Lifecycle: alpha
A Ruuvi Endpoint describes a single target or source of data. It might be a sensor value, such as temperature, actuator value, such as GPIO high/low, configuration value such as radio transmit power or iBeacon UUID etc. Endpoints are represented with one unsigned byte.
Different endpoints accept different types of Ruuvi messages. For example temperature endpoint will accept sensor configuration, offset write and log read commands while radio endpoint would accept TX power configuration.
Here is an authoritative listing of endpoints on Ruuvi devices. All implementations should follow these definitions for interoperability.
| Endpoint | identifier | Description | Unit for value | Lifecycle |
|---|---|---|---|---|
| Battery voltage | 0x20 | Voltage of device battery | 0.001 V | Proposal |
| Temperature | 0x30 | Temperature of device | 0.01 C | Alpha |
| Humidity | 0x31 | Humidity of device | 0.01 RH-% | Alpha |
| Pressure | 0x32 | Pressure of device | 1 Pa | Alpha |
| Environmental | 0x3A | All environmental values | None | Alpha |