 + +#define MI_ON MIDI_ON +#define MI_OFF MIDI_OFF + +// GOTO layer - 16 layers max +// when: +// ON_PRESS = 1 +// ON_RELEASE = 2 +// Unless you have a good reason not to do so, prefer ON_PRESS (1) as your default. +// In fact, we changed it to assume ON_PRESS for sanity/simplicity. If needed, you can add your own +// keycode modeled after the old version, kept below for this. +/* #define TO(layer, when) (layer | QK_TO | (when << 0x4)) */ +#define TO(layer) (layer | QK_TO | (ON_PRESS << 0x4)) + +// Momentary switch layer - 256 layer max +#define MO(layer) (layer | QK_MOMENTARY) + +// Set default layer - 256 layer max +#define DF(layer) (layer | QK_DEF_LAYER) + +// Toggle to layer - 256 layer max +#define TG(layer) (layer | QK_TOGGLE_LAYER) + +// One-shot layer - 256 layer max +#define OSL(layer) (layer | QK_ONE_SHOT_LAYER) + +// One-shot mod +#define OSM(mod) (mod | QK_ONE_SHOT_MOD) + +// M-od, T-ap - 256 keycode max +#define MT(mod, kc) (kc | QK_MOD_TAP | ((mod & 0xF) << 8)) +#define CTL_T(kc) MT(MOD_LCTL, kc) +#define SFT_T(kc) MT(MOD_LSFT, kc) +#define ALT_T(kc) MT(MOD_LALT, kc) +#define GUI_T(kc) MT(MOD_LGUI, kc) +#define C_S_T(kc) MT((MOD_LCTL | MOD_LSFT), kc) // Control + Shift e.g. for gnome-terminal +#define MEH_T(kc) MT((MOD_LCTL | MOD_LSFT | MOD_LALT), kc) // Meh is a less hyper version of the Hyper key -- doesn't include Win or Cmd, so just alt+shift+ctrl +#define LCAG_T(kc) MT((MOD_LCTL | MOD_LALT | MOD_LGUI), kc) // Left control alt and gui +#define ALL_T(kc) MT((MOD_LCTL | MOD_LSFT | MOD_LALT | MOD_LGUI), kc) // see http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/ + +// Dedicated keycode versions for Hyper and Meh, if you want to use them as standalone keys rather than mod-tap +#define KC_HYPR HYPR(KC_NO) +#define KC_MEH MEH(KC_NO) + +#ifdef UNICODE_ENABLE + // For sending unicode codes. + // You may not send codes over 7FFF -- this supports most of UTF8. + // To have a key that sends out Œ, go UC(0x0152) + #define UNICODE(n) (n | QK_UNICODE) + #define UC(n) UNICODE(n) +#endif + +#ifdef UNICODEMAP_ENABLE + #define X(n) (n | QK_UNICODE_MAP) +#endif + +#endif // QUANTUM_KEYCODES_H diff --git a/quantum/rgblight.c b/quantum/rgblight.c index 625971e0fe61..52a09817a1e4 100644 --- a/quantum/rgblight.c +++ b/quantum/rgblight.c @@ -370,6 +370,7 @@ void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b) { rgblight_set(); } +__attribute__ ((weak)) void rgblight_set(void) { if (rgblight_config.enable) { #ifdef RGBW @@ -449,6 +450,9 @@ void rgblight_task(void) { } else if (rgblight_config.mode >= 21 && rgblight_config.mode <= 23) { // mode = 21 to 23, knight mode rgblight_effect_knight(rgblight_config.mode - 21); + } else { + // mode = 24, christmas mode + rgblight_effect_christmas(); } } } @@ -594,4 +598,22 @@ void rgblight_effect_knight(uint8_t interval) { } } + +void rgblight_effect_christmas(void) { + static uint16_t current_offset = 0; + static uint16_t last_timer = 0; + uint16_t hue; + uint8_t i; + if (timer_elapsed(last_timer) < 1000) { + return; + } + last_timer = timer_read(); + current_offset = (current_offset + 1) % 2; + for (i = 0; i < RGBLED_NUM; i++) { + hue = 0 + ((RGBLED_NUM * (i + current_offset)) % 2) * 80; + sethsv(hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i]); + } + rgblight_set(); +} + #endif diff --git a/quantum/rgblight.h b/quantum/rgblight.h index aa1d026e0e6e..726b8de72e4c 100644 --- a/quantum/rgblight.h +++ b/quantum/rgblight.h @@ -2,7 +2,7 @@ #define RGBLIGHT_H #ifdef RGBLIGHT_ANIMATIONS - #define RGBLIGHT_MODES 23 + #define RGBLIGHT_MODES 24 #else #define RGBLIGHT_MODES 1 #endif @@ -40,6 +40,8 @@ #include "eeconfig.h" #include "light_ws2812.h" +extern LED_TYPE led[RGBLED_NUM]; + extern const uint8_t RGBLED_BREATHING_INTERVALS[4] PROGMEM; extern const uint8_t RGBLED_RAINBOW_MOOD_INTERVALS[3] PROGMEM; extern const uint8_t RGBLED_RAINBOW_SWIRL_INTERVALS[3] PROGMEM; @@ -98,5 +100,6 @@ void rgblight_effect_rainbow_mood(uint8_t interval); void rgblight_effect_rainbow_swirl(uint8_t interval); void rgblight_effect_snake(uint8_t interval); void rgblight_effect_knight(uint8_t interval); +void rgblight_effect_christmas(void); #endif diff --git a/tmk_core/common/keycode.h b/tmk_core/common/keycode.h index 2f208c54e046..54e9c322c1df 100644 --- a/tmk_core/common/keycode.h +++ b/tmk_core/common/keycode.h @@ -85,7 +85,7 @@ along with this program. If not, see . #define KC_LCAP KC_LOCKING_CAPS #define KC_LNUM KC_LOCKING_NUM #define KC_LSCR KC_LOCKING_SCROLL -#define KC_ERAS KC_ALT_ERASE, +#define KC_ERAS KC_ALT_ERASE #define KC_CLR KC_CLEAR /* Japanese specific */ #define KC_ZKHK KC_GRAVE diff --git a/tmk_core/protocol/lufa/descriptor.c b/tmk_core/protocol/lufa/descriptor.c index 14d99b50bd77..feeea76df095 100644 --- a/tmk_core/protocol/lufa/descriptor.c +++ b/tmk_core/protocol/lufa/descriptor.c @@ -143,10 +143,10 @@ const USB_Descriptor_HIDReport_Datatype_t PROGMEM ExtrakeyReport[] = HID_RI_USAGE(8, 0x80), /* System Control */ HID_RI_COLLECTION(8, 0x01), /* Application */ HID_RI_REPORT_ID(8, REPORT_ID_SYSTEM), - HID_RI_LOGICAL_MINIMUM(16, 0x0081), - HID_RI_LOGICAL_MAXIMUM(16, 0x00B7), + HID_RI_LOGICAL_MINIMUM(16, 0x0001), + HID_RI_LOGICAL_MAXIMUM(16, 0x0003), HID_RI_USAGE_MINIMUM(16, 0x0081), /* System Power Down */ - HID_RI_USAGE_MAXIMUM(16, 0x00B7), /* System Display LCD Autoscale */ + HID_RI_USAGE_MAXIMUM(16, 0x0083), /* System Wake Up */ HID_RI_REPORT_SIZE(8, 16), HID_RI_REPORT_COUNT(8, 1), HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_ARRAY | HID_IOF_ABSOLUTE), diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index dd78fe6213bc..6dd5959dc4ac 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -732,7 +732,7 @@ static void send_system(uint16_t data) report_extra_t r = { .report_id = REPORT_ID_SYSTEM, - .usage = data + .usage = data - SYSTEM_POWER_DOWN + 1 }; Endpoint_SelectEndpoint(EXTRAKEY_IN_EPNUM); @@ -1252,28 +1252,40 @@ void cc_callback(MidiDevice * device, // midi_send_cc(device, (chan + 1) % 16, num, val); } +#ifdef API_SYSEX_ENABLE uint8_t midi_buffer[MIDI_SYSEX_BUFFER] = {0}; +#endif void sysex_callback(MidiDevice * device, uint16_t start, uint8_t length, uint8_t * data) { #ifdef API_SYSEX_ENABLE // SEND_STRING("\n"); // send_word(start); // SEND_STRING(": "); + // Don't store the header + int16_t pos = start - 4; for (uint8_t place = 0; place < length; place++) { // send_byte(*data); - midi_buffer[start + place] = *data; - if (*data == 0xF7) { - // SEND_STRING("\nRD: "); - // for (uint8_t i = 0; i < start + place + 1; i++){ - // send_byte(midi_buffer[i]); - // SEND_STRING(" "); - // } - uint8_t * decoded = malloc(sizeof(uint8_t) * (sysex_decoded_length(start + place - 4))); - uint16_t decode_length = sysex_decode(decoded, midi_buffer + 4, start + place - 4); - process_api(decode_length, decoded); + if (pos >= 0) { + if (*data == 0xF7) { + // SEND_STRING("\nRD: "); + // for (uint8_t i = 0; i < start + place + 1; i++){ + // send_byte(midi_buffer[i]); + // SEND_STRING(" "); + // } + const unsigned decoded_length = sysex_decoded_length(pos); + uint8_t decoded[API_SYSEX_MAX_SIZE]; + sysex_decode(decoded, midi_buffer, pos); + process_api(decoded_length, decoded); + return; + } + else if (pos >= MIDI_SYSEX_BUFFER) { + return; + } + midi_buffer[pos] = *data; } // SEND_STRING(" "); data++; + pos++; } #endif } diff --git a/tmk_core/protocol/lufa/lufa.h b/tmk_core/protocol/lufa/lufa.h index b11854101d4e..a049fd43c910 100644 --- a/tmk_core/protocol/lufa/lufa.h +++ b/tmk_core/protocol/lufa/lufa.h @@ -70,7 +70,6 @@ typedef struct { #ifdef MIDI_ENABLE void MIDI_Task(void); MidiDevice midi_device; - #define MIDI_SYSEX_BUFFER 32 #endif #ifdef API_ENABLE @@ -79,6 +78,9 @@ typedef struct { #ifdef API_SYSEX_ENABLE #include "api_sysex.h" + // Allocate space for encoding overhead. + //The header and terminator are not stored to save a few bytes of precious ram + #define MIDI_SYSEX_BUFFER (API_SYSEX_MAX_SIZE + API_SYSEX_MAX_SIZE / 7 + (API_SYSEX_MAX_SIZE % 7 ? 1 : 0)) #endif // #if LUFA_VERSION_INTEGER < 0x120730