Sput is an unit testing framework for C/C++ that focuses on simplicity of use and maximum portability.
https://www.use-strict.de/sput-unit-testing/
This project is Sput unit testing framework port to Arduino.
- Run unit tests on any Arduino device
- Run same unit tests on desktop
- Very simple (single header file with macros)
detailed manual (in Russian): https://habr.com/post/419445/
good post on unit testing on Arduino: https://stackoverflow.com/questions/780819/how-can-i-unit-test-arduino-code#11437456
To install, just clone https://github.com/sadr0b0t/sput-ino git repo to $HOME/Arduino/libraries
cd ~/Arduino/libraries/
git clone https://github.com/sadr0b0t/sput-ino.gitand restart IDE.
Or on github page click Clone or download > Download ZIP, then install sput-ino-master.zip ZIP via Arduino library installation menu.
Basic example should appear in Arduino examples menu: File > Examples > sput-ino
For extended project layout see https://github.com/sadr0b0t/sput-ino-demo
Write some code to test
/**
* @return a plus b
*/
int a_plus_b(int a, int b) {
return a + b;
}
/**
* @return a minus b
*/
int a_minus_b(int a, int b) {
return a - b;
}
/**
* Switch led on if number is even
* @param pin len pin id
* @param num number
* @param true, if num is even
*/
bool led_on_even(int pin, int num) {
if(num % 2 == 0) {
digitalWrite(pin, HIGH);
} else {
digitalWrite(pin, LOW);
}
return num % 2 == 0;
}Write tests with sput (for more details see http://www.use-strict.de/sput-unit-testing/tutorial.html)
#include "sput.h"
/** Test a_plus_b call */
void test_a_plus_b() {
sput_fail_unless(a_plus_b(2, 2) == 4, "2 + 2 == 4");
sput_fail_unless(a_plus_b(-2, 2) == 0, "-2 + 2 == 0");
// this one would pass on 32-bit controllers and would fail on 16-bit Arduino
sput_fail_unless(a_plus_b(34000, 34000) == 68000, "34000 + 34000 == 68000");
}
/** Test a_minus_b call */
void test_a_minus_b() {
sput_fail_unless(a_minus_b(115, 6) == 109, "115 - 6 == 109");
sput_fail_unless(a_minus_b(13, 17) == -4, "13 - 17 == -4");
}
/** Test test_led_on_even call */
bool test_led_on_even() {
// 1) this test shows that we can also test code, that uses Arduino API
// 2) please, consider this test also as kind of antipattern:
// - we make here device-specific calls which may pass or fail
// on different devices
// - what we should test here is NOT that digitalWrite did MAKE changes
// to GPIO register (so we check this with device-specific
// pinMode+digitalRead), but that we did CALL digitallWrite
// with specific params in tested code (this can hardly be
// checked when we run test on device, but can easily be checked
// when we run test on desktop with Arduino API mockups).
// See desktop+mockup version of this test:
// example-desktop/mylib-test-desktoponly.cpp
// - when we run this specific test on desktop, digitalRead
// would be implemented as mockup anyway, so, probably, whatever
pinMode(13, OUTPUT);
sput_fail_unless(led_on_even(13, 2), "num=2 => led#13 on");
// would pass on desktop, might fail or pass on difference devices
// (e.g.: Arduino Due - fail, ChipKIT Uno32 - pass)
sput_fail_unless(digitalRead(13) == HIGH, "num=2 => led#13 on");
sput_fail_unless(!led_on_even(13, 5), "num=5 => led#13 off");
sput_fail_unless(digitalRead(13) == LOW, "num=5 => led#13 off");
sput_fail_unless(led_on_even(13, 18), "num=18 => led#13 on");
sput_fail_unless(digitalRead(13) == HIGH, "num=18 => led#13 on");
}Pack tests to test suites
/** Test suite for a_plus_b call */
int mylib_test_suite_a_plus_b() {
sput_start_testing();
sput_enter_suite("a plus b");
sput_run_test(test_a_plus_b);
sput_finish_testing();
return sput_get_return_value();
}
/** Test suite for a_minus_b call */
int mylib_test_suite_a_minus_b() {
sput_start_testing();
sput_enter_suite("a minus b");
sput_run_test(test_a_minus_b);
sput_finish_testing();
return sput_get_return_value();
}
/** Test suite for led_on_even call */
int mylib_test_suite_led_on_even() {
sput_start_testing();
sput_enter_suite("led on even");
sput_run_test(test_led_on_even);
sput_finish_testing();
return sput_get_return_value();
}
/** All tests in one bundle */
int mylib_test_suite() {
sput_start_testing();
sput_enter_suite("a plus b");
sput_run_test(test_a_plus_b);
sput_enter_suite("a minus b");
sput_run_test(test_a_minus_b);
sput_enter_suite("led on even");
sput_run_test(test_led_on_even);
sput_finish_testing();
return sput_get_return_value();
}Run tests on device
void run_tests() {
Serial.println("#################### Start testing...");
// comment out specific test suites if firmware does not
// fit to device memory
// Test suite for a_plus_b call
mylib_test_suite_a_plus_b();
// Test suite for a_minus_b call
mylib_test_suite_a_minus_b();
// Test suite for led_on_even call
mylib_test_suite_led_on_even();
// All tests in one bundle
//mylib_test_suite();
Serial.println("#################### Finished testing");
}Add setup/loop as usual and call test runner
void setup() {
Serial.begin(9600);
while (!Serial);
// run tests
run_tests();
// other code - kinda application business logic
Serial.println("Just show that we call functions from tested lib, nothing useful here");
pinMode(13, OUTPUT);
Serial.print("14+23=");
Serial.println(a_plus_b(14, 23));
Serial.print("14-23=");
Serial.println(a_minus_b(14, 23));
Serial.print("34000+34000=");
Serial.println(a_plus_b(34000, 34000));
}
void loop() {
static int i = 0;
led_on_even(13, i++);
delay(2000);
}Compile and upload sketch to device, watch results in serial monitor.
On ChipKIT Uno32, PIC32-based Arduino-based board:
#################### Start testing...
== Entering suite #1, "a plus b" ==
[1:1] test_a_plus_b:#1 "2 + 2 == 4" pass
[1:2] test_a_plus_b:#2 "-2 + 2 == 0" pass
[1:3] test_a_plus_b:#3 "34000 + 34000 == 68000" pass
--> 3 check(s), 3 ok, 0 failed (0.00%)
==> 3 check(s) in 1 suite(s) finished after 0.00 second(s),
3 succeeded, 0 failed (0.00%)
[SUCCESS]
== Entering suite #1, "a minus b" ==
[1:1] test_a_minus_b:#1 "115 - 6 == 109" pass
[1:2] test_a_minus_b:#2 "13 - 17 == -4" pass
--> 2 check(s), 2 ok, 0 failed (0.00%)
==> 2 check(s) in 1 suite(s) finished after 0.00 second(s),
2 succeeded, 0 failed (0.00%)
[SUCCESS]
== Entering suite #1, "led on even" ==
[1:1] test_led_on_even:#1 "num=2 => led#13 on" pass
[1:2] test_led_on_even:#2 "num=2 => led#13 on" pass
[1:3] test_led_on_even:#3 "num=5 => led#13 off" pass
[1:4] test_led_on_even:#4 "num=5 => led#13 off" pass
[1:5] test_led_on_even:#5 "num=18 => led#13 on" pass
[1:6] test_led_on_even:#6 "num=18 => led#13 on" pass
--> 6 check(s), 6 ok, 0 failed (0.00%)
==> 6 check(s) in 1 suite(s) finished after 0.00 second(s),
6 succeeded, 0 failed (0.00%)
[SUCCESS]
#################### Finished testing
Just show that we call functions from tested lib, nothing useful here
14+23=37
14-23=-9
34000+34000=68000
on Arduino Uno (AVR 16 bit int):
#################### Start testing...
== Entering suite #1, "a#################### Start testing...
== Entering suite #1, "a plus b" ==
[1:1] test_a_plus_b:#1 "2 + 2 == 4" pass
[1:2] test_a_plus_b:#2 "-2 + 2 == 0" pass
[1:3] test_a_plus_b:#3 "34000 + 34000 == 68000" FAIL
! Type: fail-unless
! Condition: a_plus_b(34000, 34000) == 68000
! Line: 14
--> 3 check(s), 2 ok, 1 failed (?%)
==> 3 check(s) in 1 suite(s) finished after ? second(s),
2 succeeded, 1 failed (?%)
[FAILURE]
== Entering suite #1, "a minus b" ==
[1:1] test_a_minus_b:#1 "115 - 6 == 109" pass
[1:2] test_a_minus_b:#2 "13 - 17 == -4" pass
--> 2 check(s), 2 ok, 0 failed (?%)
==> 2 check(s) in 1 suite(s) finished after ? second(s),
2 succeeded, 0 failed (?%)
[SUCCESS]
== Entering suite #1, "led on even" ==
[1:1] test_led_on_even:#1 "num=2 => led#13 on" pass
[1:2] test_led_on_even:#2 "num=2 => led#13 on" pass
[1:3] test_led_on_even:#3 "num=5 => led#13 off" pass
[1:4] test_led_on_even:#4 "num=5 => led#13 off" pass
[1:5] test_led_on_even:#5 "num=18 => led#13 on" pass
[1:6] test_led_on_even:#6 "num=18 => led#13 on" pass
--> 6 check(s), 6 ok, 0 failed (?%)
==> 6 check(s) in 1 suite(s) finished after ? second(s),
6 succeeded, 0 failed (?%)
[SUCCESS]
#################### Finished testing
Just show that we call functions from tested lib, nothing useful here
14+23=37
14-23=-9
34000+34000=2464
https://github.com/sadr0b0t/sput-ino/tree/master/examples/sput-ino-modules
Go to "sput-ino/example-desktop" dir https://github.com/sadr0b0t/sput-ino/tree/master/example-desktop
cd $HOME/Arduino/libraries/sput-ino/example-desktopbuild tests with gcc
#!/bin/sh
# simple build script, feel free to modify or convert it
# to your favourite build system config
#gcc -c c_file_stub.c
#g++ -std=c++11 -c cpp_file_stub.cpp
g++ -std=c++11 -c \
-I. -I../examples/sput-ino-modules -I$HOME/Arduino/libraries/sput-ino/src \
Arduino.cpp \
../examples/sput-ino-modules/mylib.cpp \
../examples/sput-ino-modules/mylib-test.cpp \
mylib-test-desktoponly.cpp \
mylib-test-main.cpp
g++ *.o -o test_mylibrun compiled tests:
./test_mylibsee result in console (identical to above).