Aframe-smart-home is a demo project illustrating digital twins, using different technologies:
- WoT/Mozilla's WebThing schema to describe resources
- webthing-iotjs to simulate some sensors (only one here)
- aframe for rendering to XR devices
- aframe-webthing to update XR view from webthing
Today, the smart house is empty but has a solar pannel on the roof and we are monitoring the voltage in real time.
For demo purposes a real model of the house was used along a tiny but real solar pannel (item found in garden lamp).
The output voltage of the solar panel is measured using on board analog input and value is shared to the web using WebThing API.
Then a model can be updated by reading the actual value, the device's color is updated according to an heatmap palette:
Default application is a simulator that mock sensor(s) values.
$ npm install aframe-smart-home
$ cd node_modules/aframe-smart-home/
$ npm install && npm start
$ curl http://localhost:8888/
{ "id": "urn:dev:ops:smarthome-1234", (...)
"properties": {
"level": {
"description": "Solar sensor level",
"links": [ {
"rel": "property",
"href": "/properties/level" (...)
$ curl http://localhost:8888/properties
{"level":42}
cd aframe
npm install && PORT=42080 npm start
x-www-browser http://localhost:42080/aframe/Glitch can run this previous simulator
Any board with ADC port could be used.
Here an example on ARTIK1020 using webthing-node:
git clone --depth=1 --recursive https://github.com/rzr/aframe-smart-home
cd aframe-smart-home
make -C example/artik1020/ start
#| Listening:
#| http://localhost:8888/
#| log: ADC: level: open: null (null expected)
#| log: ADC: level: update: 0x2a : 40
#| 0.03515625 V
#| log: ADC: level: change: 48%
#| (...)In other shell value can be queried:
curl http://artik1020.local:8888/properties
#| {"level":36.69597260346487}pFor convenience this can be enabled on boot:
sudo ln -fs $PWD /usr/local/opt/aframe-smart-home
unit=aframe-smart-home
service=/usr/local/opt/aframe-smart-home/example/artik1020/aframe-smart-home.service
sudo ln -fs $service /usr/lib/systemd/system/
sudo systemctl restart $unit
sudo journalctl -xu $unitAny board with ADC port could be used.
It should be easy to adapt from supported boards of webthing-iotjs, see STM32F7 platform example.
Anyway it's possible to use it on Linux using the same simulator:
make startMozilla gateway could be also used with additional bearer token.