Main_Body
,Top_Plate
, andMid_Plate
are designed to be split in half so that they can be printed on smaller printers.- You can find already split, ready to print
STL
files in theReady To Print
folder. - I recommend PLA filament, with 0.28mm layer height, and about 30% infill.
Tire.stl
should be printed with flexible TPU (95A) filament at 0.28mm layer height, and with 10% infill.
- 1X Main_Body_Center_Support_Plate.stl
- 2X Main_Body_Side_Support_Plate.stl
- 1X Ready To Print/Main_Body_Front.stl
- 1X Ready To Print/Main_Body_Back.stl
- 1X Ready To Print/Mid_Plate_Front.stl
- 1X Ready To Print/Mid_Plate_Back.stl
- 1X Top_Plate_Center_Support_Plate.stl
- 1X Ready To Print/Top_Plate_Front.stl
- 1X Ready To Print/Top_Plate_Back.stl
- 1X Back_Screw_Cover.stl
- 4X Wheel_V2.stl or Wheel_V2_Flat.stl
- 4X Tire.stl