Skip to content

Latest commit

 

History

History
304 lines (208 loc) · 9.77 KB

BUILD.rst

File metadata and controls

304 lines (208 loc) · 9.77 KB

Creating SeleniumLibrary releases

These instructions cover steps needed to create new releases of SeleniumLibrary. Many individual steps are automated, but we don't want to automate the whole procedure because it would be hard to react if something goes terribly wrong. When applicable, the steps are listed as commands that can be copied and executed on the command line.

Operating system and Python requirements

Generating releases has only been tested on Linux, but it ought to work the same way also on OSX and other unixes. Generating releases on Windows may work but is not tested, supported, or recommended.

Creating releases is only supported with Python 3.6 or newer. If you are using Ubuntu or one of its derivatives and don't have Python 3.6 in the official package repository, you may consider using the Dead Snakes PPA.

The pip and invoke commands below are also expected to run on Python 3.6+. Alternatively, it's possible to use the python3.6 -m pip approach to run these commands.

Python dependencies

Many steps are automated using the generic Invoke tool with a help by our rellu utilities, but also other tools and modules are needed. A pre-condition is installing all these, and that's easiest done using pip and the provided requirements-build.txt file:

pip install -r requirements-dev.txt

Using Invoke

Invoke tasks are defined in the tasks.py file and they are executed from the command line like:

inv[oke] task [options]

Run invoke without arguments for help. All tasks can be listed using invoke --list and each task's usage with invoke --help task.

Different Git workflows

Git commands used below always expect that origin is the project main repository. If that's not the case, and instead origin is your personal fork, you probably still want to push to the main repository. In that case you need to add upstream or similar to git push commands before running them.

Make sure that adequate tests are executed before releases are created. For more information about unit tests see utest/README.rst or for acceptance tests see atest/README.rst.

  1. Check that you are on the master branch and have nothing left to commit, pull, or push:

    git branch
    git status
    git pull --rebase
    git push
    
  2. Clean up:

    invoke clean
    
  3. Set version information to a shell variable to ease copy-pasting further commands. Add aN, bN or rcN postfix if creating a pre-release:

    VERSION=<version>
    

    For example, VERSION=3.0.1 or VERSION=3.1a2.

  1. Set GitHub user information into shell variables to ease copy-pasting the following command:

    GITHUB_USERNAME=<username>
    GITHUB_PASSWORD=<password>
    

    Alternatively, supply the credentials when running that command.

  2. Generate a template for the release notes:

    invoke release-notes -w -v $VERSION -u $GITHUB_USERNAME -p $GITHUB_PASSWORD
    

    The -v $VERSION option can be omitted if version is already set. Omit the -w option if you just want to get release notes printed to the console, not written to a file.

    When generating release notes for a preview release like 3.0.2rc1, the list of issues is only going to contain issues with that label (e.g. rc1) or with a label of an earlier preview release (e.g. alpha1, beta2).

  1. Fill the missing details in the generated release notes template.

  2. Make sure that issues have correct information:

    • All issues should have type (bug, enhancement or task) and priority set. Notice that issues with the task type are automatically excluded from the release notes.
    • Issue priorities should be consistent.
    • Issue titles should be informative. Consistency is good here too, but no need to overdo it.

    If information needs to be added or edited, its better to edit it in the issue tracker than in the generated release notes. This allows re-generating the list of issues later if more issues are added.

  3. Add, commit and push:

    git add docs/SeleniumLibrary-$VERSION.rst
    git commit -m "Release notes for $VERSION" docs/SeleniumLibrary-$VERSION.rst
    git push
    
  4. Update later if necessary. Writing release notes is typically the biggest task when generating releases, and getting everything done in one go is often impossible.

  1. Set version information in src/SeleniumLibrary/__init__.py:

    invoke set-version $VERSION
    
  2. Commit and push changes:

    git commit -m "Updated version to $VERSION" src/SeleniumLibrary/__init__.py
    git push
    
  1. Generate new stub file in: src/SeleniumLibrary/__init__.pyi:

    invoke gen-stub
    
  2. Add, commit and push:

    git add src/SeleniumLibrary/__init__.pyi
    git commit -m "Generate stub file for $VERSION"
    git push
    

If generating release candidate or final release documentation, use invoke kw-docs` but if this alpha or beta release, use invoke kw-docs $VERSION. The invoke kw-docs $VERSION does not replace the previous final release documentation, instead it will create new file with docs/SeleniumLibrary-$VERSION.html. From the below, execute either 1.A or 1.B step. The step 2. is done always.

Note that this must be done after setting version above or docs will have wrong version number.

    1. Generate pre or final release keyword documentation:

      invoke kw-docs
      git commit -m "Generated docs for version $VERSION" docs/SeleniumLibrary.html
      git push
      

    OR

    1. Generate alpha or beta release keyword documentation:

      invoke kw-docs -v $VERSION
      git add docs/SeleniumLibrary-$VERSION.html
      git commit -m "Generated docs for version $VERSION"
      git push
      

Modify the README.rst and add new link after the official keywords docs. Commit and push the new README.rst:

git commit -m "Add alpha/beta kw docs for version $VERSION in README.rst" README.rst
git push
  1. If README.rst has changed, generate project documentation based on it. One can check with the command git log <previousversiontag>..HEAD --oneline README.rst:

    invoke project-docs
    git commit -m "Regenerated project docs" docs/index.html
    git push
    
  1. Create an annotated tag and push it:

    git tag -a v$VERSION -m "Release $VERSION"
    git push --tags
    
  2. Add short release notes to GitHub's releases page with a link to the full release notes.

  1. Checkout the earlier created tag if necessary:

    git checkout v$VERSION
    

    This isn't necessary if continuing right after tagging.

  2. Cleanup (again). This removes temporary files as well as build and dist directories:

    invoke clean
    
  3. Create source distribution and universal (i.e. Python 2 and 3 compatible) wheel:

    python setup.py sdist bdist_wheel --universal
    ls -l dist
    

    Distributions can be tested locally if needed.

  4. Upload distributions to PyPI:

    twine upload dist/*
    
  5. Verify that project the page at PyPI looks good.

  6. Test installation (add --pre with pre-releases):

    pip install --upgrade robotframework-seleniumlibrary
    
  1. Back to master if needed:

    git checkout master
    
  2. Set dev version based on the previous version:

    invoke set-version dev
    git commit -m "Back to dev version" src/SeleniumLibrary/__init__.py
    git push
    

    For example, 1.2.3 is changed to 1.2.4.dev1 and 2.0.1a1 to 2.0.1a2.dev1.

  3. Close the issue tracker milestone. Create also new milestone for the next release unless one exists already.

  1. robotframework-users and robotframework-announce lists. The latter is not needed with preview releases but should be used at least with major updates. Notice that sending to it requires admin rights.

  2. Twitter. Either Tweet something yourself and make sure it's re-tweeted by @robotframework, or send the message directly as @robotframework. This makes the note appear also at http://robotframework.org.

    Should include a link to more information. Possibly a link to the full release notes or an email to the aforementioned mailing lists.

  3. #seleniumlibrary channel on the Slack community. Possibly also #general with major releases.

  4. Robot Framework LinkedIn group. At least with major updates.

  5. forum.robotframework SeleniumLibrary channel.

  6. Consider sending announcements, at least with major releases, also to other forums where we want to make the library more well known. This includes Selenium forums as well as general testing and test automation forums.

    Need to possibly format the message slightly differently as not all recipients are familiar with Robot Framework nor this library.