diff --git "a/tcl/target/1986\320\262\320\2651\321\202.cfg" "b/tcl/target/1986\320\262\320\2651\321\202.cfg"
deleted file mode 100644
index a3172ccab..000000000
--- "a/tcl/target/1986\320\262\320\2651\321\202.cfg"
+++ /dev/null
@@ -1,66 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-# 1986ВЕ1Т
-# http://milandr.ru/index.php?mact=Products,cntnt01,details,0&cntnt01productid=236&cntnt01returnid=68
-
-source [find target/swj-dp.tcl]
-
-if { [info exists CHIPNAME] } {
-   set _CHIPNAME $CHIPNAME
-} else {
-   set _CHIPNAME 1986ве1т
-}
-
-if { [info exists ENDIAN] } {
-   set _ENDIAN $ENDIAN
-} else {
-   set _ENDIAN little
-}
-
-# Work-area is a space in RAM used for flash programming
-if { [info exists WORKAREASIZE] } {
-   set _WORKAREASIZE $WORKAREASIZE
-} else {
-   set _WORKAREASIZE 0x4000
-}
-
-#jtag scan chain
-if { [info exists CPUTAPID] } {
-   set _CPUTAPID $CPUTAPID
-} else {
-   if { [using_jtag] } {
-      set _CPUTAPID 0x4ba00477
-   } {
-      # SWD IDCODE
-      set _CPUTAPID 0x2ba01477
-   }
-}
-swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
-
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m -endian $_ENDIAN -dap $_CHIPNAME.dap
-
-# use AHB-Lite SRAM for work area
-$_TARGETNAME configure -work-area-phys 0x20100000 -work-area-size $_WORKAREASIZE -work-area-backup 0
-
-# can't handle overlapping memory regions
-if { [info exists IMEMORY] && [string equal $IMEMORY true] } {
-   flash bank ${_CHIPNAME}_info.flash mdr 0x00000000 0x01000 0 0 $_TARGETNAME 1 1 4
-} else {
-   flash bank $_CHIPNAME.flash mdr 0x00000000 0x20000 0 0 $_TARGETNAME 0 32 4
-}
-
-# JTAG speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz
-adapter speed 1000
-
-adapter srst delay 100
-if {[using_jtag]} {
-   jtag_ntrst_delay 100
-}
-
-if {![using_hla]} {
-   # if srst is not fitted use SYSRESETREQ to
-   # perform a soft reset
-   cortex_m reset_config sysresetreq
-}
diff --git a/tcl/target/mdr32f9q2i.cfg b/tcl/target/mdr32f9q2i.cfg
deleted file mode 100644
index 6e958c61d..000000000
--- a/tcl/target/mdr32f9q2i.cfg
+++ /dev/null
@@ -1,65 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-# MDR32F9Q2I (1986ВЕ92У)
-# http://milandr.ru/index.php?mact=Products,cntnt01,details,0&cntnt01productid=57&cntnt01returnid=68
-
-source [find target/swj-dp.tcl]
-
-if { [info exists CHIPNAME] } {
-   set _CHIPNAME $CHIPNAME
-} else {
-   set _CHIPNAME mdr32f9q2i
-}
-
-if { [info exists ENDIAN] } {
-   set _ENDIAN $ENDIAN
-} else {
-   set _ENDIAN little
-}
-
-# Work-area is a space in RAM used for flash programming
-if { [info exists WORKAREASIZE] } {
-   set _WORKAREASIZE $WORKAREASIZE
-} else {
-   set _WORKAREASIZE 0x8000
-}
-
-#jtag scan chain
-if { [info exists CPUTAPID] } {
-   set _CPUTAPID $CPUTAPID
-} else {
-   if { [using_jtag] } {
-      set _CPUTAPID 0x4ba00477
-   } {
-      # SWD IDCODE
-      set _CPUTAPID 0x2ba01477
-   }
-}
-swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
-
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m -endian $_ENDIAN -dap $_CHIPNAME.dap
-
-$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
-
-# can't handle overlapping memory regions
-if { [info exists IMEMORY] && [string equal $IMEMORY true] } {
-   flash bank ${_CHIPNAME}_info.flash mdr 0x08000000 0x01000 0 0 $_TARGETNAME 1 1 4
-} else {
-   flash bank $_CHIPNAME.flash mdr 0x08000000 0x20000 0 0 $_TARGETNAME 0 32 4
-}
-
-# JTAG speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz
-adapter speed 1000
-
-adapter srst delay 100
-if {[using_jtag]} {
-   jtag_ntrst_delay 100
-}
-
-if {![using_hla]} {
-   # if srst is not fitted use SYSRESETREQ to
-   # perform a soft reset
-   cortex_m reset_config sysresetreq
-}