diff --git a/Documentation/networking/e100.rst b/Documentation/networking/e100.rst
index d4d8370279254..9708f5fa76de2 100644
--- a/Documentation/networking/e100.rst
+++ b/Documentation/networking/e100.rst
@@ -1,3 +1,4 @@
+==============================================================
 Linux* Base Driver for the Intel(R) PRO/100 Family of Adapters
 ==============================================================
 
@@ -86,83 +87,84 @@ Event Log Message Level:  The driver uses the message level flag to log events
 Additional Configurations
 =========================
 
-  Configuring the Driver on Different Distributions
-  -------------------------------------------------
+Configuring the Driver on Different Distributions
+-------------------------------------------------
 
-  Configuring a network driver to load properly when the system is started is
-  distribution dependent. Typically, the configuration process involves adding
-  an alias line to /etc/modprobe.d/*.conf as well as editing other system
-  startup scripts and/or configuration files.  Many popular Linux
-  distributions ship with tools to make these changes for you. To learn the
-  proper way to configure a network device for your system, refer to your
-  distribution documentation.  If during this process you are asked for the
-  driver or module name, the name for the Linux Base Driver for the Intel
-  PRO/100 Family of Adapters is e100.
+Configuring a network driver to load properly when the system is started
+is distribution dependent.  Typically, the configuration process involves
+adding an alias line to /etc/modprobe.d/*.conf as well as editing other
+system startup scripts and/or configuration files.  Many popular Linux
+distributions ship with tools to make these changes for you.  To learn
+the proper way to configure a network device for your system, refer to
+your distribution documentation.  If during this process you are asked
+for the driver or module name, the name for the Linux Base Driver for
+the Intel PRO/100 Family of Adapters is e100.
 
-  As an example, if you install the e100 driver for two PRO/100 adapters
-  (eth0 and eth1), add the following to a configuration file in /etc/modprobe.d/
+As an example, if you install the e100 driver for two PRO/100 adapters
+(eth0 and eth1), add the following to a configuration file in
+/etc/modprobe.d/::
 
        alias eth0 e100
        alias eth1 e100
 
-  Viewing Link Messages
-  ---------------------
-  In order to see link messages and other Intel driver information on your
-  console, you must set the dmesg level up to six. This can be done by
-  entering the following on the command line before loading the e100 driver::
-
-       dmesg -n 6
+Viewing Link Messages
+---------------------
 
-  If you wish to see all messages issued by the driver, including debug
-  messages, set the dmesg level to eight.
+In order to see link messages and other Intel driver information on your
+console, you must set the dmesg level up to six.  This can be done by
+entering the following on the command line before loading the e100
+driver::
 
-  NOTE: This setting is not saved across reboots.
+       dmesg -n 6
 
+If you wish to see all messages issued by the driver, including debug
+messages, set the dmesg level to eight.
 
-  ethtool
-  -------
+NOTE: This setting is not saved across reboots.
 
-  The driver utilizes the ethtool interface for driver configuration and
-  diagnostics, as well as displaying statistical information.  The ethtool
-  version 1.6 or later is required for this functionality.
+ethtool
+-------
 
-  The latest release of ethtool can be found from
-  https://www.kernel.org/pub/software/network/ethtool/
+The driver utilizes the ethtool interface for driver configuration and
+diagnostics, as well as displaying statistical information.  The ethtool
+version 1.6 or later is required for this functionality.
 
-  Enabling Wake on LAN* (WoL)
-  ---------------------------
-  WoL is provided through the ethtool* utility.  For instructions on enabling
-  WoL with ethtool, refer to the ethtool man page.
+The latest release of ethtool can be found from
+https://www.kernel.org/pub/software/network/ethtool/
 
-  WoL will be enabled on the system during the next shut down or reboot. For
-  this driver version, in order to enable WoL, the e100 driver must be
-  loaded when shutting down or rebooting the system.
+Enabling Wake on LAN* (WoL)
+---------------------------
+WoL is provided through the ethtool* utility.  For instructions on
+enabling WoL with ethtool, refer to the ethtool man page.  WoL will be
+enabled on the system during the next shut down or reboot.  For this
+driver version, in order to enable WoL, the e100 driver must be loaded
+when shutting down or rebooting the system.
 
-  NAPI
-  ----
+NAPI
+----
 
-  NAPI (Rx polling mode) is supported in the e100 driver.
+NAPI (Rx polling mode) is supported in the e100 driver.
 
-  See https://wiki.linuxfoundation.org/networking/napi for more information
-  on NAPI.
+See https://wiki.linuxfoundation.org/networking/napi for more
+information on NAPI.
 
-  Multiple Interfaces on Same Ethernet Broadcast Network
-  ------------------------------------------------------
+Multiple Interfaces on Same Ethernet Broadcast Network
+------------------------------------------------------
 
-  Due to the default ARP behavior on Linux, it is not possible to have
-  one system on two IP networks in the same Ethernet broadcast domain
-  (non-partitioned switch) behave as expected. All Ethernet interfaces
-  will respond to IP traffic for any IP address assigned to the system.
-  This results in unbalanced receive traffic.
+Due to the default ARP behavior on Linux, it is not possible to have one
+system on two IP networks in the same Ethernet broadcast domain
+(non-partitioned switch) behave as expected.  All Ethernet interfaces
+will respond to IP traffic for any IP address assigned to the system.
+This results in unbalanced receive traffic.
 
-  If you have multiple interfaces in a server, either turn on ARP
-  filtering by
+If you have multiple interfaces in a server, either turn on ARP
+filtering by
 
-  (1) entering:: echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
-      (this only works if your kernel's version is higher than 2.4.5), or
+(1) entering:: echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
+    (this only works if your kernel's version is higher than 2.4.5), or
 
-  (2) installing the interfaces in separate broadcast domains (either
-      in different switches or in a switch partitioned to VLANs).
+(2) installing the interfaces in separate broadcast domains (either
+    in different switches or in a switch partitioned to VLANs).
 
 
 Support
diff --git a/Documentation/networking/e1000.rst b/Documentation/networking/e1000.rst
index 616848940e63f..144b87eef1534 100644
--- a/Documentation/networking/e1000.rst
+++ b/Documentation/networking/e1000.rst
@@ -1,3 +1,4 @@
+===========================================================
 Linux* Base Driver for Intel(R) Ethernet Network Connection
 ===========================================================
 
@@ -354,57 +355,58 @@ previously mentioned to force the adapter to the same speed and duplex.
 Additional Configurations
 =========================
 
-  Jumbo Frames
-  ------------
-  Jumbo Frames support is enabled by changing the MTU to a value larger than
-  the default of 1500.  Use the ifconfig command to increase the MTU size.
-  For example::
+Jumbo Frames
+------------
+Jumbo Frames support is enabled by changing the MTU to a value larger
+than the default of 1500.  Use the ifconfig command to increase the MTU
+size.  For example::
 
        ifconfig eth<x> mtu 9000 up
 
-  This setting is not saved across reboots.  It can be made permanent if
-  you add::
+This setting is not saved across reboots.  It can be made permanent if
+you add::
 
        MTU=9000
 
-   to the file /etc/sysconfig/network-scripts/ifcfg-eth<x>.  This example
-   applies to the Red Hat distributions; other distributions may store this
-   setting in a different location.
+to the file /etc/sysconfig/network-scripts/ifcfg-eth<x>.  This example
+applies to the Red Hat distributions; other distributions may store this
+setting in a different location.
+
+Notes: Degradation in throughput performance may be observed in some
+Jumbo frames environments.  If this is observed, increasing the
+application's socket buffer size and/or increasing the
+/proc/sys/net/ipv4/tcp_*mem entry values may help.  See the specific
+application manual and /usr/src/linux*/Documentation/
+networking/ip-sysctl.txt for more details.
 
-  Notes:
-  Degradation in throughput performance may be observed in some Jumbo frames
-  environments. If this is observed, increasing the application's socket buffer
-  size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help.
-  See the specific application manual and /usr/src/linux*/Documentation/
-  networking/ip-sysctl.txt for more details.
+- The maximum MTU setting for Jumbo Frames is 16110.  This value
+  coincides with the maximum Jumbo Frames size of 16128.
 
-  - The maximum MTU setting for Jumbo Frames is 16110.  This value coincides
-    with the maximum Jumbo Frames size of 16128.
+- Using Jumbo frames at 10 or 100 Mbps is not supported and may result
+  in poor performance or loss of link.
 
-  - Using Jumbo frames at 10 or 100 Mbps is not supported and may result in
-    poor performance or loss of link.
+- Adapters based on the Intel(R) 82542 and 82573V/E controller do not
+  support Jumbo Frames.  These correspond to the following product names:
+  Intel(R) PRO/1000 Gigabit Server Adapter Intel(R) PRO/1000 PM Network
+  Connection
 
-  - Adapters based on the Intel(R) 82542 and 82573V/E controller do not
-    support Jumbo Frames. These correspond to the following product names:
-     Intel(R) PRO/1000 Gigabit Server Adapter
-     Intel(R) PRO/1000 PM Network Connection
+ethtool
+-------
+The driver utilizes the ethtool interface for driver configuration and
+diagnostics, as well as displaying statistical information.  The ethtool
+version 1.6 or later is required for this functionality.
 
-  ethtool
-  -------
-  The driver utilizes the ethtool interface for driver configuration and
-  diagnostics, as well as displaying statistical information.  The ethtool
-  version 1.6 or later is required for this functionality.
+The latest release of ethtool can be found from
+https://www.kernel.org/pub/software/network/ethtool/
 
-  The latest release of ethtool can be found from
-  https://www.kernel.org/pub/software/network/ethtool/
+Enabling Wake on LAN* (WoL)
+---------------------------
+WoL is configured through the ethtool* utility.
 
-  Enabling Wake on LAN* (WoL)
-  ---------------------------
-  WoL is configured through the ethtool* utility.
+WoL will be enabled on the system during the next shut down or reboot.
+For this driver version, in order to enable WoL, the e1000 driver must be
+loaded when shutting down or rebooting the system.
 
-  WoL will be enabled on the system during the next shut down or reboot.
-  For this driver version, in order to enable WoL, the e1000 driver must be
-  loaded when shutting down or rebooting the system.
 
 Support
 =======
diff --git a/Documentation/networking/strparser.txt b/Documentation/networking/strparser.txt
index 13081b3decefa..a7d354ddda7ba 100644
--- a/Documentation/networking/strparser.txt
+++ b/Documentation/networking/strparser.txt
@@ -48,7 +48,7 @@ void strp_pause(struct strparser *strp)
      Temporarily pause a stream parser. Message parsing is suspended
      and no new messages are delivered to the upper layer.
 
-void strp_pause(struct strparser *strp)
+void strp_unpause(struct strparser *strp)
 
      Unpause a paused stream parser.
 
diff --git a/MAINTAINERS b/MAINTAINERS
index 6cfd16790adda..e19ec6d90a44e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9882,6 +9882,7 @@ M:	Andrew Lunn <andrew@lunn.ch>
 M:	Vivien Didelot <vivien.didelot@savoirfairelinux.com>
 M:	Florian Fainelli <f.fainelli@gmail.com>
 S:	Maintained
+F:	Documentation/devicetree/bindings/net/dsa/
 F:	net/dsa/
 F:	include/net/dsa.h
 F:	include/linux/dsa/
diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig
index d5c15e8bb3de7..f273af136fc7c 100644
--- a/drivers/net/ethernet/amd/Kconfig
+++ b/drivers/net/ethernet/amd/Kconfig
@@ -173,7 +173,7 @@ config SUNLANCE
 
 config AMD_XGBE
 	tristate "AMD 10GbE Ethernet driver"
-	depends on ((OF_NET && OF_ADDRESS) || ACPI || PCI) && HAS_IOMEM && HAS_DMA
+	depends on ((OF_NET && OF_ADDRESS) || ACPI || PCI) && HAS_IOMEM
 	depends on X86 || ARM64 || COMPILE_TEST
 	select BITREVERSE
 	select CRC32
diff --git a/drivers/net/ethernet/apm/xgene-v2/Kconfig b/drivers/net/ethernet/apm/xgene-v2/Kconfig
index 1205861b63189..eedd3f3dd22e2 100644
--- a/drivers/net/ethernet/apm/xgene-v2/Kconfig
+++ b/drivers/net/ethernet/apm/xgene-v2/Kconfig
@@ -1,6 +1,5 @@
 config NET_XGENE_V2
 	tristate "APM X-Gene SoC Ethernet-v2 Driver"
-	depends on HAS_DMA
 	depends on ARCH_XGENE || COMPILE_TEST
 	help
 	  This is the Ethernet driver for the on-chip ethernet interface
diff --git a/drivers/net/ethernet/apm/xgene/Kconfig b/drivers/net/ethernet/apm/xgene/Kconfig
index afccb033177b3..e4e33c900b577 100644
--- a/drivers/net/ethernet/apm/xgene/Kconfig
+++ b/drivers/net/ethernet/apm/xgene/Kconfig
@@ -1,6 +1,5 @@
 config NET_XGENE
 	tristate "APM X-Gene SoC Ethernet Driver"
-	depends on HAS_DMA
 	depends on ARCH_XGENE || COMPILE_TEST
 	select PHYLIB
 	select MDIO_XGENE
diff --git a/drivers/net/ethernet/arc/Kconfig b/drivers/net/ethernet/arc/Kconfig
index e743ddf463433..5d0ab8e74b680 100644
--- a/drivers/net/ethernet/arc/Kconfig
+++ b/drivers/net/ethernet/arc/Kconfig
@@ -24,7 +24,8 @@ config ARC_EMAC_CORE
 config ARC_EMAC
 	tristate "ARC EMAC support"
 	select ARC_EMAC_CORE
-	depends on OF_IRQ && OF_NET && HAS_DMA && (ARC || COMPILE_TEST)
+	depends on OF_IRQ && OF_NET
+	depends on ARC || COMPILE_TEST
 	---help---
 	  On some legacy ARC (Synopsys) FPGA boards such as ARCAngel4/ML50x
 	  non-standard on-chip ethernet device ARC EMAC 10/100 is used.
@@ -33,7 +34,8 @@ config ARC_EMAC
 config EMAC_ROCKCHIP
 	tristate "Rockchip EMAC support"
 	select ARC_EMAC_CORE
-	depends on OF_IRQ && OF_NET && REGULATOR && HAS_DMA && (ARCH_ROCKCHIP || COMPILE_TEST)
+	depends on OF_IRQ && OF_NET && REGULATOR
+	depends on ARCH_ROCKCHIP || COMPILE_TEST
 	---help---
 	  Support for Rockchip RK3036/RK3066/RK3188 EMAC ethernet controllers.
 	  This selects Rockchip SoC glue layer support for the
diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig
index af75156919edf..4c3bfde6e8de0 100644
--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -157,7 +157,6 @@ config BGMAC
 config BGMAC_BCMA
 	tristate "Broadcom iProc GBit BCMA support"
 	depends on BCMA && BCMA_HOST_SOC
-	depends on HAS_DMA
 	depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST
 	select BGMAC
 	select PHYLIB
@@ -170,7 +169,6 @@ config BGMAC_BCMA
 
 config BGMAC_PLATFORM
 	tristate "Broadcom iProc GBit platform support"
-	depends on HAS_DMA
 	depends on ARCH_BCM_IPROC || COMPILE_TEST
 	depends on OF
 	select BGMAC
diff --git a/drivers/net/ethernet/cadence/macb_ptp.c b/drivers/net/ethernet/cadence/macb_ptp.c
index 2220c771092b4..678835136bf80 100644
--- a/drivers/net/ethernet/cadence/macb_ptp.c
+++ b/drivers/net/ethernet/cadence/macb_ptp.c
@@ -170,10 +170,7 @@ static int gem_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
 
 	if (delta > TSU_NSEC_MAX_VAL) {
 		gem_tsu_get_time(&bp->ptp_clock_info, &now);
-		if (sign)
-			now = timespec64_sub(now, then);
-		else
-			now = timespec64_add(now, then);
+		now = timespec64_add(now, then);
 
 		gem_tsu_set_time(&bp->ptp_clock_info,
 				 (const struct timespec64 *)&now);
diff --git a/drivers/net/ethernet/calxeda/Kconfig b/drivers/net/ethernet/calxeda/Kconfig
index 07d2201530d26..9fdd496b90ff4 100644
--- a/drivers/net/ethernet/calxeda/Kconfig
+++ b/drivers/net/ethernet/calxeda/Kconfig
@@ -1,6 +1,6 @@
 config NET_CALXEDA_XGMAC
 	tristate "Calxeda 1G/10G XGMAC Ethernet driver"
-	depends on HAS_IOMEM && HAS_DMA
+	depends on HAS_IOMEM
 	depends on ARCH_HIGHBANK || COMPILE_TEST
 	select CRC32
 	help
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index dd04a2f89ce62..bc03c175a3cdf 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -263,7 +263,7 @@ static void dcb_tx_queue_prio_enable(struct net_device *dev, int enable)
 				"Can't %s DCB Priority on port %d, TX Queue %d: err=%d\n",
 				enable ? "set" : "unset", pi->port_id, i, -err);
 		else
-			txq->dcb_prio = value;
+			txq->dcb_prio = enable ? value : 0;
 	}
 }
 
diff --git a/drivers/net/ethernet/hisilicon/Kconfig b/drivers/net/ethernet/hisilicon/Kconfig
index 8bcf470ff5f38..fb1a7251f45d3 100644
--- a/drivers/net/ethernet/hisilicon/Kconfig
+++ b/drivers/net/ethernet/hisilicon/Kconfig
@@ -5,7 +5,7 @@
 config NET_VENDOR_HISILICON
 	bool "Hisilicon devices"
 	default y
-	depends on (OF || ACPI) && HAS_DMA
+	depends on OF || ACPI
 	depends on ARM || ARM64 || COMPILE_TEST
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y.
diff --git a/drivers/net/ethernet/marvell/Kconfig b/drivers/net/ethernet/marvell/Kconfig
index cc2f7701e71e1..f33fd22b351c8 100644
--- a/drivers/net/ethernet/marvell/Kconfig
+++ b/drivers/net/ethernet/marvell/Kconfig
@@ -18,8 +18,8 @@ if NET_VENDOR_MARVELL
 
 config MV643XX_ETH
 	tristate "Marvell Discovery (643XX) and Orion ethernet support"
-	depends on (MV64X60 || PPC32 || PLAT_ORION || COMPILE_TEST) && INET
-	depends on HAS_DMA
+	depends on MV64X60 || PPC32 || PLAT_ORION || COMPILE_TEST
+	depends on INET
 	select PHYLIB
 	select MVMDIO
 	---help---
@@ -58,7 +58,6 @@ config MVNETA_BM_ENABLE
 config MVNETA
 	tristate "Marvell Armada 370/38x/XP/37xx network interface support"
 	depends on ARCH_MVEBU || COMPILE_TEST
-	depends on HAS_DMA
 	select MVMDIO
 	select PHYLINK
 	---help---
@@ -84,7 +83,6 @@ config MVNETA_BM
 config MVPP2
 	tristate "Marvell Armada 375/7K/8K network interface support"
 	depends on ARCH_MVEBU || COMPILE_TEST
-	depends on HAS_DMA
 	select MVMDIO
 	select PHYLINK
 	---help---
@@ -93,7 +91,7 @@ config MVPP2
 
 config PXA168_ETH
 	tristate "Marvell pxa168 ethernet support"
-	depends on HAS_IOMEM && HAS_DMA
+	depends on HAS_IOMEM
 	depends on CPU_PXA168 || ARCH_BERLIN || COMPILE_TEST
 	select PHYLIB
 	---help---
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 17a904cc6a5e0..0ad2f3f7da85a 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -1932,7 +1932,7 @@ static int mvneta_rx_swbm(struct mvneta_port *pp, int rx_todo,
 		rx_bytes = rx_desc->data_size - (ETH_FCS_LEN + MVNETA_MH_SIZE);
 		index = rx_desc - rxq->descs;
 		data = rxq->buf_virt_addr[index];
-		phys_addr = rx_desc->buf_phys_addr;
+		phys_addr = rx_desc->buf_phys_addr - pp->rx_offset_correction;
 
 		if (!mvneta_rxq_desc_is_first_last(rx_status) ||
 		    (rx_status & MVNETA_RXD_ERR_SUMMARY)) {
diff --git a/drivers/net/ethernet/mellanox/mlxsw/Kconfig b/drivers/net/ethernet/mellanox/mlxsw/Kconfig
index f4d9c9975ac3d..82827a8d3d67c 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlxsw/Kconfig
@@ -30,7 +30,7 @@ config MLXSW_CORE_THERMAL
 
 config MLXSW_PCI
 	tristate "PCI bus implementation for Mellanox Technologies Switch ASICs"
-	depends on PCI && HAS_DMA && HAS_IOMEM && MLXSW_CORE
+	depends on PCI && HAS_IOMEM && MLXSW_CORE
 	default m
 	---help---
 	  This is PCI bus implementation for Mellanox Technologies Switch ASICs.
diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index fb2c8f8071e64..776a8a9be8e35 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -344,10 +344,9 @@ static int ocelot_port_stop(struct net_device *dev)
 static int ocelot_gen_ifh(u32 *ifh, struct frame_info *info)
 {
 	ifh[0] = IFH_INJ_BYPASS;
-	ifh[1] = (0xff00 & info->port) >> 8;
+	ifh[1] = (0xf00 & info->port) >> 8;
 	ifh[2] = (0xff & info->port) << 24;
-	ifh[3] = IFH_INJ_POP_CNT_DISABLE | (info->cpuq << 20) |
-		 (info->tag_type << 16) | info->vid;
+	ifh[3] = (info->tag_type << 16) | info->vid;
 
 	return 0;
 }
@@ -370,11 +369,13 @@ static int ocelot_port_xmit(struct sk_buff *skb, struct net_device *dev)
 			 QS_INJ_CTRL_SOF, QS_INJ_CTRL, grp);
 
 	info.port = BIT(port->chip_port);
-	info.cpuq = 0xff;
+	info.tag_type = IFH_TAG_TYPE_C;
+	info.vid = skb_vlan_tag_get(skb);
 	ocelot_gen_ifh(ifh, &info);
 
 	for (i = 0; i < IFH_LEN; i++)
-		ocelot_write_rix(ocelot, ifh[i], QS_INJ_WR, grp);
+		ocelot_write_rix(ocelot, (__force u32)cpu_to_be32(ifh[i]),
+				 QS_INJ_WR, grp);
 
 	count = (skb->len + 3) / 4;
 	last = skb->len % 4;
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 75dfac0248f45..f4cae2be0fda5 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -7148,7 +7148,7 @@ static void rtl8169_netpoll(struct net_device *dev)
 {
 	struct rtl8169_private *tp = netdev_priv(dev);
 
-	rtl8169_interrupt(pci_irq_vector(tp->pci_dev, 0), dev);
+	rtl8169_interrupt(pci_irq_vector(tp->pci_dev, 0), tp);
 }
 #endif
 
diff --git a/drivers/net/ethernet/renesas/Kconfig b/drivers/net/ethernet/renesas/Kconfig
index 27be51f0a421b..f3f7477043ce1 100644
--- a/drivers/net/ethernet/renesas/Kconfig
+++ b/drivers/net/ethernet/renesas/Kconfig
@@ -17,7 +17,6 @@ if NET_VENDOR_RENESAS
 
 config SH_ETH
 	tristate "Renesas SuperH Ethernet support"
-	depends on HAS_DMA
 	depends on ARCH_RENESAS || SUPERH || COMPILE_TEST
 	select CRC32
 	select MII
@@ -31,7 +30,6 @@ config SH_ETH
 
 config RAVB
 	tristate "Renesas Ethernet AVB support"
-	depends on HAS_DMA
 	depends on ARCH_RENESAS || COMPILE_TEST
 	select CRC32
 	select MII
diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c
index ad4a354ce570e..570ec72266f37 100644
--- a/drivers/net/ethernet/sfc/efx.c
+++ b/drivers/net/ethernet/sfc/efx.c
@@ -3180,6 +3180,7 @@ bool efx_rps_check_rule(struct efx_arfs_rule *rule, unsigned int filter_idx,
 	return true;
 }
 
+static
 struct hlist_head *efx_rps_hash_bucket(struct efx_nic *efx,
 				       const struct efx_filter_spec *spec)
 {
diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c
index cdbddf16dd293..4f1267477aa4b 100644
--- a/drivers/net/ethernet/ti/davinci_cpdma.c
+++ b/drivers/net/ethernet/ti/davinci_cpdma.c
@@ -205,7 +205,7 @@ static void cpdma_desc_pool_destroy(struct cpdma_ctlr *ctlr)
  * devices (e.g. cpsw switches) use plain old memory.  Descriptor pools
  * abstract out these details
  */
-int cpdma_desc_pool_create(struct cpdma_ctlr *ctlr)
+static int cpdma_desc_pool_create(struct cpdma_ctlr *ctlr)
 {
 	struct cpdma_params *cpdma_params = &ctlr->params;
 	struct cpdma_desc_pool *pool;
diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index a1a6445b5a7e2..f270beebb4289 100644
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -1387,6 +1387,10 @@ static int emac_devioctl(struct net_device *ndev, struct ifreq *ifrq, int cmd)
 
 static int match_first_device(struct device *dev, void *data)
 {
+	if (dev->parent && dev->parent->of_node)
+		return of_device_is_compatible(dev->parent->of_node,
+					       "ti,davinci_mdio");
+
 	return !strncmp(dev_name(dev), "davinci_mdio", 12);
 }
 
diff --git a/drivers/net/ipvlan/ipvlan_main.c b/drivers/net/ipvlan/ipvlan_main.c
index d02f0a7c534ef..23c1d66002413 100644
--- a/drivers/net/ipvlan/ipvlan_main.c
+++ b/drivers/net/ipvlan/ipvlan_main.c
@@ -594,7 +594,8 @@ int ipvlan_link_new(struct net *src_net, struct net_device *dev,
 	ipvlan->phy_dev = phy_dev;
 	ipvlan->dev = dev;
 	ipvlan->sfeatures = IPVLAN_FEATURES;
-	ipvlan_adjust_mtu(ipvlan, phy_dev);
+	if (!tb[IFLA_MTU])
+		ipvlan_adjust_mtu(ipvlan, phy_dev);
 	INIT_LIST_HEAD(&ipvlan->addrs);
 	spin_lock_init(&ipvlan->addrs_lock);
 
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 8e8b51f171f4f..8fac8e132c5bd 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1246,6 +1246,7 @@ static const struct usb_device_id products[] = {
 	{QMI_FIXED_INTF(0x413c, 0x81b3, 8)},	/* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card (rev3) */
 	{QMI_FIXED_INTF(0x413c, 0x81b6, 8)},	/* Dell Wireless 5811e */
 	{QMI_FIXED_INTF(0x413c, 0x81b6, 10)},	/* Dell Wireless 5811e */
+	{QMI_FIXED_INTF(0x413c, 0x81d7, 1)},	/* Dell Wireless 5821e */
 	{QMI_FIXED_INTF(0x03f0, 0x4e1d, 8)},	/* HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module */
 	{QMI_FIXED_INTF(0x03f0, 0x9d1d, 1)},	/* HP lt4120 Snapdragon X5 LTE */
 	{QMI_FIXED_INTF(0x22de, 0x9061, 3)},	/* WeTelecom WPD-600N */
diff --git a/drivers/net/wireless/broadcom/brcm80211/Kconfig b/drivers/net/wireless/broadcom/brcm80211/Kconfig
index 9d99eb42d9176..6acba67bca07a 100644
--- a/drivers/net/wireless/broadcom/brcm80211/Kconfig
+++ b/drivers/net/wireless/broadcom/brcm80211/Kconfig
@@ -60,7 +60,6 @@ config BRCMFMAC_PCIE
 	bool "PCIE bus interface support for FullMAC driver"
 	depends on BRCMFMAC
 	depends on PCI
-	depends on HAS_DMA
 	select BRCMFMAC_PROTO_MSGBUF
 	select FW_LOADER
 	---help---
diff --git a/drivers/net/wireless/quantenna/qtnfmac/Kconfig b/drivers/net/wireless/quantenna/qtnfmac/Kconfig
index 025fa60185508..8d1492a90bd13 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/Kconfig
+++ b/drivers/net/wireless/quantenna/qtnfmac/Kconfig
@@ -7,7 +7,7 @@ config QTNFMAC
 config QTNFMAC_PEARL_PCIE
 	tristate "Quantenna QSR10g PCIe support"
 	default n
-	depends on HAS_DMA && PCI && CFG80211
+	depends on PCI && CFG80211
 	select QTNFMAC
 	select FW_LOADER
 	select CRC32
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index 922ce0abf5cf1..a57daecf1d574 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -1810,7 +1810,7 @@ static int talk_to_netback(struct xenbus_device *dev,
 	err = xen_net_read_mac(dev, info->netdev->dev_addr);
 	if (err) {
 		xenbus_dev_fatal(dev, err, "parsing %s/mac", dev->nodename);
-		goto out;
+		goto out_unlocked;
 	}
 
 	rtnl_lock();
@@ -1925,6 +1925,7 @@ static int talk_to_netback(struct xenbus_device *dev,
 	xennet_destroy_queues(info);
  out:
 	rtnl_unlock();
+out_unlocked:
 	device_unregister(&dev->dev);
 	return err;
 }
@@ -1950,10 +1951,6 @@ static int xennet_connect(struct net_device *dev)
 	/* talk_to_netback() sets the correct number of queues */
 	num_queues = dev->real_num_tx_queues;
 
-	rtnl_lock();
-	netdev_update_features(dev);
-	rtnl_unlock();
-
 	if (dev->reg_state == NETREG_UNINITIALIZED) {
 		err = register_netdev(dev);
 		if (err) {
@@ -1963,6 +1960,10 @@ static int xennet_connect(struct net_device *dev)
 		}
 	}
 
+	rtnl_lock();
+	netdev_update_features(dev);
+	rtnl_unlock();
+
 	/*
 	 * All public and private state should now be sane.  Get
 	 * ready to start sending and receiving packets and give the driver
diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index 686dc670fd294..29756d88799b6 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -1226,7 +1226,8 @@ static long vhost_net_set_backend(struct vhost_net *n, unsigned index, int fd)
 	if (ubufs)
 		vhost_net_ubuf_put_wait_and_free(ubufs);
 err_ubufs:
-	sockfd_put(sock);
+	if (sock)
+		sockfd_put(sock);
 err_vq:
 	mutex_unlock(&vq->mutex);
 err:
diff --git a/include/linux/filter.h b/include/linux/filter.h
index b615df57b7d5b..20f2659dd8292 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -472,7 +472,9 @@ struct sock_fprog_kern {
 struct bpf_binary_header {
 	u16 pages;
 	u16 locked:1;
-	u8 image[];
+
+	/* Some arches need word alignment for their instructions */
+	u8 image[] __aligned(4);
 };
 
 struct bpf_prog {
diff --git a/net/bpfilter/Makefile b/net/bpfilter/Makefile
index dd86b022eff05..051dc18b8ccb5 100644
--- a/net/bpfilter/Makefile
+++ b/net/bpfilter/Makefile
@@ -22,7 +22,7 @@ endif
 quiet_cmd_copy_umh = GEN $@
       cmd_copy_umh = echo ':' > $(obj)/.bpfilter_umh.o.cmd; \
       $(OBJCOPY) -I binary \
-          `LC_ALL=C objdump -f net/bpfilter/bpfilter_umh \
+          `LC_ALL=C $(OBJDUMP) -f net/bpfilter/bpfilter_umh \
           |awk -F' |,' '/file format/{print "-O",$$NF} \
           /^architecture:/{print "-B",$$2}'` \
       --rename-section .data=.init.rodata $< $@
diff --git a/net/dccp/ccids/ccid3.c b/net/dccp/ccids/ccid3.c
index 8b5ba6dffac7e..12877a1514e7b 100644
--- a/net/dccp/ccids/ccid3.c
+++ b/net/dccp/ccids/ccid3.c
@@ -600,7 +600,7 @@ static void ccid3_hc_rx_send_feedback(struct sock *sk,
 {
 	struct ccid3_hc_rx_sock *hc = ccid3_hc_rx_sk(sk);
 	struct dccp_sock *dp = dccp_sk(sk);
-	ktime_t now = ktime_get_real();
+	ktime_t now = ktime_get();
 	s64 delta = 0;
 
 	switch (fbtype) {
@@ -625,15 +625,14 @@ static void ccid3_hc_rx_send_feedback(struct sock *sk,
 	case CCID3_FBACK_PERIODIC:
 		delta = ktime_us_delta(now, hc->rx_tstamp_last_feedback);
 		if (delta <= 0)
-			DCCP_BUG("delta (%ld) <= 0", (long)delta);
-		else
-			hc->rx_x_recv = scaled_div32(hc->rx_bytes_recv, delta);
+			delta = 1;
+		hc->rx_x_recv = scaled_div32(hc->rx_bytes_recv, delta);
 		break;
 	default:
 		return;
 	}
 
-	ccid3_pr_debug("Interval %ldusec, X_recv=%u, 1/p=%u\n", (long)delta,
+	ccid3_pr_debug("Interval %lldusec, X_recv=%u, 1/p=%u\n", delta,
 		       hc->rx_x_recv, hc->rx_pinv);
 
 	hc->rx_tstamp_last_feedback = now;
@@ -680,7 +679,8 @@ static int ccid3_hc_rx_insert_options(struct sock *sk, struct sk_buff *skb)
 static u32 ccid3_first_li(struct sock *sk)
 {
 	struct ccid3_hc_rx_sock *hc = ccid3_hc_rx_sk(sk);
-	u32 x_recv, p, delta;
+	u32 x_recv, p;
+	s64 delta;
 	u64 fval;
 
 	if (hc->rx_rtt == 0) {
@@ -688,7 +688,9 @@ static u32 ccid3_first_li(struct sock *sk)
 		hc->rx_rtt = DCCP_FALLBACK_RTT;
 	}
 
-	delta  = ktime_to_us(net_timedelta(hc->rx_tstamp_last_feedback));
+	delta = ktime_us_delta(ktime_get(), hc->rx_tstamp_last_feedback);
+	if (delta <= 0)
+		delta = 1;
 	x_recv = scaled_div32(hc->rx_bytes_recv, delta);
 	if (x_recv == 0) {		/* would also trigger divide-by-zero */
 		DCCP_WARN("X_recv==0\n");
diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c
index 975021df7c1cf..c0c74088f2afa 100644
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -2082,7 +2082,8 @@ void ipv6_mc_dad_complete(struct inet6_dev *idev)
 		mld_send_initial_cr(idev);
 		idev->mc_dad_count--;
 		if (idev->mc_dad_count)
-			mld_dad_start_timer(idev, idev->mc_maxdelay);
+			mld_dad_start_timer(idev,
+					    unsolicited_report_interval(idev));
 	}
 }
 
@@ -2094,7 +2095,8 @@ static void mld_dad_timer_expire(struct timer_list *t)
 	if (idev->mc_dad_count) {
 		idev->mc_dad_count--;
 		if (idev->mc_dad_count)
-			mld_dad_start_timer(idev, idev->mc_maxdelay);
+			mld_dad_start_timer(idev,
+					    unsolicited_report_interval(idev));
 	}
 	in6_dev_put(idev);
 }
@@ -2452,7 +2454,8 @@ static void mld_ifc_timer_expire(struct timer_list *t)
 	if (idev->mc_ifc_count) {
 		idev->mc_ifc_count--;
 		if (idev->mc_ifc_count)
-			mld_ifc_start_timer(idev, idev->mc_maxdelay);
+			mld_ifc_start_timer(idev,
+					    unsolicited_report_interval(idev));
 	}
 	in6_dev_put(idev);
 }
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 50809748c1279..ff8e7e245c375 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -2262,6 +2262,13 @@ static int tpacket_rcv(struct sk_buff *skb, struct net_device *dev,
 		if (po->stats.stats1.tp_drops)
 			status |= TP_STATUS_LOSING;
 	}
+
+	if (do_vnet &&
+	    virtio_net_hdr_from_skb(skb, h.raw + macoff -
+				    sizeof(struct virtio_net_hdr),
+				    vio_le(), true, 0))
+		goto drop_n_account;
+
 	po->stats.stats1.tp_packets++;
 	if (copy_skb) {
 		status |= TP_STATUS_COPY;
@@ -2269,15 +2276,6 @@ static int tpacket_rcv(struct sk_buff *skb, struct net_device *dev,
 	}
 	spin_unlock(&sk->sk_receive_queue.lock);
 
-	if (do_vnet) {
-		if (virtio_net_hdr_from_skb(skb, h.raw + macoff -
-					    sizeof(struct virtio_net_hdr),
-					    vio_le(), true, 0)) {
-			spin_lock(&sk->sk_receive_queue.lock);
-			goto drop_n_account;
-		}
-	}
-
 	skb_copy_bits(skb, 0, h.raw + macoff, snaplen);
 
 	if (!(ts_status = tpacket_get_timestamp(skb, &ts, po->tp_tstamp)))
diff --git a/net/sched/cls_flower.c b/net/sched/cls_flower.c
index 2b5be42a9f1ca..9e8b26a80fb3e 100644
--- a/net/sched/cls_flower.c
+++ b/net/sched/cls_flower.c
@@ -66,7 +66,7 @@ struct fl_flow_mask {
 	struct rhashtable_params filter_ht_params;
 	struct flow_dissector dissector;
 	struct list_head filters;
-	struct rcu_head rcu;
+	struct rcu_work rwork;
 	struct list_head list;
 };
 
@@ -203,6 +203,20 @@ static int fl_init(struct tcf_proto *tp)
 	return rhashtable_init(&head->ht, &mask_ht_params);
 }
 
+static void fl_mask_free(struct fl_flow_mask *mask)
+{
+	rhashtable_destroy(&mask->ht);
+	kfree(mask);
+}
+
+static void fl_mask_free_work(struct work_struct *work)
+{
+	struct fl_flow_mask *mask = container_of(to_rcu_work(work),
+						 struct fl_flow_mask, rwork);
+
+	fl_mask_free(mask);
+}
+
 static bool fl_mask_put(struct cls_fl_head *head, struct fl_flow_mask *mask,
 			bool async)
 {
@@ -210,12 +224,11 @@ static bool fl_mask_put(struct cls_fl_head *head, struct fl_flow_mask *mask,
 		return false;
 
 	rhashtable_remove_fast(&head->ht, &mask->ht_node, mask_ht_params);
-	rhashtable_destroy(&mask->ht);
 	list_del_rcu(&mask->list);
 	if (async)
-		kfree_rcu(mask, rcu);
+		tcf_queue_work(&mask->rwork, fl_mask_free_work);
 	else
-		kfree(mask);
+		fl_mask_free(mask);
 
 	return true;
 }
diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c
index 3ae9877ea2057..3278a76f68615 100644
--- a/net/sched/sch_hfsc.c
+++ b/net/sched/sch_hfsc.c
@@ -1385,8 +1385,8 @@ hfsc_schedule_watchdog(struct Qdisc *sch)
 		if (next_time == 0 || next_time > q->root.cl_cfmin)
 			next_time = q->root.cl_cfmin;
 	}
-	WARN_ON(next_time == 0);
-	qdisc_watchdog_schedule(&q->watchdog, next_time);
+	if (next_time)
+		qdisc_watchdog_schedule(&q->watchdog, next_time);
 }
 
 static int
diff --git a/net/sctp/chunk.c b/net/sctp/chunk.c
index 79daa98208c39..bfb9f812e2ef9 100644
--- a/net/sctp/chunk.c
+++ b/net/sctp/chunk.c
@@ -237,7 +237,9 @@ struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *asoc,
 	/* Account for a different sized first fragment */
 	if (msg_len >= first_len) {
 		msg->can_delay = 0;
-		SCTP_INC_STATS(sock_net(asoc->base.sk), SCTP_MIB_FRAGUSRMSGS);
+		if (msg_len > first_len)
+			SCTP_INC_STATS(sock_net(asoc->base.sk),
+				       SCTP_MIB_FRAGUSRMSGS);
 	} else {
 		/* Which may be the only one... */
 		first_len = msg_len;
diff --git a/net/strparser/strparser.c b/net/strparser/strparser.c
index 1a96951835999..373836615c577 100644
--- a/net/strparser/strparser.c
+++ b/net/strparser/strparser.c
@@ -392,7 +392,7 @@ static int strp_read_sock(struct strparser *strp)
 /* Lower sock lock held */
 void strp_data_ready(struct strparser *strp)
 {
-	if (unlikely(strp->stopped))
+	if (unlikely(strp->stopped) || strp->paused)
 		return;
 
 	/* This check is needed to synchronize with do_strp_work.
@@ -407,9 +407,6 @@ void strp_data_ready(struct strparser *strp)
 		return;
 	}
 
-	if (strp->paused)
-		return;
-
 	if (strp->need_bytes) {
 		if (strp_peek_len(strp) < strp->need_bytes)
 			return;
diff --git a/net/vmw_vsock/virtio_transport.c b/net/vmw_vsock/virtio_transport.c
index 8e03bd3f3668b..5d3cce9e8744d 100644
--- a/net/vmw_vsock/virtio_transport.c
+++ b/net/vmw_vsock/virtio_transport.c
@@ -201,7 +201,7 @@ virtio_transport_send_pkt(struct virtio_vsock_pkt *pkt)
 		return -ENODEV;
 	}
 
-	if (le32_to_cpu(pkt->hdr.dst_cid) == vsock->guest_cid)
+	if (le64_to_cpu(pkt->hdr.dst_cid) == vsock->guest_cid)
 		return virtio_transport_send_pkt_loopback(vsock, pkt);
 
 	if (pkt->reply)
diff --git a/tools/testing/selftests/net/.gitignore b/tools/testing/selftests/net/.gitignore
index 128e548aa377d..1a0ac3a29ec5f 100644
--- a/tools/testing/selftests/net/.gitignore
+++ b/tools/testing/selftests/net/.gitignore
@@ -12,3 +12,4 @@ tcp_mmap
 udpgso
 udpgso_bench_rx
 udpgso_bench_tx
+tcp_inq
diff --git a/tools/testing/selftests/net/config b/tools/testing/selftests/net/config
index 7ba089b33e8b8..cd3a2f1545b54 100644
--- a/tools/testing/selftests/net/config
+++ b/tools/testing/selftests/net/config
@@ -12,3 +12,5 @@ CONFIG_NET_IPVTI=y
 CONFIG_INET6_XFRM_MODE_TUNNEL=y
 CONFIG_IPV6_VTI=y
 CONFIG_DUMMY=y
+CONFIG_BRIDGE=y
+CONFIG_VLAN_8021Q=y