From 9414be3cc1ed0885232b107fecf82a28f4ef5bc3 Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Sun, 29 Nov 2020 10:28:03 -0600 Subject: [PATCH] Configurable serial usart timeout (#11057) --- docs/serial_driver.md | 1 + drivers/chibios/serial_usart.c | 13 ++++++++----- 2 files changed, 9 insertions(+), 5 deletions(-) diff --git a/docs/serial_driver.md b/docs/serial_driver.md index bc376b6ddda7..c98f4c117631 100644 --- a/docs/serial_driver.md +++ b/docs/serial_driver.md @@ -60,6 +60,7 @@ Configure the hardware via your config.h: // 5: about 19200 baud #define SERIAL_USART_DRIVER SD1 // USART driver of TX pin. default: SD1 #define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 +#define SERIAL_USART_TIMEOUT 100 // USART driver timeout. default 100 ``` You must also enable the ChibiOS `SERIAL` feature: diff --git a/drivers/chibios/serial_usart.c b/drivers/chibios/serial_usart.c index 62b4913cbfbb..72fcaed0c7cb 100644 --- a/drivers/chibios/serial_usart.c +++ b/drivers/chibios/serial_usart.c @@ -58,7 +58,10 @@ # error invalid SELECT_SOFT_SERIAL_SPEED value #endif -#define TIMEOUT 100 +#ifndef SERIAL_USART_TIMEOUT +# define SERIAL_USART_TIMEOUT 100 +#endif + #define HANDSHAKE_MAGIC 7 static inline msg_t sdWriteHalfDuplex(SerialDriver* driver, uint8_t* data, uint8_t size) { @@ -201,21 +204,21 @@ int soft_serial_transaction(int index) { sdClear(&SERIAL_USART_DRIVER); // First chunk is always transaction id - sdWriteTimeout(&SERIAL_USART_DRIVER, &sstd_index, sizeof(sstd_index), TIME_MS2I(TIMEOUT)); + sdWriteTimeout(&SERIAL_USART_DRIVER, &sstd_index, sizeof(sstd_index), TIME_MS2I(SERIAL_USART_TIMEOUT)); uint8_t sstd_index_shake = 0xFF; // Which we always read back first so that we can error out correctly // - due to the half duplex limitations on return codes, we always have to read *something* // - without the read, write only transactions *always* succeed, even during the boot process where the slave is not ready - res = sdReadTimeout(&SERIAL_USART_DRIVER, &sstd_index_shake, sizeof(sstd_index_shake), TIME_MS2I(TIMEOUT)); + res = sdReadTimeout(&SERIAL_USART_DRIVER, &sstd_index_shake, sizeof(sstd_index_shake), TIME_MS2I(SERIAL_USART_TIMEOUT)); if (res < 0 || (sstd_index_shake != (sstd_index ^ HANDSHAKE_MAGIC))) { dprintf("serial::usart_shake NO_RESPONSE\n"); return TRANSACTION_NO_RESPONSE; } if (trans->initiator2target_buffer_size) { - res = sdWriteTimeout(&SERIAL_USART_DRIVER, trans->initiator2target_buffer, trans->initiator2target_buffer_size, TIME_MS2I(TIMEOUT)); + res = sdWriteTimeout(&SERIAL_USART_DRIVER, trans->initiator2target_buffer, trans->initiator2target_buffer_size, TIME_MS2I(SERIAL_USART_TIMEOUT)); if (res < 0) { dprintf("serial::usart_transmit NO_RESPONSE\n"); return TRANSACTION_NO_RESPONSE; @@ -223,7 +226,7 @@ int soft_serial_transaction(int index) { } if (trans->target2initiator_buffer_size) { - res = sdReadTimeout(&SERIAL_USART_DRIVER, trans->target2initiator_buffer, trans->target2initiator_buffer_size, TIME_MS2I(TIMEOUT)); + res = sdReadTimeout(&SERIAL_USART_DRIVER, trans->target2initiator_buffer, trans->target2initiator_buffer_size, TIME_MS2I(SERIAL_USART_TIMEOUT)); if (res < 0) { dprintf("serial::usart_receive NO_RESPONSE\n"); return TRANSACTION_NO_RESPONSE;