diff --git a/Marlin/src/HAL/AVR/HAL.cpp b/Marlin/src/HAL/AVR/HAL.cpp index 666802725bc0..7c39c5200b4d 100644 --- a/Marlin/src/HAL/AVR/HAL.cpp +++ b/Marlin/src/HAL/AVR/HAL.cpp @@ -36,7 +36,7 @@ // ------------------------ // Don't initialize/override variable (which would happen in .init4) -uint8_t reset_reason __attribute__((section(".noinit"))); +uint8_t MarlinHAL::reset_reason __attribute__((section(".noinit"))); // ------------------------ // Public functions @@ -45,22 +45,22 @@ uint8_t reset_reason __attribute__((section(".noinit"))); __attribute__((naked)) // Don't output function pro- and epilogue __attribute__((used)) // Output the function, even if "not used" __attribute__((section(".init3"))) // Put in an early user definable section -void HAL_save_reset_reason() { +void save_reset_reason() { #if ENABLED(OPTIBOOT_RESET_REASON) __asm__ __volatile__( A("STS %0, r2") - : "=m"(reset_reason) + : "=m"(hal.reset_reason) ); #else - reset_reason = MCUSR; + hal.reset_reason = MCUSR; #endif // Clear within 16ms since WDRF bit enables a 16ms watchdog timer -> Boot loop - MCUSR = 0; + hal.clear_reset_source(); wdt_disable(); } -void HAL_init() { +void MarlinHAL::init() { // Init Servo Pins #define INIT_SERVO(N) OUT_WRITE(SERVO##N##_PIN, LOW) #if HAS_SERVO_0 @@ -79,7 +79,7 @@ void HAL_init() { init_pwm_timers(); // Init user timers to default frequency - 1000HZ } -void HAL_reboot() { +void MarlinHAL::reboot() { #if ENABLED(USE_WATCHDOG) while (1) { /* run out the watchdog */ } #else @@ -95,20 +95,20 @@ void HAL_reboot() { #else // !SDSUPPORT -extern "C" { - extern char __bss_end; - extern char __heap_start; - extern void* __brkval; - - int freeMemory() { - int free_memory; - if ((int)__brkval == 0) - free_memory = ((int)&free_memory) - ((int)&__bss_end); - else - free_memory = ((int)&free_memory) - ((int)__brkval); - return free_memory; + extern "C" { + extern char __bss_end; + extern char __heap_start; + extern void* __brkval; + + int freeMemory() { + int free_memory; + if ((int)__brkval == 0) + free_memory = ((int)&free_memory) - ((int)&__bss_end); + else + free_memory = ((int)&free_memory) - ((int)__brkval); + return free_memory; + } } -} #endif // !SDSUPPORT diff --git a/Marlin/src/HAL/AVR/HAL.h b/Marlin/src/HAL/AVR/HAL.h index f5cbcc9d51e1..e825b4def3af 100644 --- a/Marlin/src/HAL/AVR/HAL.h +++ b/Marlin/src/HAL/AVR/HAL.h @@ -74,9 +74,9 @@ #define CRITICAL_SECTION_START() unsigned char _sreg = SREG; cli() #define CRITICAL_SECTION_END() SREG = _sreg #endif -#define ISRS_ENABLED() TEST(SREG, SREG_I) -#define ENABLE_ISRS() sei() -#define DISABLE_ISRS() cli() + +#define HAL_CAN_SET_PWM_FREQ // This HAL supports PWM Frequency adjustment +#define PWM_FREQUENCY 1000 // Default PWM frequency when set_pwm_duty() is called without set_pwm_frequency() // ------------------------ // Types @@ -84,16 +84,15 @@ typedef int8_t pin_t; -#define SHARED_SERVOS HAS_SERVOS -#define HAL_SERVO_LIB Servo +#define SHARED_SERVOS HAS_SERVOS // Use shared/servos.cpp + +class Servo; +typedef Servo hal_servo_t; // ------------------------ -// Public Variables +// Serial ports // ------------------------ -extern uint8_t reset_reason; - -// Serial ports #ifdef USBCON #include "../../core/serial_hook.h" typedef ForwardSerial1Class< decltype(Serial) > DefaultSerial1; @@ -142,20 +141,31 @@ extern uint8_t reset_reason; #endif #endif -// ------------------------ -// Public functions -// ------------------------ +// +// ADC +// +#define HAL_ADC_VREF 5.0 +#define HAL_ADC_RESOLUTION 10 -void HAL_init(); +// +// Pin Mapping for M42, M43, M226 +// +#define GET_PIN_MAP_PIN(index) index +#define GET_PIN_MAP_INDEX(pin) pin +#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval) -//void cli(); +#define HAL_SENSITIVE_PINS 0, 1, -//void _delay_ms(const int delay); +#ifdef __AVR_AT90USB1286__ + #define JTAG_DISABLE() do{ MCUCR = 0x80; MCUCR = 0x80; }while(0) +#endif -inline void HAL_clear_reset_source() { } -inline uint8_t HAL_get_reset_source() { return reset_reason; } +// AVR compatibility +#define strtof strtod -void HAL_reboot(); +// ------------------------ +// Class Utilities +// ------------------------ #pragma GCC diagnostic push #if GCC_VERSION <= 50000 @@ -166,70 +176,96 @@ extern "C" int freeMemory(); #pragma GCC diagnostic pop -// ADC -#ifdef DIDR2 - #define HAL_ANALOG_SELECT(ind) do{ if (ind < 8) SBI(DIDR0, ind); else SBI(DIDR2, ind & 0x07); }while(0) -#else - #define HAL_ANALOG_SELECT(ind) SBI(DIDR0, ind); -#endif +// ------------------------ +// MarlinHAL Class +// ------------------------ -inline void HAL_adc_init() { - ADCSRA = _BV(ADEN) | _BV(ADSC) | _BV(ADIF) | 0x07; - DIDR0 = 0; - #ifdef DIDR2 - DIDR2 = 0; - #endif -} +class MarlinHAL { +public: -#define SET_ADMUX_ADCSRA(ch) ADMUX = _BV(REFS0) | (ch & 0x07); SBI(ADCSRA, ADSC) -#ifdef MUX5 - #define HAL_START_ADC(ch) if (ch > 7) ADCSRB = _BV(MUX5); else ADCSRB = 0; SET_ADMUX_ADCSRA(ch) -#else - #define HAL_START_ADC(ch) ADCSRB = 0; SET_ADMUX_ADCSRA(ch) -#endif + // Earliest possible init, before setup() + MarlinHAL() {} -#define HAL_ADC_VREF 5.0 -#define HAL_ADC_RESOLUTION 10 -#define HAL_READ_ADC() ADC -#define HAL_ADC_READY() !TEST(ADCSRA, ADSC) + static void init(); // Called early in setup() + static void init_board() {} // Called less early in setup() + static void reboot(); // Restart the firmware from 0x0 -#define GET_PIN_MAP_PIN(index) index -#define GET_PIN_MAP_INDEX(pin) pin -#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval) + // Interrupts + static bool isr_state() { return TEST(SREG, SREG_I); } + static void isr_on() { sei(); } + static void isr_off() { cli(); } -#define HAL_SENSITIVE_PINS 0, 1, + static void delay_ms(const int ms) { _delay_ms(ms); } -#ifdef __AVR_AT90USB1286__ - #define JTAG_DISABLE() do{ MCUCR = 0x80; MCUCR = 0x80; }while(0) -#endif + // Tasks, called from idle() + static void idletask() {} -// AVR compatibility -#define strtof strtod + // Reset + static uint8_t reset_reason; + static uint8_t get_reset_source() { return reset_reason; } + static void clear_reset_source() { MCUSR = 0; } -#define HAL_CAN_SET_PWM_FREQ // This HAL supports PWM Frequency adjustment -#define PWM_FREQUENCY 1000 // Default PWM frequency when set_pwm_duty() is called without set_pwm_frequency() + // Free SRAM + static int freeMemory() { return ::freeMemory(); } -/** - * set_pwm_frequency - * Sets the frequency of the timer corresponding to the provided pin - * as close as possible to the provided desired frequency. Internally - * calculates the required waveform generation mode, prescaler and - * resolution values required and sets the timer registers accordingly. - * NOTE that the frequency is applied to all pins on the timer (Ex OC3A, OC3B and OC3B) - * NOTE that there are limitations, particularly if using TIMER2. (see Configuration_adv.h -> FAST FAN PWM Settings) - */ -void set_pwm_frequency(const pin_t pin, const uint16_t f_desired); + // + // ADC Methods + // -/** - * set_pwm_duty - * Set the PWM duty cycle of the provided pin to the provided value - * Optionally allows inverting the duty cycle [default = false] - * Optionally allows changing the maximum size of the provided value to enable finer PWM duty control [default = 255] - */ -void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255, const bool invert=false); + // Called by Temperature::init once at startup + static void adc_init() { + ADCSRA = _BV(ADEN) | _BV(ADSC) | _BV(ADIF) | 0x07; + DIDR0 = 0; + #ifdef DIDR2 + DIDR2 = 0; + #endif + } -/* - * init_pwm_timers - * sets the default frequency for timers 2-5 to 1000HZ - */ -void init_pwm_timers(); + // Called by Temperature::init for each sensor at startup + static void adc_enable(const uint8_t ch) { + #ifdef DIDR2 + if (ch > 7) { SBI(DIDR2, ch & 0x07); return; } + #endif + SBI(DIDR0, ch); + } + + // Begin ADC sampling on the given channel + static void adc_start(const uint8_t ch) { + #ifdef MUX5 + ADCSRB = ch > 7 ? _BV(MUX5) : 0; + #else + ADCSRB = 0; + #endif + ADMUX = _BV(REFS0) | (ch & 0x07); + SBI(ADCSRA, ADSC); + } + + // Is the ADC ready for reading? + static bool adc_ready() { return !TEST(ADCSRA, ADSC); } + + // The current value of the ADC register + static __typeof__(ADC) adc_value() { return ADC; } + + /** + * init_pwm_timers + * Set the default frequency for timers 2-5 to 1000HZ + */ + static void init_pwm_timers(); + + /** + * Set the PWM duty cycle for the pin to the given value. + * Optionally invert the duty cycle [default = false] + * Optionally change the scale of the provided value to enable finer PWM duty control [default = 255] + */ + static void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255, const bool invert=false); + + /** + * Set the frequency of the timer for the given pin as close as + * possible to the provided desired frequency. Internally calculate + * the required waveform generation mode, prescaler, and resolution + * values and set timer registers accordingly. + * NOTE that the frequency is applied to all pins on the timer (Ex OC3A, OC3B and OC3B) + * NOTE that there are limitations, particularly if using TIMER2. (see Configuration_adv.h -> FAST_PWM_FAN Settings) + */ + static void set_pwm_frequency(const pin_t pin, const uint16_t f_desired); +}; diff --git a/Marlin/src/HAL/AVR/MarlinSerial.cpp b/Marlin/src/HAL/AVR/MarlinSerial.cpp index cd8bf5e6903b..986462437c8f 100644 --- a/Marlin/src/HAL/AVR/MarlinSerial.cpp +++ b/Marlin/src/HAL/AVR/MarlinSerial.cpp @@ -486,7 +486,7 @@ void MarlinSerial::write(const uint8_t c) { const uint8_t i = (tx_buffer.head + 1) & (Cfg::TX_SIZE - 1); // If global interrupts are disabled (as the result of being called from an ISR)... - if (!ISRS_ENABLED()) { + if (!hal.isr_state()) { // Make room by polling if it is possible to transmit, and do so! while (i == tx_buffer.tail) { @@ -534,7 +534,7 @@ void MarlinSerial::flushTX() { if (!_written) return; // If global interrupts are disabled (as the result of being called from an ISR)... - if (!ISRS_ENABLED()) { + if (!hal.isr_state()) { // Wait until everything was transmitted - We must do polling, as interrupts are disabled while (tx_buffer.head != tx_buffer.tail || !B_TXC) { diff --git a/Marlin/src/HAL/AVR/MarlinSerial.h b/Marlin/src/HAL/AVR/MarlinSerial.h index 84c5ddd2978e..7eb76000d66e 100644 --- a/Marlin/src/HAL/AVR/MarlinSerial.h +++ b/Marlin/src/HAL/AVR/MarlinSerial.h @@ -191,13 +191,13 @@ rx_framing_errors; static ring_buffer_pos_t rx_max_enqueued; - static FORCE_INLINE ring_buffer_pos_t atomic_read_rx_head(); + FORCE_INLINE static ring_buffer_pos_t atomic_read_rx_head(); static volatile bool rx_tail_value_not_stable; static volatile uint16_t rx_tail_value_backup; - static FORCE_INLINE void atomic_set_rx_tail(ring_buffer_pos_t value); - static FORCE_INLINE ring_buffer_pos_t atomic_read_rx_tail(); + FORCE_INLINE static void atomic_set_rx_tail(ring_buffer_pos_t value); + FORCE_INLINE static ring_buffer_pos_t atomic_read_rx_tail(); public: FORCE_INLINE static void store_rxd_char(); diff --git a/Marlin/src/HAL/AVR/fast_pwm.cpp b/Marlin/src/HAL/AVR/fast_pwm.cpp index f8201d028ebd..0a384172c32a 100644 --- a/Marlin/src/HAL/AVR/fast_pwm.cpp +++ b/Marlin/src/HAL/AVR/fast_pwm.cpp @@ -107,7 +107,7 @@ const Timer get_pwm_timer(const pin_t pin) { return Timer(); } -void set_pwm_frequency(const pin_t pin, const uint16_t f_desired) { +void MarlinHAL::set_pwm_frequency(const pin_t pin, const uint16_t f_desired) { const Timer timer = get_pwm_timer(pin); if (timer.isProtected || !timer.isPWM) return; // Don't proceed if protected timer or not recognized @@ -176,7 +176,7 @@ void set_pwm_frequency(const pin_t pin, const uint16_t f_desired) { _SET_ICRn(timer, res); // Set ICRn value (TOP) = res } -void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) { +void MarlinHAL::set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) { // If v is 0 or v_size (max), digitalWrite to LOW or HIGH. // Note that digitalWrite also disables PWM output for us (sets COM bit to 0) if (v == 0) @@ -201,7 +201,7 @@ void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255 } } -void init_pwm_timers() { +void MarlinHAL::init_pwm_timers() { // Init some timer frequencies to a default 1KHz const pin_t pwm_pin[] = { #ifdef __AVR_ATmega2560__ diff --git a/Marlin/src/HAL/AVR/math.h b/Marlin/src/HAL/AVR/math.h index 7ede4accc09e..7dd1018ff199 100644 --- a/Marlin/src/HAL/AVR/math.h +++ b/Marlin/src/HAL/AVR/math.h @@ -35,7 +35,7 @@ // C B A is longIn1 // D C B A is longIn2 // -static FORCE_INLINE uint16_t MultiU24X32toH16(uint32_t longIn1, uint32_t longIn2) { +FORCE_INLINE static uint16_t MultiU24X32toH16(uint32_t longIn1, uint32_t longIn2) { uint8_t tmp1; uint8_t tmp2; uint16_t intRes; @@ -89,7 +89,7 @@ static FORCE_INLINE uint16_t MultiU24X32toH16(uint32_t longIn1, uint32_t longIn2 // uses: // r26 to store 0 // r27 to store the byte 1 of the 24 bit result -static FORCE_INLINE uint16_t MultiU16X8toH16(uint8_t charIn1, uint16_t intIn2) { +FORCE_INLINE static uint16_t MultiU16X8toH16(uint8_t charIn1, uint16_t intIn2) { uint8_t tmp; uint16_t intRes; __asm__ __volatile__ ( diff --git a/Marlin/src/HAL/AVR/timers.h b/Marlin/src/HAL/AVR/timers.h index ba3c4acd29ea..33c3880b6b99 100644 --- a/Marlin/src/HAL/AVR/timers.h +++ b/Marlin/src/HAL/AVR/timers.h @@ -109,12 +109,12 @@ FORCE_INLINE void HAL_timer_start(const uint8_t timer_num, const uint32_t) { * (otherwise, characters will be lost due to UART overflow). * Then: Stepper, Endstops, Temperature, and -finally- all others. */ -#define HAL_timer_isr_prologue(T) -#define HAL_timer_isr_epilogue(T) +#define HAL_timer_isr_prologue(T) NOOP +#define HAL_timer_isr_epilogue(T) NOOP -/* 18 cycles maximum latency */ #ifndef HAL_STEP_TIMER_ISR +/* 18 cycles maximum latency */ #define HAL_STEP_TIMER_ISR() \ extern "C" void TIMER1_COMPA_vect() __attribute__ ((signal, naked, used, externally_visible)); \ extern "C" void TIMER1_COMPA_vect_bottom() asm ("TIMER1_COMPA_vect_bottom") __attribute__ ((used, externally_visible, noinline)); \ diff --git a/Marlin/src/HAL/DUE/HAL.cpp b/Marlin/src/HAL/DUE/HAL.cpp index a3985652e71d..bbd13dc05aac 100644 --- a/Marlin/src/HAL/DUE/HAL.cpp +++ b/Marlin/src/HAL/DUE/HAL.cpp @@ -34,7 +34,7 @@ // Public Variables // ------------------------ -uint16_t HAL_adc_result; +uint16_t MarlinHAL::adc_result; // ------------------------ // Public functions @@ -42,8 +42,7 @@ uint16_t HAL_adc_result; TERN_(POSTMORTEM_DEBUGGING, extern void install_min_serial()); -// HAL initialization task -void HAL_init() { +void MarlinHAL::init() { // Initialize the USB stack #if ENABLED(SDSUPPORT) OUT_WRITE(SDSS, HIGH); // Try to set SDSS inactive before any other SPI users start up @@ -52,21 +51,15 @@ void HAL_init() { TERN_(POSTMORTEM_DEBUGGING, install_min_serial()); // Install the min serial handler } -// HAL idle task -void HAL_idletask() { - // Perform USB stack housekeeping - usb_task_idle(); +void MarlinHAL::init_board() { + #ifdef BOARD_INIT + BOARD_INIT(); + #endif } -// Disable interrupts -void cli() { noInterrupts(); } - -// Enable interrupts -void sei() { interrupts(); } - -void HAL_clear_reset_source() { } +void MarlinHAL::idletask() { usb_task_idle(); } // Perform USB stack housekeeping -uint8_t HAL_get_reset_source() { +uint8_t MarlinHAL::get_reset_source() { switch ((RSTC->RSTC_SR >> 8) & 0x07) { case 0: return RST_POWER_ON; case 1: return RST_BACKUP; @@ -77,12 +70,7 @@ uint8_t HAL_get_reset_source() { } } -void HAL_reboot() { rstc_start_software_reset(RSTC); } - -void _delay_ms(const int delay_ms) { - // Todo: port for Due? - delay(delay_ms); -} +void MarlinHAL::reboot() { rstc_start_software_reset(RSTC); } extern "C" { extern unsigned int _ebss; // end of bss section @@ -94,19 +82,6 @@ int freeMemory() { return (int)&free_memory - (heap_end ?: (int)&_ebss); } -// ------------------------ -// ADC -// ------------------------ - -void HAL_adc_start_conversion(const uint8_t ch) { - HAL_adc_result = analogRead(ch); -} - -uint16_t HAL_adc_get_result() { - // nop - return HAL_adc_result; -} - // Forward the default serial ports #if USING_HW_SERIAL0 DefaultSerial1 MSerial0(false, Serial); diff --git a/Marlin/src/HAL/DUE/HAL.h b/Marlin/src/HAL/DUE/HAL.h index 96ab5d9808ac..9a02c9a0dcf5 100644 --- a/Marlin/src/HAL/DUE/HAL.h +++ b/Marlin/src/HAL/DUE/HAL.h @@ -38,6 +38,10 @@ #include "../../core/serial_hook.h" +// ------------------------ +// Serial ports +// ------------------------ + typedef ForwardSerial1Class< decltype(Serial) > DefaultSerial1; typedef ForwardSerial1Class< decltype(Serial1) > DefaultSerial2; typedef ForwardSerial1Class< decltype(Serial2) > DefaultSerial3; @@ -97,60 +101,38 @@ extern DefaultSerial4 MSerial3; #include "MarlinSerial.h" #include "MarlinSerialUSB.h" -// On AVR this is in math.h? -#define square(x) ((x)*(x)) +// ------------------------ +// Types +// ------------------------ typedef int8_t pin_t; -#define SHARED_SERVOS HAS_SERVOS -#define HAL_SERVO_LIB Servo +#define SHARED_SERVOS HAS_SERVOS // Use shared/servos.cpp + +class Servo; +typedef Servo hal_servo_t; // // Interrupts // -#define CRITICAL_SECTION_START() uint32_t primask = __get_PRIMASK(); __disable_irq() -#define CRITICAL_SECTION_END() if (!primask) __enable_irq() -#define ISRS_ENABLED() (!__get_PRIMASK()) -#define ENABLE_ISRS() __enable_irq() -#define DISABLE_ISRS() __disable_irq() - -void cli(); // Disable interrupts -void sei(); // Enable interrupts +#define sei() noInterrupts() +#define cli() interrupts() -void HAL_clear_reset_source(); // clear reset reason -uint8_t HAL_get_reset_source(); // get reset reason - -void HAL_reboot(); +#define CRITICAL_SECTION_START() const bool _irqon = hal.isr_state(); hal.isr_off() +#define CRITICAL_SECTION_END() if (_irqon) hal.isr_on() // // ADC // -extern uint16_t HAL_adc_result; // result of last ADC conversion +#define HAL_ADC_VREF 3.3 +#define HAL_ADC_RESOLUTION 10 #ifndef analogInputToDigitalPin #define analogInputToDigitalPin(p) ((p < 12U) ? (p) + 54U : -1) #endif -#define HAL_ANALOG_SELECT(ch) - -inline void HAL_adc_init() {}//todo - -#define HAL_ADC_VREF 3.3 -#define HAL_ADC_RESOLUTION 10 -#define HAL_START_ADC(ch) HAL_adc_start_conversion(ch) -#define HAL_READ_ADC() HAL_adc_result -#define HAL_ADC_READY() true - -void HAL_adc_start_conversion(const uint8_t ch); -uint16_t HAL_adc_get_result(); - -// -// PWM // -inline void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) { analogWrite(pin, v); } - -// -// Pin Map +// Pin Mapping for M42, M43, M226 // #define GET_PIN_MAP_PIN(index) index #define GET_PIN_MAP_INDEX(pin) pin @@ -159,27 +141,18 @@ inline void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, // // Tone // -void toneInit(); void tone(const pin_t _pin, const unsigned int frequency, const unsigned long duration=0); void noTone(const pin_t _pin); -// Enable hooks into idle and setup for HAL -#define HAL_IDLETASK 1 -void HAL_idletask(); -void HAL_init(); - -// -// Utility functions -// -void _delay_ms(const int delay); +// ------------------------ +// Class Utilities +// ------------------------ #pragma GCC diagnostic push #if GCC_VERSION <= 50000 #pragma GCC diagnostic ignored "-Wunused-function" #endif -int freeMemory(); - #pragma GCC diagnostic pop #ifdef __cplusplus @@ -189,3 +162,69 @@ char *dtostrf(double __val, signed char __width, unsigned char __prec, char *__s #ifdef __cplusplus } #endif + +// Return free RAM between end of heap (or end bss) and whatever is current +int freeMemory(); + +// ------------------------ +// MarlinHAL Class +// ------------------------ + +class MarlinHAL { +public: + + // Earliest possible init, before setup() + MarlinHAL() {} + + static void init(); // Called early in setup() + static void init_board(); // Called less early in setup() + static void reboot(); // Software reset + + // Interrupts + static bool isr_state() { return !__get_PRIMASK(); } + static void isr_on() { __enable_irq(); } + static void isr_off() { __disable_irq(); } + + static void delay_ms(const int ms) { delay(ms); } + + // Tasks, called from idle() + static void idletask(); + + // Reset + static uint8_t get_reset_source(); + static void clear_reset_source() {} + + // Free SRAM + static int freeMemory() { return ::freeMemory(); } + + // + // ADC Methods + // + + static uint16_t adc_result; + + // Called by Temperature::init once at startup + static void adc_init() {} + + // Called by Temperature::init for each sensor at startup + static void adc_enable(const uint8_t ch) {} + + // Begin ADC sampling on the given channel + static void adc_start(const uint8_t ch) { adc_result = analogRead(ch); } + + // Is the ADC ready for reading? + static bool adc_ready() { return true; } + + // The current value of the ADC register + static uint16_t adc_value() { return adc_result; } + + /** + * Set the PWM duty cycle for the pin to the given value. + * No inverting the duty cycle in this HAL. + * No changing the maximum size of the provided value to enable finer PWM duty control in this HAL. + */ + static void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) { + analogWrite(pin, v); + } + +}; diff --git a/Marlin/src/HAL/DUE/MarlinSerial.cpp b/Marlin/src/HAL/DUE/MarlinSerial.cpp index fe62ff5607d5..638f7a100722 100644 --- a/Marlin/src/HAL/DUE/MarlinSerial.cpp +++ b/Marlin/src/HAL/DUE/MarlinSerial.cpp @@ -406,7 +406,7 @@ size_t MarlinSerial::write(const uint8_t c) { const uint8_t i = (tx_buffer.head + 1) & (Cfg::TX_SIZE - 1); // If global interrupts are disabled (as the result of being called from an ISR)... - if (!ISRS_ENABLED()) { + if (!hal.isr_state()) { // Make room by polling if it is possible to transmit, and do so! while (i == tx_buffer.tail) { @@ -454,7 +454,7 @@ void MarlinSerial::flushTX() { if (!_written) return; // If global interrupts are disabled (as the result of being called from an ISR)... - if (!ISRS_ENABLED()) { + if (!hal.isr_state()) { // Wait until everything was transmitted - We must do polling, as interrupts are disabled while (tx_buffer.head != tx_buffer.tail || !(HWUART->UART_SR & UART_SR_TXEMPTY)) { diff --git a/Marlin/src/HAL/DUE/Tone.cpp b/Marlin/src/HAL/DUE/Tone.cpp index 1ac81faaf0e1..4bc8142aba27 100644 --- a/Marlin/src/HAL/DUE/Tone.cpp +++ b/Marlin/src/HAL/DUE/Tone.cpp @@ -35,7 +35,7 @@ static pin_t tone_pin; volatile static int32_t toggles; -void tone(const pin_t _pin, const unsigned int frequency, const unsigned long duration) { +void tone(const pin_t _pin, const unsigned int frequency, const unsigned long duration/*=0*/) { tone_pin = _pin; toggles = 2 * frequency * duration / 1000; HAL_timer_start(MF_TIMER_TONE, 2 * frequency); diff --git a/Marlin/src/HAL/DUE/timers.h b/Marlin/src/HAL/DUE/timers.h index e2932ff36f91..bcfd07e268c5 100644 --- a/Marlin/src/HAL/DUE/timers.h +++ b/Marlin/src/HAL/DUE/timers.h @@ -125,4 +125,4 @@ FORCE_INLINE static void HAL_timer_isr_prologue(const uint8_t timer_num) { pConfig->pTimerRegs->TC_CHANNEL[pConfig->channel].TC_SR; } -#define HAL_timer_isr_epilogue(T) +#define HAL_timer_isr_epilogue(T) NOOP diff --git a/Marlin/src/HAL/ESP32/HAL.cpp b/Marlin/src/HAL/ESP32/HAL.cpp index 499582b8c194..adf5cecabe41 100644 --- a/Marlin/src/HAL/ESP32/HAL.cpp +++ b/Marlin/src/HAL/ESP32/HAL.cpp @@ -52,7 +52,7 @@ // Externs // ------------------------ -portMUX_TYPE spinlock = portMUX_INITIALIZER_UNLOCKED; +portMUX_TYPE MarlinHAL::spinlock = portMUX_INITIALIZER_UNLOCKED; // ------------------------ // Local defines @@ -64,7 +64,7 @@ portMUX_TYPE spinlock = portMUX_INITIALIZER_UNLOCKED; // Public Variables // ------------------------ -uint16_t HAL_adc_result; +uint16_t MarlinHAL::adc_result; // ------------------------ // Private Variables @@ -95,20 +95,22 @@ volatile int numPWMUsed = 0, #endif #if ENABLED(USE_ESP32_EXIO) + HardwareSerial YSerial2(2); void Write_EXIO(uint8_t IO, uint8_t v) { - if (ISRS_ENABLED()) { - DISABLE_ISRS(); + if (hal.isr_state()) { + hal.isr_off(); YSerial2.write(0x80 | (((char)v) << 5) | (IO - 100)); - ENABLE_ISRS(); + hal.isr_on(); } else YSerial2.write(0x80 | (((char)v) << 5) | (IO - 100)); } + #endif -void HAL_init_board() { +void MarlinHAL::init_board() { #if ENABLED(USE_ESP32_TASK_WDT) esp_task_wdt_init(10, true); #endif @@ -154,27 +156,24 @@ void HAL_init_board() { #endif } -void HAL_idletask() { +void MarlinHAL::idletask() { #if BOTH(WIFISUPPORT, OTASUPPORT) OTA_handle(); #endif TERN_(ESP3D_WIFISUPPORT, esp3dlib.idletask()); } -void HAL_clear_reset_source() { } - -uint8_t HAL_get_reset_source() { return rtc_get_reset_reason(1); } +uint8_t MarlinHAL::get_reset_source() { return rtc_get_reset_reason(1); } -void HAL_reboot() { ESP.restart(); } - -void _delay_ms(int delay_ms) { delay(delay_ms); } +void MarlinHAL::reboot() { ESP.restart(); } // return free memory between end of heap (or end bss) and whatever is current -int freeMemory() { return ESP.getFreeHeap(); } +int MarlinHAL::freeMemory() { return ESP.getFreeHeap(); } // ------------------------ // ADC // ------------------------ + #define ADC1_CHANNEL(pin) ADC1_GPIO ## pin ## _CHANNEL adc1_channel_t get_channel(int pin) { @@ -196,7 +195,7 @@ void adc1_set_attenuation(adc1_channel_t chan, adc_atten_t atten) { } } -void HAL_adc_init() { +void MarlinHAL::adc_init() { // Configure ADC adc1_config_width(ADC_WIDTH_12Bit); @@ -228,11 +227,11 @@ void HAL_adc_init() { } } -void HAL_adc_start_conversion(const uint8_t adc_pin) { - const adc1_channel_t chan = get_channel(adc_pin); +void MarlinHAL::adc_start(const pin_t pin) { + const adc1_channel_t chan = get_channel(pin); uint32_t mv; esp_adc_cal_get_voltage((adc_channel_t)chan, &characteristics[attenuations[chan]], &mv); - HAL_adc_result = mv * 1023.0 / 3300.0; + adc_result = mv * 1023.0 / 3300.0; // Change the attenuation level based on the new reading adc_atten_t atten; diff --git a/Marlin/src/HAL/ESP32/HAL.h b/Marlin/src/HAL/ESP32/HAL.h index 78eebc8d823c..df52e2186cbd 100644 --- a/Marlin/src/HAL/ESP32/HAL.h +++ b/Marlin/src/HAL/ESP32/HAL.h @@ -49,8 +49,6 @@ // Defines // ------------------------ -extern portMUX_TYPE spinlock; - #define MYSERIAL1 flushableSerial #if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) @@ -65,9 +63,6 @@ extern portMUX_TYPE spinlock; #define CRITICAL_SECTION_START() portENTER_CRITICAL(&spinlock) #define CRITICAL_SECTION_END() portEXIT_CRITICAL(&spinlock) -#define ISRS_ENABLED() (spinlock.owner == portMUX_FREE_VAL) -#define ENABLE_ISRS() if (spinlock.owner != portMUX_FREE_VAL) portEXIT_CRITICAL(&spinlock) -#define DISABLE_ISRS() portENTER_CRITICAL(&spinlock) // ------------------------ // Types @@ -75,14 +70,8 @@ extern portMUX_TYPE spinlock; typedef int16_t pin_t; -#define HAL_SERVO_LIB Servo - -// ------------------------ -// Public Variables -// ------------------------ - -/** result of last ADC conversion */ -extern uint16_t HAL_adc_result; +class Servo; +typedef Servo hal_servo_t; // ------------------------ // Public functions @@ -91,59 +80,18 @@ extern uint16_t HAL_adc_result; // // Tone // -void toneInit(); void tone(const pin_t _pin, const unsigned int frequency, const unsigned long duration=0); void noTone(const pin_t _pin); -// clear reset reason -void HAL_clear_reset_source(); - -// reset reason -uint8_t HAL_get_reset_source(); - -void HAL_reboot(); - -void _delay_ms(int delay); - -#pragma GCC diagnostic push -#if GCC_VERSION <= 50000 - #pragma GCC diagnostic ignored "-Wunused-function" -#endif - -int freeMemory(); - -#pragma GCC diagnostic pop - void analogWrite(pin_t pin, int value); -// ADC -#define HAL_ANALOG_SELECT(pin) - -void HAL_adc_init(); - -#define HAL_ADC_VREF 3.3 -#define HAL_ADC_RESOLUTION 10 -#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin) -#define HAL_READ_ADC() HAL_adc_result -#define HAL_ADC_READY() true - -void HAL_adc_start_conversion(const uint8_t adc_pin); - -// PWM -inline void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) { analogWrite(pin, v); } - -// Pin Map +// +// Pin Mapping for M42, M43, M226 +// #define GET_PIN_MAP_PIN(index) index #define GET_PIN_MAP_INDEX(pin) pin #define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval) -// Enable hooks into idle and setup for HAL -#define HAL_IDLETASK 1 -#define BOARD_INIT() HAL_init_board() -void HAL_idletask(); -inline void HAL_init() {} -void HAL_init_board(); - #if ENABLED(USE_ESP32_EXIO) void Write_EXIO(uint8_t IO, uint8_t v); #endif @@ -188,3 +136,85 @@ FORCE_INLINE static void DELAY_CYCLES(uint32_t x) { } } + +// ------------------------ +// Class Utilities +// ------------------------ + +#pragma GCC diagnostic push +#if GCC_VERSION <= 50000 + #pragma GCC diagnostic ignored "-Wunused-function" +#endif + +int freeMemory(); + +#pragma GCC diagnostic pop + +void _delay_ms(const int ms); + +// ------------------------ +// MarlinHAL Class +// ------------------------ + +#define HAL_ADC_VREF 3.3 +#define HAL_ADC_RESOLUTION 10 + +class MarlinHAL { +public: + + // Earliest possible init, before setup() + MarlinHAL() {} + + static void init() {} // Called early in setup() + static void init_board(); // Called less early in setup() + static void reboot(); // Restart the firmware + + // Interrupts + static portMUX_TYPE spinlock; + static bool isr_state() { return spinlock.owner == portMUX_FREE_VAL; } + static void isr_on() { if (spinlock.owner != portMUX_FREE_VAL) portEXIT_CRITICAL(&spinlock); } + static void isr_off() { portENTER_CRITICAL(&spinlock); } + + static void delay_ms(const int ms) { _delay_ms(ms); } + + // Tasks, called from idle() + static void idletask(); + + // Reset + static uint8_t get_reset_source(); + static void clear_reset_source() {} + + // Free SRAM + static int freeMemory(); + + // + // ADC Methods + // + + static uint16_t adc_result; + + // Called by Temperature::init once at startup + static void adc_init(); + + // Called by Temperature::init for each sensor at startup + static void adc_enable(const pin_t pin) {} + + // Begin ADC sampling on the given channel + static void adc_start(const pin_t pin); + + // Is the ADC ready for reading? + static bool adc_ready() { return true; } + + // The current value of the ADC register + static uint16_t adc_value() { return adc_result; } + + /** + * Set the PWM duty cycle for the pin to the given value. + * No inverting the duty cycle in this HAL. + * No changing the maximum size of the provided value to enable finer PWM duty control in this HAL. + */ + static void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) { + analogWrite(pin, v); + } + +}; diff --git a/Marlin/src/HAL/ESP32/Tone.cpp b/Marlin/src/HAL/ESP32/Tone.cpp index 9c16cdde800a..839c612b6a87 100644 --- a/Marlin/src/HAL/ESP32/Tone.cpp +++ b/Marlin/src/HAL/ESP32/Tone.cpp @@ -35,7 +35,7 @@ static pin_t tone_pin; volatile static int32_t toggles; -void tone(const pin_t _pin, const unsigned int frequency, const unsigned long duration) { +void tone(const pin_t _pin, const unsigned int frequency, const unsigned long duration/*=0*/) { tone_pin = _pin; toggles = 2 * frequency * duration / 1000; HAL_timer_start(MF_TIMER_TONE, 2 * frequency); diff --git a/Marlin/src/HAL/ESP32/timers.cpp b/Marlin/src/HAL/ESP32/timers.cpp index df0065f45396..c37ad2430cb2 100644 --- a/Marlin/src/HAL/ESP32/timers.cpp +++ b/Marlin/src/HAL/ESP32/timers.cpp @@ -81,7 +81,7 @@ void IRAM_ATTR timer_isr(void *para) { * @param timer_num timer number to initialize * @param frequency frequency of the timer */ -void HAL_timer_start(const uint8_t timer_num, uint32_t frequency) { +void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) { const tTimerConfig timer = timer_config[timer_num]; timer_config_t config; diff --git a/Marlin/src/HAL/ESP32/timers.h b/Marlin/src/HAL/ESP32/timers.h index 266169848daf..aa4e1551f066 100644 --- a/Marlin/src/HAL/ESP32/timers.h +++ b/Marlin/src/HAL/ESP32/timers.h @@ -127,7 +127,7 @@ extern const tTimerConfig timer_config[]; // Public functions // ------------------------ -void HAL_timer_start (const uint8_t timer_num, uint32_t frequency); +void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency); void HAL_timer_set_compare(const uint8_t timer_num, const hal_timer_t count); hal_timer_t HAL_timer_get_compare(const uint8_t timer_num); hal_timer_t HAL_timer_get_count(const uint8_t timer_num); @@ -136,5 +136,5 @@ void HAL_timer_enable_interrupt(const uint8_t timer_num); void HAL_timer_disable_interrupt(const uint8_t timer_num); bool HAL_timer_interrupt_enabled(const uint8_t timer_num); -#define HAL_timer_isr_prologue(T) -#define HAL_timer_isr_epilogue(T) +#define HAL_timer_isr_prologue(T) NOOP +#define HAL_timer_isr_epilogue(T) NOOP diff --git a/Marlin/src/HAL/LINUX/HAL.cpp b/Marlin/src/HAL/LINUX/HAL.cpp index 0b679170ef17..db43f42eaafd 100644 --- a/Marlin/src/HAL/LINUX/HAL.cpp +++ b/Marlin/src/HAL/LINUX/HAL.cpp @@ -24,6 +24,10 @@ #include "../../inc/MarlinConfig.h" #include "../shared/Delay.h" +// ------------------------ +// Serial ports +// ------------------------ + MSerialT usb_serial(TERN0(EMERGENCY_PARSER, true)); // U8glib required functions @@ -37,42 +41,21 @@ extern "C" { //************************// // return free heap space -int freeMemory() { - return 0; -} +int freeMemory() { return 0; } // ------------------------ // ADC // ------------------------ -void HAL_adc_init() { - -} - -void HAL_adc_enable_channel(const uint8_t ch) { - -} - -uint8_t active_ch = 0; -void HAL_adc_start_conversion(const uint8_t ch) { - active_ch = ch; -} - -bool HAL_adc_finished() { - return true; -} +uint8_t MarlinHAL::active_ch = 0; -uint16_t HAL_adc_get_result() { - pin_t pin = analogInputToDigitalPin(active_ch); +uint16_t MarlinHAL::adc_value() { + const pin_t pin = analogInputToDigitalPin(active_ch); if (!VALID_PIN(pin)) return 0; - uint16_t data = ((Gpio::get(pin) >> 2) & 0x3FF); + const uint16_t data = ((Gpio::get(pin) >> 2) & 0x3FF); return data; // return 10bit value as Marlin expects } -void HAL_pwm_init() { - -} - -void HAL_reboot() { /* Reset the application state and GPIO */ } +void MarlinHAL::reboot() { /* Reset the application state and GPIO */ } #endif // __PLAT_LINUX__ diff --git a/Marlin/src/HAL/LINUX/HAL.h b/Marlin/src/HAL/LINUX/HAL.h index d7d3a92b73b9..43899c632de5 100644 --- a/Marlin/src/HAL/LINUX/HAL.h +++ b/Marlin/src/HAL/LINUX/HAL.h @@ -21,25 +21,42 @@ */ #pragma once -#define CPU_32_BIT - -#define F_CPU 100000000UL -#define SystemCoreClock F_CPU #include #include #include - #undef min #undef max - #include -void _printf (const char *format, ...); +#include "hardware/Clock.h" + +#include "../shared/Marduino.h" +#include "../shared/math_32bit.h" +#include "../shared/HAL_SPI.h" +#include "fastio.h" +#include "watchdog.h" +#include "serial.h" + +// ------------------------ +// Defines +// ------------------------ + +#define CPU_32_BIT +#define SHARED_SERVOS HAS_SERVOS // Use shared/servos.cpp + +#define F_CPU 100000000UL +#define SystemCoreClock F_CPU + +#define DELAY_CYCLES(x) Clock::delayCycles(x) + +#define CPU_ST7920_DELAY_1 600 +#define CPU_ST7920_DELAY_2 750 +#define CPU_ST7920_DELAY_3 750 + +void _printf(const char *format, ...); void _putc(uint8_t c); uint8_t _getc(); -//extern "C" volatile uint32_t _millis; - //arduino: Print.h #define DEC 10 #define HEX 16 @@ -49,36 +66,27 @@ uint8_t _getc(); #define B01 1 #define B10 2 -#include "hardware/Clock.h" - -#include "../shared/Marduino.h" -#include "../shared/math_32bit.h" -#include "../shared/HAL_SPI.h" -#include "fastio.h" -#include "watchdog.h" -#include "serial.h" - -#define SHARED_SERVOS HAS_SERVOS +// ------------------------ +// Serial ports +// ------------------------ extern MSerialT usb_serial; #define MYSERIAL1 usb_serial -#define CPU_ST7920_DELAY_1 600 -#define CPU_ST7920_DELAY_2 750 -#define CPU_ST7920_DELAY_3 750 - // // Interrupts // #define CRITICAL_SECTION_START() #define CRITICAL_SECTION_END() -#define ISRS_ENABLED() -#define ENABLE_ISRS() -#define DISABLE_ISRS() -inline void HAL_init() {} +// ADC +#define HAL_ADC_VREF 5.0 +#define HAL_ADC_RESOLUTION 10 + +// ------------------------ +// Class Utilities +// ------------------------ -// Utility functions #pragma GCC diagnostic push #if GCC_VERSION <= 50000 #pragma GCC diagnostic ignored "-Wunused-function" @@ -88,29 +96,66 @@ int freeMemory(); #pragma GCC diagnostic pop -// ADC -#define HAL_ADC_VREF 5.0 -#define HAL_ADC_RESOLUTION 10 -#define HAL_ANALOG_SELECT(ch) HAL_adc_enable_channel(ch) -#define HAL_START_ADC(ch) HAL_adc_start_conversion(ch) -#define HAL_READ_ADC() HAL_adc_get_result() -#define HAL_ADC_READY() true +// ------------------------ +// MarlinHAL Class +// ------------------------ + +class MarlinHAL { +public: + + // Earliest possible init, before setup() + MarlinHAL() {} + + static void init() {} // Called early in setup() + static void init_board() {} // Called less early in setup() + static void reboot(); // Reset the application state and GPIO + + // Interrupts + static bool isr_state() { return true; } + static void isr_on() {} + static void isr_off() {} + + static void delay_ms(const int ms) { _delay_ms(ms); } + + // Tasks, called from idle() + static void idletask() {} + + // Reset + static constexpr uint8_t reset_reason = RST_POWER_ON; + static uint8_t get_reset_source() { return reset_reason; } + static void clear_reset_source() {} + + // Free SRAM + static int freeMemory() { return ::freeMemory(); } + + // + // ADC Methods + // + + static uint8_t active_ch; + + // Called by Temperature::init once at startup + static void adc_init() {} + + // Called by Temperature::init for each sensor at startup + static void adc_enable(const uint8_t) {} -void HAL_adc_init(); -void HAL_adc_enable_channel(const uint8_t ch); -void HAL_adc_start_conversion(const uint8_t ch); -uint16_t HAL_adc_get_result(); + // Begin ADC sampling on the given channel + static void adc_start(const uint8_t ch) { active_ch = ch; } -// PWM -inline void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) { analogWrite(pin, v); } + // Is the ADC ready for reading? + static bool adc_ready() { return true; } -// Reset source -inline void HAL_clear_reset_source(void) {} -inline uint8_t HAL_get_reset_source(void) { return RST_POWER_ON; } + // The current value of the ADC register + static uint16_t adc_value(); -void HAL_reboot(); // Reset the application state and GPIO + /** + * Set the PWM duty cycle for the pin to the given value. + * No option to change the resolution or invert the duty cycle. + */ + static void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) { + analogWrite(pin, v); + } -/* ---------------- Delay in cycles */ -FORCE_INLINE static void DELAY_CYCLES(uint64_t x) { - Clock::delayCycles(x); -} + static void set_pwm_frequency(const pin_t, int) {} +}; diff --git a/Marlin/src/HAL/LINUX/arduino.cpp b/Marlin/src/HAL/LINUX/arduino.cpp index 4b56d02a389c..075b4ccde2f4 100644 --- a/Marlin/src/HAL/LINUX/arduino.cpp +++ b/Marlin/src/HAL/LINUX/arduino.cpp @@ -31,9 +31,7 @@ void cli() { } // Disable void sei() { } // Enable // Time functions -void _delay_ms(const int delay_ms) { - delay(delay_ms); -} +void _delay_ms(const int ms) { delay(ms); } uint32_t millis() { return (uint32_t)Clock::millis(); diff --git a/Marlin/src/HAL/LINUX/include/Arduino.h b/Marlin/src/HAL/LINUX/include/Arduino.h index d4086e259a2f..f05aaed88083 100644 --- a/Marlin/src/HAL/LINUX/include/Arduino.h +++ b/Marlin/src/HAL/LINUX/include/Arduino.h @@ -59,10 +59,9 @@ typedef uint8_t byte; #endif #define sq(v) ((v) * (v)) -#define square(v) sq(v) #define constrain(value, arg_min, arg_max) ((value) < (arg_min) ? (arg_min) :((value) > (arg_max) ? (arg_max) : (value))) -//Interrupts +// Interrupts void cli(); // Disable void sei(); // Enable void attachInterrupt(uint32_t pin, void (*callback)(), uint32_t mode); @@ -74,8 +73,8 @@ extern "C" { } // Time functions -extern "C" void delay(const int milis); -void _delay_ms(const int delay); +extern "C" void delay(const int ms); +void _delay_ms(const int ms); void delayMicroseconds(unsigned long); uint32_t millis(); diff --git a/Marlin/src/HAL/LINUX/timers.h b/Marlin/src/HAL/LINUX/timers.h index a98ceb6f391d..2d2a95774c1b 100644 --- a/Marlin/src/HAL/LINUX/timers.h +++ b/Marlin/src/HAL/LINUX/timers.h @@ -92,5 +92,5 @@ void HAL_timer_enable_interrupt(const uint8_t timer_num); void HAL_timer_disable_interrupt(const uint8_t timer_num); bool HAL_timer_interrupt_enabled(const uint8_t timer_num); -#define HAL_timer_isr_prologue(T) -#define HAL_timer_isr_epilogue(T) +#define HAL_timer_isr_prologue(T) NOOP +#define HAL_timer_isr_epilogue(T) NOOP diff --git a/Marlin/src/HAL/LPC1768/HAL.cpp b/Marlin/src/HAL/LPC1768/HAL.cpp index cee9cfc5f744..541848b08acc 100644 --- a/Marlin/src/HAL/LPC1768/HAL.cpp +++ b/Marlin/src/HAL/LPC1768/HAL.cpp @@ -31,7 +31,7 @@ DefaultSerial1 USBSerial(false, UsbSerial); -uint32_t HAL_adc_reading = 0; +uint32_t MarlinHAL::adc_result = 0; // U8glib required functions extern "C" { @@ -41,8 +41,6 @@ extern "C" { void u8g_Delay(uint16_t val) { delay(val); } } -//************************// - // return free heap space int freeMemory() { char stack_end; @@ -54,33 +52,33 @@ int freeMemory() { return result; } -// scan command line for code -// return index into pin map array if found and the pin is valid. -// return dval if not found or not a valid pin. -int16_t PARSED_PIN_INDEX(const char code, const int16_t dval) { - const uint16_t val = (uint16_t)parser.intval(code, -1), port = val / 100, pin = val % 100; - const int16_t ind = (port < ((NUM_DIGITAL_PINS) >> 5) && pin < 32) ? ((port << 5) | pin) : -2; - return ind > -1 ? ind : dval; +void MarlinHAL::reboot() { NVIC_SystemReset(); } + +uint8_t MarlinHAL::get_reset_source() { + #if ENABLED(USE_WATCHDOG) + if (watchdog_timed_out()) return RST_WATCHDOG; + #endif + return RST_POWER_ON; +} + +void MarlinHAL::clear_reset_source() { + TERN_(USE_WATCHDOG, watchdog_clear_timeout_flag()); } void flashFirmware(const int16_t) { delay(500); // Give OS time to disconnect USB_Connect(false); // USB clear connection delay(1000); // Give OS time to notice - HAL_reboot(); + hal.reboot(); } -void HAL_clear_reset_source(void) { - TERN_(USE_WATCHDOG, watchdog_clear_timeout_flag()); -} - -uint8_t HAL_get_reset_source(void) { - #if ENABLED(USE_WATCHDOG) - if (watchdog_timed_out()) return RST_WATCHDOG; - #endif - return RST_POWER_ON; +// For M42/M43, scan command line for pin code +// return index into pin map array if found and the pin is valid. +// return dval if not found or not a valid pin. +int16_t PARSED_PIN_INDEX(const char code, const int16_t dval) { + const uint16_t val = (uint16_t)parser.intval(code, -1), port = val / 100, pin = val % 100; + const int16_t ind = (port < ((NUM_DIGITAL_PINS) >> 5) && pin < 32) ? ((port << 5) | pin) : -2; + return ind > -1 ? ind : dval; } -void HAL_reboot() { NVIC_SystemReset(); } - #endif // TARGET_LPC1768 diff --git a/Marlin/src/HAL/LPC1768/HAL.h b/Marlin/src/HAL/LPC1768/HAL.h index f5e432698317..eefacae99549 100644 --- a/Marlin/src/HAL/LPC1768/HAL.h +++ b/Marlin/src/HAL/LPC1768/HAL.h @@ -28,8 +28,6 @@ #define CPU_32_BIT -void HAL_init(); - #include #include #include @@ -47,12 +45,9 @@ extern "C" volatile uint32_t _millis; #include #include -// -// Default graphical display delays -// -#define CPU_ST7920_DELAY_1 600 -#define CPU_ST7920_DELAY_2 750 -#define CPU_ST7920_DELAY_3 750 +// ------------------------ +// Serial ports +// ------------------------ typedef ForwardSerial1Class< decltype(UsbSerial) > DefaultSerial1; extern DefaultSerial1 USBSerial; @@ -114,26 +109,12 @@ extern DefaultSerial1 USBSerial; // // Interrupts // -#define CRITICAL_SECTION_START() uint32_t primask = __get_PRIMASK(); __disable_irq() -#define CRITICAL_SECTION_END() if (!primask) __enable_irq() -#define ISRS_ENABLED() (!__get_PRIMASK()) -#define ENABLE_ISRS() __enable_irq() -#define DISABLE_ISRS() __disable_irq() - -// -// Utility functions -// -#pragma GCC diagnostic push -#if GCC_VERSION <= 50000 - #pragma GCC diagnostic ignored "-Wunused-function" -#endif -int freeMemory(); - -#pragma GCC diagnostic pop +#define CRITICAL_SECTION_START() const bool irqon = !__get_PRIMASK(); __disable_irq() +#define CRITICAL_SECTION_END() if (irqon) __enable_irq() // -// ADC API +// ADC // #define ADC_MEDIAN_FILTER_SIZE (23) // Higher values increase step delay (phase shift), @@ -152,20 +133,9 @@ int freeMemory(); #define HAL_ADC_RESOLUTION 12 // 15 bit maximum, raw temperature is stored as int16_t #define HAL_ADC_FILTERED // Disable oversampling done in Marlin as ADC values already filtered in HAL -using FilteredADC = LPC176x::ADC; -extern uint32_t HAL_adc_reading; -[[gnu::always_inline]] inline void HAL_adc_start_conversion(const pin_t pin) { - HAL_adc_reading = FilteredADC::read(pin) >> (16 - HAL_ADC_RESOLUTION); // returns 16bit value, reduce to required bits -} -[[gnu::always_inline]] inline uint16_t HAL_adc_get_result() { - return HAL_adc_reading; -} - -#define HAL_adc_init() -#define HAL_ANALOG_SELECT(pin) FilteredADC::enable_channel(pin) -#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin) -#define HAL_READ_ADC() HAL_adc_get_result() -#define HAL_ADC_READY() (true) +// +// Pin Mapping for M42, M43, M226 +// // Test whether the pin is valid constexpr bool VALID_PIN(const pin_t pin) { @@ -192,32 +162,101 @@ int16_t PARSED_PIN_INDEX(const char code, const int16_t dval); // P0.6 thru P0.9 are for the onboard SD card #define HAL_SENSITIVE_PINS P0_06, P0_07, P0_08, P0_09, -#define HAL_IDLETASK 1 -void HAL_idletask(); +// ------------------------ +// Defines +// ------------------------ #define PLATFORM_M997_SUPPORT void flashFirmware(const int16_t); #define HAL_CAN_SET_PWM_FREQ // This HAL supports PWM Frequency adjustment -/** - * set_pwm_frequency - * Set the frequency of the timer corresponding to the provided pin - * All Hardware PWM pins run at the same frequency and all - * Software PWM pins run at the same frequency - */ -void set_pwm_frequency(const pin_t pin, const uint16_t f_desired); +// Default graphical display delays +#define CPU_ST7920_DELAY_1 600 +#define CPU_ST7920_DELAY_2 750 +#define CPU_ST7920_DELAY_3 750 -/** - * set_pwm_duty - * Set the PWM duty cycle of the provided pin to the provided value - * Optionally allows inverting the duty cycle [default = false] - * Optionally allows changing the maximum size of the provided value to enable finer PWM duty control [default = 255] - */ -void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255, const bool invert=false); +// ------------------------ +// Class Utilities +// ------------------------ + +#pragma GCC diagnostic push +#if GCC_VERSION <= 50000 + #pragma GCC diagnostic ignored "-Wunused-function" +#endif + +int freeMemory(); + +#pragma GCC diagnostic pop + +// ------------------------ +// MarlinHAL Class +// ------------------------ + +class MarlinHAL { +public: + + // Earliest possible init, before setup() + MarlinHAL() {} + + static void init(); // Called early in setup() + static void init_board() {} // Called less early in setup() + static void reboot(); // Restart the firmware from 0x0 + + // Interrupts + static bool isr_state() { return !__get_PRIMASK(); } + static void isr_on() { __enable_irq(); } + static void isr_off() { __disable_irq(); } + + static void delay_ms(const int ms) { _delay_ms(ms); } + + // Tasks, called from idle() + static void idletask(); + + // Reset + static uint8_t get_reset_source(); + static void clear_reset_source(); + + // Free SRAM + static int freeMemory() { return ::freeMemory(); } + + // + // ADC Methods + // + + using FilteredADC = LPC176x::ADC; + + // Called by Temperature::init once at startup + static void adc_init() {} + + // Called by Temperature::init for each sensor at startup + static void adc_enable(const pin_t pin) { + FilteredADC::enable_channel(pin); + } + + // Begin ADC sampling on the given pin + static uint32_t adc_result; + static void adc_start(const pin_t pin) { + adc_result = FilteredADC::read(pin) >> (16 - HAL_ADC_RESOLUTION); // returns 16bit value, reduce to required bits + } + + // Is the ADC ready for reading? + static bool adc_ready() { return true; } + + // The current value of the ADC register + static uint16_t adc_value() { return uint16_t(adc_result); } -// Reset source -void HAL_clear_reset_source(void); -uint8_t HAL_get_reset_source(void); + /** + * Set the PWM duty cycle for the pin to the given value. + * Optionally invert the duty cycle [default = false] + * Optionally change the scale of the provided value to enable finer PWM duty control [default = 255] + */ + static void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255, const bool invert=false); -void HAL_reboot(); + /** + * Set the frequency of the timer corresponding to the provided pin + * All Hardware PWM pins will run at the same frequency and + * All Software PWM pins will run at the same frequency + */ + static void set_pwm_frequency(const pin_t pin, const uint16_t f_desired); +}; diff --git a/Marlin/src/HAL/LPC1768/Servo.h b/Marlin/src/HAL/LPC1768/Servo.h index eb12fd20f4d8..f02f503a67da 100644 --- a/Marlin/src/HAL/LPC1768/Servo.h +++ b/Marlin/src/HAL/LPC1768/Servo.h @@ -65,4 +65,5 @@ class libServo: public Servo { } }; -#define HAL_SERVO_LIB libServo +class libServo; +typedef libServo hal_servo_t; diff --git a/Marlin/src/HAL/LPC1768/fast_pwm.cpp b/Marlin/src/HAL/LPC1768/fast_pwm.cpp index ece115aa01ae..6d2b1a9002c1 100644 --- a/Marlin/src/HAL/LPC1768/fast_pwm.cpp +++ b/Marlin/src/HAL/LPC1768/fast_pwm.cpp @@ -21,16 +21,16 @@ */ #ifdef TARGET_LPC1768 -#include "../../inc/MarlinConfigPre.h" +#include "../../inc/MarlinConfig.h" #include -void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) { +void MarlinHAL::set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) { if (!LPC176x::pin_is_valid(pin)) return; if (LPC176x::pwm_attach_pin(pin)) LPC176x::pwm_write_ratio(pin, invert ? 1.0f - (float)v / v_size : (float)v / v_size); // map 1-254 onto PWM range } -void set_pwm_frequency(const pin_t pin, const uint16_t f_desired) { +void MarlinHAL::set_pwm_frequency(const pin_t pin, const uint16_t f_desired) { LPC176x::pwm_set_frequency(pin, f_desired); } diff --git a/Marlin/src/HAL/LPC1768/main.cpp b/Marlin/src/HAL/LPC1768/main.cpp index ef0dc42c78ca..419c99793fb8 100644 --- a/Marlin/src/HAL/LPC1768/main.cpp +++ b/Marlin/src/HAL/LPC1768/main.cpp @@ -48,7 +48,7 @@ void SysTick_Callback() { disk_timerproc(); } TERN_(POSTMORTEM_DEBUGGING, extern void install_min_serial()); -void HAL_init() { +void MarlinHAL::init() { // Init LEDs #if PIN_EXISTS(LED) @@ -130,7 +130,7 @@ void HAL_init() { const millis_t usb_timeout = millis() + 2000; while (!USB_Configuration && PENDING(millis(), usb_timeout)) { delay(50); - HAL_idletask(); + idletask(); #if PIN_EXISTS(LED) TOGGLE(LED_PIN); // Flash quickly during USB initialization #endif @@ -142,7 +142,7 @@ void HAL_init() { } // HAL idle task -void HAL_idletask() { +void MarlinHAL::idletask() { #if HAS_SHARED_MEDIA // If Marlin is using the SD card we need to lock it to prevent access from // a PC via USB. diff --git a/Marlin/src/HAL/LPC1768/timers.h b/Marlin/src/HAL/LPC1768/timers.h index 78e856db2857..c6d7bc632e2e 100644 --- a/Marlin/src/HAL/LPC1768/timers.h +++ b/Marlin/src/HAL/LPC1768/timers.h @@ -170,4 +170,4 @@ FORCE_INLINE static void HAL_timer_isr_prologue(const uint8_t timer_num) { } } -#define HAL_timer_isr_epilogue(T) +#define HAL_timer_isr_epilogue(T) NOOP diff --git a/Marlin/src/HAL/NATIVE_SIM/HAL.h b/Marlin/src/HAL/NATIVE_SIM/HAL.h index 436b4b4daa26..ee2e31fc7fa4 100644 --- a/Marlin/src/HAL/NATIVE_SIM/HAL.h +++ b/Marlin/src/HAL/NATIVE_SIM/HAL.h @@ -21,18 +21,10 @@ */ #pragma once -#define CPU_32_BIT -#define HAL_IDLETASK -void HAL_idletask(); - -#define F_CPU 100000000 -#define SystemCoreClock F_CPU #include #include - #undef min #undef max - #include #include "pinmapping.h" @@ -40,8 +32,6 @@ void _printf (const char *format, ...); void _putc(uint8_t c); uint8_t _getc(); -//extern "C" volatile uint32_t _millis; - //arduino: Print.h #define DEC 10 #define HEX 16 @@ -58,7 +48,23 @@ uint8_t _getc(); #include "watchdog.h" #include "serial.h" -#define SHARED_SERVOS HAS_SERVOS +// ------------------------ +// Defines +// ------------------------ + +#define CPU_32_BIT +#define SHARED_SERVOS HAS_SERVOS // Use shared/servos.cpp + +#define F_CPU 100000000 +#define SystemCoreClock F_CPU + +#define CPU_ST7920_DELAY_1 600 +#define CPU_ST7920_DELAY_2 750 +#define CPU_ST7920_DELAY_3 750 + +// ------------------------ +// Serial ports +// ------------------------ extern MSerialT serial_stream_0; extern MSerialT serial_stream_1; @@ -98,49 +104,19 @@ extern MSerialT serial_stream_3; #endif #endif - -#define CPU_ST7920_DELAY_1 600 -#define CPU_ST7920_DELAY_2 750 -#define CPU_ST7920_DELAY_3 750 - -// +// ------------------------ // Interrupts -// +// ------------------------ + #define CRITICAL_SECTION_START() #define CRITICAL_SECTION_END() -#define ISRS_ENABLED() -#define ENABLE_ISRS() -#define DISABLE_ISRS() - -inline void HAL_init() {} - -// Utility functions -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wunused-function" -int freeMemory(); -#pragma GCC diagnostic pop +// ------------------------ // ADC +// ------------------------ + #define HAL_ADC_VREF 5.0 #define HAL_ADC_RESOLUTION 10 -#define HAL_ANALOG_SELECT(ch) HAL_adc_enable_channel(ch) -#define HAL_START_ADC(ch) HAL_adc_start_conversion(ch) -#define HAL_READ_ADC() HAL_adc_get_result() -#define HAL_ADC_READY() true - -void HAL_adc_init(); -void HAL_adc_enable_channel(const uint8_t ch); -void HAL_adc_start_conversion(const uint8_t ch); -uint16_t HAL_adc_get_result(); - -// PWM -inline void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) { analogWrite(pin, v); } - -// Reset source -inline void HAL_clear_reset_source(void) {} -inline uint8_t HAL_get_reset_source(void) { return RST_POWER_ON; } - -void HAL_reboot(); /* ---------------- Delay in cycles */ @@ -159,29 +135,22 @@ constexpr inline std::size_t strlen_constexpr(const char* str) { // https://github.com/gcc-mirror/gcc/blob/5c7634a0e5f202935aa6c11b6ea953b8bf80a00a/libstdc%2B%2B-v3/include/bits/char_traits.h#L329 if (str != nullptr) { std::size_t i = 0; - while (str[i] != '\0') { - ++i; - } - + while (str[i] != '\0') ++i; return i; } - return 0; } constexpr inline int strncmp_constexpr(const char* lhs, const char* rhs, std::size_t count) { // https://github.com/gcc-mirror/gcc/blob/13b9cbfc32fe3ac4c81c4dd9c42d141c8fb95db4/libstdc%2B%2B-v3/include/bits/char_traits.h#L655 - if (lhs == nullptr || rhs == nullptr) { + if (lhs == nullptr || rhs == nullptr) return rhs != nullptr ? -1 : 1; - } - for (std::size_t i = 0; i < count; ++i) { - if (lhs[i] != rhs[i]) { + for (std::size_t i = 0; i < count; ++i) + if (lhs[i] != rhs[i]) return lhs[i] < rhs[i] ? -1 : 1; - } else if (lhs[i] == '\0') { + else if (lhs[i] == '\0') return 0; - } - } return 0; } @@ -193,14 +162,11 @@ constexpr inline const char* strstr_constexpr(const char* str, const char* targe do { char sc = {}; do { - if ((sc = *str++) == '\0') { - return nullptr; - } + if ((sc = *str++) == '\0') return nullptr; } while (sc != c); } while (strncmp_constexpr(str, target, len) != 0); --str; } - return str; } @@ -211,12 +177,87 @@ constexpr inline char* strstr_constexpr(char* str, const char* target) { do { char sc = {}; do { - if ((sc = *str++) == '\0') { - return nullptr; - } + if ((sc = *str++) == '\0') return nullptr; } while (sc != c); } while (strncmp_constexpr(str, target, len) != 0); --str; } return str; } + +// ------------------------ +// Class Utilities +// ------------------------ + +#pragma GCC diagnostic push +#if GCC_VERSION <= 50000 + #pragma GCC diagnostic ignored "-Wunused-function" +#endif + +int freeMemory(); + +#pragma GCC diagnostic pop + +// ------------------------ +// MarlinHAL Class +// ------------------------ + +class MarlinHAL { +public: + + // Earliest possible init, before setup() + MarlinHAL() {} + + static void init() {} // Called early in setup() + static void init_board() {} // Called less early in setup() + static void reboot(); // Restart the firmware from 0x0 + + // Interrupts + static bool isr_state() { return true; } + static void isr_on() {} + static void isr_off() {} + + static void delay_ms(const int ms) { _delay_ms(ms); } + + // Tasks, called from idle() + static void idletask(); + + // Reset + static constexpr uint8_t reset_reason = RST_POWER_ON; + static uint8_t get_reset_source() { return reset_reason; } + static void clear_reset_source() {} + + // Free SRAM + static int freeMemory() { return ::freeMemory(); } + + // + // ADC Methods + // + + static uint8_t active_ch; + + // Called by Temperature::init once at startup + static void adc_init(); + + // Called by Temperature::init for each sensor at startup + static void adc_enable(const uint8_t ch); + + // Begin ADC sampling on the given channel + static void adc_start(const uint8_t ch); + + // Is the ADC ready for reading? + static bool adc_ready(); + + // The current value of the ADC register + static uint16_t adc_value(); + + /** + * Set the PWM duty cycle for the pin to the given value. + * No option to invert the duty cycle [default = false] + * No option to change the scale of the provided value to enable finer PWM duty control [default = 255] + */ + static void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) { + analogWrite(pin, v); + } + +}; diff --git a/Marlin/src/HAL/NATIVE_SIM/timers.h b/Marlin/src/HAL/NATIVE_SIM/timers.h index cedfdb62d631..be38d583b686 100644 --- a/Marlin/src/HAL/NATIVE_SIM/timers.h +++ b/Marlin/src/HAL/NATIVE_SIM/timers.h @@ -87,5 +87,5 @@ void HAL_timer_enable_interrupt(const uint8_t timer_num); void HAL_timer_disable_interrupt(const uint8_t timer_num); bool HAL_timer_interrupt_enabled(const uint8_t timer_num); -#define HAL_timer_isr_prologue(T) -#define HAL_timer_isr_epilogue(T) +#define HAL_timer_isr_prologue(T) NOOP +#define HAL_timer_isr_epilogue(T) NOOP diff --git a/Marlin/src/HAL/SAMD51/HAL.cpp b/Marlin/src/HAL/SAMD51/HAL.cpp index a5febad83be1..14b6a437dccc 100644 --- a/Marlin/src/HAL/SAMD51/HAL.cpp +++ b/Marlin/src/HAL/SAMD51/HAL.cpp @@ -42,10 +42,6 @@ #endif #endif -// ------------------------ -// Local defines -// ------------------------ - #define GET_TEMP_0_ADC() TERN(HAS_TEMP_ADC_0, PIN_TO_ADC(TEMP_0_PIN), -1) #define GET_TEMP_1_ADC() TERN(HAS_TEMP_ADC_1, PIN_TO_ADC(TEMP_1_PIN), -1) #define GET_TEMP_2_ADC() TERN(HAS_TEMP_ADC_2, PIN_TO_ADC(TEMP_2_PIN), -1) @@ -61,17 +57,21 @@ #define GET_BOARD_ADC() TERN(HAS_TEMP_ADC_BOARD, PIN_TO_ADC(TEMP_BOARD_PIN), -1) #define GET_FILAMENT_WIDTH_ADC() TERN(FILAMENT_WIDTH_SENSOR, PIN_TO_ADC(FILWIDTH_PIN), -1) #define GET_BUTTONS_ADC() TERN(HAS_ADC_BUTTONS, PIN_TO_ADC(ADC_KEYPAD_PIN), -1) +#define GET_JOY_ADC_X() TERN(HAS_JOY_ADC_X, PIN_TO_ADC(JOY_X_PIN), -1) +#define GET_JOY_ADC_Y() TERN(HAS_JOY_ADC_Y, PIN_TO_ADC(JOY_Y_PIN), -1) +#define GET_JOY_ADC_Z() TERN(HAS_JOY_ADC_Z, PIN_TO_ADC(JOY_Z_PIN), -1) #define IS_ADC_REQUIRED(n) ( \ GET_TEMP_0_ADC() == n || GET_TEMP_1_ADC() == n || GET_TEMP_2_ADC() == n || GET_TEMP_3_ADC() == n \ || GET_TEMP_4_ADC() == n || GET_TEMP_5_ADC() == n || GET_TEMP_6_ADC() == n || GET_TEMP_7_ADC() == n \ - || GET_BED_ADC() == n \ - || GET_CHAMBER_ADC() == n \ - || GET_PROBE_ADC() == n \ - || GET_COOLER_ADC() == n \ - || GET_BOARD_ADC() == n \ + || GET_BED_ADC() == n \ + || GET_CHAMBER_ADC() == n \ + || GET_PROBE_ADC() == n \ + || GET_COOLER_ADC() == n \ + || GET_BOARD_ADC() == n \ || GET_FILAMENT_WIDTH_ADC() == n \ - || GET_BUTTONS_ADC() == n \ + || GET_BUTTONS_ADC() == n \ + || GET_JOY_ADC_X() == n || GET_JOY_ADC_Y() == n || GET_JOY_ADC_Z() == n \ ) #if IS_ADC_REQUIRED(0) @@ -91,6 +91,118 @@ #define DMA_IS_REQUIRED 1 #endif +enum ADCIndex { + #if GET_TEMP_0_ADC() == 0 + TEMP_0, + #endif + #if GET_TEMP_1_ADC() == 0 + TEMP_1, + #endif + #if GET_TEMP_2_ADC() == 0 + TEMP_2, + #endif + #if GET_TEMP_3_ADC() == 0 + TEMP_3, + #endif + #if GET_TEMP_4_ADC() == 0 + TEMP_4, + #endif + #if GET_TEMP_5_ADC() == 0 + TEMP_5, + #endif + #if GET_TEMP_6_ADC() == 0 + TEMP_6, + #endif + #if GET_TEMP_7_ADC() == 0 + TEMP_7, + #endif + #if GET_BED_ADC() == 0 + TEMP_BED, + #endif + #if GET_CHAMBER_ADC() == 0 + TEMP_CHAMBER, + #endif + #if GET_PROBE_ADC() == 0 + TEMP_PROBE, + #endif + #if GET_COOLER_ADC() == 0 + TEMP_COOLER, + #endif + #if GET_BOARD_ADC() == 0 + TEMP_BOARD, + #endif + #if GET_FILAMENT_WIDTH_ADC() == 0 + FILWIDTH, + #endif + #if GET_BUTTONS_ADC() == 0 + ADC_KEY, + #endif + #if GET_JOY_ADC_X() == 0 + JOY_X, + #endif + #if GET_JOY_ADC_Y() == 0 + JOY_Y, + #endif + #if GET_JOY_ADC_Z() == 0 + JOY_Z, + #endif + #if GET_TEMP_0_ADC() == 1 + TEMP_0, + #endif + #if GET_TEMP_1_ADC() == 1 + TEMP_1, + #endif + #if GET_TEMP_2_ADC() == 1 + TEMP_2, + #endif + #if GET_TEMP_3_ADC() == 1 + TEMP_3, + #endif + #if GET_TEMP_4_ADC() == 1 + TEMP_4, + #endif + #if GET_TEMP_5_ADC() == 1 + TEMP_5, + #endif + #if GET_TEMP_6_ADC() == 1 + TEMP_6, + #endif + #if GET_TEMP_7_ADC() == 1 + TEMP_7, + #endif + #if GET_BED_ADC() == 1 + TEMP_BED, + #endif + #if GET_CHAMBER_ADC() == 1 + TEMP_CHAMBER, + #endif + #if GET_PROBE_ADC() == 1 + TEMP_PROBE, + #endif + #if GET_COOLER_ADC() == 1 + TEMP_COOLER, + #endif + #if GET_BOARD_ADC() == 1 + TEMP_BOARD, + #endif + #if GET_FILAMENT_WIDTH_ADC() == 1 + FILWIDTH, + #endif + #if GET_BUTTONS_ADC() == 1 + ADC_KEY, + #endif + #if GET_JOY_ADC_X() == 1 + JOY_X, + #endif + #if GET_JOY_ADC_Y() == 1 + JOY_Y, + #endif + #if GET_JOY_ADC_Z() == 1 + JOY_Z, + #endif + ADC_COUNT +}; + // ------------------------ // Types // ------------------------ @@ -108,12 +220,10 @@ // Private Variables // ------------------------ -uint16_t HAL_adc_result; - #if ADC_IS_REQUIRED // Pins used by ADC inputs. Order must be ADC0 inputs first then ADC1 - const uint8_t adc_pins[] = { + static constexpr uint8_t adc_pins[ADC_COUNT] = { // ADC0 pins #if GET_TEMP_0_ADC() == 0 TEMP_0_PIN, @@ -160,6 +270,15 @@ uint16_t HAL_adc_result; #if GET_BUTTONS_ADC() == 0 ADC_KEYPAD_PIN, #endif + #if GET_JOY_ADC_X() == 0 + JOY_X_PIN, + #endif + #if GET_JOY_ADC_Y() == 0 + JOY_Y_PIN, + #endif + #if GET_JOY_ADC_Z() == 0 + JOY_Z_PIN, + #endif // ADC1 pins #if GET_TEMP_0_ADC() == 1 TEMP_0_PIN, @@ -206,15 +325,23 @@ uint16_t HAL_adc_result; #if GET_BUTTONS_ADC() == 1 ADC_KEYPAD_PIN, #endif + #if GET_JOY_ADC_X() == 1 + JOY_X_PIN, + #endif + #if GET_JOY_ADC_Y() == 1 + JOY_Y_PIN, + #endif + #if GET_JOY_ADC_Z() == 1 + JOY_Z_PIN, + #endif }; - uint16_t HAL_adc_results[COUNT(adc_pins)]; + static uint16_t adc_results[ADC_COUNT]; #if ADC0_IS_REQUIRED - Adafruit_ZeroDMA adc0DMAProgram, - adc0DMARead; + Adafruit_ZeroDMA adc0DMAProgram, adc0DMARead; - const HAL_DMA_DAC_Registers adc0_dma_regs_list[] = { + static constexpr HAL_DMA_DAC_Registers adc0_dma_regs_list[ADC_COUNT] = { #if GET_TEMP_0_ADC() == 0 { PIN_TO_INPUTCTRL(TEMP_0_PIN) }, #endif @@ -260,16 +387,24 @@ uint16_t HAL_adc_result; #if GET_BUTTONS_ADC() == 0 { PIN_TO_INPUTCTRL(ADC_KEYPAD_PIN) }, #endif + #if GET_JOY_ADC_X() == 0 + { PIN_TO_INPUTCTRL(JOY_X_PIN) }, + #endif + #if GET_JOY_ADC_Y() == 0 + { PIN_TO_INPUTCTRL(JOY_Y_PIN) }, + #endif + #if GET_JOY_ADC_Z() == 0 + { PIN_TO_INPUTCTRL(JOY_Z_PIN) }, + #endif }; #define ADC0_AINCOUNT COUNT(adc0_dma_regs_list) #endif // ADC0_IS_REQUIRED #if ADC1_IS_REQUIRED - Adafruit_ZeroDMA adc1DMAProgram, - adc1DMARead; + Adafruit_ZeroDMA adc1DMAProgram, adc1DMARead; - const HAL_DMA_DAC_Registers adc1_dma_regs_list[] = { + static constexpr HAL_DMA_DAC_Registers adc1_dma_regs_list[ADC_COUNT] = { #if GET_TEMP_0_ADC() == 1 { PIN_TO_INPUTCTRL(TEMP_0_PIN) }, #endif @@ -315,6 +450,15 @@ uint16_t HAL_adc_result; #if GET_BUTTONS_ADC() == 1 { PIN_TO_INPUTCTRL(ADC_KEYPAD_PIN) }, #endif + #if GET_JOY_ADC_X() == 1 + { PIN_TO_INPUTCTRL(JOY_X_PIN) }, + #endif + #if GET_JOY_ADC_Y() == 1 + { PIN_TO_INPUTCTRL(JOY_Y_PIN) }, + #endif + #if GET_JOY_ADC_Z() == 1 + { PIN_TO_INPUTCTRL(JOY_Z_PIN) }, + #endif }; #define ADC1_AINCOUNT COUNT(adc1_dma_regs_list) @@ -326,9 +470,10 @@ uint16_t HAL_adc_result; // Private functions // ------------------------ -#if DMA_IS_REQUIRED +void MarlinHAL::dma_init() { + + #if DMA_IS_REQUIRED - void dma_init() { DmacDescriptor *descriptor; #if ADC0_IS_REQUIRED @@ -357,7 +502,7 @@ uint16_t HAL_adc_result; if (adc0DMARead.allocate() == DMA_STATUS_OK) { adc0DMARead.addDescriptor( (void *)&ADC0->RESULT.reg, // SRC - &HAL_adc_results, // DEST + &adc_results, // DEST ADC0_AINCOUNT, // CNT DMA_BEAT_SIZE_HWORD, false, // SRCINC @@ -394,7 +539,7 @@ uint16_t HAL_adc_result; if (adc1DMARead.allocate() == DMA_STATUS_OK) { adc1DMARead.addDescriptor( (void *)&ADC1->RESULT.reg, // SRC - &HAL_adc_results[ADC0_AINCOUNT], // DEST + &adc_results[ADC0_AINCOUNT], // DEST ADC1_AINCOUNT, // CNT DMA_BEAT_SIZE_HWORD, false, // SRCINC @@ -407,16 +552,16 @@ uint16_t HAL_adc_result; #endif DMAC->PRICTRL0.bit.RRLVLEN0 = true; // Activate round robin for DMA channels required by ADCs - } -#endif // DMA_IS_REQUIRED + #endif // DMA_IS_REQUIRED +} // ------------------------ // Public functions // ------------------------ // HAL initialization task -void HAL_init() { +void MarlinHAL::init() { TERN_(DMA_IS_REQUIRED, dma_init()); #if ENABLED(SDSUPPORT) #if SD_CONNECTION_IS(ONBOARD) && PIN_EXISTS(SD_DETECT) @@ -426,17 +571,9 @@ void HAL_init() { #endif } -// HAL idle task -/* -void HAL_idletask() { -} -*/ - -void HAL_clear_reset_source() { } - #pragma push_macro("WDT") #undef WDT // Required to be able to use '.bit.WDT'. Compiler wrongly replace struct field with WDT define -uint8_t HAL_get_reset_source() { +uint8_t MarlinHAL::get_reset_source() { RSTC_RCAUSE_Type resetCause; resetCause.reg = REG_RSTC_RCAUSE; @@ -450,7 +587,7 @@ uint8_t HAL_get_reset_source() { } #pragma pop_macro("WDT") -void HAL_reboot() { NVIC_SystemReset(); } +void MarlinHAL::reboot() { NVIC_SystemReset(); } extern "C" { void * _sbrk(int incr); @@ -468,9 +605,11 @@ int freeMemory() { // ADC // ------------------------ -void HAL_adc_init() { +uint16_t MarlinHAL::adc_result; + +void MarlinHAL::adc_init() { #if ADC_IS_REQUIRED - memset(HAL_adc_results, 0xFF, sizeof(HAL_adc_results)); // Fill result with invalid values + memset(adc_results, 0xFF, sizeof(adc_results)); // Fill result with invalid values LOOP_L_N(pi, COUNT(adc_pins)) pinPeripheral(adc_pins[pi], PIO_ANALOG); @@ -505,17 +644,13 @@ void HAL_adc_init() { #endif // ADC_IS_REQUIRED } -void HAL_adc_start_conversion(const uint8_t adc_pin) { +void MarlinHAL::adc_start(const pin_t pin) { #if ADC_IS_REQUIRED - LOOP_L_N(pi, COUNT(adc_pins)) { - if (adc_pin == adc_pins[pi]) { - HAL_adc_result = HAL_adc_results[pi]; - return; - } - } + LOOP_L_N(pi, COUNT(adc_pins)) + if (pin == adc_pins[pi]) { adc_result = adc_results[pi]; return; } #endif - HAL_adc_result = 0xFFFF; + adc_result = 0xFFFF; } #endif // __SAMD51__ diff --git a/Marlin/src/HAL/SAMD51/HAL.h b/Marlin/src/HAL/SAMD51/HAL.h index c262752a8d66..3b09a885a53b 100644 --- a/Marlin/src/HAL/SAMD51/HAL.h +++ b/Marlin/src/HAL/SAMD51/HAL.h @@ -89,51 +89,30 @@ typedef int8_t pin_t; -#define SHARED_SERVOS HAS_SERVOS -#define HAL_SERVO_LIB Servo +#define SHARED_SERVOS HAS_SERVOS // Use shared/servos.cpp + +class Servo; +typedef Servo hal_servo_t; // // Interrupts // -#define CRITICAL_SECTION_START() uint32_t primask = __get_PRIMASK(); __disable_irq() -#define CRITICAL_SECTION_END() if (!primask) __enable_irq() -#define ISRS_ENABLED() (!__get_PRIMASK()) -#define ENABLE_ISRS() __enable_irq() -#define DISABLE_ISRS() __disable_irq() - -#define cli() __disable_irq() // Disable interrupts -#define sei() __enable_irq() // Enable interrupts - -void HAL_clear_reset_source(); // clear reset reason -uint8_t HAL_get_reset_source(); // get reset reason +#define CRITICAL_SECTION_START() const bool irqon = !__get_PRIMASK(); __disable_irq() +#define CRITICAL_SECTION_END() if (irqon) __enable_irq() -void HAL_reboot(); +#define cli() __disable_irq() // Disable interrupts +#define sei() __enable_irq() // Enable interrupts // // ADC // -extern uint16_t HAL_adc_result; // Most recent ADC conversion - -#define HAL_ANALOG_SELECT(pin) - -void HAL_adc_init(); //#define HAL_ADC_FILTERED // Disable Marlin's oversampling. The HAL filters ADC values. #define HAL_ADC_VREF 3.3 #define HAL_ADC_RESOLUTION 10 // ... 12 -#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin) -#define HAL_READ_ADC() HAL_adc_result -#define HAL_ADC_READY() true -void HAL_adc_start_conversion(const uint8_t adc_pin); - -// -// PWM // -inline void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) { analogWrite(pin, v); } - -// -// Pin Map +// Pin Mapping for M42, M43, M226 // #define GET_PIN_MAP_PIN(index) index #define GET_PIN_MAP_INDEX(pin) pin @@ -142,35 +121,93 @@ inline void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, // // Tone // -void toneInit(); void tone(const pin_t _pin, const unsigned int frequency, const unsigned long duration=0); void noTone(const pin_t _pin); -// Enable hooks into idle and setup for HAL -void HAL_init(); -/* -#define HAL_IDLETASK 1 -void HAL_idletask(); -*/ - -// -// Utility functions -// -FORCE_INLINE void _delay_ms(const int delay_ms) { delay(delay_ms); } +// ------------------------ +// Class Utilities +// ------------------------ #pragma GCC diagnostic push #if GCC_VERSION <= 50000 #pragma GCC diagnostic ignored "-Wunused-function" #endif -int freeMemory(); - -#pragma GCC diagnostic pop - #ifdef __cplusplus extern "C" { #endif + char *dtostrf(double __val, signed char __width, unsigned char __prec, char *__s); + +extern "C" int freeMemory(); + #ifdef __cplusplus } #endif + +#pragma GCC diagnostic pop + +// ------------------------ +// MarlinHAL Class +// ------------------------ + +class MarlinHAL { +public: + + // Earliest possible init, before setup() + MarlinHAL() {} + + static void init(); // Called early in setup() + static void init_board() {} // Called less early in setup() + static void reboot(); // Restart the firmware from 0x0 + + // Interrupts + static bool isr_state() { return !__get_PRIMASK(); } + static void isr_on() { sei(); } + static void isr_off() { cli(); } + + static void delay_ms(const int ms) { delay(ms); } + + // Tasks, called from idle() + static void idletask() {} + + // Reset + static uint8_t get_reset_source(); + static void clear_reset_source() {} + + // Free SRAM + static int freeMemory() { return ::freeMemory(); } + + // + // ADC Methods + // + + static uint16_t adc_result; + + // Called by Temperature::init once at startup + static void adc_init(); + + // Called by Temperature::init for each sensor at startup + static void adc_enable(const uint8_t ch) {} + + // Begin ADC sampling on the given channel + static void adc_start(const pin_t pin); + + // Is the ADC ready for reading? + static bool adc_ready() { return true; } + + // The current value of the ADC register + static uint16_t adc_value() { return adc_result; } + + /** + * Set the PWM duty cycle for the pin to the given value. + * No option to invert the duty cycle [default = false] + * No option to change the scale of the provided value to enable finer PWM duty control [default = 255] + */ + static void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) { + analogWrite(pin, v); + } + +private: + static void dma_init(); +}; diff --git a/Marlin/src/HAL/STM32/HAL.cpp b/Marlin/src/HAL/STM32/HAL.cpp index 0920a72ec1bc..324a78316a2d 100644 --- a/Marlin/src/HAL/STM32/HAL.cpp +++ b/Marlin/src/HAL/STM32/HAL.cpp @@ -53,16 +53,18 @@ // Public Variables // ------------------------ -uint16_t HAL_adc_result; +uint16_t MarlinHAL::adc_result; // ------------------------ // Public functions // ------------------------ -TERN_(POSTMORTEM_DEBUGGING, extern void install_min_serial()); +#if ENABLED(POSTMORTEM_DEBUGGING) + extern void install_min_serial(); +#endif // HAL initialization task -void HAL_init() { +void MarlinHAL::init() { // Ensure F_CPU is a constant expression. // If the compiler breaks here, it means that delay code that should compute at compile time will not work. // So better safe than sorry here. @@ -103,7 +105,7 @@ void HAL_init() { } // HAL idle task -void HAL_idletask() { +void MarlinHAL::idletask() { #if HAS_SHARED_MEDIA // Stm32duino currently doesn't have a "loop/idle" method CDC_resume_receive(); @@ -111,9 +113,9 @@ void HAL_idletask() { #endif } -void HAL_clear_reset_source() { __HAL_RCC_CLEAR_RESET_FLAGS(); } +void MarlinHAL::reboot() { NVIC_SystemReset(); } -uint8_t HAL_get_reset_source() { +uint8_t MarlinHAL::get_reset_source() { return #ifdef RCC_FLAG_IWDGRST // Some sources may not exist... RESET != __HAL_RCC_GET_FLAG(RCC_FLAG_IWDGRST) ? RST_WATCHDOG : @@ -137,24 +139,14 @@ uint8_t HAL_get_reset_source() { ; } -void HAL_reboot() { NVIC_SystemReset(); } - -void _delay_ms(const int delay_ms) { delay(delay_ms); } +void MarlinHAL::clear_reset_source() { __HAL_RCC_CLEAR_RESET_FLAGS(); } extern "C" { extern unsigned int _ebss; // end of bss section } -// ------------------------ -// ADC -// ------------------------ - -// TODO: Make sure this doesn't cause any delay -void HAL_adc_start_conversion(const uint8_t adc_pin) { HAL_adc_result = analogRead(adc_pin); } -uint16_t HAL_adc_get_result() { return HAL_adc_result; } - // Reset the system to initiate a firmware flash -WEAK void flashFirmware(const int16_t) { HAL_reboot(); } +WEAK void flashFirmware(const int16_t) { hal.reboot(); } // Maple Compatibility volatile uint32_t systick_uptime_millis = 0; diff --git a/Marlin/src/HAL/STM32/HAL.h b/Marlin/src/HAL/STM32/HAL.h index 9429bb7e7ca7..f5e8c1187da7 100644 --- a/Marlin/src/HAL/STM32/HAL.h +++ b/Marlin/src/HAL/STM32/HAL.h @@ -44,9 +44,9 @@ #define CPU_ST7920_DELAY_2 40 #define CPU_ST7920_DELAY_3 340 -// -// Serial Ports -// +// ------------------------ +// Serial ports +// ------------------------ #ifdef USBCON #include #include "../../core/serial_hook.h" @@ -115,17 +115,14 @@ #define analogInputToDigitalPin(p) (p) #endif -#define CRITICAL_SECTION_START() uint32_t primask = __get_PRIMASK(); __disable_irq() -#define CRITICAL_SECTION_END() if (!primask) __enable_irq() -#define ISRS_ENABLED() (!__get_PRIMASK()) -#define ENABLE_ISRS() __enable_irq() -#define DISABLE_ISRS() __disable_irq() +// +// Interrupts +// +#define CRITICAL_SECTION_START() const bool irqon = !__get_PRIMASK(); __disable_irq() +#define CRITICAL_SECTION_END() if (irqon) __enable_irq() #define cli() __disable_irq() #define sei() __enable_irq() -// On AVR this is in math.h? -#define square(x) ((x)*(x)) - // ------------------------ // Types // ------------------------ @@ -136,43 +133,61 @@ typedef int16_t pin_t; #endif -#define HAL_SERVO_LIB libServo +class libServo; +typedef libServo hal_servo_t; #define PAUSE_SERVO_OUTPUT() libServo::pause_all_servos() #define RESUME_SERVO_OUTPUT() libServo::resume_all_servos() // ------------------------ -// Public Variables +// ADC // ------------------------ -// result of last ADC conversion -extern uint16_t HAL_adc_result; +#ifdef ADC_RESOLUTION + #define HAL_ADC_RESOLUTION ADC_RESOLUTION +#else + #define HAL_ADC_RESOLUTION 12 +#endif -// ------------------------ -// Public functions -// ------------------------ +#define HAL_ADC_VREF 3.3 -// Memory related -#define __bss_end __bss_end__ +// +// Pin Mapping for M42, M43, M226 +// +#define GET_PIN_MAP_PIN(index) index +#define GET_PIN_MAP_INDEX(pin) pin +#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval) -// Enable hooks into setup for HAL -void HAL_init(); -#define HAL_IDLETASK 1 -void HAL_idletask(); +#ifdef STM32F1xx + #define JTAG_DISABLE() AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_JTAGDISABLE) + #define JTAGSWD_DISABLE() AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_DISABLE) + #define JTAGSWD_RESET() AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_RESET); // Reset: FULL SWD+JTAG +#endif -// Clear reset reason -void HAL_clear_reset_source(); +#define PLATFORM_M997_SUPPORT +void flashFirmware(const int16_t); -// Reset reason -uint8_t HAL_get_reset_source(); +// Maple Compatibility +typedef void (*systickCallback_t)(void); +void systick_attach_callback(systickCallback_t cb); +void HAL_SYSTICK_Callback(); -void HAL_reboot(); +extern volatile uint32_t systick_uptime_millis; + +#define HAL_CAN_SET_PWM_FREQ // This HAL supports PWM Frequency adjustment + +// ------------------------ +// Class Utilities +// ------------------------ -void _delay_ms(const int delay); +// Memory related +#define __bss_end __bss_end__ extern "C" char* _sbrk(int incr); #pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wunused-function" +#if GCC_VERSION <= 50000 + #pragma GCC diagnostic ignored "-Wunused-function" +#endif static inline int freeMemory() { volatile char top; @@ -181,62 +196,71 @@ static inline int freeMemory() { #pragma GCC diagnostic pop -// -// ADC -// +// ------------------------ +// MarlinHAL Class +// ------------------------ -#define HAL_ANALOG_SELECT(pin) pinMode(pin, INPUT) +class MarlinHAL { +public: -#ifdef ADC_RESOLUTION - #define HAL_ADC_RESOLUTION ADC_RESOLUTION -#else - #define HAL_ADC_RESOLUTION 12 -#endif + // Earliest possible init, before setup() + MarlinHAL() {} -#define HAL_ADC_VREF 3.3 -#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin) -#define HAL_READ_ADC() HAL_adc_result -#define HAL_ADC_READY() true + static void init(); // Called early in setup() + static void init_board() {} // Called less early in setup() + static void reboot(); // Restart the firmware from 0x0 -inline void HAL_adc_init() { analogReadResolution(HAL_ADC_RESOLUTION); } + // Interrupts + static bool isr_state() { return !__get_PRIMASK(); } + static void isr_on() { sei(); } + static void isr_off() { cli(); } -void HAL_adc_start_conversion(const uint8_t adc_pin); + static void delay_ms(const int ms) { delay(ms); } -uint16_t HAL_adc_get_result(); + // Tasks, called from idle() + static void idletask(); -#define GET_PIN_MAP_PIN(index) index -#define GET_PIN_MAP_INDEX(pin) pin -#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval) + // Reset + static uint8_t get_reset_source(); + static void clear_reset_source(); -#ifdef STM32F1xx - #define JTAG_DISABLE() AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_JTAGDISABLE) - #define JTAGSWD_DISABLE() AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_DISABLE) - #define JTAGSWD_RESET() AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_RESET); // Reset: FULL SWD+JTAG -#endif + // Free SRAM + static int freeMemory() { return ::freeMemory(); } -#define PLATFORM_M997_SUPPORT -void flashFirmware(const int16_t); + // + // ADC Methods + // -// Maple Compatibility -typedef void (*systickCallback_t)(void); -void systick_attach_callback(systickCallback_t cb); -void HAL_SYSTICK_Callback(); + static uint16_t adc_result; -extern volatile uint32_t systick_uptime_millis; + // Called by Temperature::init once at startup + static void adc_init() { + analogReadResolution(HAL_ADC_RESOLUTION); + } -#define HAL_CAN_SET_PWM_FREQ // This HAL supports PWM Frequency adjustment + // Called by Temperature::init for each sensor at startup + static void adc_enable(const pin_t pin) { pinMode(pin, INPUT); } -/** - * set_pwm_frequency - * Set the frequency of the timer corresponding to the provided pin - * All Timer PWM pins run at the same frequency - */ -void set_pwm_frequency(const pin_t pin, const uint16_t f_desired); + // Begin ADC sampling on the given channel + static void adc_start(const pin_t pin) { adc_result = analogRead(pin); } -/** - * set_pwm_duty - * Set the PWM duty cycle of the provided pin to the provided value - * Optionally allows inverting the duty cycle [default = false] - * Optionally allows changing the maximum size of the provided value to enable finer PWM duty control [default = 255] - */ -void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255, const bool invert=false); + // Is the ADC ready for reading? + static bool adc_ready() { return true; } + + // The current value of the ADC register + static uint16_t adc_value() { return adc_result; } + + /** + * Set the PWM duty cycle for the pin to the given value. + * Optionally invert the duty cycle [default = false] + * Optionally change the maximum size of the provided value to enable finer PWM duty control [default = 255] + */ + static void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255, const bool invert=false); + + /** + * Set the frequency of the timer for the given pin. + * All Timer PWM pins run at the same frequency. + */ + static void set_pwm_frequency(const pin_t pin, const uint16_t f_desired); + +}; diff --git a/Marlin/src/HAL/STM32/HAL_SPI.cpp b/Marlin/src/HAL/STM32/HAL_SPI.cpp index 8ee476164785..40d320d5e822 100644 --- a/Marlin/src/HAL/STM32/HAL_SPI.cpp +++ b/Marlin/src/HAL/STM32/HAL_SPI.cpp @@ -102,9 +102,9 @@ static SPISettings spiConfig; // Soft SPI receive byte uint8_t spiRec() { - DISABLE_ISRS(); // No interrupts during byte receive + hal.isr_off(); // No interrupts during byte receive const uint8_t data = HAL_SPI_STM32_SpiTransfer_Mode_3(0xFF); - ENABLE_ISRS(); // Enable interrupts + hal.isr_on(); // Enable interrupts return data; } @@ -116,9 +116,9 @@ static SPISettings spiConfig; // Soft SPI send byte void spiSend(uint8_t data) { - DISABLE_ISRS(); // No interrupts during byte send + hal.isr_off(); // No interrupts during byte send HAL_SPI_STM32_SpiTransfer_Mode_3(data); // Don't care what is received - ENABLE_ISRS(); // Enable interrupts + hal.isr_on(); // Enable interrupts } // Soft SPI send block diff --git a/Marlin/src/HAL/STM32/eeprom_flash.cpp b/Marlin/src/HAL/STM32/eeprom_flash.cpp index 252b057362c9..7c8cc8dd21e1 100644 --- a/Marlin/src/HAL/STM32/eeprom_flash.cpp +++ b/Marlin/src/HAL/STM32/eeprom_flash.cpp @@ -174,9 +174,9 @@ bool PersistentStore::access_finish() { UNLOCK_FLASH(); TERN_(HAS_PAUSE_SERVO_OUTPUT, PAUSE_SERVO_OUTPUT()); - DISABLE_ISRS(); + hal.isr_off(); status = HAL_FLASHEx_Erase(&EraseInitStruct, &SectorError); - ENABLE_ISRS(); + hal.isr_on(); TERN_(HAS_PAUSE_SERVO_OUTPUT, RESUME_SERVO_OUTPUT()); if (status != HAL_OK) { DEBUG_ECHOLNPGM("HAL_FLASHEx_Erase=", status); @@ -229,9 +229,9 @@ bool PersistentStore::access_finish() { // output. Servo output still glitches with interrupts disabled, but recovers after the // erase. TERN_(HAS_PAUSE_SERVO_OUTPUT, PAUSE_SERVO_OUTPUT()); - DISABLE_ISRS(); + hal.isr_off(); eeprom_buffer_flush(); - ENABLE_ISRS(); + hal.isr_on(); TERN_(HAS_PAUSE_SERVO_OUTPUT, RESUME_SERVO_OUTPUT()); eeprom_data_written = false; diff --git a/Marlin/src/HAL/STM32/fast_pwm.cpp b/Marlin/src/HAL/STM32/fast_pwm.cpp index 590c9dbe3da6..a0d8ecc612c2 100644 --- a/Marlin/src/HAL/STM32/fast_pwm.cpp +++ b/Marlin/src/HAL/STM32/fast_pwm.cpp @@ -29,7 +29,7 @@ // Array to support sticky frequency sets per timer static uint16_t timer_freq[TIMER_NUM]; -void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) { +void MarlinHAL::set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) { const uint16_t duty = invert ? v_size - v : v; if (PWM_PIN(pin)) { const PinName pin_name = digitalPinToPinName(pin); @@ -61,7 +61,7 @@ void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255 } } -void set_pwm_frequency(const pin_t pin, const uint16_t f_desired) { +void MarlinHAL::set_pwm_frequency(const pin_t pin, const uint16_t f_desired) { if (!PWM_PIN(pin)) return; // Don't proceed if no hardware timer const PinName pin_name = digitalPinToPinName(pin); TIM_TypeDef * const Instance = (TIM_TypeDef *)pinmap_peripheral(pin_name, PinMap_PWM); // Get HAL timer instance diff --git a/Marlin/src/HAL/STM32/pinsDebug.h b/Marlin/src/HAL/STM32/pinsDebug.h index 73d850fc4313..a7f022a0b62d 100644 --- a/Marlin/src/HAL/STM32/pinsDebug.h +++ b/Marlin/src/HAL/STM32/pinsDebug.h @@ -115,7 +115,6 @@ const XrefInfo pin_xref[] PROGMEM = { #define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d) "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0) #define PRINT_PORT(ANUM) port_print(ANUM) #define DIGITAL_PIN_TO_ANALOG_PIN(ANUM) -1 // will report analog pin number in the print port routine -#define GET_PIN_MAP_PIN_M43(Index) pin_xref[Index].Ard_num // x is a variable used to search pin_array #define GET_ARRAY_IS_DIGITAL(x) ((bool) pin_array[x].is_digital) @@ -123,6 +122,11 @@ const XrefInfo pin_xref[] PROGMEM = { #define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0) #define MULTI_NAME_PAD 33 // space needed to be pretty if not first name assigned to a pin +// +// Pin Mapping for M43 +// +#define GET_PIN_MAP_PIN_M43(Index) pin_xref[Index].Ard_num + #ifndef M43_NEVER_TOUCH #define _M43_NEVER_TOUCH(Index) (Index >= 9 && Index <= 12) // SERIAL/USB pins: PA9(TX) PA10(RX) PA11(USB_DM) PA12(USB_DP) #ifdef KILL_PIN diff --git a/Marlin/src/HAL/STM32/timers.h b/Marlin/src/HAL/STM32/timers.h index aad543229e16..6828998198af 100644 --- a/Marlin/src/HAL/STM32/timers.h +++ b/Marlin/src/HAL/STM32/timers.h @@ -116,5 +116,5 @@ FORCE_INLINE static void HAL_timer_set_compare(const uint8_t timer_num, const ha } } -#define HAL_timer_isr_prologue(T) -#define HAL_timer_isr_epilogue(T) +#define HAL_timer_isr_prologue(T) NOOP +#define HAL_timer_isr_epilogue(T) NOOP diff --git a/Marlin/src/HAL/STM32F1/HAL.cpp b/Marlin/src/HAL/STM32F1/HAL.cpp index a0486da5b0b8..1d58b106adfd 100644 --- a/Marlin/src/HAL/STM32F1/HAL.cpp +++ b/Marlin/src/HAL/STM32F1/HAL.cpp @@ -79,7 +79,7 @@ #define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ // ------------------------ -// Public Variables +// Serial ports // ------------------------ #if defined(SERIAL_USB) && !HAS_SD_HOST_DRIVE @@ -112,74 +112,37 @@ #endif #endif -uint16_t HAL_adc_result; - // ------------------------ -// Private Variables +// ADC // ------------------------ -STM32ADC adc(ADC1); - -const uint8_t adc_pins[] = { - OPTITEM(HAS_TEMP_ADC_0, TEMP_0_PIN) - OPTITEM(HAS_TEMP_ADC_1, TEMP_1_PIN) - OPTITEM(HAS_TEMP_ADC_2, TEMP_2_PIN) - OPTITEM(HAS_TEMP_ADC_3, TEMP_3_PIN) - OPTITEM(HAS_TEMP_ADC_4, TEMP_4_PIN) - OPTITEM(HAS_TEMP_ADC_5, TEMP_5_PIN) - OPTITEM(HAS_TEMP_ADC_6, TEMP_6_PIN) - OPTITEM(HAS_TEMP_ADC_7, TEMP_7_PIN) - OPTITEM(HAS_HEATED_BED, TEMP_BED_PIN) - OPTITEM(HAS_TEMP_CHAMBER, TEMP_CHAMBER_PIN) - OPTITEM(HAS_TEMP_ADC_PROBE, TEMP_PROBE_PIN) - OPTITEM(HAS_TEMP_COOLER, TEMP_COOLER_PIN) - OPTITEM(HAS_TEMP_BOARD, TEMP_BOARD_PIN) - OPTITEM(FILAMENT_WIDTH_SENSOR, FILWIDTH_PIN) - OPTITEM(HAS_ADC_BUTTONS, ADC_KEYPAD_PIN) - OPTITEM(HAS_JOY_ADC_X, JOY_X_PIN) - OPTITEM(HAS_JOY_ADC_Y, JOY_Y_PIN) - OPTITEM(HAS_JOY_ADC_Z, JOY_Z_PIN) - OPTITEM(POWER_MONITOR_CURRENT, POWER_MONITOR_CURRENT_PIN) - OPTITEM(POWER_MONITOR_VOLTAGE, POWER_MONITOR_VOLTAGE_PIN) -}; -enum TempPinIndex : char { - OPTITEM(HAS_TEMP_ADC_0, TEMP_0) - OPTITEM(HAS_TEMP_ADC_1, TEMP_1) - OPTITEM(HAS_TEMP_ADC_2, TEMP_2) - OPTITEM(HAS_TEMP_ADC_3, TEMP_3) - OPTITEM(HAS_TEMP_ADC_4, TEMP_4) - OPTITEM(HAS_TEMP_ADC_5, TEMP_5) - OPTITEM(HAS_TEMP_ADC_6, TEMP_6) - OPTITEM(HAS_TEMP_ADC_7, TEMP_7) - OPTITEM(HAS_HEATED_BED, TEMP_BED) - OPTITEM(HAS_TEMP_CHAMBER, TEMP_CHAMBER) - OPTITEM(HAS_TEMP_ADC_PROBE, TEMP_PROBE) - OPTITEM(HAS_TEMP_COOLER, TEMP_COOLER) - OPTITEM(HAS_TEMP_BOARD, TEMP_BOARD) - OPTITEM(FILAMENT_WIDTH_SENSOR, FILWIDTH) - OPTITEM(HAS_ADC_BUTTONS, ADC_KEY) - OPTITEM(HAS_JOY_ADC_X, JOY_X) - OPTITEM(HAS_JOY_ADC_Y, JOY_Y) - OPTITEM(HAS_JOY_ADC_Z, JOY_Z) - OPTITEM(POWER_MONITOR_CURRENT, POWERMON_CURRENT) - OPTITEM(POWER_MONITOR_VOLTAGE, POWERMON_VOLTS) - ADC_PIN_COUNT -}; +// Watch out for recursion here! Our pin_t is signed, so pass through to Arduino -> analogRead(uint8_t) + +uint16_t analogRead(const pin_t pin) { + const bool is_analog = _GET_MODE(pin) == GPIO_INPUT_ANALOG; + return is_analog ? analogRead(uint8_t(pin)) : 0; +} + +// Wrapper to maple unprotected analogWrite +void analogWrite(const pin_t pin, int pwm_val8) { + if (PWM_PIN(pin)) analogWrite(uint8_t(pin), pwm_val8); +} -uint16_t HAL_adc_results[ADC_PIN_COUNT]; +uint16_t MarlinHAL::adc_result; // ------------------------ // Private functions // ------------------------ + static void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) { uint32_t reg_value; - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); // only values 0..7 are used - reg_value = SCB->AIRCR; /* read old register configuration */ - reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */ + reg_value = SCB->AIRCR; // read old register configuration + reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); // clear bits to change reg_value = (reg_value | ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << 8)); /* Insert write key & priority group */ + (PriorityGroupTmp << 8)); // Insert write key & priority group SCB->AIRCR = reg_value; } @@ -187,6 +150,8 @@ static void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) { // Public functions // ------------------------ +void flashFirmware(const int16_t) { hal.reboot(); } + // // Leave PA11/PA12 intact if USBSerial is not used // @@ -206,7 +171,11 @@ static void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) { TERN_(POSTMORTEM_DEBUGGING, extern void install_min_serial()); -void HAL_init() { +// ------------------------ +// MarlinHAL class +// ------------------------ + +void MarlinHAL::init() { NVIC_SetPriorityGrouping(0x3); #if PIN_EXISTS(LED) OUT_WRITE(LED_PIN, LOW); @@ -225,7 +194,7 @@ void HAL_init() { } // HAL idle task -void HAL_idletask() { +void MarlinHAL::idletask() { #if HAS_SHARED_MEDIA // If Marlin is using the SD card we need to lock it to prevent access from // a PC via USB. @@ -240,14 +209,7 @@ void HAL_idletask() { #endif } -void HAL_clear_reset_source() { } - -/** - * TODO: Check this and change or remove. - */ -uint8_t HAL_get_reset_source() { return RST_POWER_ON; } - -void _delay_ms(const int delay_ms) { delay(delay_ms); } +void MarlinHAL::reboot() { nvic_sys_reset(); } extern "C" { extern unsigned int _ebss; // end of bss section @@ -281,31 +243,76 @@ extern "C" { } */ -// ------------------------ +// // ADC -// ------------------------ +// + +enum ADCIndex : uint8_t { + OPTITEM(HAS_TEMP_ADC_0, TEMP_0) + OPTITEM(HAS_TEMP_ADC_1, TEMP_1) + OPTITEM(HAS_TEMP_ADC_2, TEMP_2) + OPTITEM(HAS_TEMP_ADC_3, TEMP_3) + OPTITEM(HAS_TEMP_ADC_4, TEMP_4) + OPTITEM(HAS_TEMP_ADC_5, TEMP_5) + OPTITEM(HAS_TEMP_ADC_6, TEMP_6) + OPTITEM(HAS_TEMP_ADC_7, TEMP_7) + OPTITEM(HAS_HEATED_BED, TEMP_BED) + OPTITEM(HAS_TEMP_CHAMBER, TEMP_CHAMBER) + OPTITEM(HAS_TEMP_ADC_PROBE, TEMP_PROBE) + OPTITEM(HAS_TEMP_COOLER, TEMP_COOLER) + OPTITEM(HAS_TEMP_BOARD, TEMP_BOARD) + OPTITEM(FILAMENT_WIDTH_SENSOR, FILWIDTH) + OPTITEM(HAS_ADC_BUTTONS, ADC_KEY) + OPTITEM(HAS_JOY_ADC_X, JOY_X) + OPTITEM(HAS_JOY_ADC_Y, JOY_Y) + OPTITEM(HAS_JOY_ADC_Z, JOY_Z) + OPTITEM(POWER_MONITOR_CURRENT, POWERMON_CURRENT) + OPTITEM(POWER_MONITOR_VOLTAGE, POWERMON_VOLTS) + ADC_COUNT +}; + +static uint16_t adc_results[ADC_COUNT]; + // Init the AD in continuous capture mode -void HAL_adc_init() { +void MarlinHAL::adc_init() { + static const uint8_t adc_pins[] = { + OPTITEM(HAS_TEMP_ADC_0, TEMP_0_PIN) + OPTITEM(HAS_TEMP_ADC_1, TEMP_1_PIN) + OPTITEM(HAS_TEMP_ADC_2, TEMP_2_PIN) + OPTITEM(HAS_TEMP_ADC_3, TEMP_3_PIN) + OPTITEM(HAS_TEMP_ADC_4, TEMP_4_PIN) + OPTITEM(HAS_TEMP_ADC_5, TEMP_5_PIN) + OPTITEM(HAS_TEMP_ADC_6, TEMP_6_PIN) + OPTITEM(HAS_TEMP_ADC_7, TEMP_7_PIN) + OPTITEM(HAS_HEATED_BED, TEMP_BED_PIN) + OPTITEM(HAS_TEMP_CHAMBER, TEMP_CHAMBER_PIN) + OPTITEM(HAS_TEMP_ADC_PROBE, TEMP_PROBE_PIN) + OPTITEM(HAS_TEMP_COOLER, TEMP_COOLER_PIN) + OPTITEM(HAS_TEMP_BOARD, TEMP_BOARD_PIN) + OPTITEM(FILAMENT_WIDTH_SENSOR, FILWIDTH_PIN) + OPTITEM(HAS_ADC_BUTTONS, ADC_KEYPAD_PIN) + OPTITEM(HAS_JOY_ADC_X, JOY_X_PIN) + OPTITEM(HAS_JOY_ADC_Y, JOY_Y_PIN) + OPTITEM(HAS_JOY_ADC_Z, JOY_Z_PIN) + OPTITEM(POWER_MONITOR_CURRENT, POWER_MONITOR_CURRENT_PIN) + OPTITEM(POWER_MONITOR_VOLTAGE, POWER_MONITOR_VOLTAGE_PIN) + }; + static STM32ADC adc(ADC1); // configure the ADC adc.calibrate(); - #if F_CPU > 72000000 - adc.setSampleRate(ADC_SMPR_71_5); // 71.5 ADC cycles - #else - adc.setSampleRate(ADC_SMPR_41_5); // 41.5 ADC cycles - #endif - adc.setPins((uint8_t *)adc_pins, ADC_PIN_COUNT); - adc.setDMA(HAL_adc_results, (uint16_t)ADC_PIN_COUNT, (uint32_t)(DMA_MINC_MODE | DMA_CIRC_MODE), nullptr); + adc.setSampleRate((F_CPU > 72000000) ? ADC_SMPR_71_5 : ADC_SMPR_41_5); // 71.5 or 41.5 ADC cycles + adc.setPins((uint8_t *)adc_pins, ADC_COUNT); + adc.setDMA(adc_results, uint16_t(ADC_COUNT), uint32_t(DMA_MINC_MODE | DMA_CIRC_MODE), nullptr); adc.setScanMode(); adc.setContinuous(); adc.startConversion(); } -void HAL_adc_start_conversion(const uint8_t adc_pin) { +void MarlinHAL::adc_start(const pin_t pin) { #define __TCASE(N,I) case N: pin_index = I; break; #define _TCASE(C,N,I) TERN_(C, __TCASE(N, I)) - //TEMP_PINS pin_index; - TempPinIndex pin_index; - switch (adc_pin) { + ADCIndex pin_index; + switch (pin) { default: return; _TCASE(HAS_TEMP_ADC_0, TEMP_0_PIN, TEMP_0) _TCASE(HAS_TEMP_ADC_1, TEMP_1_PIN, TEMP_1) @@ -328,23 +335,7 @@ void HAL_adc_start_conversion(const uint8_t adc_pin) { _TCASE(POWER_MONITOR_CURRENT, POWER_MONITOR_CURRENT_PIN, POWERMON_CURRENT) _TCASE(POWER_MONITOR_VOLTAGE, POWER_MONITOR_VOLTAGE_PIN, POWERMON_VOLTS) } - HAL_adc_result = HAL_adc_results[(int)pin_index] >> (12 - HAL_ADC_RESOLUTION); // shift out unused bits -} - -uint16_t HAL_adc_get_result() { return HAL_adc_result; } - -uint16_t analogRead(pin_t pin) { - const bool is_analog = _GET_MODE(pin) == GPIO_INPUT_ANALOG; - return is_analog ? analogRead(uint8_t(pin)) : 0; -} - -// Wrapper to maple unprotected analogWrite -void analogWrite(pin_t pin, int pwm_val8) { - if (PWM_PIN(pin)) analogWrite(uint8_t(pin), pwm_val8); + adc_result = adc_results[(int)pin_index] >> (12 - HAL_ADC_RESOLUTION); // shift out unused bits } -void HAL_reboot() { nvic_sys_reset(); } - -void flashFirmware(const int16_t) { HAL_reboot(); } - #endif // __STM32F1__ diff --git a/Marlin/src/HAL/STM32F1/HAL.h b/Marlin/src/HAL/STM32F1/HAL.h index a766babe155b..8fbb43c6022b 100644 --- a/Marlin/src/HAL/STM32F1/HAL.h +++ b/Marlin/src/HAL/STM32F1/HAL.h @@ -66,6 +66,10 @@ #endif #endif +// ------------------------ +// Serial ports +// ------------------------ + #ifdef SERIAL_USB typedef ForwardSerial1Class< USBSerial > DefaultSerial1; extern DefaultSerial1 MSerial0; @@ -141,11 +145,6 @@ #endif #endif -// Set interrupt grouping for this MCU -void HAL_init(); -#define HAL_IDLETASK 1 -void HAL_idletask(); - /** * TODO: review this to return 1 for pins that are not analog input */ @@ -158,15 +157,7 @@ void HAL_idletask(); #define NO_COMPILE_TIME_PWM #endif -#define CRITICAL_SECTION_START() uint32_t primask = __get_primask(); (void)__iCliRetVal() -#define CRITICAL_SECTION_END() if (!primask) (void)__iSeiRetVal() -#define ISRS_ENABLED() (!__get_primask()) -#define ENABLE_ISRS() ((void)__iSeiRetVal()) -#define DISABLE_ISRS() ((void)__iCliRetVal()) - -// On AVR this is in math.h? -#define square(x) ((x)*(x)) - +// Reset Reason #define RST_POWER_ON 1 #define RST_EXTERNAL 2 #define RST_BROWN_OUT 4 @@ -182,46 +173,63 @@ void HAL_idletask(); typedef int8_t pin_t; // ------------------------ -// Public Variables +// Interrupts // ------------------------ -// Result of last ADC conversion -extern uint16_t HAL_adc_result; +#define CRITICAL_SECTION_START() const bool irqon = !__get_primask(); (void)__iCliRetVal() +#define CRITICAL_SECTION_END() if (!primask) (void)__iSeiRetVal() +#define cli() noInterrupts() +#define sei() interrupts() // ------------------------ -// Public functions +// ADC // ------------------------ -// Disable interrupts -#define cli() noInterrupts() +#ifdef ADC_RESOLUTION + #define HAL_ADC_RESOLUTION ADC_RESOLUTION +#else + #define HAL_ADC_RESOLUTION 12 +#endif -// Enable interrupts -#define sei() interrupts() +#define HAL_ADC_VREF 3.3 -// Memory related -#define __bss_end __bss_end__ +uint16_t analogRead(const pin_t pin); // need hal.adc_enable() first +void analogWrite(const pin_t pin, int pwm_val8); // PWM only! mul by 257 in maple!? -// Clear reset reason -void HAL_clear_reset_source(); +// +// Pin Mapping for M42, M43, M226 +// +#define GET_PIN_MAP_PIN(index) index +#define GET_PIN_MAP_INDEX(pin) pin +#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval) -// Reset reason -uint8_t HAL_get_reset_source(); +#define JTAG_DISABLE() afio_cfg_debug_ports(AFIO_DEBUG_SW_ONLY) +#define JTAGSWD_DISABLE() afio_cfg_debug_ports(AFIO_DEBUG_NONE) -void HAL_reboot(); +#define PLATFORM_M997_SUPPORT +void flashFirmware(const int16_t); -void _delay_ms(const int delay); +#define HAL_CAN_SET_PWM_FREQ // This HAL supports PWM Frequency adjustment +#ifndef PWM_FREQUENCY + #define PWM_FREQUENCY 1000 // Default PWM Frequency +#endif -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wunused-function" +// ------------------------ +// Class Utilities +// ------------------------ -/* -extern "C" { - int freeMemory(); -} -*/ +// Memory related +#define __bss_end __bss_end__ + +void _delay_ms(const int ms); extern "C" char* _sbrk(int incr); +#pragma GCC diagnostic push +#if GCC_VERSION <= 50000 + #pragma GCC diagnostic ignored "-Wunused-function" +#endif + static inline int freeMemory() { volatile char top; return &top - _sbrk(0); @@ -229,58 +237,70 @@ static inline int freeMemory() { #pragma GCC diagnostic pop -// -// ADC -// +// ------------------------ +// MarlinHAL Class +// ------------------------ -#define HAL_ANALOG_SELECT(pin) pinMode(pin, INPUT_ANALOG); +class MarlinHAL { +public: -void HAL_adc_init(); + // Earliest possible init, before setup() + MarlinHAL() {} -#ifdef ADC_RESOLUTION - #define HAL_ADC_RESOLUTION ADC_RESOLUTION -#else - #define HAL_ADC_RESOLUTION 12 -#endif + static void init(); // Called early in setup() + static void init_board() {} // Called less early in setup() + static void reboot(); // Restart the firmware from 0x0 -#define HAL_ADC_VREF 3.3 -#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin) -#define HAL_READ_ADC() HAL_adc_result -#define HAL_ADC_READY() true + // Interrupts + static bool isr_state() { return !__get_primask(); } + static void isr_on() { ((void)__iSeiRetVal()); } + static void isr_off() { ((void)__iCliRetVal()); } -void HAL_adc_start_conversion(const uint8_t adc_pin); -uint16_t HAL_adc_get_result(); + static void delay_ms(const int ms) { delay(ms); } -uint16_t analogRead(pin_t pin); // need HAL_ANALOG_SELECT() first -void analogWrite(pin_t pin, int pwm_val8); // PWM only! mul by 257 in maple!? + // Tasks, called from idle() + static void idletask(); -#define GET_PIN_MAP_PIN(index) index -#define GET_PIN_MAP_INDEX(pin) pin -#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval) + // Reset + static uint8_t get_reset_source() { return RST_POWER_ON; } + static void clear_reset_source() {} -#define JTAG_DISABLE() afio_cfg_debug_ports(AFIO_DEBUG_SW_ONLY) -#define JTAGSWD_DISABLE() afio_cfg_debug_ports(AFIO_DEBUG_NONE) + // Free SRAM + static int freeMemory() { return ::freeMemory(); } -#define PLATFORM_M997_SUPPORT -void flashFirmware(const int16_t); + // + // ADC Methods + // -#ifndef PWM_FREQUENCY - #define PWM_FREQUENCY 1000 // Default PWM Frequency -#endif -#define HAL_CAN_SET_PWM_FREQ // This HAL supports PWM Frequency adjustment + static uint16_t adc_result; -/** - * set_pwm_frequency - * Set the frequency of the timer corresponding to the provided pin - * All Timer PWM pins run at the same frequency - */ -void set_pwm_frequency(const pin_t pin, const uint16_t f_desired); + // Called by Temperature::init once at startup + static void adc_init(); -/** - * set_pwm_duty - * Set the PWM duty cycle of the provided pin to the provided value - * Optionally allows inverting the duty cycle [default = false] - * Optionally allows changing the maximum size of the provided value to enable finer PWM duty control [default = 255] - * The timer must be pre-configured with set_pwm_frequency() if the default frequency is not desired. - */ -void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255, const bool invert=false); + // Called by Temperature::init for each sensor at startup + static void adc_enable(const pin_t pin) { pinMode(pin, INPUT_ANALOG); } + + // Begin ADC sampling on the given channel + static void adc_start(const pin_t pin); + + // Is the ADC ready for reading? + static bool adc_ready() { return true; } + + // The current value of the ADC register + static uint16_t adc_value() { return adc_result; } + + /** + * Set the PWM duty cycle for the pin to the given value. + * Optionally invert the duty cycle [default = false] + * Optionally change the maximum size of the provided value to enable finer PWM duty control [default = 255] + * The timer must be pre-configured with set_pwm_frequency() if the default frequency is not desired. + */ + static void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false); + + /** + * Set the frequency of the timer for the given pin. + * All Timer PWM pins run at the same frequency. + */ + static void set_pwm_frequency(const pin_t pin, const uint16_t f_desired); + +}; diff --git a/Marlin/src/HAL/STM32F1/SPI.cpp b/Marlin/src/HAL/STM32F1/SPI.cpp index 8bfa3d236a7c..1ce2c7d3fd5d 100644 --- a/Marlin/src/HAL/STM32F1/SPI.cpp +++ b/Marlin/src/HAL/STM32F1/SPI.cpp @@ -91,6 +91,14 @@ static const spi_pins board_spi_pins[] __FLASH__ = { static void *_spi3_this; #endif +/** + * @brief Wait until TXE (tx empty) flag is set and BSY (busy) flag unset. + */ +static inline void waitSpiTxEnd(spi_dev *spi_d) { + while (spi_is_tx_empty(spi_d) == 0) { /* nada */ } // wait until TXE=1 + while (spi_is_busy(spi_d) != 0) { /* nada */ } // wait until BSY=0 +} + /** * Constructor */ diff --git a/Marlin/src/HAL/STM32F1/SPI.h b/Marlin/src/HAL/STM32F1/SPI.h index 92f42263014a..13f4d5ed6cfe 100644 --- a/Marlin/src/HAL/STM32F1/SPI.h +++ b/Marlin/src/HAL/STM32F1/SPI.h @@ -414,12 +414,4 @@ class SPIClass { */ }; -/** - * @brief Wait until TXE (tx empty) flag is set and BSY (busy) flag unset. - */ -static void waitSpiTxEnd(spi_dev *spi_d) { - while (spi_is_tx_empty(spi_d) == 0) { /* nada */ } // wait until TXE=1 - while (spi_is_busy(spi_d) != 0) { /* nada */ } // wait until BSY=0 -} - extern SPIClass SPI; diff --git a/Marlin/src/HAL/STM32F1/Servo.h b/Marlin/src/HAL/STM32F1/Servo.h index b6143de81d62..745a1c93f07d 100644 --- a/Marlin/src/HAL/STM32F1/Servo.h +++ b/Marlin/src/HAL/STM32F1/Servo.h @@ -35,7 +35,8 @@ #define SERVO_DEFAULT_MIN_ANGLE 0 #define SERVO_DEFAULT_MAX_ANGLE 180 -#define HAL_SERVO_LIB libServo +class libServo; +typedef libServo hal_servo_t; class libServo { public: diff --git a/Marlin/src/HAL/STM32F1/fast_pwm.cpp b/Marlin/src/HAL/STM32F1/fast_pwm.cpp index 13411d9af084..297804a3ac42 100644 --- a/Marlin/src/HAL/STM32F1/fast_pwm.cpp +++ b/Marlin/src/HAL/STM32F1/fast_pwm.cpp @@ -21,11 +21,9 @@ */ #ifdef __STM32F1__ -#include "../../inc/MarlinConfigPre.h" +#include "../../inc/MarlinConfig.h" #include -#include "HAL.h" -#include "timers.h" #define NR_TIMERS TERN(STM32_XL_DENSITY, 14, 8) // Maple timers, 14 for STM32_XL_DENSITY (F/G chips), 8 for HIGH density (C D E) @@ -38,7 +36,7 @@ inline uint8_t timer_and_index_for_pin(const pin_t pin, timer_dev **timer_ptr) { return 0; } -void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) { +void MarlinHAL::set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) { const uint16_t duty = invert ? v_size - v : v; if (PWM_PIN(pin)) { timer_dev *timer; UNUSED(timer); @@ -54,7 +52,7 @@ void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255 } } -void set_pwm_frequency(const pin_t pin, const uint16_t f_desired) { +void MarlinHAL::set_pwm_frequency(const pin_t pin, const uint16_t f_desired) { if (!PWM_PIN(pin)) return; // Don't proceed if no hardware timer timer_dev *timer; UNUSED(timer); diff --git a/Marlin/src/HAL/STM32F1/timers.h b/Marlin/src/HAL/STM32F1/timers.h index f9ab6d13d374..0cd807fc8479 100644 --- a/Marlin/src/HAL/STM32F1/timers.h +++ b/Marlin/src/HAL/STM32F1/timers.h @@ -188,7 +188,7 @@ FORCE_INLINE static void HAL_timer_isr_prologue(const uint8_t timer_num) { } } -#define HAL_timer_isr_epilogue(T) +#define HAL_timer_isr_epilogue(T) NOOP // No command is available in framework to turn off ARPE bit, which is turned on by default in libmaple. // Needed here to reset ARPE=0 for stepper timer diff --git a/Marlin/src/HAL/TEENSY31_32/HAL.cpp b/Marlin/src/HAL/TEENSY31_32/HAL.cpp index f08cf799e9e8..b923ab77b1f1 100644 --- a/Marlin/src/HAL/TEENSY31_32/HAL.cpp +++ b/Marlin/src/HAL/TEENSY31_32/HAL.cpp @@ -31,6 +31,10 @@ #include +// ------------------------ +// Serial ports +// ------------------------ + #define _IMPLEMENT_SERIAL(X) DefaultSerial##X MSerial##X(false, Serial##X) #define IMPLEMENT_SERIAL(X) _IMPLEMENT_SERIAL(X) #if WITHIN(SERIAL_PORT, 0, 3) @@ -40,33 +44,32 @@ #endif USBSerialType USBSerial(false, SerialUSB); -uint16_t HAL_adc_result; - -static const uint8_t pin2sc1a[] = { - 5, 14, 8, 9, 13, 12, 6, 7, 15, 4, 0, 19, 3, 31, // 0-13, we treat them as A0-A13 - 5, 14, 8, 9, 13, 12, 6, 7, 15, 4, // 14-23 (A0-A9) - 31, 31, 31, 31, 31, 31, 31, 31, 31, 31, // 24-33 - 0+64, 19+64, 3+64, 31+64, // 34-37 (A10-A13) - 26, 22, 23, 27, 29, 30 // 38-43: temp. sensor, VREF_OUT, A14, bandgap, VREFH, VREFL. A14 isn't connected to anything in Teensy 3.0. -}; - -/* - // disable interrupts - void cli() { noInterrupts(); } +// ------------------------ +// Class Utilities +// ------------------------ - // enable interrupts - void sei() { interrupts(); } -*/ +extern "C" { + extern char __bss_end; + extern char __heap_start; + extern void* __brkval; -void HAL_adc_init() { - analog_init(); - while (ADC0_SC3 & ADC_SC3_CAL) {}; // Wait for calibration to finish - NVIC_ENABLE_IRQ(IRQ_FTM1); + int freeMemory() { + int free_memory; + if ((int)__brkval == 0) + free_memory = ((int)&free_memory) - ((int)&__bss_end); + else + free_memory = ((int)&free_memory) - ((int)__brkval); + return free_memory; + } } -void HAL_clear_reset_source() { } +// ------------------------ +// MarlinHAL Class +// ------------------------ -uint8_t HAL_get_reset_source() { +void MarlinHAL::reboot() { _reboot_Teensyduino_(); } + +uint8_t MarlinHAL::get_reset_source() { switch (RCM_SRS0) { case 128: return RST_POWER_ON; break; case 64: return RST_EXTERNAL; break; @@ -78,25 +81,25 @@ uint8_t HAL_get_reset_source() { return 0; } -void HAL_reboot() { _reboot_Teensyduino_(); } +// ADC -extern "C" { - extern char __bss_end; - extern char __heap_start; - extern void* __brkval; - - int freeMemory() { - int free_memory; - if ((int)__brkval == 0) - free_memory = ((int)&free_memory) - ((int)&__bss_end); - else - free_memory = ((int)&free_memory) - ((int)__brkval); - return free_memory; - } +void MarlinHAL::adc_init() { + analog_init(); + while (ADC0_SC3 & ADC_SC3_CAL) {}; // Wait for calibration to finish + NVIC_ENABLE_IRQ(IRQ_FTM1); } -void HAL_adc_start_conversion(const uint8_t adc_pin) { ADC0_SC1A = pin2sc1a[adc_pin]; } +void MarlinHAL::adc_start(const pin_t pin) { + static const uint8_t pin2sc1a[] = { + 5, 14, 8, 9, 13, 12, 6, 7, 15, 4, 0, 19, 3, 31, // 0-13, we treat them as A0-A13 + 5, 14, 8, 9, 13, 12, 6, 7, 15, 4, // 14-23 (A0-A9) + 31, 31, 31, 31, 31, 31, 31, 31, 31, 31, // 24-33 + 0+64, 19+64, 3+64, 31+64, // 34-37 (A10-A13) + 26, 22, 23, 27, 29, 30 // 38-43: temp. sensor, VREF_OUT, A14, bandgap, VREFH, VREFL. A14 isn't connected to anything in Teensy 3.0. + }; + ADC0_SC1A = pin2sc1a[pin]; +} -uint16_t HAL_adc_get_result() { return ADC0_RA; } +uint16_t MarlinHAL::adc_value() { return ADC0_RA; } #endif // __MK20DX256__ diff --git a/Marlin/src/HAL/TEENSY31_32/HAL.h b/Marlin/src/HAL/TEENSY31_32/HAL.h index 61d8b34604c5..50c0f411cf92 100644 --- a/Marlin/src/HAL/TEENSY31_32/HAL.h +++ b/Marlin/src/HAL/TEENSY31_32/HAL.h @@ -36,12 +36,9 @@ #include -#define CPU_ST7920_DELAY_1 600 -#define CPU_ST7920_DELAY_2 750 -#define CPU_ST7920_DELAY_3 750 - -//#undef MOTHERBOARD -//#define MOTHERBOARD BOARD_TEENSY31_32 +// ------------------------ +// Defines +// ------------------------ #define IS_32BIT_TEENSY 1 #define IS_TEENSY_31_32 1 @@ -49,6 +46,14 @@ #define IS_TEENSY32 1 #endif +#define CPU_ST7920_DELAY_1 600 +#define CPU_ST7920_DELAY_2 750 +#define CPU_ST7920_DELAY_3 750 + +// ------------------------ +// Serial ports +// ------------------------ + #include "../../core/serial_hook.h" #define Serial0 Serial @@ -72,31 +77,44 @@ extern USBSerialType USBSerial; #error "The required SERIAL_PORT must be from 0 to 3, or -1 for Native USB." #endif -#define HAL_SERVO_LIB libServo +// ------------------------ +// Types +// ------------------------ + +class libServo; +typedef libServo hal_servo_t; typedef int8_t pin_t; -#ifndef analogInputToDigitalPin - #define analogInputToDigitalPin(p) ((p < 12U) ? (p) + 54U : -1) -#endif +// ------------------------ +// Interrupts +// ------------------------ -#define CRITICAL_SECTION_START() uint32_t primask = __get_PRIMASK(); __disable_irq() -#define CRITICAL_SECTION_END() if (!primask) __enable_irq() -#define ISRS_ENABLED() (!__get_PRIMASK()) -#define ENABLE_ISRS() __enable_irq() -#define DISABLE_ISRS() __disable_irq() +uint32_t __get_PRIMASK(void); // CMSIS +#define CRITICAL_SECTION_START() const bool irqon = !__get_PRIMASK(); __disable_irq() +#define CRITICAL_SECTION_END() if (irqon) __enable_irq() -inline void HAL_init() {} +// ------------------------ +// ADC +// ------------------------ -// Clear the reset reason -void HAL_clear_reset_source(); +#ifndef analogInputToDigitalPin + #define analogInputToDigitalPin(p) ((p < 12U) ? (p) + 54U : -1) +#endif -// Get the reason for the reset -uint8_t HAL_get_reset_source(); +#define HAL_ADC_VREF 3.3 +#define HAL_ADC_RESOLUTION 10 -void HAL_reboot(); +// +// Pin Mapping for M42, M43, M226 +// +#define GET_PIN_MAP_PIN(index) index +#define GET_PIN_MAP_INDEX(pin) pin +#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval) -FORCE_INLINE void _delay_ms(const int delay_ms) { delay(delay_ms); } +// ------------------------ +// Class Utilities +// ------------------------ #pragma GCC diagnostic push #if GCC_VERSION <= 50000 @@ -107,27 +125,63 @@ extern "C" int freeMemory(); #pragma GCC diagnostic pop -// ADC +// ------------------------ +// MarlinHAL Class +// ------------------------ -void HAL_adc_init(); +class MarlinHAL { +public: -#define HAL_ADC_VREF 3.3 -#define HAL_ADC_RESOLUTION 10 -#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin) -#define HAL_READ_ADC() HAL_adc_get_result() -#define HAL_ADC_READY() true + // Earliest possible init, before setup() + MarlinHAL() {} -#define HAL_ANALOG_SELECT(pin) + static void init() {} // Called early in setup() + static void init_board() {} // Called less early in setup() + static void reboot(); // Restart the firmware from 0x0 -void HAL_adc_start_conversion(const uint8_t adc_pin); -uint16_t HAL_adc_get_result(); + // Interrupts + static bool isr_state() { return !__get_PRIMASK(); } + static void isr_on() { __enable_irq(); } + static void isr_off() { __disable_irq(); } -// PWM + static void delay_ms(const int ms) { delay(ms); } -inline void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) { analogWrite(pin, v); } + // Tasks, called from idle() + static void idletask() {} -// Pin Map + // Reset + static uint8_t get_reset_source(); + static void clear_reset_source() {} -#define GET_PIN_MAP_PIN(index) index -#define GET_PIN_MAP_INDEX(pin) pin -#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval) + // Free SRAM + static int freeMemory() { return ::freeMemory(); } + + // + // ADC Methods + // + + // Called by Temperature::init once at startup + static void adc_init(); + + // Called by Temperature::init for each sensor at startup + static void adc_enable(const pin_t ch) {} + + // Begin ADC sampling on the given channel + static void adc_start(const pin_t ch); + + // Is the ADC ready for reading? + static bool adc_ready() { return true; } + + // The current value of the ADC register + static uint16_t adc_value(); + + /** + * Set the PWM duty cycle for the pin to the given value. + * No option to invert the duty cycle [default = false] + * No option to change the scale of the provided value to enable finer PWM duty control [default = 255] + */ + static void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) { + analogWrite(pin, v); + } + +}; diff --git a/Marlin/src/HAL/TEENSY31_32/timers.h b/Marlin/src/HAL/TEENSY31_32/timers.h index 3b073d63ab29..9fcbb6f232c9 100644 --- a/Marlin/src/HAL/TEENSY31_32/timers.h +++ b/Marlin/src/HAL/TEENSY31_32/timers.h @@ -110,4 +110,4 @@ void HAL_timer_disable_interrupt(const uint8_t timer_num); bool HAL_timer_interrupt_enabled(const uint8_t timer_num); void HAL_timer_isr_prologue(const uint8_t timer_num); -#define HAL_timer_isr_epilogue(T) +#define HAL_timer_isr_epilogue(T) NOOP diff --git a/Marlin/src/HAL/TEENSY35_36/HAL.cpp b/Marlin/src/HAL/TEENSY35_36/HAL.cpp index 046c00b56ed5..54a5ad385536 100644 --- a/Marlin/src/HAL/TEENSY35_36/HAL.cpp +++ b/Marlin/src/HAL/TEENSY35_36/HAL.cpp @@ -31,6 +31,10 @@ #include +// ------------------------ +// Serial ports +// ------------------------ + #define _IMPLEMENT_SERIAL(X) DefaultSerial##X MSerial##X(false, Serial##X) #define IMPLEMENT_SERIAL(X) _IMPLEMENT_SERIAL(X) #if WITHIN(SERIAL_PORT, 0, 3) @@ -39,42 +43,34 @@ USBSerialType USBSerial(false, SerialUSB); -uint16_t HAL_adc_result, HAL_adc_select; - -static const uint8_t pin2sc1a[] = { - 5, 14, 8, 9, 13, 12, 6, 7, 15, 4, 3, 19+128, 14+128, 15+128, // 0-13 -> A0-A13 - 5, 14, 8, 9, 13, 12, 6, 7, 15, 4, // 14-23 are A0-A9 - 255, 255, 255, 255, 255, 255, 255, // 24-30 are digital only - 14+128, 15+128, 17, 18, 4+128, 5+128, 6+128, 7+128, 17+128, // 31-39 are A12-A20 - 255, 255, 255, 255, 255, 255, 255, 255, 255, // 40-48 are digital only - 10+128, 11+128, // 49-50 are A23-A24 - 255, 255, 255, 255, 255, 255, 255, // 51-57 are digital only - 255, 255, 255, 255, 255, 255, // 58-63 (sd card pins) are digital only - 3, 19+128, // 64-65 are A10-A11 - 23, 23+128,// 66-67 are A21-A22 (DAC pins) - 1, 1+128, // 68-69 are A25-A26 (unused USB host port on Teensy 3.5) - 26, // 70 is Temperature Sensor - 18+128 // 71 is Vref -}; - -/* - // disable interrupts - void cli() { noInterrupts(); } - - // enable interrupts - void sei() { interrupts(); } -*/ - -void HAL_adc_init() { - analog_init(); - while (ADC0_SC3 & ADC_SC3_CAL) {}; // Wait for calibration to finish - while (ADC1_SC3 & ADC_SC3_CAL) {}; // Wait for calibration to finish - NVIC_ENABLE_IRQ(IRQ_FTM1); +// ------------------------ +// Class Utilities +// ------------------------ + +extern "C" { + extern char __bss_end; + extern char __heap_start; + extern void* __brkval; + + int freeMemory() { + int free_memory; + if ((int)__brkval == 0) + free_memory = ((int)&free_memory) - ((int)&__bss_end); + else + free_memory = ((int)&free_memory) - ((int)__brkval); + return free_memory; + } } -void HAL_clear_reset_source() { } +// ------------------------ +// MarlinHAL Class +// ------------------------ -uint8_t HAL_get_reset_source() { +void MarlinHAL::reboot() { _reboot_Teensyduino_(); } + +// Reset + +uint8_t MarlinHAL::get_reset_source() { switch (RCM_SRS0) { case 128: return RST_POWER_ON; break; case 64: return RST_EXTERNAL; break; @@ -86,41 +82,49 @@ uint8_t HAL_get_reset_source() { return 0; } -void HAL_reboot() { _reboot_Teensyduino_(); } +// ADC -extern "C" { - extern char __bss_end; - extern char __heap_start; - extern void* __brkval; +int8_t MarlinHAL::adc_select; - int freeMemory() { - int free_memory; - if ((int)__brkval == 0) - free_memory = ((int)&free_memory) - ((int)&__bss_end); - else - free_memory = ((int)&free_memory) - ((int)__brkval); - return free_memory; - } +void MarlinHAL::adc_init() { + analog_init(); + while (ADC0_SC3 & ADC_SC3_CAL) { /* Wait for calibration to finish */ } + while (ADC1_SC3 & ADC_SC3_CAL) { /* Wait for calibration to finish */ } + NVIC_ENABLE_IRQ(IRQ_FTM1); } -void HAL_adc_start_conversion(const uint8_t adc_pin) { +void MarlinHAL::adc_start(const pin_t adc_pin) { + static const uint8_t pin2sc1a[] = { + 5, 14, 8, 9, 13, 12, 6, 7, 15, 4, 3, 19+128, 14+128, 15+128, // 0-13 -> A0-A13 + 5, 14, 8, 9, 13, 12, 6, 7, 15, 4, // 14-23 are A0-A9 + 255, 255, 255, 255, 255, 255, 255, // 24-30 are digital only + 14+128, 15+128, 17, 18, 4+128, 5+128, 6+128, 7+128, 17+128, // 31-39 are A12-A20 + 255, 255, 255, 255, 255, 255, 255, 255, 255, // 40-48 are digital only + 10+128, 11+128, // 49-50 are A23-A24 + 255, 255, 255, 255, 255, 255, 255, // 51-57 are digital only + 255, 255, 255, 255, 255, 255, // 58-63 (sd card pins) are digital only + 3, 19+128, // 64-65 are A10-A11 + 23, 23+128,// 66-67 are A21-A22 (DAC pins) + 1, 1+128, // 68-69 are A25-A26 (unused USB host port on Teensy 3.5) + 26, // 70 is Temperature Sensor + 18+128 // 71 is Vref + }; const uint16_t pin = pin2sc1a[adc_pin]; if (pin == 0xFF) { - // Digital only - HAL_adc_select = -1; + adc_select = -1; // Digital only } else if (pin & 0x80) { - HAL_adc_select = 1; + adc_select = 1; ADC1_SC1A = pin & 0x7F; } else { - HAL_adc_select = 0; + adc_select = 0; ADC0_SC1A = pin; } } -uint16_t HAL_adc_get_result() { - switch (HAL_adc_select) { +uint16_t MarlinHAL::adc_value() { + switch (adc_select) { case 0: return ADC0_RA; case 1: return ADC1_RA; } diff --git a/Marlin/src/HAL/TEENSY35_36/HAL.h b/Marlin/src/HAL/TEENSY35_36/HAL.h index 892eb2d3c5b8..e4c57f8d1e10 100644 --- a/Marlin/src/HAL/TEENSY35_36/HAL.h +++ b/Marlin/src/HAL/TEENSY35_36/HAL.h @@ -37,10 +37,6 @@ #include #include -#define CPU_ST7920_DELAY_1 600 -#define CPU_ST7920_DELAY_2 750 -#define CPU_ST7920_DELAY_3 750 - // ------------------------ // Defines // ------------------------ @@ -53,6 +49,17 @@ #define IS_TEENSY35 1 #endif +#define CPU_ST7920_DELAY_1 600 +#define CPU_ST7920_DELAY_2 750 +#define CPU_ST7920_DELAY_3 750 + +#undef sq +#define sq(x) ((x)*(x)) + +// ------------------------ +// Serial ports +// ------------------------ + #include "../../core/serial_hook.h" #define Serial0 Serial @@ -76,34 +83,43 @@ extern USBSerialType USBSerial; #error "SERIAL_PORT must be from 0 to 3, or -1 for Native USB." #endif -#define HAL_SERVO_LIB libServo +// ------------------------ +// Types +// ------------------------ -typedef int8_t pin_t; +class libServo; +typedef libServo hal_servo_t; -#ifndef analogInputToDigitalPin - #define analogInputToDigitalPin(p) ((p < 12U) ? (p) + 54U : -1) -#endif +typedef int8_t pin_t; -#define CRITICAL_SECTION_START() uint32_t primask = __get_primask(); __disable_irq() -#define CRITICAL_SECTION_END() if (!primask) __enable_irq() -#define ISRS_ENABLED() (!__get_primask()) -#define ENABLE_ISRS() __enable_irq() -#define DISABLE_ISRS() __disable_irq() +// ------------------------ +// Interrupts +// ------------------------ -#undef sq -#define sq(x) ((x)*(x)) +#define CRITICAL_SECTION_START() const bool irqon = !__get_primask(); __disable_irq() +#define CRITICAL_SECTION_END() if (irqon) __enable_irq() -inline void HAL_init() {} +// ------------------------ +// ADC +// ------------------------ -// Clear reset reason -void HAL_clear_reset_source(); +#ifndef analogInputToDigitalPin + #define analogInputToDigitalPin(p) ((p < 12U) ? (p) + 54U : -1) +#endif -// Reset reason -uint8_t HAL_get_reset_source(); +#define HAL_ADC_VREF 3.3 +#define HAL_ADC_RESOLUTION 10 -void HAL_reboot(); +// +// Pin Mapping for M42, M43, M226 +// +#define GET_PIN_MAP_PIN(index) index +#define GET_PIN_MAP_INDEX(pin) pin +#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval) -FORCE_INLINE void _delay_ms(const int delay_ms) { delay(delay_ms); } +// ------------------------ +// Class Utilities +// ------------------------ #pragma GCC diagnostic push #if GCC_VERSION <= 50000 @@ -114,27 +130,65 @@ extern "C" int freeMemory(); #pragma GCC diagnostic pop -// ADC +// ------------------------ +// MarlinHAL Class +// ------------------------ -void HAL_adc_init(); +class MarlinHAL { +public: -#define HAL_ADC_VREF 3.3 -#define HAL_ADC_RESOLUTION 10 -#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin) -#define HAL_READ_ADC() HAL_adc_get_result() -#define HAL_ADC_READY() true + // Earliest possible init, before setup() + MarlinHAL() {} -#define HAL_ANALOG_SELECT(pin) + static void init() {} // Called early in setup() + static void init_board() {} // Called less early in setup() + static void reboot(); // Restart the firmware from 0x0 -void HAL_adc_start_conversion(const uint8_t adc_pin); -uint16_t HAL_adc_get_result(); + // Interrupts + static bool isr_state() { return true; } + static void isr_on() { __enable_irq(); } + static void isr_off() { __disable_irq(); } -// PWM + static void delay_ms(const int ms) { delay(ms); } -inline void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) { analogWrite(pin, v); } + // Tasks, called from idle() + static void idletask() {} -// Pin Map + // Reset + static uint8_t get_reset_source(); + static void clear_reset_source() {} -#define GET_PIN_MAP_PIN(index) index -#define GET_PIN_MAP_INDEX(pin) pin -#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval) + // Free SRAM + static int freeMemory() { return ::freeMemory(); } + + // + // ADC Methods + // + + static int8_t adc_select; + + // Called by Temperature::init once at startup + static void adc_init(); + + // Called by Temperature::init for each sensor at startup + static void adc_enable(const pin_t) {} + + // Begin ADC sampling on the given channel + static void adc_start(const pin_t pin); + + // Is the ADC ready for reading? + static bool adc_ready() { return true; } + + // The current value of the ADC register + static uint16_t adc_value(); + + /** + * Set the PWM duty cycle for the pin to the given value. + * No option to invert the duty cycle [default = false] + * No option to change the scale of the provided value to enable finer PWM duty control [default = 255] + */ + static void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) { + analogWrite(pin, v); + } + +}; diff --git a/Marlin/src/HAL/TEENSY35_36/timers.h b/Marlin/src/HAL/TEENSY35_36/timers.h index 6c342bbe0d25..8af79d73928e 100644 --- a/Marlin/src/HAL/TEENSY35_36/timers.h +++ b/Marlin/src/HAL/TEENSY35_36/timers.h @@ -109,4 +109,4 @@ void HAL_timer_disable_interrupt(const uint8_t timer_num); bool HAL_timer_interrupt_enabled(const uint8_t timer_num); void HAL_timer_isr_prologue(const uint8_t timer_num); -#define HAL_timer_isr_epilogue(T) +#define HAL_timer_isr_epilogue(T) NOOP diff --git a/Marlin/src/HAL/TEENSY40_41/HAL.cpp b/Marlin/src/HAL/TEENSY40_41/HAL.cpp index 270bee0dc9d4..68bd38f72ff8 100644 --- a/Marlin/src/HAL/TEENSY40_41/HAL.cpp +++ b/Marlin/src/HAL/TEENSY40_41/HAL.cpp @@ -33,6 +33,10 @@ #include "timers.h" #include +// ------------------------ +// Serial ports +// ------------------------ + #define _IMPLEMENT_SERIAL(X) DefaultSerial##X MSerial##X(false, Serial##X) #define IMPLEMENT_SERIAL(X) _IMPLEMENT_SERIAL(X) #if WITHIN(SERIAL_PORT, 0, 3) @@ -40,75 +44,42 @@ #endif USBSerialType USBSerial(false, SerialUSB); -uint16_t HAL_adc_result, HAL_adc_select; - -static const uint8_t pin2sc1a[] = { - 0x07, // 0/A0 AD_B1_02 - 0x08, // 1/A1 AD_B1_03 - 0x0C, // 2/A2 AD_B1_07 - 0x0B, // 3/A3 AD_B1_06 - 0x06, // 4/A4 AD_B1_01 - 0x05, // 5/A5 AD_B1_00 - 0x0F, // 6/A6 AD_B1_10 - 0x00, // 7/A7 AD_B1_11 - 0x0D, // 8/A8 AD_B1_08 - 0x0E, // 9/A9 AD_B1_09 - 0x01, // 24/A10 AD_B0_12 - 0x02, // 25/A11 AD_B0_13 - 0x83, // 26/A12 AD_B1_14 - only on ADC2, 3 - 0x84, // 27/A13 AD_B1_15 - only on ADC2, 4 - 0x07, // 14/A0 AD_B1_02 - 0x08, // 15/A1 AD_B1_03 - 0x0C, // 16/A2 AD_B1_07 - 0x0B, // 17/A3 AD_B1_06 - 0x06, // 18/A4 AD_B1_01 - 0x05, // 19/A5 AD_B1_00 - 0x0F, // 20/A6 AD_B1_10 - 0x00, // 21/A7 AD_B1_11 - 0x0D, // 22/A8 AD_B1_08 - 0x0E, // 23/A9 AD_B1_09 - 0x01, // 24/A10 AD_B0_12 - 0x02, // 25/A11 AD_B0_13 - 0x83, // 26/A12 AD_B1_14 - only on ADC2, 3 - 0x84, // 27/A13 AD_B1_15 - only on ADC2, 4 - #ifdef ARDUINO_TEENSY41 - 0xFF, // 28 - 0xFF, // 29 - 0xFF, // 30 - 0xFF, // 31 - 0xFF, // 32 - 0xFF, // 33 - 0xFF, // 34 - 0xFF, // 35 - 0xFF, // 36 - 0xFF, // 37 - 0x81, // 38/A14 AD_B1_12 - only on ADC2, 1 - 0x82, // 39/A15 AD_B1_13 - only on ADC2, 2 - 0x09, // 40/A16 AD_B1_04 - 0x0A, // 41/A17 AD_B1_05 - #endif -}; - -/* -// disable interrupts -void cli() { noInterrupts(); } - -// enable interrupts -void sei() { interrupts(); } -*/ - -void HAL_adc_init() { - analog_init(); - while (ADC1_GC & ADC_GC_CAL) ; - while (ADC2_GC & ADC_GC_CAL) ; +// ------------------------ +// Class Utilities +// ------------------------ + +#define __bss_end _ebss + +extern "C" { + extern char __bss_end; + extern char __heap_start; + extern void* __brkval; + + // Doesn't work on Teensy 4.x + uint32_t freeMemory() { + uint32_t free_memory; + free_memory = ((uint32_t)&free_memory) - (((uint32_t)__brkval) ?: ((uint32_t)&__bss_end)); + return free_memory; + } } -void HAL_clear_reset_source() { - uint32_t reset_source = SRC_SRSR; - SRC_SRSR = reset_source; +// ------------------------ +// FastIO +// ------------------------ + +bool is_output(pin_t pin) { + const struct digital_pin_bitband_and_config_table_struct *p; + p = digital_pin_to_info_PGM + pin; + return (*(p->reg + 1) & p->mask); } -uint8_t HAL_get_reset_source() { +// ------------------------ +// MarlinHAL Class +// ------------------------ + +void MarlinHAL::reboot() { _reboot_Teensyduino_(); } + +uint8_t MarlinHAL::get_reset_source() { switch (SRC_SRSR & 0xFF) { case 1: return RST_POWER_ON; break; case 2: return RST_SOFTWARE; break; @@ -121,57 +92,92 @@ uint8_t HAL_get_reset_source() { return 0; } -void HAL_reboot() { _reboot_Teensyduino_(); } +void MarlinHAL::clear_reset_source() { + uint32_t reset_source = SRC_SRSR; + SRC_SRSR = reset_source; +} -#define __bss_end _ebss +// ADC -extern "C" { - extern char __bss_end; - extern char __heap_start; - extern void* __brkval; +int8_t MarlinHAL::adc_select; - // Doesn't work on Teensy 4.x - uint32_t freeMemory() { - uint32_t free_memory; - if ((uint32_t)__brkval == 0) - free_memory = ((uint32_t)&free_memory) - ((uint32_t)&__bss_end); - else - free_memory = ((uint32_t)&free_memory) - ((uint32_t)__brkval); - return free_memory; - } +void MarlinHAL::adc_init() { + analog_init(); + while (ADC1_GC & ADC_GC_CAL) { /* wait */ } + while (ADC2_GC & ADC_GC_CAL) { /* wait */ } } -void HAL_adc_start_conversion(const uint8_t adc_pin) { +void MarlinHAL::adc_start(const pin_t adc_pin) { + static const uint8_t pin2sc1a[] = { + 0x07, // 0/A0 AD_B1_02 + 0x08, // 1/A1 AD_B1_03 + 0x0C, // 2/A2 AD_B1_07 + 0x0B, // 3/A3 AD_B1_06 + 0x06, // 4/A4 AD_B1_01 + 0x05, // 5/A5 AD_B1_00 + 0x0F, // 6/A6 AD_B1_10 + 0x00, // 7/A7 AD_B1_11 + 0x0D, // 8/A8 AD_B1_08 + 0x0E, // 9/A9 AD_B1_09 + 0x01, // 24/A10 AD_B0_12 + 0x02, // 25/A11 AD_B0_13 + 0x83, // 26/A12 AD_B1_14 - only on ADC2, 3 + 0x84, // 27/A13 AD_B1_15 - only on ADC2, 4 + 0x07, // 14/A0 AD_B1_02 + 0x08, // 15/A1 AD_B1_03 + 0x0C, // 16/A2 AD_B1_07 + 0x0B, // 17/A3 AD_B1_06 + 0x06, // 18/A4 AD_B1_01 + 0x05, // 19/A5 AD_B1_00 + 0x0F, // 20/A6 AD_B1_10 + 0x00, // 21/A7 AD_B1_11 + 0x0D, // 22/A8 AD_B1_08 + 0x0E, // 23/A9 AD_B1_09 + 0x01, // 24/A10 AD_B0_12 + 0x02, // 25/A11 AD_B0_13 + 0x83, // 26/A12 AD_B1_14 - only on ADC2, 3 + 0x84, // 27/A13 AD_B1_15 - only on ADC2, 4 + #ifdef ARDUINO_TEENSY41 + 0xFF, // 28 + 0xFF, // 29 + 0xFF, // 30 + 0xFF, // 31 + 0xFF, // 32 + 0xFF, // 33 + 0xFF, // 34 + 0xFF, // 35 + 0xFF, // 36 + 0xFF, // 37 + 0x81, // 38/A14 AD_B1_12 - only on ADC2, 1 + 0x82, // 39/A15 AD_B1_13 - only on ADC2, 2 + 0x09, // 40/A16 AD_B1_04 + 0x0A, // 41/A17 AD_B1_05 + #endif + }; const uint16_t pin = pin2sc1a[adc_pin]; if (pin == 0xFF) { - HAL_adc_select = -1; // Digital only + adc_select = -1; // Digital only } else if (pin & 0x80) { - HAL_adc_select = 1; + adc_select = 1; ADC2_HC0 = pin & 0x7F; } else { - HAL_adc_select = 0; + adc_select = 0; ADC1_HC0 = pin; } } -uint16_t HAL_adc_get_result() { - switch (HAL_adc_select) { +uint16_t MarlinHAL::adc_value() { + switch (adc_select) { case 0: - while (!(ADC1_HS & ADC_HS_COCO0)) ; // wait + while (!(ADC1_HS & ADC_HS_COCO0)) { /* wait */ } return ADC1_R0; case 1: - while (!(ADC2_HS & ADC_HS_COCO0)) ; // wait + while (!(ADC2_HS & ADC_HS_COCO0)) { /* wait */ } return ADC2_R0; } return 0; } -bool is_output(pin_t pin) { - const struct digital_pin_bitband_and_config_table_struct *p; - p = digital_pin_to_info_PGM + pin; - return (*(p->reg + 1) & p->mask); -} - #endif // __IMXRT1062__ diff --git a/Marlin/src/HAL/TEENSY40_41/HAL.h b/Marlin/src/HAL/TEENSY40_41/HAL.h index 2b730768a802..a21e65285409 100644 --- a/Marlin/src/HAL/TEENSY40_41/HAL.h +++ b/Marlin/src/HAL/TEENSY40_41/HAL.h @@ -41,10 +41,6 @@ #include "../../feature/ethernet.h" #endif -#define CPU_ST7920_DELAY_1 600 -#define CPU_ST7920_DELAY_2 750 -#define CPU_ST7920_DELAY_3 750 - // ------------------------ // Defines // ------------------------ @@ -55,7 +51,23 @@ #define IS_TEENSY41 1 #endif +#define CPU_ST7920_DELAY_1 600 +#define CPU_ST7920_DELAY_2 750 +#define CPU_ST7920_DELAY_3 750 + +#undef sq +#define sq(x) ((x)*(x)) + +// Don't place string constants in PROGMEM +#undef PSTR +#define PSTR(str) ({static const char *data = (str); &data[0];}) + +// ------------------------ +// Serial ports +// ------------------------ + #include "../../core/serial_hook.h" + #define Serial0 Serial #define _DECLARE_SERIAL(X) \ typedef ForwardSerial1Class DefaultSerial##X; \ @@ -89,41 +101,47 @@ extern USBSerialType USBSerial; #endif #endif -#define HAL_SERVO_LIB libServo +// ------------------------ +// Types +// ------------------------ -typedef int8_t pin_t; +class libServo; +typedef libServo hal_servo_t; -#ifndef analogInputToDigitalPin - #define analogInputToDigitalPin(p) ((p < 12U) ? (p) + 54U : -1) -#endif +typedef int8_t pin_t; -#define CRITICAL_SECTION_START() uint32_t primask = __get_primask(); __disable_irq() -#define CRITICAL_SECTION_END() if (!primask) __enable_irq() -#define ISRS_ENABLED() (!__get_primask()) -#define ENABLE_ISRS() __enable_irq() -#define DISABLE_ISRS() __disable_irq() +// ------------------------ +// Interrupts +// ------------------------ -#undef sq -#define sq(x) ((x)*(x)) +#define CRITICAL_SECTION_START() const bool irqon = !__get_primask(); __disable_irq() +#define CRITICAL_SECTION_END() if (irqon) __enable_irq() -// Don't place string constants in PROGMEM -#undef PSTR -#define PSTR(str) ({static const char *data = (str); &data[0];}) +// ------------------------ +// ADC +// ------------------------ -// Enable hooks into idle and setup for HAL -#define HAL_IDLETASK 1 -FORCE_INLINE void HAL_idletask() {} -FORCE_INLINE void HAL_init() {} +#ifndef analogInputToDigitalPin + #define analogInputToDigitalPin(p) ((p < 12U) ? (p) + 54U : -1) +#endif -// Clear reset reason -void HAL_clear_reset_source(); +#define HAL_ADC_VREF 3.3 +#define HAL_ADC_RESOLUTION 10 +#define HAL_ADC_FILTERED // turn off ADC oversampling -// Reset reason -uint8_t HAL_get_reset_source(); +// +// Pin Mapping for M42, M43, M226 +// +#define GET_PIN_MAP_PIN(index) index +#define GET_PIN_MAP_INDEX(pin) pin +#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval) -void HAL_reboot(); +// FastIO +bool is_output(pin_t pin); -FORCE_INLINE void _delay_ms(const int delay_ms) { delay(delay_ms); } +// ------------------------ +// Class Utilities +// ------------------------ #pragma GCC diagnostic push #if GCC_VERSION <= 50000 @@ -134,30 +152,65 @@ extern "C" uint32_t freeMemory(); #pragma GCC diagnostic pop -// ADC +// ------------------------ +// MarlinHAL Class +// ------------------------ -void HAL_adc_init(); +class MarlinHAL { +public: -#define HAL_ADC_VREF 3.3 -#define HAL_ADC_RESOLUTION 10 -#define HAL_ADC_FILTERED // turn off ADC oversampling -#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin) -#define HAL_READ_ADC() HAL_adc_get_result() -#define HAL_ADC_READY() true + // Earliest possible init, before setup() + MarlinHAL() {} -#define HAL_ANALOG_SELECT(pin) + static void init() {} // Called early in setup() + static void init_board() {} // Called less early in setup() + static void reboot(); // Restart the firmware from 0x0 -void HAL_adc_start_conversion(const uint8_t adc_pin); -uint16_t HAL_adc_get_result(); + // Interrupts + static bool isr_state() { return !__get_primask(); } + static void isr_on() { __enable_irq(); } + static void isr_off() { __disable_irq(); } -// PWM + static void delay_ms(const int ms) { delay(ms); } -inline void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) { analogWrite(pin, v); } + // Tasks, called from idle() + static void idletask() {} -// Pin Map + // Reset + static uint8_t get_reset_source(); + static void clear_reset_source(); -#define GET_PIN_MAP_PIN(index) index -#define GET_PIN_MAP_INDEX(pin) pin -#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval) + // Free SRAM + static int freeMemory() { return ::freeMemory(); } -bool is_output(pin_t pin); + // + // ADC Methods + // + + static int8_t adc_select; + + // Called by Temperature::init once at startup + static void adc_init(); + + // Called by Temperature::init for each sensor at startup + static void adc_enable(const pin_t pin) {} + + // Begin ADC sampling on the given channel + static void adc_start(const pin_t pin); + + // Is the ADC ready for reading? + static bool adc_ready() { return true; } + + // The current value of the ADC register + static uint16_t adc_value(); + + /** + * Set the PWM duty cycle for the pin to the given value. + * No option to invert the duty cycle [default = false] + * No option to change the scale of the provided value to enable finer PWM duty control [default = 255] + */ + static void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) { + analogWrite(pin, v); + } + +}; diff --git a/Marlin/src/HAL/TEENSY40_41/timers.h b/Marlin/src/HAL/TEENSY40_41/timers.h index 81cf67f7bc08..77fe0953d3bd 100644 --- a/Marlin/src/HAL/TEENSY40_41/timers.h +++ b/Marlin/src/HAL/TEENSY40_41/timers.h @@ -114,4 +114,4 @@ bool HAL_timer_interrupt_enabled(const uint8_t timer_num); void HAL_timer_isr_prologue(const uint8_t timer_num); //void HAL_timer_isr_epilogue(const uint8_t timer_num) {} -#define HAL_timer_isr_epilogue(T) +#define HAL_timer_isr_epilogue(T) NOOP diff --git a/Marlin/src/HAL/shared/HAL.cpp b/Marlin/src/HAL/shared/HAL.cpp new file mode 100644 index 000000000000..4d92aedd9a1f --- /dev/null +++ b/Marlin/src/HAL/shared/HAL.cpp @@ -0,0 +1,36 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * HAL/shared/HAL.cpp + */ + +#include "../../inc/MarlinConfig.h" + +MarlinHAL hal; + +#if ENABLED(SOFT_RESET_VIA_SERIAL) + + // Global for use by e_parser.h + void HAL_reboot() { hal.reboot(); } + +#endif diff --git a/Marlin/src/HAL/shared/HAL_spi_L6470.cpp b/Marlin/src/HAL/shared/HAL_spi_L6470.cpp index bd85dbe7bd7e..5d4ce89b2748 100644 --- a/Marlin/src/HAL/shared/HAL_spi_L6470.cpp +++ b/Marlin/src/HAL/shared/HAL_spi_L6470.cpp @@ -92,9 +92,9 @@ uint8_t L64XX_Marlin::transfer_single(uint8_t data, int16_t ss_pin) { // First device in chain has data sent last extDigitalWrite(ss_pin, LOW); - DISABLE_ISRS(); // Disable interrupts during SPI transfer (can't allow partial command to chips) + hal.isr_off(); // Disable interrupts during SPI transfer (can't allow partial command to chips) const uint8_t data_out = L6470_SpiTransfer_Mode_3(data); - ENABLE_ISRS(); // Enable interrupts + hal.isr_on(); // Enable interrupts extDigitalWrite(ss_pin, HIGH); return data_out; @@ -107,9 +107,9 @@ uint8_t L64XX_Marlin::transfer_chain(uint8_t data, int16_t ss_pin, uint8_t chain extDigitalWrite(ss_pin, LOW); for (uint8_t i = L64XX::chain[0]; !L64xxManager.spi_abort && i >= 1; i--) { // Send data unless aborted - DISABLE_ISRS(); // Disable interrupts during SPI transfer (can't allow partial command to chips) + hal.isr_off(); // Disable interrupts during SPI transfer (can't allow partial command to chips) const uint8_t temp = L6470_SpiTransfer_Mode_3(uint8_t(i == chain_position ? data : dSPIN_NOP)); - ENABLE_ISRS(); // Enable interrupts + hal.isr_on(); // Enable interrupts if (i == chain_position) data_out = temp; } diff --git a/Marlin/src/HAL/shared/math_32bit.h b/Marlin/src/HAL/shared/math_32bit.h index 87e9e6406ee4..1fb233e3e896 100644 --- a/Marlin/src/HAL/shared/math_32bit.h +++ b/Marlin/src/HAL/shared/math_32bit.h @@ -26,6 +26,6 @@ /** * Math helper functions for 32 bit CPUs */ -static FORCE_INLINE uint32_t MultiU32X24toH32(uint32_t longIn1, uint32_t longIn2) { +FORCE_INLINE static uint32_t MultiU32X24toH32(uint32_t longIn1, uint32_t longIn2) { return ((uint64_t)longIn1 * longIn2 + 0x00800000) >> 24; } diff --git a/Marlin/src/MarlinCore.cpp b/Marlin/src/MarlinCore.cpp index 02cf6d28d311..482ad95cac5a 100644 --- a/Marlin/src/MarlinCore.cpp +++ b/Marlin/src/MarlinCore.cpp @@ -790,7 +790,7 @@ void idle(bool no_stepper_sleep/*=false*/) { #endif // Run HAL idle tasks - TERN_(HAL_IDLETASK, HAL_idletask()); + hal.idletask(); // Check network connection TERN_(HAS_ETHERNET, ethernet.check()); @@ -929,7 +929,7 @@ void minkill(const bool steppers_off/*=false*/) { watchdog_refresh(); // Reboot the board - HAL_reboot(); + hal.reboot(); #else @@ -1041,7 +1041,7 @@ inline void tmc_standby_setup() { * • L64XX Stepper Drivers (SPI) * • Stepper Driver Reset: DISABLE * • TMC Stepper Drivers (SPI) - * • Run BOARD_INIT if defined + * • Run hal.init_board() for additional pins setup * • ESP WiFi * - Get the Reset Reason and report it * - Print startup messages and diagnostics @@ -1119,8 +1119,8 @@ void setup() { tmc_standby_setup(); // TMC Low Power Standby pins must be set early or they're not usable // Check startup - does nothing if bootloader sets MCUSR to 0 - const byte mcu = HAL_get_reset_source(); - HAL_clear_reset_source(); + const byte mcu = hal.get_reset_source(); + hal.clear_reset_source(); #if ENABLED(MARLIN_DEV_MODE) auto log_current_ms = [&](PGM_P const msg) { @@ -1181,23 +1181,20 @@ void setup() { JTAGSWD_RESET(); #endif - #if EITHER(DISABLE_DEBUG, DISABLE_JTAG) + // Disable any hardware debug to free up pins for IO + #if ENABLED(DISABLE_DEBUG) && defined(JTAGSWD_DISABLE) delay(10); - // Disable any hardware debug to free up pins for IO - #if ENABLED(DISABLE_DEBUG) && defined(JTAGSWD_DISABLE) - SETUP_LOG("JTAGSWD_DISABLE"); - JTAGSWD_DISABLE(); - #elif defined(JTAG_DISABLE) - SETUP_LOG("JTAG_DISABLE"); - JTAG_DISABLE(); - #else - #error "DISABLE_(DEBUG|JTAG) is not supported for the selected MCU/Board." - #endif + SETUP_LOG("JTAGSWD_DISABLE"); + JTAGSWD_DISABLE(); + #elif ENABLED(DISABLE_JTAG) && defined(JTAG_DISABLE) + delay(10); + SETUP_LOG("JTAG_DISABLE"); + JTAG_DISABLE(); #endif TERN_(DYNAMIC_VECTORTABLE, hook_cpu_exceptions()); // If supported, install Marlin exception handlers at runtime - SETUP_RUN(HAL_init()); + SETUP_RUN(hal.init()); // Init and disable SPI thermocouples; this is still needed #if TEMP_SENSOR_0_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E0)) @@ -1243,19 +1240,16 @@ void setup() { SETUP_RUN(tmc_init_cs_pins()); #endif - #ifdef BOARD_INIT - SETUP_LOG("BOARD_INIT"); - BOARD_INIT(); - #endif + SETUP_RUN(hal.init_board()); SETUP_RUN(esp_wifi_init()); // Report Reset Reason - if (mcu & RST_POWER_ON) SERIAL_ECHOLNPGM(STR_POWERUP); - if (mcu & RST_EXTERNAL) SERIAL_ECHOLNPGM(STR_EXTERNAL_RESET); + if (mcu & RST_POWER_ON) SERIAL_ECHOLNPGM(STR_POWERUP); + if (mcu & RST_EXTERNAL) SERIAL_ECHOLNPGM(STR_EXTERNAL_RESET); if (mcu & RST_BROWN_OUT) SERIAL_ECHOLNPGM(STR_BROWNOUT_RESET); - if (mcu & RST_WATCHDOG) SERIAL_ECHOLNPGM(STR_WATCHDOG_RESET); - if (mcu & RST_SOFTWARE) SERIAL_ECHOLNPGM(STR_SOFTWARE_RESET); + if (mcu & RST_WATCHDOG) SERIAL_ECHOLNPGM(STR_WATCHDOG_RESET); + if (mcu & RST_SOFTWARE) SERIAL_ECHOLNPGM(STR_SOFTWARE_RESET); // Identify myself as Marlin x.x.x SERIAL_ECHOLNPGM("Marlin " SHORT_BUILD_VERSION); @@ -1266,7 +1260,7 @@ void setup() { ); #endif SERIAL_ECHO_MSG(" Compiled: " __DATE__); - SERIAL_ECHO_MSG(STR_FREE_MEMORY, freeMemory(), STR_PLANNER_BUFFER_BYTES, sizeof(block_t) * (BLOCK_BUFFER_SIZE)); + SERIAL_ECHO_MSG(STR_FREE_MEMORY, hal.freeMemory(), STR_PLANNER_BUFFER_BYTES, sizeof(block_t) * (BLOCK_BUFFER_SIZE)); // Some HAL need precise delay adjustment calibrate_delay_loop(); @@ -1542,7 +1536,7 @@ void setup() { #endif #if ENABLED(USE_WATCHDOG) - SETUP_RUN(watchdog_init()); // Reinit watchdog after HAL_get_reset_source call + SETUP_RUN(watchdog_init()); // Reinit watchdog after hal.get_reset_source call #endif #if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) diff --git a/Marlin/src/feature/caselight.cpp b/Marlin/src/feature/caselight.cpp index 57b2d0f83c61..eb580a6d6269 100644 --- a/Marlin/src/feature/caselight.cpp +++ b/Marlin/src/feature/caselight.cpp @@ -79,7 +79,7 @@ void CaseLight::update(const bool sflag) { #if CASELIGHT_USES_BRIGHTNESS if (pin_is_pwm()) - set_pwm_duty(pin_t(CASE_LIGHT_PIN), ( + hal.set_pwm_duty(pin_t(CASE_LIGHT_PIN), ( #if CASE_LIGHT_MAX_PWM == 255 n10ct #else diff --git a/Marlin/src/feature/controllerfan.cpp b/Marlin/src/feature/controllerfan.cpp index 59ba665e1114..f42bf52ae40a 100644 --- a/Marlin/src/feature/controllerfan.cpp +++ b/Marlin/src/feature/controllerfan.cpp @@ -76,7 +76,7 @@ void ControllerFan::update() { thermalManager.soft_pwm_controller_speed = speed; #else if (PWM_PIN(CONTROLLER_FAN_PIN)) - set_pwm_duty(pin_t(CONTROLLER_FAN_PIN), speed); + hal.set_pwm_duty(pin_t(CONTROLLER_FAN_PIN), speed); else WRITE(CONTROLLER_FAN_PIN, speed > 0); #endif diff --git a/Marlin/src/feature/e_parser.h b/Marlin/src/feature/e_parser.h index 1dee0cf7550c..fda1ba144bc4 100644 --- a/Marlin/src/feature/e_parser.h +++ b/Marlin/src/feature/e_parser.h @@ -41,7 +41,9 @@ extern bool wait_for_user, wait_for_heatup; void quickresume_stepper(); #endif -void HAL_reboot(); +#if ENABLED(SOFT_RESET_VIA_SERIAL) + void HAL_reboot(); +#endif class EmergencyParser { diff --git a/Marlin/src/feature/leds/leds.cpp b/Marlin/src/feature/leds/leds.cpp index 715f51f442c8..2a53a7c884e6 100644 --- a/Marlin/src/feature/leds/leds.cpp +++ b/Marlin/src/feature/leds/leds.cpp @@ -129,11 +129,11 @@ void LEDLights::set_color(const LEDColor &incol // This variant uses 3-4 separate pins for the RGB(W) components. // If the pins can do PWM then their intensity will be set. - #define _UPDATE_RGBW(C,c) do { \ - if (PWM_PIN(RGB_LED_##C##_PIN)) \ - set_pwm_duty(pin_t(RGB_LED_##C##_PIN), c); \ - else \ - WRITE(RGB_LED_##C##_PIN, c ? HIGH : LOW); \ + #define _UPDATE_RGBW(C,c) do { \ + if (PWM_PIN(RGB_LED_##C##_PIN)) \ + hal.set_pwm_duty(pin_t(RGB_LED_##C##_PIN), c); \ + else \ + WRITE(RGB_LED_##C##_PIN, c ? HIGH : LOW); \ }while(0) #define UPDATE_RGBW(C,c) _UPDATE_RGBW(C, TERN1(CASE_LIGHT_USE_RGB_LED, caselight.on) ? incol.c : 0) UPDATE_RGBW(R,r); UPDATE_RGBW(G,g); UPDATE_RGBW(B,b); diff --git a/Marlin/src/feature/spindle_laser.cpp b/Marlin/src/feature/spindle_laser.cpp index 9ca7cb948e69..52bb471b0f7e 100644 --- a/Marlin/src/feature/spindle_laser.cpp +++ b/Marlin/src/feature/spindle_laser.cpp @@ -66,10 +66,10 @@ void SpindleLaser::init() { #endif #if ENABLED(SPINDLE_LASER_USE_PWM) SET_PWM(SPINDLE_LASER_PWM_PIN); - set_pwm_duty(pin_t(SPINDLE_LASER_PWM_PIN), SPINDLE_LASER_PWM_OFF); // Set to lowest speed + hal.set_pwm_duty(pin_t(SPINDLE_LASER_PWM_PIN), SPINDLE_LASER_PWM_OFF); // Set to lowest speed #endif #if ENABLED(HAL_CAN_SET_PWM_FREQ) && SPINDLE_LASER_FREQUENCY - set_pwm_frequency(pin_t(SPINDLE_LASER_PWM_PIN), SPINDLE_LASER_FREQUENCY); + hal.set_pwm_frequency(pin_t(SPINDLE_LASER_PWM_PIN), SPINDLE_LASER_FREQUENCY); TERN_(MARLIN_DEV_MODE, frequency = SPINDLE_LASER_FREQUENCY); #endif #if ENABLED(AIR_EVACUATION) @@ -89,9 +89,9 @@ void SpindleLaser::init() { */ void SpindleLaser::_set_ocr(const uint8_t ocr) { #if ENABLED(HAL_CAN_SET_PWM_FREQ) && SPINDLE_LASER_FREQUENCY - set_pwm_frequency(pin_t(SPINDLE_LASER_PWM_PIN), TERN(MARLIN_DEV_MODE, frequency, SPINDLE_LASER_FREQUENCY)); + hal.set_pwm_frequency(pin_t(SPINDLE_LASER_PWM_PIN), TERN(MARLIN_DEV_MODE, frequency, SPINDLE_LASER_FREQUENCY)); #endif - set_pwm_duty(pin_t(SPINDLE_LASER_PWM_PIN), ocr ^ SPINDLE_LASER_PWM_OFF); + hal.set_pwm_duty(pin_t(SPINDLE_LASER_PWM_PIN), ocr ^ SPINDLE_LASER_PWM_OFF); } void SpindleLaser::set_ocr(const uint8_t ocr) { diff --git a/Marlin/src/feature/spindle_laser.h b/Marlin/src/feature/spindle_laser.h index 89e11fca0851..e948d2d37b73 100644 --- a/Marlin/src/feature/spindle_laser.h +++ b/Marlin/src/feature/spindle_laser.h @@ -103,7 +103,7 @@ class SpindleLaser { static void init(); #if ENABLED(MARLIN_DEV_MODE) - static void refresh_frequency() { set_pwm_frequency(pin_t(SPINDLE_LASER_PWM_PIN), frequency); } + static void refresh_frequency() { hal.set_pwm_frequency(pin_t(SPINDLE_LASER_PWM_PIN), frequency); } #endif // Modifying this function should update everywhere diff --git a/Marlin/src/gcode/control/M42.cpp b/Marlin/src/gcode/control/M42.cpp index 8de3226924a6..1b3a29d10056 100644 --- a/Marlin/src/gcode/control/M42.cpp +++ b/Marlin/src/gcode/control/M42.cpp @@ -126,10 +126,10 @@ void GcodeSuite::M42() { extDigitalWrite(pin, pin_status); #ifdef ARDUINO_ARCH_STM32 - // A simple I/O will be set to 0 by set_pwm_duty() + // A simple I/O will be set to 0 by hal.set_pwm_duty() if (pin_status <= 1 && !PWM_PIN(pin)) return; #endif - set_pwm_duty(pin, pin_status); + hal.set_pwm_duty(pin, pin_status); } #endif // DIRECT_PIN_CONTROL diff --git a/Marlin/src/gcode/gcode_d.cpp b/Marlin/src/gcode/gcode_d.cpp index 204455e65ec6..2dd1de00013b 100644 --- a/Marlin/src/gcode/gcode_d.cpp +++ b/Marlin/src/gcode/gcode_d.cpp @@ -38,7 +38,7 @@ #include "../sd/cardreader.h" #include "../MarlinCore.h" // for kill -extern void dump_delay_accuracy_check(); +void dump_delay_accuracy_check(); /** * Dn: G-code for development and testing @@ -54,7 +54,7 @@ void GcodeSuite::D(const int16_t dcode) { for (;;) { /* loop forever (watchdog reset) */ } case 0: - HAL_reboot(); + hal.reboot(); break; case 10: @@ -74,7 +74,7 @@ void GcodeSuite::D(const int16_t dcode) { settings.reset(); settings.save(); #endif - HAL_reboot(); + hal.reboot(); } break; case 2: { // D2 Read / Write SRAM @@ -189,12 +189,12 @@ void GcodeSuite::D(const int16_t dcode) { SERIAL_ECHOLNPGM("(USE_WATCHDOG " TERN(USE_WATCHDOG, "ENABLED", "DISABLED") ")"); thermalManager.disable_all_heaters(); delay(1000); // Allow time to print - DISABLE_ISRS(); + hal.isr_off(); // Use a low-level delay that does not rely on interrupts to function // Do not spin forever, to avoid thermal risks if heaters are enabled and // watchdog does not work. for (int i = 10000; i--;) DELAY_US(1000UL); - ENABLE_ISRS(); + hal.isr_on(); SERIAL_ECHOLNPGM("FAILURE: Watchdog did not trigger board reset."); } break; diff --git a/Marlin/src/inc/MarlinConfig.h b/Marlin/src/inc/MarlinConfig.h index 8fdb4b9baeae..505a0682ebaa 100644 --- a/Marlin/src/inc/MarlinConfig.h +++ b/Marlin/src/inc/MarlinConfig.h @@ -29,6 +29,7 @@ #ifndef __MARLIN_DEPS__ #include "../HAL/HAL.h" + extern MarlinHAL hal; #endif #include "../pins/pins.h" diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index 8f6843eee989..9c74ce32db82 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -3891,3 +3891,10 @@ static_assert(_PLUS_TEST(4), "HOMING_FEEDRATE_MM_M values must be positive."); #undef _TEST_PWM #undef _LINEAR_AXES_STR #undef _LOGICAL_AXES_STR + +// JTAG support in the HAL +#if ENABLED(DISABLE_DEBUG) && !defined(JTAGSWD_DISABLE) + #error "DISABLE_DEBUG is not supported for the selected MCU/Board." +#elif ENABLED(DISABLE_JTAG) && !defined(JTAG_DISABLE) + #error "DISABLE_JTAG is not supported for the selected MCU/Board." +#endif diff --git a/Marlin/src/lcd/dogm/marlinui_DOGM.cpp b/Marlin/src/lcd/dogm/marlinui_DOGM.cpp index aafc4d880318..fc862e54398b 100644 --- a/Marlin/src/lcd/dogm/marlinui_DOGM.cpp +++ b/Marlin/src/lcd/dogm/marlinui_DOGM.cpp @@ -282,9 +282,9 @@ void MarlinUI::init_lcd() { #if PIN_EXISTS(LCD_RESET) // Perform a clean hardware reset with needed delays OUT_WRITE(LCD_RESET_PIN, LOW); - _delay_ms(5); + hal.delay_ms(5); WRITE(LCD_RESET_PIN, HIGH); - _delay_ms(5); + hal.delay_ms(5); u8g.begin(); #endif diff --git a/Marlin/src/lcd/e3v2/proui/dwin.cpp b/Marlin/src/lcd/e3v2/proui/dwin.cpp index 4d7f38171d0a..d65fa9ec7997 100644 --- a/Marlin/src/lcd/e3v2/proui/dwin.cpp +++ b/Marlin/src/lcd/e3v2/proui/dwin.cpp @@ -2206,7 +2206,7 @@ void RebootPrinter() { thermalManager.disable_all_heaters(); planner.finish_and_disable(); DWIN_RebootScreen(); - HAL_reboot(); + hal.reboot(); } void Goto_Info_Menu(){ diff --git a/Marlin/src/module/endstops.cpp b/Marlin/src/module/endstops.cpp index bce27dc88a15..3dd6d8aeb685 100644 --- a/Marlin/src/module/endstops.cpp +++ b/Marlin/src/module/endstops.cpp @@ -1348,7 +1348,7 @@ void Endstops::update() { ES_REPORT_CHANGE(K_MAX); #endif SERIAL_ECHOLNPGM("\n"); - set_pwm_duty(pin_t(LED_PIN), local_LED_status); + hal.set_pwm_duty(pin_t(LED_PIN), local_LED_status); local_LED_status ^= 255; old_live_state_local = live_state_local; } diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp index f9ddcf8f13b5..d2e11f62fefe 100644 --- a/Marlin/src/module/planner.cpp +++ b/Marlin/src/module/planner.cpp @@ -703,7 +703,7 @@ void Planner::init() { // All other 32-bit MPUs can easily do inverse using hardware division, // so we don't need to reduce precision or to use assembly language at all. // This routine, for all other archs, returns 0x100000000 / d ~= 0xFFFFFFFF / d - static FORCE_INLINE uint32_t get_period_inverse(const uint32_t d) { + FORCE_INLINE static uint32_t get_period_inverse(const uint32_t d) { return d ? 0xFFFFFFFF / d : 0xFFFFFFFF; } #endif @@ -1260,7 +1260,7 @@ void Planner::recalculate() { #if ENABLED(FAN_SOFT_PWM) #define _FAN_SET(F) thermalManager.soft_pwm_amount_fan[F] = CALC_FAN_SPEED(F); #else - #define _FAN_SET(F) set_pwm_duty(pin_t(FAN##F##_PIN), CALC_FAN_SPEED(F)); + #define _FAN_SET(F) hal.set_pwm_duty(pin_t(FAN##F##_PIN), CALC_FAN_SPEED(F)); #endif #define FAN_SET(F) do{ kickstart_fan(fan_speed, ms, F); _FAN_SET(F); }while(0) @@ -1397,8 +1397,8 @@ void Planner::check_axes_activity() { TERN_(AUTOTEMP, autotemp_task()); #if ENABLED(BARICUDA) - TERN_(HAS_HEATER_1, set_pwm_duty(pin_t(HEATER_1_PIN), tail_valve_pressure)); - TERN_(HAS_HEATER_2, set_pwm_duty(pin_t(HEATER_2_PIN), tail_e_to_p_pressure)); + TERN_(HAS_HEATER_1, hal.set_pwm_duty(pin_t(HEATER_1_PIN), tail_valve_pressure)); + TERN_(HAS_HEATER_2, hal.set_pwm_duty(pin_t(HEATER_2_PIN), tail_e_to_p_pressure)); #endif } diff --git a/Marlin/src/module/servo.cpp b/Marlin/src/module/servo.cpp index 231efe84e1f2..96d5ba9da837 100644 --- a/Marlin/src/module/servo.cpp +++ b/Marlin/src/module/servo.cpp @@ -30,7 +30,7 @@ #include "servo.h" -HAL_SERVO_LIB servo[NUM_SERVOS]; +hal_servo_t servo[NUM_SERVOS]; #if ENABLED(EDITABLE_SERVO_ANGLES) uint16_t servo_angles[NUM_SERVOS][2]; diff --git a/Marlin/src/module/servo.h b/Marlin/src/module/servo.h index 73dbbdddb729..cd55a317a275 100644 --- a/Marlin/src/module/servo.h +++ b/Marlin/src/module/servo.h @@ -112,5 +112,5 @@ #define MOVE_SERVO(I, P) servo[I].move(P) #define DETACH_SERVO(I) servo[I].detach() -extern HAL_SERVO_LIB servo[NUM_SERVOS]; +extern hal_servo_t servo[NUM_SERVOS]; void servo_init(); diff --git a/Marlin/src/module/stepper.cpp b/Marlin/src/module/stepper.cpp index 5da06a5e5078..a96ed3a6512b 100644 --- a/Marlin/src/module/stepper.cpp +++ b/Marlin/src/module/stepper.cpp @@ -1474,7 +1474,7 @@ void Stepper::isr() { #ifndef __AVR__ // Disable interrupts, to avoid ISR preemption while we reprogram the period // (AVR enters the ISR with global interrupts disabled, so no need to do it here) - DISABLE_ISRS(); + hal.isr_off(); #endif // Program timer compare for the maximum period, so it does NOT @@ -1492,7 +1492,7 @@ void Stepper::isr() { hal_timer_t min_ticks; do { // Enable ISRs to reduce USART processing latency - ENABLE_ISRS(); + hal.isr_on(); if (!nextMainISR) pulse_phase_isr(); // 0 = Do coordinated axes Stepper pulses @@ -1576,7 +1576,7 @@ void Stepper::isr() { * is less than the current count due to something preempting between the * read and the write of the new period value). */ - DISABLE_ISRS(); + hal.isr_off(); /** * Get the current tick value + margin @@ -1611,7 +1611,7 @@ void Stepper::isr() { HAL_timer_set_compare(MF_TIMER_STEP, hal_timer_t(next_isr_ticks)); // Don't forget to finally reenable interrupts - ENABLE_ISRS(); + hal.isr_on(); } #if MINIMUM_STEPPER_PULSE || MAXIMUM_STEPPER_RATE @@ -3260,33 +3260,33 @@ void Stepper::report_positions() { #elif HAS_MOTOR_CURRENT_PWM - #define _WRITE_CURRENT_PWM_DUTY(P) set_pwm_duty(pin_t(MOTOR_CURRENT_PWM_## P ##_PIN), 255L * current / (MOTOR_CURRENT_PWM_RANGE)) + #define _WRITE_CURRENT_PWM(P) hal.set_pwm_duty(pin_t(MOTOR_CURRENT_PWM_## P ##_PIN), 255L * current / (MOTOR_CURRENT_PWM_RANGE)) switch (driver) { case 0: #if PIN_EXISTS(MOTOR_CURRENT_PWM_X) - _WRITE_CURRENT_PWM_DUTY(X); + _WRITE_CURRENT_PWM(X); #endif #if PIN_EXISTS(MOTOR_CURRENT_PWM_Y) - _WRITE_CURRENT_PWM_DUTY(Y); + _WRITE_CURRENT_PWM(Y); #endif #if PIN_EXISTS(MOTOR_CURRENT_PWM_XY) - _WRITE_CURRENT_PWM_DUTY(XY); + _WRITE_CURRENT_PWM(XY); #endif break; case 1: #if PIN_EXISTS(MOTOR_CURRENT_PWM_Z) - _WRITE_CURRENT_PWM_DUTY(Z); + _WRITE_CURRENT_PWM(Z); #endif break; case 2: #if PIN_EXISTS(MOTOR_CURRENT_PWM_E) - _WRITE_CURRENT_PWM_DUTY(E); + _WRITE_CURRENT_PWM(E); #endif #if PIN_EXISTS(MOTOR_CURRENT_PWM_E0) - _WRITE_CURRENT_PWM_DUTY(E0); + _WRITE_CURRENT_PWM(E0); #endif #if PIN_EXISTS(MOTOR_CURRENT_PWM_E1) - _WRITE_CURRENT_PWM_DUTY(E1); + _WRITE_CURRENT_PWM(E1); #endif break; } @@ -3308,7 +3308,7 @@ void Stepper::report_positions() { #ifdef __SAM3X8E__ #define _RESET_CURRENT_PWM_FREQ(P) NOOP #else - #define _RESET_CURRENT_PWM_FREQ(P) set_pwm_frequency(pin_t(P), MOTOR_CURRENT_PWM_FREQUENCY) + #define _RESET_CURRENT_PWM_FREQ(P) hal.set_pwm_frequency(pin_t(P), MOTOR_CURRENT_PWM_FREQUENCY) #endif #define INIT_CURRENT_PWM(P) do{ SET_PWM(MOTOR_CURRENT_PWM_## P ##_PIN); _RESET_CURRENT_PWM_FREQ(MOTOR_CURRENT_PWM_## P ##_PIN); }while(0) diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp index 4ccd984b0d36..19501bce6e81 100644 --- a/Marlin/src/module/temperature.cpp +++ b/Marlin/src/module/temperature.cpp @@ -327,7 +327,7 @@ PGMSTR(str_t_heating_failed, STR_T_HEATING_FAILED); #define _INIT_FAN_PIN(P) do{ if (PWM_PIN(P)) SET_PWM(P); else _INIT_SOFT_FAN(P); }while(0) #endif #if ENABLED(FAST_PWM_FAN) - #define SET_FAST_PWM_FREQ(P) set_pwm_frequency(P, FAST_PWM_FAN_FREQUENCY) + #define SET_FAST_PWM_FREQ(P) hal.set_pwm_frequency(pin_t(P), FAST_PWM_FAN_FREQUENCY) #else #define SET_FAST_PWM_FREQ(P) NOOP #endif @@ -818,7 +818,7 @@ volatile bool Temperature::raw_temps_ready = false; } // Run HAL idle tasks - TERN_(HAL_IDLETASK, HAL_idletask()); + hal.idletask(); // Run UI update TERN(HAS_DWIN_E3V2_BASIC, DWIN_Update(), ui.update()); @@ -907,7 +907,7 @@ int16_t Temperature::getHeaterPower(const heater_id_t heater_id) { #define _UPDATE_AUTO_FAN(P,D,A) do{ \ if (PWM_PIN(P##_AUTO_FAN_PIN) && A < 255) \ - set_pwm_duty(pin_t(P##_AUTO_FAN_PIN), D ? A : 0); \ + hal.set_pwm_duty(pin_t(P##_AUTO_FAN_PIN), D ? A : 0); \ else \ WRITE(P##_AUTO_FAN_PIN, D); \ }while(0) @@ -2321,74 +2321,33 @@ void Temperature::init() { TERN_(HAS_MAXTC_SW_SPI, max_tc_spi.init()); - HAL_adc_init(); + hal.adc_init(); + + TERN_(HAS_TEMP_ADC_0, hal.adc_enable(TEMP_0_PIN)); + TERN_(HAS_TEMP_ADC_1, hal.adc_enable(TEMP_1_PIN)); + TERN_(HAS_TEMP_ADC_2, hal.adc_enable(TEMP_2_PIN)); + TERN_(HAS_TEMP_ADC_3, hal.adc_enable(TEMP_3_PIN)); + TERN_(HAS_TEMP_ADC_4, hal.adc_enable(TEMP_4_PIN)); + TERN_(HAS_TEMP_ADC_5, hal.adc_enable(TEMP_5_PIN)); + TERN_(HAS_TEMP_ADC_6, hal.adc_enable(TEMP_6_PIN)); + TERN_(HAS_TEMP_ADC_7, hal.adc_enable(TEMP_7_PIN)); + TERN_(HAS_JOY_ADC_X, hal.adc_enable(JOY_X_PIN)); + TERN_(HAS_JOY_ADC_Y, hal.adc_enable(JOY_Y_PIN)); + TERN_(HAS_JOY_ADC_Z, hal.adc_enable(JOY_Z_PIN)); + TERN_(HAS_TEMP_ADC_BED, hal.adc_enable(TEMP_BED_PIN)); + TERN_(HAS_TEMP_ADC_CHAMBER, hal.adc_enable(TEMP_CHAMBER_PIN)); + TERN_(HAS_TEMP_ADC_PROBE, hal.adc_enable(TEMP_PROBE_PIN)); + TERN_(HAS_TEMP_ADC_COOLER, hal.adc_enable(TEMP_COOLER_PIN)); + TERN_(HAS_TEMP_ADC_BOARD, hal.adc_enable(TEMP_BOARD_PIN)); + TERN_(HAS_TEMP_ADC_REDUNDANT, hal.adc_enable(TEMP_REDUNDANT_PIN)); + TERN_(FILAMENT_WIDTH_SENSOR, hal.adc_enable(FILWIDTH_PIN)); + TERN_(HAS_ADC_BUTTONS, hal.adc_enable(ADC_KEYPAD_PIN)); + TERN_(POWER_MONITOR_CURRENT, hal.adc_enable(POWER_MONITOR_CURRENT_PIN)); + TERN_(POWER_MONITOR_VOLTAGE, hal.adc_enable(POWER_MONITOR_VOLTAGE_PIN)); - #if HAS_TEMP_ADC_0 - HAL_ANALOG_SELECT(TEMP_0_PIN); - #endif - #if HAS_TEMP_ADC_1 - HAL_ANALOG_SELECT(TEMP_1_PIN); - #endif - #if HAS_TEMP_ADC_2 - HAL_ANALOG_SELECT(TEMP_2_PIN); - #endif - #if HAS_TEMP_ADC_3 - HAL_ANALOG_SELECT(TEMP_3_PIN); - #endif - #if HAS_TEMP_ADC_4 - HAL_ANALOG_SELECT(TEMP_4_PIN); - #endif - #if HAS_TEMP_ADC_5 - HAL_ANALOG_SELECT(TEMP_5_PIN); - #endif - #if HAS_TEMP_ADC_6 - HAL_ANALOG_SELECT(TEMP_6_PIN); - #endif - #if HAS_TEMP_ADC_7 - HAL_ANALOG_SELECT(TEMP_7_PIN); - #endif - #if HAS_JOY_ADC_X - HAL_ANALOG_SELECT(JOY_X_PIN); - #endif - #if HAS_JOY_ADC_Y - HAL_ANALOG_SELECT(JOY_Y_PIN); - #endif - #if HAS_JOY_ADC_Z - HAL_ANALOG_SELECT(JOY_Z_PIN); - #endif #if HAS_JOY_ADC_EN SET_INPUT_PULLUP(JOY_EN_PIN); #endif - #if HAS_TEMP_ADC_BED - HAL_ANALOG_SELECT(TEMP_BED_PIN); - #endif - #if HAS_TEMP_ADC_CHAMBER - HAL_ANALOG_SELECT(TEMP_CHAMBER_PIN); - #endif - #if HAS_TEMP_ADC_PROBE - HAL_ANALOG_SELECT(TEMP_PROBE_PIN); - #endif - #if HAS_TEMP_ADC_COOLER - HAL_ANALOG_SELECT(TEMP_COOLER_PIN); - #endif - #if HAS_TEMP_ADC_BOARD - HAL_ANALOG_SELECT(TEMP_BOARD_PIN); - #endif - #if HAS_TEMP_ADC_REDUNDANT - HAL_ANALOG_SELECT(TEMP_REDUNDANT_PIN); - #endif - #if ENABLED(FILAMENT_WIDTH_SENSOR) - HAL_ANALOG_SELECT(FILWIDTH_PIN); - #endif - #if HAS_ADC_BUTTONS - HAL_ANALOG_SELECT(ADC_KEYPAD_PIN); - #endif - #if ENABLED(POWER_MONITOR_CURRENT) - HAL_ANALOG_SELECT(POWER_MONITOR_CURRENT_PIN); - #endif - #if ENABLED(POWER_MONITOR_VOLTAGE) - HAL_ANALOG_SELECT(POWER_MONITOR_VOLTAGE_PIN); - #endif HAL_timer_start(MF_TIMER_TEMP, TEMP_TIMER_FREQUENCY); ENABLE_TEMPERATURE_INTERRUPT(); @@ -3364,8 +3323,8 @@ void Temperature::isr() { * This gives each ADC 0.9765ms to charge up. */ #define ACCUMULATE_ADC(obj) do{ \ - if (!HAL_ADC_READY()) next_sensor_state = adc_sensor_state; \ - else obj.sample(HAL_READ_ADC()); \ + if (!hal.adc_ready()) next_sensor_state = adc_sensor_state; \ + else obj.sample(hal.adc_value()); \ }while(0) ADCSensorState next_sensor_state = adc_sensor_state < SensorsReady ? (ADCSensorState)(int(adc_sensor_state) + 1) : StartSampling; @@ -3397,115 +3356,115 @@ void Temperature::isr() { break; #if HAS_TEMP_ADC_0 - case PrepareTemp_0: HAL_START_ADC(TEMP_0_PIN); break; + case PrepareTemp_0: hal.adc_start(TEMP_0_PIN); break; case MeasureTemp_0: ACCUMULATE_ADC(temp_hotend[0]); break; #endif #if HAS_TEMP_ADC_BED - case PrepareTemp_BED: HAL_START_ADC(TEMP_BED_PIN); break; + case PrepareTemp_BED: hal.adc_start(TEMP_BED_PIN); break; case MeasureTemp_BED: ACCUMULATE_ADC(temp_bed); break; #endif #if HAS_TEMP_ADC_CHAMBER - case PrepareTemp_CHAMBER: HAL_START_ADC(TEMP_CHAMBER_PIN); break; + case PrepareTemp_CHAMBER: hal.adc_start(TEMP_CHAMBER_PIN); break; case MeasureTemp_CHAMBER: ACCUMULATE_ADC(temp_chamber); break; #endif #if HAS_TEMP_ADC_COOLER - case PrepareTemp_COOLER: HAL_START_ADC(TEMP_COOLER_PIN); break; + case PrepareTemp_COOLER: hal.adc_start(TEMP_COOLER_PIN); break; case MeasureTemp_COOLER: ACCUMULATE_ADC(temp_cooler); break; #endif #if HAS_TEMP_ADC_PROBE - case PrepareTemp_PROBE: HAL_START_ADC(TEMP_PROBE_PIN); break; + case PrepareTemp_PROBE: hal.adc_start(TEMP_PROBE_PIN); break; case MeasureTemp_PROBE: ACCUMULATE_ADC(temp_probe); break; #endif #if HAS_TEMP_ADC_BOARD - case PrepareTemp_BOARD: HAL_START_ADC(TEMP_BOARD_PIN); break; + case PrepareTemp_BOARD: hal.adc_start(TEMP_BOARD_PIN); break; case MeasureTemp_BOARD: ACCUMULATE_ADC(temp_board); break; #endif #if HAS_TEMP_ADC_REDUNDANT - case PrepareTemp_REDUNDANT: HAL_START_ADC(TEMP_REDUNDANT_PIN); break; + case PrepareTemp_REDUNDANT: hal.adc_start(TEMP_REDUNDANT_PIN); break; case MeasureTemp_REDUNDANT: ACCUMULATE_ADC(temp_redundant); break; #endif #if HAS_TEMP_ADC_1 - case PrepareTemp_1: HAL_START_ADC(TEMP_1_PIN); break; + case PrepareTemp_1: hal.adc_start(TEMP_1_PIN); break; case MeasureTemp_1: ACCUMULATE_ADC(temp_hotend[1]); break; #endif #if HAS_TEMP_ADC_2 - case PrepareTemp_2: HAL_START_ADC(TEMP_2_PIN); break; + case PrepareTemp_2: hal.adc_start(TEMP_2_PIN); break; case MeasureTemp_2: ACCUMULATE_ADC(temp_hotend[2]); break; #endif #if HAS_TEMP_ADC_3 - case PrepareTemp_3: HAL_START_ADC(TEMP_3_PIN); break; + case PrepareTemp_3: hal.adc_start(TEMP_3_PIN); break; case MeasureTemp_3: ACCUMULATE_ADC(temp_hotend[3]); break; #endif #if HAS_TEMP_ADC_4 - case PrepareTemp_4: HAL_START_ADC(TEMP_4_PIN); break; + case PrepareTemp_4: hal.adc_start(TEMP_4_PIN); break; case MeasureTemp_4: ACCUMULATE_ADC(temp_hotend[4]); break; #endif #if HAS_TEMP_ADC_5 - case PrepareTemp_5: HAL_START_ADC(TEMP_5_PIN); break; + case PrepareTemp_5: hal.adc_start(TEMP_5_PIN); break; case MeasureTemp_5: ACCUMULATE_ADC(temp_hotend[5]); break; #endif #if HAS_TEMP_ADC_6 - case PrepareTemp_6: HAL_START_ADC(TEMP_6_PIN); break; + case PrepareTemp_6: hal.adc_start(TEMP_6_PIN); break; case MeasureTemp_6: ACCUMULATE_ADC(temp_hotend[6]); break; #endif #if HAS_TEMP_ADC_7 - case PrepareTemp_7: HAL_START_ADC(TEMP_7_PIN); break; + case PrepareTemp_7: hal.adc_start(TEMP_7_PIN); break; case MeasureTemp_7: ACCUMULATE_ADC(temp_hotend[7]); break; #endif #if ENABLED(FILAMENT_WIDTH_SENSOR) - case Prepare_FILWIDTH: HAL_START_ADC(FILWIDTH_PIN); break; + case Prepare_FILWIDTH: hal.adc_start(FILWIDTH_PIN); break; case Measure_FILWIDTH: - if (!HAL_ADC_READY()) next_sensor_state = adc_sensor_state; // Redo this state - else filwidth.accumulate(HAL_READ_ADC()); + if (!hal.adc_ready()) next_sensor_state = adc_sensor_state; // Redo this state + else filwidth.accumulate(hal.adc_value()); break; #endif #if ENABLED(POWER_MONITOR_CURRENT) case Prepare_POWER_MONITOR_CURRENT: - HAL_START_ADC(POWER_MONITOR_CURRENT_PIN); + hal.adc_start(POWER_MONITOR_CURRENT_PIN); break; case Measure_POWER_MONITOR_CURRENT: - if (!HAL_ADC_READY()) next_sensor_state = adc_sensor_state; // Redo this state - else power_monitor.add_current_sample(HAL_READ_ADC()); + if (!hal.adc_ready()) next_sensor_state = adc_sensor_state; // Redo this state + else power_monitor.add_current_sample(hal.adc_value()); break; #endif #if ENABLED(POWER_MONITOR_VOLTAGE) case Prepare_POWER_MONITOR_VOLTAGE: - HAL_START_ADC(POWER_MONITOR_VOLTAGE_PIN); + hal.adc_start(POWER_MONITOR_VOLTAGE_PIN); break; case Measure_POWER_MONITOR_VOLTAGE: - if (!HAL_ADC_READY()) next_sensor_state = adc_sensor_state; // Redo this state - else power_monitor.add_voltage_sample(HAL_READ_ADC()); + if (!hal.adc_ready()) next_sensor_state = adc_sensor_state; // Redo this state + else power_monitor.add_voltage_sample(hal.adc_value()); break; #endif #if HAS_JOY_ADC_X - case PrepareJoy_X: HAL_START_ADC(JOY_X_PIN); break; + case PrepareJoy_X: hal.adc_start(JOY_X_PIN); break; case MeasureJoy_X: ACCUMULATE_ADC(joystick.x); break; #endif #if HAS_JOY_ADC_Y - case PrepareJoy_Y: HAL_START_ADC(JOY_Y_PIN); break; + case PrepareJoy_Y: hal.adc_start(JOY_Y_PIN); break; case MeasureJoy_Y: ACCUMULATE_ADC(joystick.y); break; #endif #if HAS_JOY_ADC_Z - case PrepareJoy_Z: HAL_START_ADC(JOY_Z_PIN); break; + case PrepareJoy_Z: hal.adc_start(JOY_Z_PIN); break; case MeasureJoy_Z: ACCUMULATE_ADC(joystick.z); break; #endif @@ -3513,12 +3472,12 @@ void Temperature::isr() { #ifndef ADC_BUTTON_DEBOUNCE_DELAY #define ADC_BUTTON_DEBOUNCE_DELAY 16 #endif - case Prepare_ADC_KEY: HAL_START_ADC(ADC_KEYPAD_PIN); break; + case Prepare_ADC_KEY: hal.adc_start(ADC_KEYPAD_PIN); break; case Measure_ADC_KEY: - if (!HAL_ADC_READY()) + if (!hal.adc_ready()) next_sensor_state = adc_sensor_state; // redo this state else if (ADCKey_count < ADC_BUTTON_DEBOUNCE_DELAY) { - raw_ADCKey_value = HAL_READ_ADC(); + raw_ADCKey_value = hal.adc_value(); if (raw_ADCKey_value <= 900UL * HAL_ADC_RANGE / 1024UL) { NOMORE(current_ADCKey_raw, raw_ADCKey_value); ADCKey_count++; diff --git a/ini/features.ini b/ini/features.ini index c52675ff2d66..ead3f6327bf8 100644 --- a/ini/features.ini +++ b/ini/features.ini @@ -233,7 +233,7 @@ HAS_SERVOS = src_filter=+ + HAS_MICROSTEPS = src_filter=+ (ESP3D_)?WIFISUPPORT = AsyncTCP, ESP Async WebServer - ESP3DLib=https://github.com/luc-github/ESP3DLib/archive/master.zip + ESP3DLib=https://github.com/luc-github/ESP3DLib/archive/master-2.0.7.zip arduinoWebSockets=links2004/WebSockets@2.3.4 luc-github/ESP32SSDP@^1.1.1 lib_ignore=ESPAsyncTCP diff --git a/ini/native.ini b/ini/native.ini index 5355284992cb..3d196f343649 100644 --- a/ini/native.ini +++ b/ini/native.ini @@ -34,14 +34,14 @@ src_filter = ${common.default_src_filter} + [simulator_common] platform = native framework = -build_flags = ${common.build_flags} -std=gnu++17 -D__PLAT_NATIVE_SIM__ -DU8G_HAL_LINKS -I/usr/include/SDL2 -IMarlin -IMarlin/src/HAL/NATIVE_SIM/include -IMarlin/src/HAL/NATIVE_SIM/u8g +build_flags = ${common.build_flags} -std=gnu++17 -D__PLAT_NATIVE_SIM__ -DU8G_HAL_LINKS -I/usr/include/SDL2 -IMarlin -IMarlin/src/HAL/NATIVE_SIM/u8g src_build_flags = -Wall -Wno-expansion-to-defined -Wcast-align release_flags = -g0 -O3 -flto debug_build_flags = -fstack-protector-strong -g -g3 -ggdb lib_compat_mode = off src_filter = ${common.default_src_filter} + lib_deps = ${common.lib_deps} - MarlinSimUI=https://github.com/p3p/MarlinSimUI/archive/master.zip + MarlinSimUI=https://github.com/p3p/MarlinSimUI/archive/0.0.2.zip Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/marlin_sim_native.zip LiquidCrystal=https://github.com/p3p/LiquidCrystal/archive/master.zip extra_scripts = ${common.extra_scripts}