RabbitMQ 3.13.0-rc.2

[michaelklishin]

RabbitMQ 3.13.0-rc.2

RabbitMQ 3.13.0-rc.2 is a candidate of a new feature release.

Highlights

This release includes several new features and optimizations.

The user-facing areas that have seen the biggest improvements in this release are

• Khepri now can be used as an alternative schema data store
  in RabbitMQ, replacing Mnesia
• Support for consumer-side stream filtering
• MQTTv5 support
• A new common message container format used internally, based on the AMQP 1.0 message container format
• Improved classic non-mirrored queue performance with message sizes larger than
  4 KiB (or a different customized CQ index embedding threshold)
• Classic queues use version 2 of the storage implementation (CQv2).
  This should significantly improve performance of non-mirrored classic queues

See Compatibility Notes below to learn about breaking or potentially breaking changes in this release.

Release Artifacts

RabbitMQ preview releases are distributed via GitHub.

Community Docker image is another installation option
for previews. It is updated with a delay (usually a few days).

Erlang/OTP Compatibility Notes

This release requires Erlang 26.0 or later.

Provisioning Latest Erlang Releases explains
what package repositories and tools can be used to provision latest patch versions of Erlang 26.x.

Upgrading to 3.13

Documentation guides on upgrades

See the Upgrading guide for documentation on upgrades and RabbitMQ change log
for release notes of other releases.

Note that since 3.12.0 requires all feature flags to be enabled before upgrading,
there is no upgrade path from from 3.11.24 (or a later patch release) straight to 3.13.0.

Required Feature Flags

This release does not graduate any feature flags.

However, all users are highly encouraged to enable all feature flags before upgrading to this release from
3.12.x.

Mixed version cluster compatibility

RabbitMQ 3.13.0 nodes can run alongside 3.12.x nodes. 3.13.x-specific features can only be made available when all nodes in the cluster
upgrade to 3.13.0 or a later patch release in the new series.

While operating in mixed version mode, some aspects of the system may not behave as expected. The list of known behavior changes is covered below.
Once all nodes are upgraded to 3.13.0, these irregularities will go away.

Mixed version clusters are a mechanism that allows rolling upgrade and are not meant to be run for extended
periods of time (no more than a few hours).

Compatibility Notes

This release includes a few potentially breaking changes&

Minimum Supported Erlang Version

Starting with this release, RabbitMQ requires Erlang 26.0 or later versions. Nodes will fail to start
on older Erlang releases.

Client Library Compatibility

Client libraries that were compatible with RabbitMQ 3.12.x will be compatible with 3.13.0.
RabbitMQ Stream Protocol clients must be upgraded to use the stream filtering feature
introduced in this release.

Management Plugin and HTTP API

GET /api/queues` HTTP API endpoint has dropped several rarely used metrics, resulting in 25% in traffic saving.

MQTT Plugin

mqtt.subscription_ttl (in milliseconds) configuration setting was replaced with mqtt.max_session_expiry_interval_seconds (in seconds).
A 3.13 RabbitMQ node will fail to boot if the old configuration setting is set.
For example, if you set mqtt.subscription_ttl = 3600000 (1 hour) prior to 3.13, replace that setting with mqtt.max_session_expiry_interval_seconds = 3600 (1 hour) in 3.13.

openSUSE Leap Package is not Provided

An openSUSE Leap package will not be provided with this release of RabbitMQ.

This release requires Erlang 26 and there is an Erlang 26 package available from Erlang Factory
but the package depends on glibc 2.34, and all currently available openSUSE Leap releases
(up to 15.5) ship with 2.31 at most.

Team RabbitMQ would like to continue building a openSUSE Leap package when a Leap 15.5-compatible Erlang 26
package becomes publicly available.

Getting Help

Any questions about this release, upgrades or RabbitMQ in general are welcome in GitHub Discussions or
on our community Discord.

Changes Worth Mentioning

Release notes are kept under rabbitmq-server/release-notes.

Core Server

Enhancements

• Khepri now can be used as an alternative schema data store
  in RabbitMQ, by enabling a feature flag:

  rabbitmqctl enable_feature_flag khepri_db

  In practical terms this means that it will be possible to swap Mnesia for a Raft-based data store
  that will predictably recover from network partitions and node failures, the same way quorum queues
  and streams already do. At the same time, this means
  that RabbitMQ clusters now must have a majority of nodes online at all times, or all client operations will be refused.

  Like quorum queues and streams, Khepri uses RabbitMQ's Raft implementation under the hood. With Khepri enabled, all key modern features
  of RabbitMQ will use the same fundamental approach to recovery from failures, relying on a library that passes a Jepsen test suite.

  Team RabbitMQ intends to make Khepri the default schema database starting with RabbitMQ 4.0.

  GitHub issue: #7206

• Messages are now internally stored using a new common heavily AMQP 1.0-influenced container format. This is a major step towards a protocol-agnostic core:
  a common format that encapsulates a sum of data types used by the protocols RabbitMQ supports, plus annotations for routng, dead-lettering state,
  and other purposes.

  AMQP 1.0, AMQP 0-9-1, MQTT and STOMP have or will adopt this internal representation in upcoming releases. RabbitMQ Stream protocol already uses the AMQP 1.0 message container
  structure internally.

  This common internal format will allow for more correct and potentially efficient multi-protocol support in RabbitMQ,
  and that most cross-protocol translation rough edges can be smoothened.

  GitHub issue: #5077

• Target quorum queue replica state is now continuously reconciled.

  When the number of online replicas of a quorum queue goes below (or above) its target,
  new replicas will be automatically placed if enough cluster nodes are available.
  This is a more automatic version of how quorum queue replicas have originally been grown.

  For automatic shrinking of queue replicas, the user must opt in.

  Contributed by @SimonUnge (AWS).

  GitHub issue: #8218

• Reduced memory footprint, improved memory use predictability and throughput of classic queues (version 2, or CQv2).
  This particularly benefits classic queues with longer backlogs.

  Classic queue v2 (CQv2) storage implementation is now the default. It is possible to switch
  the default back to CQv1 using rabbitmq.conf:

  # uses CQv1 by default
  classic_queue.default_version = 1

  Individual queues can be declared by passing x-queue-version argument and/or through a queue-version policy.

  GitHub issue: #8308

• Non-mirrored classic queues: optimizations of storage for larger (greater than 4 kiB) messages.

  GitHub issue: #6090, #8507

• A subsystem for marking features as deprecated.

  GitHub issue: #7390

• Plugins now can register custom queue types. This means that a plugin now can provide
  a custom queue type.

  Contributed by @luos (Erlang Solutions).

  GitHub issues: #8834, #8927

Bug Fixes

This release includes all bug fixes shipped in the 3.12.x series.

• Feature flag discovery on a newly added node could discover an incomplete inventory of feature flags.

  GitHub issue: #8477

• Feature flag discovery operations will now be retried multiple times in case of network failures.

  GitHub issue: #8491

• The state of node maintenance status across the cluster is now replicated. It previously was accessible
  to all nodes but not replicated.

  GitHub issue: #9005

Management Plugin

Enhancements

• New API endpoint, GET /api/stream/{vhost}/{name}/tracking, can be used to track
  publisher and consumer offsets in a stream.

  GitHub issue: #9642

• Several rarely used queue metrics were removed to reduce inter-node data transfers
  and CPU burn during API response generation. The effects will be particularly pronounced
  for the GET /api/queues endpoint used without filtering or pagination, which can produce
  enormously large responses.

  A couple of relevant queue metrics or state fields were lifted to the top level.

  This is a potentially breaking change.

  Note that Prometheus is the recommended option for monitoring,
  not the management plugin's HTTP API.

  GitHub issues: #9437, #9578, #9633

Stream Plugin

Enhancements

• Support for (consumer) stream filtering.

  This allows consumers that are only interested in a subset of data in a stream to receive
  less data. Note that false positives are possible, so this feature should be accompanied by
  client library or application-level filtering.

  GitHub issue: #8207

MQTT Plugin

Enhancements

• Support for MQTTv5 (with limitations).

  GitHub issues: #7263, #8681

• Negative message acknowledgements are now propagated to MQTTv5 clients.

  GitHub issue: #9034

• Potential incompatibility: mqtt.subscription_ttl configuration was replaced with
  mqtt.max_session_expiry_interval_seconds that targets MQTTv5.

  GitHub issue: #8846

AMQP 1.0 Plugin

Bug Fixes

• During AMQP 1.0 to AMQP 0-9-1 conversion, the Correlation ID message property is now stored as x-correlation-id (instead of x-correlation) for values longer than 255 bytes.

  This is a potentially breaking change.

  GitHub issue: #8680

Dependency Changes

• ra was upgraded to 2.7.0
• osiris was upgraded to 1.6.9

Source Code Archives

To obtain source code of the entire distribution, please download the archive named rabbitmq-server-3.13.0.tar.xz
instead of the source tarball produced by GitHub.

---

This discussion was created from the release RabbitMQ 3.13.0-rc.2.