Medium.txt

1)**Integer to Roman**  
Given an integer, convert it to a roman numeral.
Input is guaranteed to be within the range from 1 to 3999.

2)**Path Sum II**  
Given a binary tree and a sum, find all root-to-leaf paths where each path's sum equals the given sum.

3)**Kth Largest Element in an Array**  
Find the kth largest element in an unsorted array. Note that it is the kth largest element in the sorted order, not the kth distinct element.  
For example,
Given [3,2,1,5,6,4] and k = 2, return 5.

4)**Missing Number**  
Given an array containing n distinct numbers taken from 0, 1, 2, ..., n, find the one that is missing from the array.  
For example,
Given nums = [0, 1, 3] return 2.  
Note:
Your algorithm should run in linear runtime complexity. Could you implement it using only constant extra space complexity?  

5)**Count Complete Tree Nodes**  
Given a complete binary tree, count the number of nodes.  
Definition of a complete binary tree from Wikipedia:  
In a complete binary tree every level, except possibly the last, is completely filled, and all nodes in the last level are as far left as possible. It can have between 1 and 2h nodes inclusive at the last level h.  

6)**Minimum Path Sum**  
Given a m x n grid filled with non-negative numbers, find a path from top left to bottom right which minimizes the sum of all numbers along its path.  
Note: You can only move either down or right at any point in time.  

7)**Find Peak Element**  
A peak element is an element that is greater than its neighbors.
Given an input array where num[i] ≠ num[i+1], find a peak element and return its index.
The array may contain multiple peaks, in that case return the index to any one of the peaks is fine.
You may imagine that num[-1] = num[n] = -∞.  
For example, in array [1, 2, 3, 1], 3 is a peak element and your function should return the index number 2.

8) **Sum Root to Leaf Numbers**  
Given a binary tree containing digits from 0-9 only, each root-to-leaf path could represent a number.
An example is the root-to-leaf path 1->2->3 which represents the number 123.
Find the total sum of all root-to-leaf numbers.  
For example,  
    1
   / \
  2   3
The root-to-leaf path 1->2 represents the number 12.  
The root-to-leaf path 1->3 represents the number 13.  
Return the sum = 12 + 13 = 25.

9) **Path Sum II**  
Given a binary tree and a sum, find all root-to-leaf paths where each path's sum equals the given sum.
For example:
Given the below binary tree and sum = 22,
              5
             / \
            4   8
           /   / \
          11  13  4
         /  \    / \
        7    2  5   1
return
[
   [5,4,11,2],
   [5,8,4,5]
]

10) **Minimum Size Subarray Sum**  
Given an array of n positive integers and a positive integer s, find the minimal length of a subarray of which the sum ≥ s. If there isn't one, return 0 instead.
For example, given the array [2,3,1,2,4,3] and s = 7,
the subarray [4,3] has the minimal length under the problem constraint.

11) **Find Minimum in Rotated Sorted Array**  
Suppose a sorted array is rotated at some pivot unknown to you beforehand.
(i.e., 0 1 2 4 5 6 7 might become 4 5 6 7 0 1 2).
Find the minimum element.
You may assume no duplicate exists in the array.

12)**3Sum**  
Given an array S of n integers, are there elements a, b, c in S such that a + b + c = 0? Find all unique triplets in the array which gives the sum of zero.
Note: The solution set must not contain duplicate triplets.
For example, given array S = [-1, 0, 1, 2, -1, -4],
A solution set is:
[
  [-1, 0, 1],
  [-1, -1, 2]
]

13)**H-Index**  
Given an array of citations (each citation is a non-negative integer) of a researcher, write a function to compute the researcher's h-index.
According to the definition of h-index on Wikipedia: "A scientist has index h if h of his/her N papers have at least h citations each, and the other N − h papers have no more than h citations each."
For example, given citations = [3, 0, 6, 1, 5], which means the researcher has 5 papers in total and each of them had received 3, 0, 6, 1, 5 citations respectively. Since the researcher has 3 papers with at least 3 citations each and the remaining two with no more than 3 citations each, his h-index is 3.
Note: If there are several possible values for h, the maximum one is taken as the h-index.

14)**Insertion Sort Linked List**  

15)**Remove Duplicates from Sorted List II**  
Given a sorted linked list, delete all nodes that have duplicate numbers, leaving only distinct numbers from the original list.
For example,
Given 1->2->3->3->4->4->5, return 1->2->5.
Given 1->1->1->2->3, return 2->3.

16)**Odd Even Linked List**  
Given a singly linked list, group all odd nodes together followed by the even nodes. Please note here we are talking about the node number and not the value in the nodes.
You should try to do it in place. The program should run in O(1) space complexity and O(nodes) time complexity.
Example:
Given 1->2->3->4->5->NULL,
return 1->3->5->2->4->NULL.
Note:
The relative order inside both the even and odd groups should remain as it was in the input.
The first node is considered odd, the second node even and so on ...

17)**Add Two Numbers**  
You are given two linked lists representing two non-negative numbers. The digits are stored in reverse order and each of their nodes contain a single digit. Add the two numbers and return it as a linked list.

18)**Add Two Numbers II**  
You are given two linked lists representing two non-negative numbers. The most significant digit comes first and each of their nodes contain a single digit. Add the two numbers and return it as a linked list.
You may assume the two numbers do not contain any leading zero, except the number 0 itself.
Follow up:
What if you cannot modify the input lists? In other words, reversing the lists is not allowed.
Example:
Input: (7 -> 2 -> 4 -> 3) + (5 -> 6 -> 4)
Output: 7 -> 8 -> 0 -> 7

19)**Rotate List**  
Given a list, rotate the list to the right by k places, where k is non-negative.
For example:
Given 1->2->3->4->5->NULL and k = 2,
return 4->5->1->2->3->NULL.

20)**Maximum Subarray**  
Find the contiguous subarray within an array (containing at least one number) which has the largest sum.
For example, given the array [-2,1,-3,4,-1,2,1,-5,4],
the contiguous subarray [4,-1,2,1] has the largest sum = 6.


21)**Valid Perfect Square**  
Given a positive integer num, write a function which returns True if num is a perfect square else False.
Note: Do not use any built-in library function such as sqrt.

22)**Product of Array Except Self**  
Given an array of n integers where n > 1, nums, return an array output such that output[i] is equal to the product of all the elements of nums except nums[i].
Solve it without division and in O(n).
For example, given [1,2,3,4], return [24,12,8,6].
Follow up:
Could you solve it with constant space complexity? (Note: The output array does not count as extra space for the purpose of space complexity analysis.)

23)**Linked List Random Node**  
Given a singly linked list, return a random node's value from the linked list. Each node must have the same probability of being chosen.
Follow up:
What if the linked list is extremely large and its length is unknown to you? Could you solve this efficiently without using extra space?
Example:
// Init a singly linked list [1,2,3].
ListNode head = new ListNode(1);
head.next = new ListNode(2);
head.next.next = new ListNode(3);
Solution solution = new Solution(head);
// getRandom() should return either 1, 2, or 3 randomly. Each element should have equal probability of returning.
solution.getRandom();

24)**Shuffle an Array**  
Shuffle a set of numbers without duplicates.
Example:
// Init an array with set 1, 2, and 3.
int[] nums = {1,2,3};
Solution solution = new Solution(nums);
// Shuffle the array [1,2,3] and return its result. Any permutation of [1,2,3] must equally likely to be returned.
solution.shuffle();
// Resets the array back to its original configuration [1,2,3].
solution.reset();
// Returns the random shuffling of array [1,2,3].
solution.shuffle();

25)**Serialize and Deserialize BST**  
Serialization is the process of converting a data structure or object into a sequence of bits so that it can be stored in a file or memory buffer, or transmitted across a network connection link to be reconstructed later in the same or another computer environment.
Design an algorithm to serialize and deserialize a binary search tree. There is no restriction on how your serialization/deserialization algorithm should work. You just need to ensure that a binary search tree can be serialized to a string and this string can be deserialized to the original tree structure.
The encoded string should be as compact as possible.
Note: Do not use class member/global/static variables to store states. Your serialize and deserialize algorithms should be stateless.

26)**Binary Tree Inorder Traversal**  
Given a binary tree, return the inorder traversal of its nodes' values.

For example:
Given binary tree [1,null,2,3],
   1
    \
     2
    /
   3
return [1,3,2].

Note: Recursive solution is trivial, could you do it iteratively?


27) **Binary Tree Preorder Traversal**
Given a binary tree, return the preorder traversal of its nodes' values.

For example:
Given binary tree {1,#,2,3},
   1
    \
     2
    /
   3
return [1,2,3].

Note: Recursive solution is trivial, could you do it iteratively?

28)**Flatten Binary Tree to Linked List**
Given a binary tree, flatten it to a linked list in-place.

For example,
Given

         1
        / \
       2   5
      / \   \
     3   4   6
The flattened tree should look like:
   1
    \
     2
      \
       3
        \
         4
          \
           5
            \
             6
29)**Binary Search Tree Iterator**
Implement an iterator over a binary search tree (BST). Your iterator will be initialized with the root node of a BST.
Calling next() will return the next smallest number in the BST.
Note: next() and hasNext() should run in average O(1) time and uses O(h) memory, where h is the height of the tree.

30)**Verify Preorder Serialization of a Binary Tree**
One way to serialize a binary tree is to use pre-order traversal. When we encounter a non-null node, we record the node's value. If it is a null node, we record using a sentinel value such as #.
     _9_
    /   \
   3     2
  / \   / \
 4   1  #  6
/ \ / \   / \
# # # #   # #
For example, the above binary tree can be serialized to the string "9,3,4,#,#,1,#,#,2,#,6,#,#", where # represents a null node.

Given a string of comma separated values, verify whether it is a correct preorder traversal serialization of a binary tree. Find an algorithm without reconstructing the tree.

Each comma separated value in the string must be either an integer or a character '#' representing null pointer.

You may assume that the input format is always valid, for example it could never contain two consecutive commas such as "1,,3".
Example 1:
"9,3,4,#,#,1,#,#,2,#,6,#,#"
Return true
Example 2:
"1,#"
Return false
Example 3:
"9,#,#,1"
Return false

31) **Top K Frequent Elements**
Given a non-empty array of integers, return the k most frequent elements.
For example,
Given [1,1,1,2,2,3] and k = 2, return [1,2].
Note: 
You may assume k is always valid, 1 ≤ k ≤ number of unique elements.
Your algorithm's time complexity must be better than O(n log n), where n is the array's size.

32) **Merge k Sorted Lists**

33) **Integer Break**
Given a positive integer n, break it into the sum of at least two positive integers and maximize the product of those integers. Return the maximum product you can get.
For example, given n = 2, return 1 (2 = 1 + 1); given n = 10, return 36 (10 = 3 + 3 + 4).
Note: You may assume that n is not less than 2 and not larger than 58.

34) Find All Duplicates in an Array
Given an array of integers, 1 ≤ a[i] ≤ n (n = size of array), some elements appear twice and others appear once.
Find all the elements that appear twice in this array.
Could you do it without extra space and in O(n) runtime?
Example:
Input:
[4,3,2,7,8,2,3,1]
Output:
[2,3]

35)**Convert Sorted List to Binary Search Tree**
Given a singly linked list where elements are sorted in ascending order, convert it to a height balanced BST.

36) **Validate Binary Search Tree**
Given a binary tree, determine if it is a valid binary search tree (BST).
Assume a BST is defined as follows:
The left subtree of a node contains only nodes with keys less than the node's key.
The right subtree of a node contains only nodes with keys greater than the node's key.
Both the left and right subtrees must also be binary search trees.

37)**Convert Sorted Array to Binary Search Tree**
38) **Clone Graph**
Clone an undirected graph. Each node in the graph contains a label and a list of its neighbors.

39)**PeekingIterator**
Given an Iterator class interface with methods: next() and hasNext(), design and implement a PeekingIterator that support the peek() operation -- it essentially peek() at the element that will be returned by the next call to next().
Here is an example. Assume that the iterator is initialized to the beginning of the list: [1, 2, 3].
Call next() gets you 1, the first element in the list.
Now you call peek() and it returns 2, the next element. Calling next() after that still return 2.
You call next() the final time and it returns 3, the last element. Calling hasNext() after that should return false.

40)**Reconstruct Original Digits from English**
Given a non-empty string containing an out-of-order English representation of digits 0-9, output the digits in ascending order.
Note:
Input contains only lowercase English letters.
Input is guaranteed to be valid and can be transformed to its original digits. That means invalid inputs such as "abc" or "zerone" are not permitted.
Input length is less than 50,000.
Example 1:
Input: "owoztneoer"
Output: "012"
Example 2:
Input: "fviefuro"
Output: "45"

41) **Binary Tree Zigzag Level Order Traversal**
Given a binary tree, return the zigzag level order traversal of its nodes' values. (ie, from left to right, then right to left for the next level and alternate between).
For example:
Given binary tree [3,9,20,null,null,15,7],
    3
   / \
  9  20
    /  \
   15   7
return its zigzag level order traversal as:
[
  [3],
  [20,9],
  [15,7]
]
42)**Magical String** 
A magical string S consists of only '1' and '2' and obeys the following rules:
The string S is magical because concatenating the number of contiguous occurrences of characters '1' and '2' generates the string S itself.
The first few elements of string S is the following: S = "1221121221221121122……"
If we group the consecutive '1's and '2's in S, it will be:
1 22 11 2 1 22 1 22 11 2 11 22 ......
and the occurrences of '1's or '2's in each group are:
1 2	2 1 1 2 1 2 2 1 2 2 ......
You can see that the occurrence sequence above is the S itself.
Given an integer N as input, return the number of '1's in the first N number in the magical string S.
Note: N will not exceed 100,000.

43)**License Key Formatting**
Now you are given a string S, which represents a software license key which we would like to format. The string S is composed of alphanumerical characters and dashes. The dashes split the alphanumerical characters within the string into groups. (i.e. if there are M dashes, the string is split into M+1 groups). The dashes in the given string are possibly misplaced.
We want each group of characters to be of length K (except for possibly the first group, which could be shorter, but still must contain at least one character). To satisfy this requirement, we will reinsert dashes. Additionally, all the lower case letters in the string must be converted to upper case.
So, you are given a non-empty string S, representing a license key to format, and an integer K. And you need to return the license key formatted according to the description above.
Example 1:
Input: S = "2-4A0r7-4k", K = 4
Output: "24A0-R74K"
Explanation: The string S has been split into two parts, each part has 4 characters.

44)**Reverse Linked List II**
Reverse a linked list from position m to n. Do it in-place and in one-pass.
For example:
Given 1->2->3->4->5->NULL, m = 2 and n = 4,
return 1->4->3->2->5->NULL.
Note:
Given m, n satisfy the following condition:
1 ≤ m ≤ n ≤ length of list.

45)**Sort List** 
Sort a linked list in O(n log n) time using constant space complexity.

46)**Reverse Words in a String**
Given an input string, reverse the string word by word.
For example,
Given s = "the sky is blue",
return "blue is sky the".

47) **Is Subsequence**
Given a string s and a string t, check if s is subsequence of t.
You may assume that there is only lower case English letters in both s and t. t is potentially a very long (length ~= 500,000) string, and s is a short string (<=100).
A subsequence of a string is a new string which is formed from the original string by deleting some (can be none) of the characters without disturbing the relative positions of the remaining characters. (ie, "ace" is a subsequence of "abcde" while "aec" is not).

48)**Binary Tree Right Side View**
Given a binary tree, imagine yourself standing on the right side of it, return the values of the nodes you can see ordered from top to bottom.
For example:
Given the following binary tree,
   1            <---
 /   \
2     3         <---
 \     \
  5     4       <---
You should return [1, 3, 4].

49) **Populating Next Right Pointers in Each Node**
Given a binary tree
    class TreeLinkNode {
      TreeLinkNode left;
      TreeLinkNode right;
      TreeLinkNode next;
      int val;
    }
Populate each next pointer to point to its next right node. If there is no next right node, the next pointer should be set to NULL.
Initially, all next pointers are set to NULL.
Note:
You may only use constant extra space.
You may assume that it is a perfect binary tree (ie, all leaves are at the same level, and every parent has two children).
For example,
Given the following perfect binary tree,
         1
       /  \
      2    3
     / \  / \
    4  5  6  7
After calling your function, the tree should look like:
         1 -> NULL
       /  \
      2 -> 3 -> NULL
     / \  / \
    4->5->6->7 -> NULL

50)**Remove K Digits**
Given a non-negative integer num represented as a string, remove k digits from the number so that the new number is the smallest possible.
Note:
The length of num is less than 10002 and will be ≥ k.
The given num does not contain any leading zero.
Example 1:
Input: num = "1432219", k = 3
Output: "1219"
Explanation: Remove the three digits 4, 3, and 2 to form the new number 1219 which is the smallest.
Example 2:


51)**Pow(x, n)**
Implement pow(x, n).

52)**Battleships in a Board**
Given an 2D board, count how many different battleships are in it. The battleships are represented with 'X's, empty slots are represented with '.'s. You may assume the following rules:
You receive a valid board, made of only battleships or empty slots.
Battleships can only be placed horizontally or vertically. In other words, they can only be made of the shape 1xN (1 row, N columns) or Nx1 (N rows, 1 column), where N can be of any size.
At least one horizontal or vertical cell separates between two battleships - there are no adjacent battleships.
Example:
X..X
...X
...X
In the above board there are 2 battleships.
Invalid Example:
...X
XXXX
...X
This is an invalid board that you will not receive - as battleships will always have a cell separating between them.

53)**Letter Combinations of a Phone Number**
Given a digit string, return all possible letter combinations that the number could represent.
A mapping of digit to letters (just like on the telephone buttons) is given below.
Input:Digit string "23"
Output: ["ad", "ae", "af", "bd", "be", "bf", "cd", "ce", "cf"].

54) **Word Search**
Given a 2D board and a word, find if the word exists in the grid.
The word can be constructed from letters of sequentially adjacent cell, where "adjacent" cells are those horizontally or vertically neighboring. The same letter cell may not be used more than once.
For example,
Given board =
[
  ['A','B','C','E'],
  ['S','F','C','S'],
  ['A','D','E','E']
]
word = "ABCCED", -> returns true,
word = "SEE", -> returns true,
word = "ABCB", -> returns false.

55)**Delete Node in a BST**
Given a root node reference of a BST and a key, delete the node with the given key in the BST. Return the root node reference (possibly updated) of the BST.
Basically, the deletion can be divided into two stages:
Search for a node to remove.
If the node is found, delete the node.
Note: Time complexity should be O(height of tree).

56) **Permutations**
Given a collection of distinct numbers, return all possible permutations.
For example,
[1,2,3] have the following permutations:
[
  [1,2,3],
  [1,3,2],
  [2,1,3],
  [2,3,1],
  [3,1,2],
  [3,2,1]
]
57)4Sum II
Given four lists A, B, C, D of integer values, compute how many tuples (i, j, k, l) there are such that A[i] + B[j] + C[k] + D[l] is zero.
To make problem a bit easier, all A, B, C, D have same length of N where 0 ≤ N ≤ 500. All integers are in the range of -228 to 228 - 1 and the result is guaranteed to be at most 231 - 1.
Example:
Input:
A = [ 1, 2]
B = [-2,-1]
C = [-1, 2]
D = [ 0, 2]
Output:
2
Explanation:
The two tuples are:
1. (0, 0, 0, 1) -> A[0] + B[0] + C[0] + D[1] = 1 + (-2) + (-1) + 2 = 0
2. (1, 1, 0, 0) -> A[1] + B[1] + C[0] + D[0] = 2 + (-1) + (-1) + 0 = 0

58)**Gas Station**
There are N gas stations along a circular route, where the amount of gas at station i is gas[i].
You have a car with an unlimited gas tank and it costs cost[i] of gas to travel from station i to its next station (i+1). You begin the journey with an empty tank at one of the gas stations.
Return the starting gas station's index if you can travel around the circuit once, otherwise return -1.

59)**Integer Replacement**
Given a positive integer n and you can do operations as follow:

If n is even, replace n with n/2.
If n is odd, you can replace n with either n + 1 or n - 1.
What is the minimum number of replacements needed for n to become 1?
Example 1:
Input:
8
Output:
3
Explanation:
8 -> 4 -> 2 -> 1

60)Linked List Cycle II
Given a linked list, return the node where the cycle begins. If there is no cycle, return null.
Note: Do not modify the linked list.

61)**Max Consecutive Ones II**
Given a binary array, find the maximum number of consecutive 1s in this array if you can flip at most one 0.
Example 1:
Input: [1,0,1,1,0]
Output: 4
Explanation: Flip the first zero will get the maximum number of consecutive 1s.
After flipping, the maximum number of consecutive 1s is 4.
Note:
The input array will only contain 0 and 1.
The length of input array is a positive integer and will not exceed 10,000


62)**Longest Increasing Subsequence**
Given an unsorted array of integers, find the length of longest increasing subsequence.
For example,
Given [10, 9, 2, 5, 3, 7, 101, 18],
The longest increasing subsequence is [2, 3, 7, 101], therefore the length is 4. Note that there may be more than one LIS combination, it is only necessary for you to return the length.
Your algorithm should run in O(n2) complexity.
Follow up: Could you improve it to O(n log n) time complexity?

63)Partition List
Given a linked list and a value x, partition it such that all nodes less than x come before nodes greater than or equal to x.
You should preserve the original relative order of the nodes in each of the two partitions.
For example,
Given 1->4->3->2->5->2 and x = 3,
return 1->2->2->4->3->5.

64) Random Pick Index
Given an array of integers with possible duplicates, randomly output the index of a given target number. You can assume that the given target number must exist in the array.
Note:
The array size can be very large. Solution that uses too much extra space will not pass the judge.
Example:
int[] nums = new int[] {1,2,3,3,3};
Solution solution = new Solution(nums);
// pick(3) should return either index 2, 3, or 4 randomly. Each index should have equal probability of returning.
solution.pick(3);
// pick(1) should return 0. Since in the array only nums[0] is equal to 1.
solution.pick(1);

65)Repeated DNA Sequences
All DNA is composed of a series of nucleotides abbreviated as A, C, G, and T, for example: "ACGAATTCCG". When studying DNA, it is sometimes useful to identify repeated sequences within the DNA.
Write a function to find all the 10-letter-long sequences (substrings) that occur more than once in a DNA molecule.
For example,
Given s = "AAAAACCCCCAAAAACCCCCCAAAAAGGGTTT",
Return:
["AAAAACCCCC", "CCCCCAAAAA"].

66)Sort Colors
Given an array with n objects colored red, white or blue, sort them so that objects of the same color are adjacent, with the colors in the order red, white and blue.
Here, we will use the integers 0, 1, and 2 to represent the color red, white, and blue respectively.
Note:
You are not suppose to use the library's sort function for this problem.

67)Reorder List
Given a singly linked list L: L0→L1→…→Ln-1→Ln,
reorder it to: L0→Ln→L1→Ln-1→L2→Ln-2→…
You must do this in-place without altering the nodes' values.
For example,
Given {1,2,3,4}, reorder it to {1,4,2,3}.

68)Path Sum III
You are given a binary tree in which each node contains an integer value.
Find the number of paths that sum to a given value.
The path does not need to start or end at the root or a leaf, but it must go downwards (traveling only from parent nodes to child nodes).
The tree has no more than 1,000 nodes and the values are in the range -1,000,000 to 1,000,000.
Example:
root = [10,5,-3,3,2,null,11,3,-2,null,1], sum = 8

      10
     /  \
    5   -3
   / \    \
  3   2   11
 / \   \
3  -2   1

Return 3. The paths that sum to 8 are:
1.  5 -> 3
2.  5 -> 2 -> 1
3. -3 -> 11

69)Unique Paths
A robot is located at the top-left corner of a m x n grid (marked 'Start' in the diagram below).
The robot can only move either down or right at any point in time. The robot is trying to reach the bottom-right corner of the grid (marked 'Finish' in the diagram below).
How many possible unique paths are there?

70)Unique Paths II
Follow up for "Unique Paths":
Now consider if some obstacles are added to the grids. How many unique paths would there be?
An obstacle and empty space is marked as 1 and 0 respectively in the grid.
For example,
There is one obstacle in the middle of a 3x3 grid as illustrated below.
[
  [0,0,0],
  [0,1,0],
  [0,0,0]
]
The total number of unique paths is 2.

71)Number of Islands
Given a 2d grid map of '1's (land) and '0's (water), count the number of islands. An island is surrounded by water and is formed by connecting adjacent lands horizontally or vertically. You may assume all four edges of the grid are all surrounded by water.

Example 1:

11110
11010
11000
00000
Answer: 1

Example 2:

11000
11000
00100
00011
Answer: 3

72) Increasing Subsequences
Given an integer array, your task is to find all the different possible increasing subsequences of the given array, and the length of an increasing subsequence should be at least 2 .
Example:
Input: [4, 6, 7, 7]
Output: [[4, 6], [4, 7], [4, 6, 7], [4, 6, 7, 7], [6, 7], [6, 7, 7], [7,7], [4,7,7]]
Note:
The length of the given array will not exceed 15.
The range of integer in the given array is [-100,100].
The given array may contain duplicates, and two equal integers should also be considered as a special case of increasing sequence.

73)Target Sum
You are given a list of non-negative integers, a1, a2, ..., an, and a target, S. Now you have 2 symbols + and -. For each integer, you should choose one from + and - as its new symbol.
Find out how many ways to assign symbols to make sum of integers equal to target S.
Example 1:
Input: nums is [1, 1, 1, 1, 1], S is 3.
Output: 5
Explanation:
-1+1+1+1+1 = 3
+1-1+1+1+1 = 3
+1+1-1+1+1 = 3
+1+1+1-1+1 = 3
+1+1+1+1-1 = 3
There are 5 ways to assign symbols to make the sum of nums be target 3.
Note:
The length of the given array is positive and will not exceed 20.
The sum of elements in the given array will not exceed 1000.
Your output answer is guaranteed to be fitted in a 32-bit integer.

74)Binary Tree Left Side View

75)Summary Ranges
Given a sorted integer array without duplicates, return the summary of its ranges.
For example, given [0,1,2,4,5,7], return ["0->2","4->5","7"].

76)Subsets II
Given a collection of integers that might contain duplicates, nums, return all possible subsets.
Note: The solution set must not contain duplicate subsets.
For example,
If nums = [1,2,2], a solution is:
[
  [2],
  [1],
  [1,2,2],
  [2,2],
  [1,2],
  []
]

77)Minimum Height Trees
For a undirected graph with tree characteristics, we can choose any node as the root. The result graph is then a rooted tree. Among all possible rooted trees, those with minimum height are called minimum height trees (MHTs). Given such a graph, write a function to find all the MHTs and return a list of their root labels.
Format
The graph contains n nodes which are labeled from 0 to n - 1. You will be given the number n and a list of undirected edges (each edge is a pair of labels).
You can assume that no duplicate edges will appear in edges. Since all edges are undirected, [0, 1] is the same as [1, 0] and thus will not appear together in edges.
Example 1:
Given n = 4, edges = [[1, 0], [1, 2], [1, 3]]
        0
        |
        1
       / \
      2   3
return [1]


78)Course Schedule
There are a total of n courses you have to take, labeled from 0 to n - 1.
Some courses may have prerequisites, for example to take course 0 you have to first take course 1, which is expressed as a pair: [0,1]
Given the total number of courses and a list of prerequisite pairs, is it possible for you to finish all courses?
For example:
2, [[1,0]]
There are a total of 2 courses to take. To take course 1 you should have finished course 0. So it is possible.
2, [[1,0],[0,1]]
There are a total of 2 courses to take. To take course 1 you should have finished course 0, and to take course 0 you should also have finished course 1. So it is impossible.
Note:
The input prerequisites is a graph represented by a list of edges, not adjacency matrices. Read more about how a graph is represented.

79)Course Schedule II
There are a total of n courses you have to take, labeled from 0 to n - 1.
Some courses may have prerequisites, for example to take course 0 you have to first take course 1, which is expressed as a pair: [0,1]
Given the total number of courses and a list of prerequisite pairs, return the ordering of courses you should take to finish all courses.
There may be multiple correct orders, you just need to return one of them. If it is impossible to finish all courses, return an empty array.
For example:
2, [[1,0]]
There are a total of 2 courses to take. To take course 1 you should have finished course 0. So the correct course order is [0,1]
4, [[1,0],[2,0],[3,1],[3,2]]
There are a total of 4 courses to take. To take course 3 you should have finished both courses 1 and 2. Both courses 1 and 2 should be taken after you finished course 0. So one correct course order is [0,1,2,3]. Another correct ordering is[0,2,1,3].
Note:
The input prerequisites is a graph represented by a list of edges, not adjacency matrices. Read more about how a graph is represented.

80)Set Matrix Zeroes
Given a m x n matrix, if an element is 0, set its entire row and column to 0. Do it in place.
    Follow up:
    Did you use extra space?
    A straight forward solution using O(mn) space is probably a bad idea.
    A simple improvement uses O(m + n) space, but still not the best solution.
    Could you devise a constant space solution?

81)Game of Life
According to the Wikipedia's article: "The Game of Life, also known simply as Life, is a cellular automaton devised by the British mathematician John Horton Conway in 1970."

Given a board with m by n cells, each cell has an initial state live (1) or dead (0). Each cell interacts with its eight neighbors (horizontal, vertical, diagonal) using the following four rules (taken from the above Wikipedia article):

Any live cell with fewer than two live neighbors dies, as if caused by under-population.
Any live cell with two or three live neighbors lives on to the next generation.
Any live cell with more than three live neighbors dies, as if by over-population..
Any dead cell with exactly three live neighbors becomes a live cell, as if by reproduction.
Write a function to compute the next state (after one update) of the board given its current state.

Follow up:
Could you solve it in-place? Remember that the board needs to be updated at the same time: You cannot update some cells first and then use their updated values to update other cells.
In this question, we represent the board using a 2D array. In principle, the board is infinite, which would cause problems when the active area encroaches the border of the array. How would you address these problems?

82)Merge Intervals
Given a collection of intervals, merge all overlapping intervals.
For example,
Given [1,3],[2,6],[8,10],[15,18],
return [1,6],[8,10],[15,18].

83)Find Mode in Binary Search Tree
Given a binary search tree (BST) with duplicates, find all the mode(s) (the most frequently occurred element) in the given BST.
Assume a BST is defined as follows:
The left subtree of a node contains only nodes with keys less than or equal to the node's key.
The right subtree of a node contains only nodes with keys greater than or equal to the node's key.
Both the left and right subtrees must also be binary search trees.


84)Teemo Attacking
In LLP world, there is a hero called Teemo and his attacking can make his enemy Ashe be in poisoned condition. Now, given the Teemo's attacking ascending time series towards Ashe and the poisoning time duration per Teemo's attacking, you need to output the total time that Ashe is in poisoned condition.
You may assume that Teemo attacks at the very beginning of a specific time point, and makes Ashe be in poisoned condition immediately.
Example 1:
Input: [1,4], 2
Output: 4
Explanation: At time point 1, Teemo starts attacking Ashe and makes Ashe be poisoned immediately.
This poisoned status will last 2 seconds until the end of time point 2.
And at time point 4, Teemo attacks Ashe again, and causes Ashe to be in poisoned status for another 2 seconds.
So you finally need to output 4.


85)Decode String
Given an encoded string, return it's decoded string.
The encoding rule is: k[encoded_string], where the encoded_string inside the square brackets is being repeated exactly k times. Note that k is guaranteed to be a positive integer.
You may assume that the input string is always valid; No extra white spaces, square brackets are well-formed, etc.
Furthermore, you may assume that the original data does not contain any digits and that digits are only for those repeat numbers, k. For example, there won't be input like 3a or 2[4].
Examples:
s = "3[a]2[bc]", return "aaabcbc".
s = "3[a2[c]]", return "accaccacc".
s = "2[abc]3[cd]ef", return "abcabccdcdcdef".

86)Find Right Interval
Given a set of intervals, for each of the interval i, check if there exists an interval j whose start point is bigger than or equal to the end point of the interval i, which can be called that j is on the "right" of i.
For any interval i, you need to store the minimum interval j's index, which means that the interval j has the minimum start point to build the "right" relationship for interval i. If the interval j doesn't exist, store -1 for the interval i. Finally, you need output the stored value of each interval as an array.
Note:
You may assume the interval's end point is always bigger than its start point.
You may assume none of these intervals have the same start point.
Example 1:
Input: [ [1,2] ]
Output: [-1]
Explanation: There is only one interval in the collection, so it outputs -1.
Example 2:
Input: [ [3,4], [2,3], [1,2] ]
Output: [-1, 0, 1]
Explanation: There is no satisfied "right" interval for [3,4].
For [2,3], the interval [3,4] has minimum-"right" start point;
For [1,2], the interval [2,3] has minimum-"right" start point.

87)Flatten Nested List Iterator
Given a nested list of integers, implement an iterator to flatten it.
Each element is either an integer, or a list -- whose elements may also be integers or other lists.
Example 1:
Given the list [[1,1],2,[1,1]],
By calling next repeatedly until hasNext returns false, the order of elements returned by next should be: [1,1,2,1,1].
Example 2:
Given the list [1,[4,[6]]],
By calling next repeatedly until hasNext returns false, the order of elements returned by next should be: [1,4,6].

88)Mini Parser
Given a nested list of integers represented as a string, implement a parser to deserialize it.
Each element is either an integer, or a list -- whose elements may also be integers or other lists.
Note: You may assume that the string is well-formed:
String is non-empty.
String does not contain white spaces.
String contains only digits 0-9, [, - ,, ].
Example 1:
Given s = "324",
You should return a NestedInteger object which contains a single integer 324.
Example 2:
Given s = "[123,[456,[789]]]",
Return a NestedInteger object containing a nested list with 2 elements:
1. An integer containing value 123.
2. A nested list containing two elements:
    i.  An integer containing value 456.
    ii. A nested list with one element:
         a. An integer containing value 789.

89)Add and Search Word - Data structure design
Design a data structure that supports the following two operations:

void addWord(word)
bool search(word)
search(word) can search a literal word or a regular expression string containing only letters a-z or .. A . means it can represent any one letter.
For example:
addWord("bad")
addWord("dad")
addWord("mad")
search("pad") -> false
search("bad") -> true
search(".ad") -> true
search("b..") -> true
Note:
You may assume that all words are consist of lowercase letters a-z.

90) Implement Trie (Prefix Tree)
Implement a trie with insert, search, and startsWith methods.
Note:
You may assume that all inputs are consist of lowercase letters a-z.

91)Rotate Image
You are given an n x n 2D matrix representing an image.

Rotate the image by 90 degrees (clockwise).

Follow up:
Could you do this in-place?

92)Search a 2D Matrix
Write an efficient algorithm that searches for a value in an m x n matrix. This matrix has the following properties:

Integers in each row are sorted from left to right.
The first integer of each row is greater than the last integer of the previous row.
For example,

Consider the following matrix:

[
  [1,   3,  5,  7],
  [10, 11, 16, 20],
  [23, 30, 34, 50]
]

93)Search a 2D Matrix II
Write an efficient algorithm that searches for a value in an m x n matrix. This matrix has the following properties:

Integers in each row are sorted in ascending from left to right.
Integers in each column are sorted in ascending from top to bottom.
For example,

Consider the following matrix:

[
  [1,   4,  7, 11, 15],
  [2,   5,  8, 12, 19],
  [3,   6,  9, 16, 22],
  [10, 13, 14, 17, 24],
  [18, 21, 23, 26, 30]
]
94)Evaluate Reverse Polish Notation
Evaluate the value of an arithmetic expression in Reverse Polish Notation.
Valid operators are +, -, *, /. Each operand may be an integer or another expression.
Some examples:
  ["2", "1", "+", "3", "*"] -> ((2 + 1) * 3) -> 9
  ["4", "13", "5", "/", "+"] -> (4 + (13 / 5)) -> 6

95)Valid Sudoku
Determine if a Sudoku is valid, according to: Sudoku Puzzles - The Rules.
A valid Sudoku board (partially filled) is not necessarily solvable. Only the filled cells need to be validated.

96)Spiral Matrix
Given a matrix of m x n elements (m rows, n columns), return all elements of the matrix in spiral order.
For example,
Given the following matrix:
[
 [ 1, 2, 3 ],
 [ 4, 5, 6 ],
 [ 7, 8, 9 ]
]
You should return [1,2,3,6,9,8,7,4,5].

97)Spiral Matrix II
Given an integer n, generate a square matrix filled with elements from 1 to n2 in spiral order.

For example,
Given n = 3,

You should return the following matrix:
[
 [ 1, 2, 3 ],
 [ 8, 9, 4 ],
 [ 7, 6, 5 ]
]
98) Search in Rotated Sorted Array
Suppose an array sorted in ascending order is rotated at some pivot unknown to you beforehand.
(i.e., 0 1 2 4 5 6 7 might become 4 5 6 7 0 1 2).
You are given a target value to search. If found in the array return its index, otherwise return -1.
You may assume no duplicate exists in the array.

99) Search in Rotated Sorted Array II
Follow up for "Search in Rotated Sorted Array":
What if duplicates are allowed?
Would this affect the run-time complexity? How and why?
Suppose an array sorted in ascending order is rotated at some pivot unknown to you beforehand.
(i.e., 0 1 2 4 5 6 7 might become 4 5 6 7 0 1 2).
Write a function to determine if a given target is in the array.
The array may contain duplicates.

100)Word Ladder
Given two words (beginWord and endWord), and a dictionary's word list, find the length of shortest transformation sequence from beginWord to endWord, such that:

Only one letter can be changed at a time.
Each transformed word must exist in the word list. Note that beginWord is not a transformed word.
For example,

Given:
beginWord = "hit"
endWord = "cog"
wordList = ["hot","dot","dog","lot","log","cog"]
As one shortest transformation is "hit" -> "hot" -> "dot" -> "dog" -> "cog",
return its length 5.

Note:
Return 0 if there is no such transformation sequence.
All words have the same length.
All words contain only lowercase alphabetic characters.
You may assume no duplicates in the word list.
You may assume beginWord and endWord are non-empty and are not the same.

101)Find Largest Element in Each Row
You need to find the largest value in each row of a binary tree.

Example:
Input:

          1
         / \
        3   2
       / \   \
      5   3   9

Output: [1, 3, 9]

102)Find Left Most Element
Given a binary tree, find the leftmost value in the last row of the tree.

Example 1:
Input:

    2
   / \
  1   3

Output:
1
Example 2:
Input:

        1
       / \
      2   3
     /   / \
    4   5   6
       /
      7

Output: 7

103)Jump Game
Given an array of non-negative integers, you are initially positioned at the first index of the array.
Each element in the array represents your maximum jump length at that position.
Determine if you are able to reach the last index.
For example:
A = [2,3,1,1,4], return true.
A = [3,2,1,0,4], return false.

104)Triangle
Given a triangle, find the minimum path sum from top to bottom. Each step you may move to adjacent numbers on the row below.

For example, given the following triangle
[
     [2],
    [3,4],
   [6,5,7],
  [4,1,8,3]
]
The minimum path sum from top to bottom is 11 (i.e., 2 + 3 + 5 + 1 = 11).
Bonus point if you are able to do this using only O(n) extra space, where n is the total number of rows in the triangle.


105)Continuous Subarray Sum
Given a list of non-negative numbers and a target integer k, write a function to check if the array has a continuous subarray of size at least 2 that sums up to the multiple of k, that is, sums up to n*k where n is also an integer.

Example 1:
Input: [23, 2, 4, 6, 7],  k=6
Output: True
Explanation: Because [2, 4] is a continuous subarray of size 2 and sums up to 6.
Example 2:
Input: [23, 2, 6, 4, 7],  k=6
Output: True
Explanation: Because [23, 2, 6, 4, 7] is an continuous subarray of size 5 and sums up to 42.

106) Longest Word in Dictionary through Deleting
Given a string and a string dictionary, find the longest string in the dictionary that can be formed by deleting some characters of the given string. If there are more than one possible results, return the longest word with the smallest lexicographical order. If there is no possible result, return the empty string.

Example 1:
Input:
s = "abpcplea", d = ["ale","apple","monkey","plea"]

Output:
"apple"
Example 2:
Input:
s = "abpcplea", d = ["a","b","c"]

Output:
"a"
106)Lowest Common Ancestor of Binary Tree
Given a binary tree, find the lowest common ancestor (LCA) of two given nodes in the tree.

According to the definition of LCA on Wikipedia: “The lowest common ancestor is defined between two nodes v and w as the lowest node in T that has both v and w as descendants (where we allow a node to be a descendant of itself).”

        _______3______
       /              \
    ___5__          ___1__
   /      \        /      \
   6      _2       0       8
         /  \
         7   4
For example, the lowest common ancestor (LCA) of nodes 5 and 1 is 3. Another example is LCA of nodes 5 and 4 is 5, since a node can be a descendant of itself according to the LCA definition

107)Compare Version Numbers
Compare two version numbers version1 and version2.
If version1 > version2 return 1, if version1 < version2 return -1, otherwise return 0.

You may assume that the version strings are non-empty and contain only digits and the . character.
The . character does not represent a decimal point and is used to separate number sequences.
For instance, 2.5 is not "two and a half" or "half way to version three", it is the fifth second-level revision of the second first-level revision.

Here is an example of version numbers ordering:

0.1 < 1.1 < 1.2 < 13.37

108)Word Break
Given a non-empty string s and a dictionary wordDict containing a list of non-empty words, determine if s can be segmented into a space-separated sequence of one or more dictionary words. You may assume the dictionary does not contain duplicate words.
For example, given
s = "leetcode",
dict = ["leet", "code"].
Return true because "leetcode" can be segmented as "leet code".


109)Lonely Pixel I
Given a picture consisting of black and white pixels, find the number of black lonely pixels.

The picture is represented by a 2D char array consisting of 'B' and 'W', which means black and white pixels respectively.

A black lonely pixel is character 'B' that located at a specific position where the same row and same column don't have any other black pixels.

Example:
Input:
[['W', 'W', 'B'],
 ['W', 'B', 'W'],
 ['B', 'W', 'W']]

Output: 3
Explanation: All the three 'B's are black lonely pixels.

110) Calculate Diameter of Binary tree.

111)Construct Binary Tree From String
You need to construct a binary tree from a string consisting of parenthesis and integers.

The whole input represents a binary tree. It contains an integer followed by zero, one or two pairs of parenthesis. The integer represents the root's value and a pair of parenthesis contains a child binary tree with the same structure.

You always start to construct the left child node of the parent first if it exists.

Example:
Input: "4(2(3)(1))(6(5))"
Output: return the tree root node representing the following tree:

       4
     /   \
    2     6
   / \   /
  3   1 5
Note:
There will only be '(', ')', '-' and '0' ~ '9' in the input string.
An empty tree is represented by "" instead of "()".

112)Convert BST to Greater Tree
Given a Binary Search Tree (BST), convert it to a Greater Tree such that every key of the original BST is changed to the original key plus sum of all keys greater than the original key in BST.

Example:

Input: The root of a Binary Search Tree like this:
              5
            /   \
           2     13

Output: The root of a Greater Tree like this:
             18
            /   \
          20     13
113)Non-overlapping Intervals
Given a collection of intervals, find the minimum number of intervals you need to remove to make the rest of the intervals non-overlapping.

Note:
You may assume the interval's end point is always bigger than its start point.
Intervals like [1,2] and [2,3] have borders "touching" but they don't overlap each other.
Example 1:
Input: [ [1,2], [2,3], [3,4], [1,3] ]

Output: 1

Explanation: [1,3] can be removed and the rest of intervals are non-overlapping.

114)Brick Wall
There is a brick wall in front of you. The wall is rectangular and has several rows of bricks. The bricks have the same height but different width. You want to draw a vertical line from the top to the bottom and cross the least bricks.

The brick wall is represented by a list of rows. Each row is a list of integers representing the width of each brick in this row from left to right.

If your line go through the edge of a brick, then the brick is not considered as crossed. You need to find out how to draw the line to cross the least bricks and return the number of crossed bricks.

You cannot draw a line just along one of the two vertical edges of the wall, in which case the line will obviously cross no bricks.

Example:
Input:
[[1,2,2,1],
 [3,1,2],
 [1,3,2],
 [2,4],
 [3,1,2],
 [1,3,1,1]]
Output: 2
Note:
The width sum of bricks in different rows are the same and won't exceed INT_MAX.
The number of bricks in each row is in range [1,10,000]. The height of wall is in range [1,10,000]. Total number of bricks of the wall won't exceed 20,000.

115)Next Greater Element III
Given a positive 32-bit integer n, you need to find the smallest 32-bit integer which has exactly the same digits existing in the integer n and is greater in value than n. If no such positive 32-bit integer exists, you need to return -1.
Example 1:
Input: 12
Output: 21
Example 2:
Input: 21
Output: -1

116)
Given a binary tree, find the largest subtree which is a Binary Search Tree (BST), where largest means subtree with largest number of nodes in it.

Note:
A subtree must include all of its descendants.
Here's an example:
    10
    / \
   5  15
  / \   \
 1   8   7
The Largest BST Subtree in this case is the highlighted one.
The return value is the subtree's size, which is 3.
Follow up:
Can you figure out ways to solve it with O(n) time complexity?

117)Shortest Word Distance II
This is a follow up of Shortest Word Distance. The only difference is now you are given the list of words and your method will be called repeatedly many times with different parameters. How would you optimize it?

Design a class which receives a list of words in the constructor, and implements a method that takes two words word1 and word2 and return the shortest distance between these two words in the list.

For example,
Assume that words = ["practice", "makes", "perfect", "coding", "makes"].

Given word1 = “coding”, word2 = “practice”, return 3.
Given word1 = "makes", word2 = "coding", return 1.

118)Shortest Word Distance 3
This is a follow up of Shortest Word Distance. The only difference is now word1 could be the same as word2.

Given a list of words and two words word1 and word2, return the shortest distance between these two words in the list.

word1 and word2 may be the same and they represent two individual words in the list.

For example,
Assume that words = ["practice", "makes", "perfect", "coding", "makes"].

Given word1 = “makes”, word2 = “coding”, return 1.
Given word1 = "makes", word2 = "makes", return 3.

Note:
You may assume word1 and word2 are both in the list.

119)Meta Strings
Given two strings, the task is to check whether these strings are meta strings or not. Meta strings are the strings which can be made equal by exactly one swap in any of the strings.
Equal string are not considered here as Meta strings.
Input : str1 = "geeks"
        str2 = "keegs"
Output : Yes
By just swapping 'k' and 'g' in any of string,
both will become same.

Input : str1 = "rsting"
        str2 = "string
Output : No

Input :  str1 = "Converse"
         str2 = "Conserve"
Output Yes

120)Longest Absolute File Path
Suppose we abstract our file system by a string in the following manner:

The string "dir\n\tsubdir1\n\tsubdir2\n\t\tfile.ext" represents:

dir
    subdir1
    subdir2
        file.ext
The directory dir contains an empty sub-directory subdir1 and a sub-directory subdir2 containing a file file.ext.

The string "dir\n\tsubdir1\n\t\tfile1.ext\n\t\tsubsubdir1\n\tsubdir2\n\t\tsubsubdir2\n\t\t\tfile2.ext" represents:

dir
    subdir1
        file1.ext
        subsubdir1
    subdir2
        subsubdir2
            file2.ext
The directory dir contains two sub-directories subdir1 and subdir2. subdir1 contains a file file1.ext and an empty second-level sub-directory subsubdir1. subdir2 contains a second-level sub-directory subsubdir2 containing a file file2.ext.

We are interested in finding the longest (number of characters) absolute path to a file within our file system. For example, in the second example above, the longest absolute path is "dir/subdir2/subsubdir2/file2.ext", and its length is 32 (not including the double quotes).

Given a string representing the file system in the above format, return the length of the longest absolute path to file in the abstracted file system. If there is no file in the system, return 0.

Note:
The name of a file contains at least a . and an extension.
The name of a directory or sub-directory will not contain a .

121)Palindrome Permutation II
Given a string s, return all the palindromic permutations (without duplicates) of it. Return an empty list if no palindromic permutation could be form.

For example:

Given s = "aabb", return ["abba", "baab"].

Given s = "abc", return [].

122)Next Permutation
Total Accepted: 104657
Total Submissions: 366915
Difficulty: Medium
Contributor: LeetCode
Implement next permutation, which rearranges numbers into the lexicographically next greater permutation of numbers.

If such arrangement is not possible, it must rearrange it as the lowest possible order (ie, sorted in ascending order).

The replacement must be in-place, do not allocate extra memory.

Here are some examples. Inputs are in the left-hand column and its corresponding outputs are in the right-hand column.
1,2,3 → 1,3,2
3,2,1 → 1,2,3
1,1,5 → 1,5,1

123)Permutations II
Given a collection of numbers that might contain duplicates, return all possible unique permutations.

For example,
[1,1,2] have the following unique permutations:
[
  [1,1,2],
  [1,2,1],
  [2,1,1]
]
Show Company Tags
Show Tags
Show Similar Problems

124)Stack of Piles
Imagine a (literal) stack of plates. If the stack gets too high, it might topple.
Therefore, in real life, we would likely start a new stack when the previous stack exceeds some
threshold. Implement a data structure SetOfStacks that mimics this. SetO-fStacks should be
composed of several stacks and should create a new stack once the previous one exceeds capacity.
SetOfStacks. push() and SetOfStacks. pop() should behave identically to a single stack
(that is, pop () should return the same values as it would if there were just a single stack).
FOLLOW UP
Implement a function popAt ( int index) which performs a pop operation on a specific sub-stack.

125)Sort Stack
Write a program to sort a stack such that the smallest items are on the top. You can use
an additional temporary stack, but you may not copy the elements into any other data structure
(such as an array). The stack supports the following operations: push, pop, peek, and is Empty.

126)BST Sequences
A binary search tree was created by traversing through an array from left to right
and inserting each element. Given a binary search tree with distinct elements, print all possible
arrays that could have led to this tree
For example:
2 1 3 tree
Output: [[2,1,3], [2,3,1]]

127)Generate Parenthesis
Implement an algorithm to print all valid (e.g., properly opened and closed) combinations
of n pairs of parentheses.
EXAMPLE
Input: 3
Output: ( ( () ) ) , ( () () ) , ( () ) () , () ( () ) , () () ()

128)Alien Alphabet
Given dictionary of alien language. You need to find order of alphabets based on dictionary

129)Flatten a Dictionary
A dictionary is a type of data structure that is supported natively in all major interpreted languages such as JavaScript, Python, Ruby and PHP, where it’s known as an Object, Dictionary, Hash and Array, respectively. In simple terms, a dictionary is a collection of unique keys and their values. The values can typically be of any primitive type (i.e an integer, boolean, double, string etc) or other dictionaries (dictionaries can be nested).

Given a dictionary dict, write a function flattenDictionary that returns a flattened version of it .

If you’re using a compiled language such Java, C++, C#, Swift and Go, you may want to use a Map/Dictionary/Hash Table that maps strings (keys) to a generic type (e.g. Object in Java, AnyObject in Swift etc.) to allow nested dictionaries.

129)Combination Sum III

Total Accepted: 64870
Total Submissions: 147680
Difficulty: Medium
Contributor: LeetCode
Find all possible combinations of k numbers that add up to a number n, given that only numbers from 1 to 9 can be used and each combination should be a unique set of numbers.
Example 1:
Input: k = 3, n = 7
Output:
[[1,2,4]]
Example 2:
Input: k = 3, n = 9
Output:
[[1,2,6], [1,3,5], [2,3,4]]

130)Array Nesting
A zero-indexed array A consisting of N different integers is given. The array contains all integers in the range [0, N - 1].

Sets S[K] for 0 <= K < N are defined as follows:

S[K] = { A[K], A[A[K]], A[A[A[K]]], ... }.

Sets S[K] are finite for each K and should NOT contain duplicates.

Write a function that given an array A consisting of N integers, return the size of the largest set S[K] for this array.

Example 1:
Input: A = [5,4,0,3,1,6,2]
Output: 4
Explanation:
A[0] = 5, A[1] = 4, A[2] = 0, A[3] = 3, A[4] = 1, A[5] = 6, A[6] = 2.

One of the longest S[K]:
S[0] = {A[0], A[5], A[6], A[2]} = {5, 6, 2, 0}

131)Minimum Index Sum of Two Lists
Suppose Andy and Doris want to choose a restaurant for dinner, and they both have a list of favorite restaurants represented by strings.

You need to help them find out their common interest with the least list index sum. If there is a choice tie between answers, output all of them with no order requirement. You could assume there always exists an answer.

Example 1:
Input:
["Shogun", "Tapioca Express", "Burger King", "KFC"]
["Piatti", "The Grill at Torrey Pines", "Hungry Hunter Steakhouse", "Shogun"]
Output: ["Shogun"]
Explanation: The only restaurant they both like is "Shogun".
Example 2:
Input:
["Shogun", "Tapioca Express", "Burger King", "KFC"]
["KFC", "Shogun", "Burger King"]
Output: ["Shogun"]
Explanation: The restaurant they both like and have the least index sum is "Shogun" with index sum 1 (0+1).
Note:
The length of both lists will be in the range of [1, 1000].
The length of strings in both lists will be in the range of [1, 30].
The index is starting from 0 to the list length minus 1.
No duplicates in both lists.

132) Combinations
Given two integers n and k, return all possible combinations of k numbers out of 1 ... n.

For example,
If n = 4 and k = 2, a solution is:

[
  [2,4],
  [3,4],
  [2,3],
  [1,2],
  [1,3],
  [1,4],
]
133)Find Duplicate File in System
Given a list of directory info including directory path, and all the files with contents in this directory, you need to find out all the groups of duplicate files in the file system in terms of their paths.

A group of duplicate files consists of at least two files that have exactly the same content.

A single directory info string in the input list has the following format:

"root/d1/d2/.../dm f1.txt(f1_content) f2.txt(f2_content) ... fn.txt(fn_content)"

It means there are n files (f1.txt, f2.txt ... fn.txt with content f1_content, f2_content ... fn_content, respectively) in directory root/d1/d2/.../dm. Note that n >= 1 and m >= 0. If m = 0, it means the directory is just the root directory.

The output is a list of group of duplicate file paths. For each group, it contains all the file paths of the files that have the same content. A file path is a string that has the following format:

"directory_path/file_name.txt"

Example 1:
Input:
["root/a 1.txt(abcd) 2.txt(efgh)", "root/c 3.txt(abcd)", "root/c/d 4.txt(efgh)", "root 4.txt(efgh)"]
Output:
[["root/a/2.txt","root/c/d/4.txt","root/4.txt"],["root/a/1.txt","root/c/3.txt"]]
Note:
No order is required for the final output.
You may assume the directory name, file name and file content only has letters and digits, and the length of file content is in the range of [1,50].
The number of files given is in the range of [1,20000].
You may assume no files or directories share the same name in a same directory.
You may assume each given directory info represents a unique directory. Directory path and file infos are separated by a single blank space.
Follow up beyond contest:
Imagine you are given a real file system, how will you search files? DFS or BFS ?
If the file content is very large (GB level), how will you modify your solution?
If you can only read the file by 1kb each time, how will you modify your solution?
What is the time complexity of your modified solution? What is the most time consuming part and memory consuming part of it? How to optimize?
How to make sure the duplicated files you find are not false positive?

134)Coin Change
You are given coins of different denominations and a total amount of money amount. Write a function to compute the fewest number of coins that you need to make up that amount. If that amount of money cannot be made up by any combination of the coins, return -1.

Example 1:
coins = [1, 2, 5], amount = 11
return 3 (11 = 5 + 5 + 1)

Example 2:
coins = [2], amount = 3
return -1.

Note:
You may assume that you have an infinite number of each kind of coin.

135)Maximum Binary Tree

Given an integer array with no duplicates. A maximum tree building on this array is defined as follow:

The root is the maximum number in the array.
The left subtree is the maximum tree constructed from left part subarray divided by the maximum number.
The right subtree is the maximum tree constructed from right part subarray divided by the maximum number.
Construct the maximum tree by the given array and output the root node of this tree.

Example 1:
Input: [3,2,1,6,0,5]
Output: return the tree root node representing the following tree:

      6
    /   \
   3     5
    \    / 
     2  0   
       \
        1
Note:
The size of the given array will be in the range [1,1000].

136) Maximum Width of Binary Tree
Given a binary tree, write a function to get the maximum width of the given tree. The width of a tree is the maximum width among all levels. The binary tree has the same structure as a full binary tree, but some nodes are null.

The width of one level is defined as the length between the end-nodes (the leftmost and right most non-null nodes in the level, where the null nodes between the end-nodes are also counted into the length calculation.

Example 1:
Input:

           1
         /   \
        3     2
       / \     \
      5   3     9

Output: 4
Explanation: The maximum width existing in the third level with the length 4 (5,3,null,9).
Example 2:
Input:

          1
         /
        3
       / \
      5   3

Output: 2
Explanation: The maximum width existing in the third level with the length 2 (5,3).
Example 3:
Input:

          1
         / \
        3   2
       /
      5

Output: 2
Explanation: The maximum width existing in the second level with the length 2 (3,2).
Example 4:
Input:

          1
         / \
        3   2
       /     \
      5       9
     /         \
    6           7
Output: 8
Explanation:The maximum width existing in the fourth level with the length 8 (6,null,null,null,null,null,null,7).


Note: Answer will in the range of 32-bit signed integer.

137) Equal Tree Partition
Given a binary tree with n nodes, your task is to check if it's possible to partition the tree to two trees which have the equal sum of values after removing exactly one edge on the original tree.

Example 1:
Input:
    5
   / \
  10 10
    /  \
   2   3

Output: True
Explanation:
    5
   /
  10

Sum: 15

   10
  /  \
 2    3

Sum: 15
Example 2:
Input:
    1
   / \
  2  10
    /  \
   2   20

Output: False
Explanation: You can't split the tree into two trees with equal sum after removing exactly one edge on the tree.
Note:
The range of tree node value is in the range of [-100000, 100000].
1 <= n <= 10000
Discuss

138) Single Number 2
Given an array of integers, every element appears three times except for one, which appears exactly once. Find that single one.

Note:
Your algorithm should have a linear runtime complexity. Could you implement it without using extra memory?

139)Encode and Decode TinyURL
TinyURL is a URL shortening service where you enter a URL such as https://leetcode.com/problems/design-tinyurl and it returns a short URL such as http://tinyurl.com/4e9iAk.

Design the encode and decode methods for the TinyURL service. There is no restriction on how your encode/decode algorithm should work. You just need to ensure that a URL can be encoded to a tiny URL and the tiny URL can be decoded to the original URL.

140) Palindromic Substrings
Given a string, your task is to count how many palindromic substrings in this string.

The substrings with different start indexes or end indexes are counted as different substrings even they consist of same characters.

Example 1:
Input: "abc"
Output: 3
Explanation: Three palindromic strings: "a", "b", "c".
Example 2:
Input: "aaa"
Output: 6
Explanation: Six palindromic strings: "a", "a", "a", "aa", "aa", "aaa".

140)Queue Reconstruction by Height
Suppose you have a random list of people standing in a queue. Each person is described by a pair of integers (h, k), where h is the height of the person and k is the number of people in front of this person who have a height greater than or equal to h. Write an algorithm to reconstruct the queue.

Note:
The number of people is less than 1,100.

Example

Input:
[[7,0], [4,4], [7,1], [5,0], [6,1], [5,2]]

Output:
[[5,0], [7,0], [5,2], [6,1], [4,4], [7,1]]

141) Beautiful Arrangement
Suppose you have N integers from 1 to N. We define a beautiful arrangement as an array that is constructed by these N numbers successfully if one of the following is true for the ith position (1 <= i <= N) in this array:

The number at the ith position is divisible by i.
i is divisible by the number at the ith position.
Now given N, how many beautiful arrangements can you construct?

Example 1:
Input: 2
Output: 2
Explanation:

The first beautiful arrangement is [1, 2]:

Number at the 1st position (i=1) is 1, and 1 is divisible by i (i=1).

Number at the 2nd position (i=2) is 2, and 2 is divisible by i (i=2).

The second beautiful arrangement is [2, 1]:

Number at the 1st position (i=1) is 2, and 2 is divisible by i (i=1).

Number at the 2nd position (i=2) is 1, and i (i=2) is divisible by 1.

142)Friend Circles
There are N students in a class. Some of them are friends, while some are not. Their friendship is transitive in nature. For example, if A is a direct friend of B, and B is a direct friend of C, then A is an indirect friend of C. And we defined a friend circle is a group of students who are direct or indirect friends.

Given a N*N matrix M representing the friend relationship between students in the class. If M[i][j] = 1, then the ith and jth students are direct friends with each other, otherwise not. And you have to output the total number of friend circles among all the students.

Example 1:
Input:
[[1,1,0],
 [1,1,0],
 [0,0,1]]
Output: 2
Explanation:The 0th and 1st students are direct friends, so they are in a friend circle.
The 2nd student himself is in a friend circle. So return 2.
Example 2:
Input:
[[1,1,0],
 [1,1,1],
 [0,1,1]]
Output: 1
Explanation:The 0th and 1st students are direct friends, the 1st and 2nd students are direct friends,
so the 0th and 2nd students are indirect friends. All of them are in the same friend circle, so return 1.
Note:
N is in range [1,200].
M[i][i] = 1 for all students.
If M[i][j] = 1, then M[j][i] = 1.

143) Replace Words
In English, we have a concept called root, which can be followed by some other words to form another longer word - let's call this word successor. For example, the root an, followed by other, which can form another word another.

Now, given a dictionary consisting of many roots and a sentence. You need to replace all the successor in the sentence with the root forming it. If a successor has many roots can form it, replace it with the root with the shortest length.

You need to output the sentence after the replacement.

Example 1:
Input: dict = ["cat", "bat", "rat"]
sentence = "the cattle was rattled by the battery"
Output: "the cat was rat by the bat"
Note:
The input will only have lower-case letters.
1 <= dict words number <= 1000
1 <= sentence words number <= 1000
1 <= root length <= 100
1 <= sentence words length <= 1000

144)Counting Bits
Given a non negative integer number num. For every numbers i in the range 0 ≤ i ≤ num calculate the number of 1's in their binary representation and return them as an array.

Example:
For num = 5 you should return [0,1,1,2,1,2].

Follow up:

It is very easy to come up with a solution with run time O(n*sizeof(integer)). But can you do it in linear time O(n) /possibly in a single pass?
Space complexity should be O(n).
Can you do it like a boss? Do it without using any builtin function like __builtin_popcount in c++ or in any other language.

145) Find K Closest Elements
Given a sorted array, two integers k and x, find the k closest elements to x in the array. The result should also be sorted in ascending order. If there is a tie, the smaller elements are always preferred.

Example 1:
Input: [1,2,3,4,5], k=4, x=3
Output: [1,2,3,4]
Example 2:
Input: [1,2,3,4,5], k=4, x=-1
Output: [1,2,3,4]
Note:
The value k is positive and will always be smaller than the length of the sorted array.
Length of the given array is positive and will not exceed 104
Absolute value of elements in the array and x will not exceed 104

146) Find Duplicate Subtrees
Given a binary tree, return all duplicate subtrees. For each kind of duplicate subtrees, you only need to return the root node of any one of them.

Two trees are duplicate if they have the same structure with same node values.

Example 1:
        1
       / \
      2   3
     /   / \
    4   2   4
       /
      4
The following are two duplicate subtrees:
      2
     /
    4
and
    4
Therefore, you need to return above trees' root in the form of a list.

147)Task Scheduler
Given a char array representing tasks CPU need to do. It contains capital letters A to Z where different letters represent different tasks.Tasks could be done without original order. Each task could be done in one interval. For each interval, CPU could finish one task or just be idle.

However, there is a non-negative cooling interval n that means between two same tasks, there must be at least n intervals that CPU are doing different tasks or just be idle.

You need to return the least number of intervals the CPU will take to finish all the given tasks.

Example 1:
Input: tasks = ['A','A','A','B','B','B'], n = 2
Output: 8
Explanation: A -> B -> idle -> A -> B -> idle -> A -> B.

148)Minimum Number of Arrows to Burst Balloons
There are a number of spherical balloons spread in two-dimensional space. For each balloon, provided input is the start and end coordinates of the horizontal diameter. Since it's horizontal, y-coordinates don't matter and hence the x-coordinates of start and end of the diameter suffice. Start is always smaller than end. There will be at most 104 balloons.

An arrow can be shot up exactly vertically from different points along the x-axis. A balloon with xstart and xend bursts by an arrow shot at x if xstart ≤ x ≤ xend. There is no limit to the number of arrows that can be shot. An arrow once shot keeps travelling up infinitely. The problem is to find the minimum number of arrows that must be shot to burst all balloons.

Example:

Input:
[[10,16], [2,8], [1,6], [7,12]]

Output:
2

Explanation:
One way is to shoot one arrow for example at x = 6 (bursting the balloons [2,8] and [1,6]) and another arrow at x = 11 (bursting the other two balloons).

148)Maximum Swap
Given a non-negative integer, you could swap two digits at most once to get the maximum valued number. Return the maximum valued number you could get.

Example 1:
Input: 2736
Output: 7236
Explanation: Swap the number 2 and the number 7.
Example 2:
Input: 9973
Output: 9973
Explanation: No swap.
Note:
The given number is in the range [0, 108]

149) Implement Magic Dictionary
Implement a magic directory with buildDict, and search methods.

For the method buildDict, you'll be given a list of non-repetitive words to build a dictionary.

For the method search, you'll be given a word, and judge whether if you modify exactly one character into another character in this word, the modified word is in the dictionary you just built.

Example 1:
Input: buildDict(["hello", "leetcode"]), Output: Null
Input: search("hello"), Output: False
Input: search("hhllo"), Output: True
Input: search("hell"), Output: False
Input: search("leetcoded"), Output: False
Note:
You may assume that all the inputs are consist of lowercase letters a-z.
For contest purpose, the test data is rather small by now. You could think about highly efficient algorithm after the contest.
Please remember to RESET your class variables declared in class MagicDictionary, as static/class variables are persisted across multiple test cases. Please see here for more details.

150)Map Sum Pairs
Implement a MapSum class with insert, and sum methods.

For the method insert, you'll be given a pair of (string, integer). The string represents the key and the integer represents the value. If the key already existed, then the original key-value pair will be overridden to the new one.

For the method sum, you'll be given a string representing the prefix, and you need to return the sum of all the pairs' value whose key starts with the prefix.

Example 1:
Input: insert("apple", 3), Output: Null
Input: sum("ap"), Output: 3
Input: insert("app", 2), Output: Null
Input: sum("ap"), Output: 5

151)2 Keys Keyboard
Initially on a notepad only one character 'A' is present. You can perform two operations on this notepad for each step:

Copy All: You can copy all the characters present on the notepad (partial copy is not allowed).
Paste: You can paste the characters which are copied last time.
Given a number n. You have to get exactly n 'A' on the notepad by performing the minimum number of steps permitted. Output the minimum number of steps to get n 'A'.

Example 1:
Input: 3
Output: 3
Explanation:
Intitally, we have one character 'A'.
In step 1, we use Copy All operation.
In step 2, we use Paste operation to get 'AA'.
In step 3, we use Paste operation to get 'AAA'.
Note:
The n will be in the range [1, 1000].


152)Next Closest Time
Given a time represented in the format "HH:MM", form the next closest time by reusing the current digits. There is no limit on how many times a digit can be reused.

You may assume the given input string is always valid. For example, "01:34", "12:09" are all valid. "1:34", "12:9" are all invalid.

Example 1:

Input: "19:34"
Output: "19:39"
Explanation: The next closest time choosing from digits 1, 9, 3, 4, is 19:39, which occurs 5 minutes later.  It is not 19:33, because this occurs 23 hours and 59 minutes later.
Example 2:

Input: "23:59"
Output: "22:22"
Explanation: The next closest time choosing from digits 2, 3, 5, 9, is 22:22. It may be assumed that the returned time is next day's time since it is smaller than the input time numerically.

153) Redundant Connection
In this problem, a tree is an undirected graph that is connected and has no cycles.

The given input is a graph that started as a tree with N nodes (with distinct values 1, 2, ..., N), with one additional edge added. The added edge has two different vertices chosen from 1 to N, and was not an edge that already existed.

The resulting graph is given as a 2D-array of edges. Each element of edges is a pair [u, v] with u < v, that represents an undirected edge connecting nodes u and v.

Return an edge that can be removed so that the resulting graph is a tree of N nodes. If there are multiple answers, return the answer that occurs last in the given 2D-array. The answer edge [u, v] should be in the same format, with u < v.

Example 1:
Input: [[1,2], [1,3], [2,3]]
Output: [2,3]
Explanation: The given undirected graph will be like this:
  1
 / \
2 - 3
Example 2:
Input: [[1,2], [2,3], [3,4], [1,4], [1,5]]
Output: [1,4]
Explanation: The given undirected graph will be like this:
5 - 1 - 2
    |   |
    4 - 3
Note:
The size of the input 2D-array will be between 3 and 1000.
Every integer represented in the 2D-array will be between 1 and N, where N is the size of the input array.

154)Longest Univalue Path
Given a binary tree, find the length of the longest path where each node in the path has the same value. This path may or may not pass through the root.

Note: The length of path between two nodes is represented by the number of edges between them.

Example 1:

Input:

              5
             / \
            4   5
           / \   \
          1   1   5
Output:

2
Example 2:

Input:

              1
             / \
            4   5
           / \   \
          4   4   5
Output:

2
Note: The given binary tree has not more than 10000 nodes. The height of the tree is not more than 1000.

155)Employee Importance
You are given a data structure of employee information, which includes the employee's unique id, his importance value and his direct subordinates' id.

For example, employee 1 is the leader of employee 2, and employee 2 is the leader of employee 3. They have importance value 15, 10 and 5, respectively. Then employee 1 has a data structure like [1, 15, [2]], and employee 2 has [2, 10, [3]], and employee 3 has [3, 5, []]. Note that although employee 3 is also a subordinate of employee 1, the relationship is not direct.

Now given the employee information of a company, and an employee id, you need to return the total importance value of this employee and all his subordinates.

Example 1:
Input: [[1, 5, [2, 3]], [2, 3, []], [3, 3, []]], 1
Output: 11
Explanation:
Employee 1 has importance value 5, and he has two direct subordinates: employee 2 and employee 3. They both have importance value 3. So the total importance value of employee 1 is 5 + 3 + 3 = 11.
Note:
One employee has at most one direct leader and may have several subordinates.
The maximum number of employees won't exceed 2000.

155)Top K Frequent Words
Given a non-empty list of words, return the k most frequent elements.

Your answer should be sorted by frequency from highest to lowest. If two words have the same frequency, then the word with the lower alphabetical order comes first.

Example 1:
Input: ["i", "love", "leetcode", "i", "love", "coding"], k = 2
Output: ["i", "love"]
Explanation: "i" and "love" are the two most frequent words.
    Note that "i" comes before "love" due to a lower alphabetical order.
Example 2:
Input: ["the", "day", "is", "sunny", "the", "the", "the", "sunny", "is", "is"], k = 4
Output: ["the", "is", "sunny", "day"]
Explanation: "the", "is", "sunny" and "day" are the four most frequent words,
    with the number of occurrence being 4, 3, 2 and 1 respectively.
Note:
You may assume k is always valid, 1 ≤ k ≤ number of unique elements.
Input words contain only lowercase letters.
Follow up:
Try to solve it in O(n log k) time and O(n) extra space.

156)Subarray Product Less Than K
Your are given an array of positive integers nums.

Count and print the number of (contiguous) subarrays where the product of all the elements in the subarray is less than k.

Example 1:
Input: nums = [10, 5, 2, 6], k = 100
Output: 8
Explanation: The 8 subarrays that have product less than 100 are: [10], [5], [2], [6], [10, 5], [5, 2], [2, 6], [5, 2, 6].
Note that [10, 5, 2] is not included as the product of 100 is not strictly less than k.
Note:

0 < nums.length <= 50000.
0 < nums[i] < 1000.
0 <= k < 10^6.
157)Maximum Length of Repeated Subarray
Given two integer arrays A and B, return the maximum length of an subarray that appears in both arrays.

Example 1:
Input:
A: [1,2,3,2,1]
B: [3,2,1,4,7]
Output: 3
Explanation:
The repeated subarray with maximum length is [3, 2, 1].
Note:
1 <= len(A), len(B) <= 1000
0 <= A[i], B[i] < 100

158)Remove Comments
Given a C++ program, remove comments from it. The program source is an array where source[i] is the i-th line of the source code. This represents the result of splitting the original source code string by the newline character \n.

In C++, there are two types of comments, line comments, and block comments.

The string // denotes a line comment, which represents that it and rest of the characters to the right of it in the same line should be ignored.

The string /* denotes a block comment, which represents that all characters until the next (non-overlapping) occurrence of */ should be ignored. (Here, occurrences happen in reading order: line by line from left to right.) To be clear, the string /*/ does not yet end the block comment, as the ending would be overlapping the beginning.

The first effective comment takes precedence over others: if the string // occurs in a block comment, it is ignored. Similarly, if the string /* occurs in a line or block comment, it is also ignored.

If a certain line of code is empty after removing comments, you must not output that line: each string in the answer list will be non-empty.

There will be no control characters, single quote, or double quote characters. For example, source = "string s = "/* Not a comment. */";" will not be a test case. (Also, nothing else such as defines or macros will interfere with the comments.)

It is guaranteed that every open block comment will eventually be closed, so /* outside of a line or block comment always starts a new comment.

Finally, implicit newline characters can be deleted by block comments. Please see the examples below for details.

After removing the comments from the source code, return the source code in the same format.

Example 1:
Input:
source = ["/*Test program */", "int main()", "{ ", "  // variable declaration ", "int a, b, c;", "/* This is a test", "   multiline  ", "   comment for ", "   testing */", "a = b + c;", "}"]

The line by line code is visualized as below:
/*Test program */
int main()
{
  // variable declaration
int a, b, c;
/* This is a test
   multiline
   comment for
   testing */
a = b + c;
}

Output: ["int main()","{ ","  ","int a, b, c;","a = b + c;","}"]

The line by line code is visualized as below:
int main()
{
int a, b, c;
a = b + c;
}

Explanation:
The string
/*
 denotes a block comment, including line 1 and lines 6-9. The string
//
 denotes line 4 as comments.
Example 2:
Input:
source = ["a/*comment", "line", "more_comment*/b"]
Output: ["ab"]
Explanation: The original source string is "a/*comment\nline\nmore_comment*/b", where we have bolded the newline characters.  After deletion, the implicit newline characters are deleted, leaving the string "ab", which when delimited by newline characters becomes ["ab"].
Note:

The length of source is in the range [1, 100].
The length of source[i] is in the range [0, 80].
Every open block comment is eventually closed.
There are no single-quote, double-quote, or control characters in the source code.

159)Split Linked List in Parts
Given a (singly) linked list with head node root, write a function to split the linked list into k consecutive linked list "parts".

The length of each part should be as equal as possible: no two parts should have a size differing by more than 1. This may lead to some parts being null.

The parts should be in order of occurrence in the input list, and parts occurring earlier should always have a size greater than or equal parts occurring later.

Return a List of ListNode's representing the linked list parts that are formed.

Examples 1->2->3->4, k = 5 // 5 equal parts [ [1], [2], [3], [4], null ]
Example 1:
Input:
root = [1, 2, 3], k = 5
Output: [[1],[2],[3],[],[]]
Explanation:
The input and each element of the output are ListNodes, not arrays.
For example, the input root has root.val = 1, root.next.val = 2, \root.next.next.val = 3, and root.next.next.next = null.
The first element output[0] has output[0].val = 1, output[0].next = null.
The last element output[4] is null, but it's string representation as a ListNode is [].
Example 2:
Input:
root = [1, 2, 3, 4, 5, 6, 7, 8, 9, 10], k = 3
Output: [[1, 2, 3, 4], [5, 6, 7], [8, 9, 10]]
Explanation:
The input has been split into consecutive parts with size difference at most 1, and earlier parts are a larger size than the later parts.
Note:

The length of root will be in the range [0, 1000].
Each value of a node in the input will be an integer in the range [0, 999].
k will be an integer in the range [1, 50].

160)Shopping Offers
In LeetCode Store, there are some kinds of items to sell. Each item has a price.

However, there are some special offers, and a special offer consists of one or more different kinds of items with a sale price.

You are given the each item's price, a set of special offers, and the number we need to buy for each item. The job is to output the lowest price you have to pay for exactly certain items as given, where you could make optimal use of the special offers.

Each special offer is represented in the form of an array, the last number represents the price you need to pay for this special offer, other numbers represents how many specific items you could get if you buy this offer.

You could use any of special offers as many times as you want.

Example 1:
Input: [2,5], [[3,0,5],[1,2,10]], [3,2]
Output: 14
Explanation:
There are two kinds of items, A and B. Their prices are $2 and $5 respectively.
In special offer 1, you can pay $5 for 3A and 0B
In special offer 2, you can pay $10 for 1A and 2B.
You need to buy 3A and 2B, so you may pay $10 for 1A and 2B (special offer #2), and $4 for 2A.
Example 2:
Input: [2,3,4], [[1,1,0,4],[2,2,1,9]], [1,2,1]
Output: 11
Explanation:
The price of A is $2, and $3 for B, $4 for C.
You may pay $4 for 1A and 1B, and $9 for 2A ,2B and 1C.
You need to buy 1A ,2B and 1C, so you may pay $4 for 1A and 1B (special offer #1), and $3 for 1B, $4 for 1C.
You cannot add more items, though only $9 for 2A ,2B and 1C.
Note:
There are at most 6 kinds of items, 100 special offers.
For each item, you need to buy at most 6 of them.
You are not allowed to buy more items than you want, even if that would lower the overall price.

161)My Calendar I
Implement a MyCalendar class to store your events. A new event can be added if adding the event will not cause a double booking.

Your class will have the method, book(int start, int end). Formally, this represents a booking on the half open interval [start, end), the range of real numbers x such that start <= x < end.

A double booking happens when two events have some non-empty intersection (ie., there is some time that is common to both events.)

For each call to the method MyCalendar.book, return true if the event can be added to the calendar successfully without causing a double booking. Otherwise, return false and do not add the event to the calendar.

Your class will be called like this: MyCalendar cal = new MyCalendar(); MyCalendar.book(start, end)
Example 1:
MyCalendar();
MyCalendar.book(10, 20); // returns true
MyCalendar.book(15, 25); // returns false
MyCalendar.book(20, 30); // returns true
Explanation:
The first event can be booked.  The second can't because time 15 is already booked by another event.
The third event can be booked, as the first event takes every time less than 20, but not including 20.
Note:

The number of calls to MyCalendar.book per test case will be at most 1000.
In calls to MyCalendar.book(start, end), start and end are integers in the range [0, 10^9].
162) Asteroid Collision
We are given an array asteroids of integers representing asteroids in a row.

For each asteroid, the absolute value represents its size, and the sign represents its direction (positive meaning right, negative meaning left). Each asteroid moves at the same speed.

Find out the state of the asteroids after all collisions. If two asteroids meet, the smaller one will explode. If both are the same size, both will explode. Two asteroids moving in the same direction will never meet.

Example 1:
Input:
asteroids = [5, 10, -5]
Output: [5, 10]
Explanation:
The 10 and -5 collide resulting in 10.  The 5 and 10 never collide.
Example 2:
Input:
asteroids = [8, -8]
Output: []
Explanation:
The 8 and -8 collide exploding each other.
Example 3:
Input:
asteroids = [10, 2, -5]
Output: [10]
Explanation:
The 2 and -5 collide resulting in -5.  The 10 and -5 collide resulting in 10.
Example 4:
Input:
asteroids = [-2, -1, 1, 2]
Output: [-2, -1, 1, 2]
Explanation:
The -2 and -1 are moving left, while the 1 and 2 are moving right.
Asteroids moving the same direction never meet, so no asteroids will meet each other.
Note:

The length of asteroids will be at most 10000.
Each asteroid will be a non-zero integer in the range [-1000, 1000]..

163)Monotone Increasing Digits
Given a non-negative integer N, find the largest number that is less than or equal to N with monotone increasing digits.

(Recall that an integer has monotone increasing digits if and only if each pair of adjacent digits x and y satisfy x <= y.)

Example 1:
Input: N = 10
Output: 9
Example 2:
Input: N = 1234
Output: 1234
Example 3:
Input: N = 332
Output: 299
Note: N is an integer in the range [0, 10^9].


164) Daily Temperature
Given a list of daily temperatures, produce a list that, for each day in the input, tells you how many days you would have to wait until a warmer temperature. If there is no future day for which this is possible, put 0 instead.

For example, given the list temperatures = [73, 74, 75, 71, 69, 72, 76, 73], your output should be [1, 1, 4, 2, 1, 1, 0, 0].

Note: The length of temperatures will be in the range [1, 30000]. Each temperature will be an integer in the range [30, 100].


165) 43. Multiply Strings

Given two non-negative integers num1 and num2 represented as strings, return the product of num1 and num2.

Note:

The length of both num1 and num2 is < 110.
Both num1 and num2 contains only digits 0-9.
Both num1 and num2 does not contain any leading zero.
You must not use any built-in BigInteger library or convert the inputs to integer directly.

166) Rabbits in Forest
In a forest, each rabbit has some color. Some subset of rabbits (possibly all of them) tell you how many other rabbits have the same color as them. Those answers are placed in an array.

Return the minimum number of rabbits that could be in the forest.

Examples:
Input: answers = [1, 1, 2]
Output: 5
Explanation:
The two rabbits that answered "1" could both be the same color, say red.
The rabbit than answered "2" can't be red or the answers would be inconsistent.
Say the rabbit that answered "2" was blue.
Then there should be 2 other blue rabbits in the forest that didn't answer into the array.
The smallest possible number of rabbits in the forest is therefore 5: 3 that answered plus 2 that didn't.

Input: answers = [10, 10, 10]
Output: 11

Input: answers = []
Output: 0
Note:

answers will have length at most 1000.
Each answers[i] will be an integer in the range [0, 999].

167) K-th Symbol in Grammar
On the first row, we write a 0. Now in every subsequent row, we look at the previous row and replace each occurrence of 0 with 01, and each occurrence of 1 with 10.

Given row N and index K, return the K-th indexed symbol in row N. (The values of K are 1-indexed.) (1 indexed).

Examples:
Input: N = 1, K = 1
Output: 0

Input: N = 2, K = 1
Output: 0

Input: N = 2, K = 2
Output: 1

Input: N = 4, K = 5
Output: 1

Explanation:
row 1: 0
row 2: 01
row 3: 0110
row 4: 01101001
Note:

N will be an integer in the range [1, 30].
K will be an integer in the range [1, 2^(N-1)].

168)Largest Plus Sign
In a 2D grid from (0, 0) to (N-1, N-1), every cell contains a 1, except those cells in the given list mines which are 0. What is the largest axis-aligned plus sign of 1s contained in the grid? Return the order of the plus sign. If there is none, return 0.

An "axis-aligned plus sign of 1s of order k" has some center grid[x][y] = 1 along with 4 arms of length k-1 going up, down, left, and right, and made of 1s. This is demonstrated in the diagrams below. Note that there could be 0s or 1s beyond the arms of the plus sign, only the relevant area of the plus sign is checked for 1s.

Examples of Axis-Aligned Plus Signs of Order k:

Order 1:
000
010
000

Order 2:
00000
00100
01110
00100
00000

Order 3:
0000000
0001000
0001000
0111110
0001000
0001000
0000000
Example 1:

Input: N = 5, mines = [[4, 2]]
Output: 2
Explanation:
11111
11111
11111
11111
11011
In the above grid, the largest plus sign can only be order 2.  One of them is marked in bold.
Example 2:

Input: N = 2, mines = []
Output: 1
Explanation:
There is no plus sign of order 2, but there is of order 1.
Example 3:

Input: N = 1, mines = [[0, 0]]
Output: 0
Explanation:
There is no plus sign, so return 0.
Note:

N will be an integer in the range [1, 500].
mines will have length at most 5000.
mines[i] will be length 2 and consist of integers in the range [0, N-1].

169) Partition Labels
A string S of lowercase letters is given. We want to partition this string into as many parts as possible so that each letter appears in at most one part, and return a list of integers representing the size of these parts.

Example 1:
Input: S = "ababcbacadefegdehijhklij"
Output: [9,7,8]
Explanation:
The partition is "ababcbaca", "defegde", "hijhklij".
This is a partition so that each letter appears in at most one part.
A partition like "ababcbacadefegde", "hijhklij" is incorrect, because it splits S into less parts.
Note:

S will have length in range [1, 500].
S will consist of lowercase letters ('a' to 'z') only.

170)
There are n cities connected by m flights. Each fight starts from city u and arrives at v with a price w.

Now given all the cities and fights, together with starting city src and the destination dst, your task is to find the cheapest price from src to dst with up to k stops. If there is no such route, output -1.

Example 1:
Input:
n = 3, edges = [[0,1,100],[1,2,100],[0,2,500]]
src = 0, dst = 2, k = 1
Output: 200
Explanation:
The graph looks like this:


The cheapest price from city 0 to city 2 with at most 1 stop costs 200, as marked red in the picture.
Example 2:
Input:
n = 3, edges = [[0,1,100],[1,2,100],[0,2,500]]
src = 0, dst = 2, k = 0
Output: 500
Explanation:
The graph looks like this:


The cheapest price from city 0 to city 2 with at most 0 stop costs 500, as marked blue in the picture.
Note:

The number of nodes n will be in range [1, 100], with nodes labeled from 0 to n - 1.
The size of flights will be in range [0, n * (n - 1) / 2].
The format of each flight will be (src, dst, price).
The price of each flight will be in the range [1, 10000].
k is in the range of [0, n - 1].
There will not be any duplicated flights or self cycles.

171)Max Chunks To Make Sorted
Given an array arr that is a permutation of [0, 1, ..., arr.length - 1], we split the array into some number of "chunks" (partitions), and individually sort each chunk.  After concatenating them, the result equals the sorted array.

What is the most number of chunks we could have made?

Example 1:

Input: arr = [4,3,2,1,0]
Output: 1
Explanation:
Splitting into two or more chunks will not return the required result.
For example, splitting into [4, 3], [2, 1, 0] will result in [3, 4, 0, 1, 2], which isn't sorted.
Example 2:

Input: arr = [1,0,2,3,4]
Output: 4
Explanation:
We can split into two chunks, such as [1, 0], [2, 3, 4].
However, splitting into [1, 0], [2], [3], [4] is the highest number of chunks possible.
Note:

arr will have length in range [1, 10].
arr[i] will be a permutation of [0, 1, ..., arr.length - 1].

172) Is Graph Bipartite?
Given a graph, return true if and only if it is bipartite.

Recall that a graph is bipartite if we can split it's set of nodes into two independent subsets A and B such that every edge in the graph has one node in A and another node in B.

The graph is given in the following form: graph[i] is a list of indexes j for which the edge between nodes i and j exists.  Each node is an integer between 0 and graph.length - 1.  There are no self edges or parallel edges: graph[i] does not contain i, and it doesn't contain any element twice.

Example 1:
Input: [[1,3], [0,2], [1,3], [0,2]]
Output: true
Explanation:
The graph looks like this:
0----1
|    |
|    |
3----2
We can divide the vertices into two groups: {0, 2} and {1, 3}.
Example 2:
Input: [[1,2,3], [0,2], [0,1,3], [0,2]]
Output: false
Explanation:
The graph looks like this:
0----1
| \  |
|  \ |
3----2
We cannot find a way to divide the set of nodes into two independent subsets.


Note:

graph will have length in range [1, 100].
graph[i] will contain integers in range [0, graph.length - 1].
graph[i] will not contain i or duplicate values.

173) Custom Sort String
S and T are strings composed of lowercase letters. In S, no letter occurs more than once.

S was sorted in some custom order previously. We want to permute the characters of T so that they match the order that S was sorted. More specifically, if x occurs before y in S, then x should occur before y in the returned string.

Return any permutation of T (as a string) that satisfies this property.

Example :
Input:
S = "cba"
T = "abcd"
Output: "cbad"
Explanation:
"a", "b", "c" appear in S, so the order of "a", "b", "c" should be "c", "b", and "a".
Since "d" does not appear in S, it can be at any position in T. "dcba", "cdba", "cbda" are also valid outputs.


Note:

S has length at most 26, and no character is repeated in S.
T has length at most 200.
S and T consist of lowercase letters only.

174) Number of Matching Subsequences
Given string S and a dictionary of words words, find the number of words[i] that is a subsequence of S.

Example :
Input:
S = "abcde"
words = ["a", "bb", "acd", "ace"]
Output: 3
Explanation: There are three words in words that are a subsequence of S: "a", "acd", "ace".
Note:

All words in words and S will only consists of lowercase letters.
The length of S will be in the range of [1, 50000].
The length of words will be in the range of [1, 5000].
The length of words[i] will be in the range of [1, 50].

175)Network Delay Time
There are N network nodes, labelled 1 to N.

Given times, a list of travel times as directed edges times[i] = (u, v, w), where u is the source node, v is the target node, and w is the time it takes for a signal to travel from source to target.

Now, we send a signal from a certain node K. How long will it take for all nodes to receive the signal? If it is impossible, return -1.

Note:
N will be in the range [1, 100].
K will be in the range [1, N].
The length of times will be in the range [1, 6000].
All edges times[i] = (u, v, w) will have 1 <= u, v <= N and 1 <= w <= 100.

176)All Paths From Source to Target
Given a directed, acyclic graph of N nodes.  Find all possible paths from node 0 to node N-1, and return them in any order.

The graph is given as follows:  the nodes are 0, 1, ..., graph.length - 1.  graph[i] is a list of all nodes j for which the edge (i, j) exists.

Example:
Input: [[1,2], [3], [3], []]
Output: [[0,1,3],[0,2,3]]
Explanation: The graph looks like this:
0--->1
|    |
v    v
2--->3
There are two paths: 0 -> 1 -> 3 and 0 -> 2 -> 3.
Note:

The number of nodes in the graph will be in the range [2, 15].
You can print different paths in any order, but you should keep the order of nodes inside one path.

177)Find Eventual Safe States

In a directed graph, we start at some node and every turn, walk along a directed edge of the graph.  If we reach a node that is terminal (that is, it has no outgoing directed edges), we stop.

Now, say our starting node is eventually safe if and only if we must eventually walk to a terminal node.  More specifically, there exists a natural number K so that for any choice of where to walk, we must have stopped at a terminal node in less than K steps.

Which nodes are eventually safe?  Return them as an array in sorted order.

The directed graph has N nodes with labels 0, 1, ..., N-1, where N is the length of graph.  The graph is given in the following form: graph[i] is a list of labels j such that (i, j) is a directed edge of the graph.

Example:
Input: graph = [[1,2],[2,3],[5],[0],[5],[],[]]
Output: [2,4,5,6]
Here is a diagram of the above graph.

178)Max Increase to Keep City Skyline
In a 2 dimensional array grid, each value grid[i][j] represents the height of a building located there. We are allowed to increase the height of any number of buildings, by any amount (the amounts can be different for different buildings). Height 0 is considered to be a building as well.

At the end, the "skyline" when viewed from all four directions of the grid, i.e. top, bottom, left, and right, must be the same as the skyline of the original grid. A city's skyline is the outer contour of the rectangles formed by all the buildings when viewed from a distance. See the following example.

What is the maximum total sum that the height of the buildings can be increased?

Example:
Input: grid = [[3,0,8,4],[2,4,5,7],[9,2,6,3],[0,3,1,0]]
Output: 35
Explanation:
The grid is:
[ [3, 0, 8, 4],
  [2, 4, 5, 7],
  [9, 2, 6, 3],
  [0, 3, 1, 0] ]

The skyline viewed from top or bottom is: [9, 4, 8, 7]
The skyline viewed from left or right is: [8, 7, 9, 3]

The grid after increasing the height of buildings without affecting skylines is:

gridNew = [ [8, 4, 8, 7],
            [7, 4, 7, 7],
            [9, 4, 8, 7],
            [3, 3, 3, 3] ]

Notes:

1 < grid.length = grid[0].length <= 50.
All heights grid[i][j] are in the range [0, 100].
All buildings in grid[i][j] occupy the entire grid cell: that is, they are a 1 x 1 x grid[i][j] rectangular prism.
179)Binary Tree Pruning
We are given the head node root of a binary tree, where additionally every node's value is either a 0 or a 1.

Return the same tree where every subtree (of the given tree) not containing a 1 has been removed.

(Recall that the subtree of a node X is X, plus every node that is a descendant of X.)

Example 1:
Input: [1,null,0,0,1]
Output: [1,null,0,null,1]

Explanation:
Only the red nodes satisfy the property "every subtree not containing a 1".
The diagram on the right represents the answer.

The binary tree will have at most 100 nodes.
The value of each node will only be 0 or 1.

180) Linked List Components
We are given head, the head node of a linked list containing unique integer values.

We are also given the list G, a subset of the values in the linked list.

Return the number of connected components in G, where two values are connected if they appear consecutively in the linked list.

Example 1:

Input:
head: 0->1->2->3
G = [0, 1, 3]
Output: 2
Explanation:
0 and 1 are connected, so [0, 1] and [3] are the two connected components.
Example 2:

Input:
head: 0->1->2->3->4
G = [0, 3, 1, 4]
Output: 2
Explanation:
0 and 1 are connected, 3 and 4 are connected, so [0, 1] and [3, 4] are the two connected components.
Note:

If N is the length of the linked list given by head, 1 <= N <= 10000.
The value of each node in the linked list will be in the range [0, N - 1].
1 <= G.length <= 10000.
G is a subset of all values in the linked list.

181) Short Encoding of Words
Given a list of words, we may encode it by writing a reference string S and a list of indexes A.

For example, if the list of words is ["time", "me", "bell"], we can write it as S = "time#bell#" and indexes = [0, 2, 5].

Then for each index, we will recover the word by reading from the reference string from that index until we reach a "#" character.

What is the length of the shortest reference string S possible that encodes the given words?

Example:

Input: words = ["time", "me", "bell"]
Output: 10
Explanation: S = "time#bell#" and indexes = [0, 2, 5].
Note:

1 <= words.length <= 2000.
1 <= words[i].length <= 7.
Each word has only lowercase letters.

182)Most Profit Assigning Work
We have jobs: difficulty[i] is the difficulty of the ith job, and profit[i] is the profit of the ith job.

Now we have some workers. worker[i] is the ability of the ith worker, which means that this worker can only complete a job with difficulty at most worker[i].

Every worker can be assigned at most one job, but one job can be completed multiple times.

For example, if 3 people attempt the same job that pays $1, then the total profit will be $3.  If a worker cannot complete any job, his profit is $0.

What is the most profit we can make?

Example 1:

Input: difficulty = [2,4,6,8,10], profit = [10,20,30,40,50], worker = [4,5,6,7]
Output: 100
Explanation: Workers are assigned jobs of difficulty [4,4,6,6] and they get profit of [20,20,30,30] seperately.
Notes:

1 <= difficulty.length = profit.length <= 10000
1 <= worker.length <= 10000
difficulty[i], profit[i], worker[i]  are in range [1, 10^5]

183) Consecutive Numbers Sum
Given a positive integer N, how many ways can we write it as a sum of consecutive positive integers?

Example 1:

Input: 5
Output: 2
Explanation: 5 = 5 = 2 + 3
Example 2:

Input: 9
Output: 3
Explanation: 9 = 9 = 4 + 5 = 2 + 3 + 4
Example 3:

Input: 15
Output: 4
Explanation: 15 = 15 = 8 + 7 = 4 + 5 + 6 = 1 + 2 + 3 + 4 + 5
Note: 1 <= N <= 10 ^ 9.

183)Combination Sum II
Given a collection of candidate numbers (candidates) and a target number (target), find all unique combinations in candidates where the candidate numbers sums to target.

Each number in candidates may only be used once in the combination.

Note:

All numbers (including target) will be positive integers.
The solution set must not contain duplicate combinations.
Example 1:

Input: candidates = [10,1,2,7,6,1,5], target = 8,
A solution set is:
[
  [1, 7],
  [1, 2, 5],
  [2, 6],
  [1, 1, 6]
]
Example 2:

Input: candidates = [2,5,2,1,2], target = 5,
A solution set is:
[
  [1,2,2],
  [5]
]
184) Find And Replace in String

To some string S, we will perform some replacement operations that replace groups of letters with new ones (not necessarily the same size).

Each replacement operation has 3 parameters: a starting index i, a source word x and a target word y.  The rule is that if x starts at position i in the original string S, then we will replace that occurrence of x with y.  If not, we do nothing.

For example, if we have S = "abcd" and we have some replacement operation i = 2, x = "cd", y = "ffff", then because "cd" starts at position 2 in the original string S, we will replace it with "ffff".

Using another example on S = "abcd", if we have both the replacement operation i = 0, x = "ab", y = "eee", as well as another replacement operation i = 2, x = "ec", y = "ffff", this second operation does nothing because in the original string S[2] = 'c', which doesn't match x[0] = 'e'.

All these operations occur simultaneously.  It's guaranteed that there won't be any overlap in replacement: for example, S = "abc", indexes = [0, 1], sources = ["ab","bc"] is not a valid test case.

Example 1:

Input: S = "abcd", indexes = [0,2], sources = ["a","cd"], targets = ["eee","ffff"]
Output: "eeebffff"
Explanation: "a" starts at index 0 in S, so it's replaced by "eee".
"cd" starts at index 2 in S, so it's replaced by "ffff".
Example 2:

Input: S = "abcd", indexes = [0,2], sources = ["ab","ec"], targets = ["eee","ffff"]
Output: "eeecd"
Explanation: "ab" starts at index 0 in S, so it's replaced by "eee".
"ec" doesn't starts at index 2 in the original S, so we do nothing.
Notes:

0 <= indexes.length = sources.length = targets.length <= 100
0 < indexes[i] < S.length <= 1000
All characters in given inputs are lowercase letters.

185)Keys and Rooms
There are N rooms and you start in room 0.  Each room has a distinct number in 0, 1, 2, ..., N-1, and each room may have some keys to access the next room.

Formally, each room i has a list of keys rooms[i], and each key rooms[i][j] is an integer in [0, 1, ..., N-1] where N = rooms.length.  A key rooms[i][j] = v opens the room with number v.

Initially, all the rooms start locked (except for room 0).

You can walk back and forth between rooms freely.

Return true if and only if you can enter every room.

Example 1:

Input: [[1],[2],[3],[]]
Output: true
Explanation:
We start in room 0, and pick up key 1.
We then go to room 1, and pick up key 2.
We then go to room 2, and pick up key 3.
We then go to room 3.  Since we were able to go to every room, we return true.
Example 2:

Input: [[1,3],[3,0,1],[2],[0]]
Output: false
Explanation: We can't enter the room with number 2.
Note:

1 <= rooms.length <= 1000
0 <= rooms[i].length <= 1000
The number of keys in all rooms combined is at most 3000.

186)Longest Palindromic Substring
Given a string s, find the longest palindromic substring in s. You may assume that the maximum length of s is 1000.

Example 1:

Input: "babad"
Output: "bab"
Note: "aba" is also a valid answer.
Example 2:

Input: "cbbd"
Output: "bb"

187)Container With Most Water
Given n non-negative integers a1, a2, ..., an, where each represents a point at coordinate (i, ai). n vertical lines are drawn such that the two endpoints of line i is at (i, ai) and (i, 0). Find two lines, which together with x-axis forms a container, such that the container contains the most water.

Note: You may not slant the container and n is at least 2.

188)Longest Mountain in Array
Let's call any (contiguous) subarray B (of A) a mountain if the following properties hold:

B.length >= 3
There exists some 0 < i < B.length - 1 such that B[0] < B[1] < ... B[i-1] < B[i] > B[i+1] > ... > B[B.length - 1]
(Note that B could be any subarray of A, including the entire array A.)

Given an array A of integers, return the length of the longest mountain.

Return 0 if there is no mountain.

Example 1:

Input: [2,1,4,7,3,2,5]
Output: 5
Explanation: The largest mountain is [1,4,7,3,2] which has length 5.
Example 2:

Input: [2,2,2]
Output: 0
Explanation: There is no mountain.
Note:

0 <= A.length <= 10000
0 <= A[i] <= 10000
Follow up:

Can you solve it using only one pass?
Can you solve it in O(1) space?

189)Hand of Straights
Alice has a hand of cards, given as an array of integers.

Now she wants to rearrange the cards into groups so that each group is size W, and consists of W consecutive cards.

Return true if and only if she can.



Example 1:

Input: hand = [1,2,3,6,2,3,4,7,8], W = 3
Output: true
Explanation: Alice's hand can be rearranged as [1,2,3],[2,3,4],[6,7,8].
Example 2:

Input: hand = [1,2,3,4,5], W = 4
Output: false
Explanation: Alice's hand can't be rearranged into groups of 4.
 Note:

 1 <= hand.length <= 10000
 0 <= hand[i] <= 10^9
 1 <= W <= hand.length
190)Shifting Letters
 We have a string S of lowercase letters, and an integer array shifts.

 Call the shift of a letter, the next letter in the alphabet, (wrapping around so that 'z' becomes 'a').

 For example, shift('a') = 'b', shift('t') = 'u', and shift('z') = 'a'.

 Now for each shifts[i] = x, we want to shift the first i+1 letters of S, x times.

 Return the final string after all such shifts to S are applied.

 Example 1:

 Input: S = "abc", shifts = [3,5,9]
 Output: "rpl"
 Explanation:
 We start with "abc".
 After shifting the first 1 letters of S by 3, we have "dbc".
 After shifting the first 2 letters of S by 5, we have "igc".
 After shifting the first 3 letters of S by 9, we have "rpl", the answer.
 Note:

 1 <= S.length = shifts.length <= 20000
 0 <= shifts[i] <= 10 ^ 9
191)Car Fleet
N cars are going to the same destination along a one lane road.  The destination is target miles away.

Each car i has a constant speed speed[i] (in miles per hour), and initial position position[i] miles towards the target along the road.

A car can never pass another car ahead of it, but it can catch up to it, and drive bumper to bumper at the same speed.

The distance between these two cars is ignored - they are assumed to have the same position.

A car fleet is some non-empty set of cars driving at the same position and same speed.  Note that a single car is also a car fleet.

If a car catches up to a car fleet right at the destination point, it will still be considered as one car fleet.


How many car fleets will arrive at the destination?

Example 1:

Input: target = 12, position = [10,8,0,5,3], speed = [2,4,1,1,3]
Output: 3
Explanation:
The cars starting at 10 and 8 become a fleet, meeting each other at 12.
The car starting at 0 doesn't catch up to any other car, so it is a fleet by itself.
The cars starting at 5 and 3 become a fleet, meeting each other at 6.
Note that no other cars meet these fleets before the destination, so the answer is 3.

Note:

0 <= N <= 10 ^ 4
0 < target <= 10 ^ 6
0 < speed[i] <= 10 ^ 6
0 <= position[i] < target
All initial positions are different.

192)All Nodes Distance K in Binary Tree
We are given a binary tree (with root node root), a target node, and an integer value K.

Return a list of the values of all nodes that have a distance K from the target node.  The answer can be returned in any order.



Example 1:

Input: root = [3,5,1,6,2,0,8,null,null,7,4], target = 5, K = 2

Output: [7,4,1]

Explanation:
The nodes that are a distance 2 from the target node (with value 5)
have values 7, 4, and 1.



Note that the inputs "root" and "target" are actually TreeNodes.
The descriptions of the inputs above are just serializations of these objects.


Note:

The given tree is non-empty.
Each node in the tree has unique values 0 <= node.val <= 500.
The target node is a node in the tree.
0 <= K <= 1000.

193)Smallest Subtree with all the Deepest Nodes
Given a binary tree rooted at root, the depth of each node is the shortest distance to the root.

A node is deepest if it has the largest depth possible among any node in the entire tree.

The subtree of a node is that node, plus the set of all descendants of that node.

Return the node with the largest depth such that it contains all the deepest nodes in its subtree.



Example 1:

Input: [3,5,1,6,2,0,8,null,null,7,4]
Output: [2,7,4]
Explanation:



We return the node with value 2, colored in yellow in the diagram.
The nodes colored in blue are the deepest nodes of the tree.
The input "[3, 5, 1, 6, 2, 0, 8, null, null, 7, 4]" is a serialization of the given tree.
The output "[2, 7, 4]" is a serialization of the subtree rooted at the node with value 2.
Both the input and output have TreeNode type.


Note:

The number of nodes in the tree will be between 1 and 500.
The values of each node are unique.
194)Reordered Power of 2
Starting with a positive integer N, we reorder the digits in any order (including the original order) such that the leading digit is not zero.

Return true if and only if we can do this in a way such that the resulting number is a power of 2.

Example 1:

Input: 1
Output: true
Example 2:

Input: 10
Output: false
Example 3:

Input: 16
Output: true
Example 4:

Input: 24
Output: false
Example 5:

Input: 46
Output: true


Note:

1 <= N <= 10^9
195) Insert Into Binary Search Tree
Given the root node of a binary search tree (BST) and a value to be inserted into the tree, insert the value into the BST. Return the root node of the BST after the insertion. It is guaranteed that the new value does not exist in the original BST.

Note that there may exist multiple valid ways for the insertion, as long as the tree remains a BST after insertion. You can return any of them.

For example,

Given the tree:
        4
       / \
      2   7
     / \
    1   3
And the value to insert: 5
You can return this binary search tree:

         4
       /   \
      2     7
     / \   /
    1   3 5
This tree is also valid:

         5
       /   \
      2     7
     / \
    1   3
         \
          4
196)Possible Bipartition
Given a set of N people (numbered 1, 2, ..., N), we would like to split everyone into two groups of any size.

Each person may dislike some other people, and they should not go into the same group.

Formally, if dislikes[i] = [a, b], it means it is not allowed to put the people numbered a and b into the same group.

Return true if and only if it is possible to split everyone into two groups in this way.



Example 1:

Input: N = 4, dislikes = [[1,2],[1,3],[2,4]]
Output: true
Explanation: group1 [1,4], group2 [2,3]
Example 2:

Input: N = 3, dislikes = [[1,2],[1,3],[2,3]]
Output: false
Example 3:

Input: N = 5, dislikes = [[1,2],[2,3],[3,4],[4,5],[1,5]]
Output: false

Note:

1 <= N <= 2000
0 <= dislikes.length <= 10000
1 <= dislikes[i][j] <= N
dislikes[i][0] < dislikes[i][1]
There does not exist i != j for which dislikes[i] == dislikes[j].

197)Advantage Shuffle
Given two arrays A and B of equal size, the advantage of A with respect to B is the number of indices i for which A[i] > B[i].

Return any permutation of A that maximizes its advantage with respect to B.



Example 1:

Input: A = [2,7,11,15], B = [1,10,4,11]
Output: [2,11,7,15]
Example 2:

Input: A = [12,24,8,32], B = [13,25,32,11]
Output: [24,32,8,12]


Note:

1 <= A.length = B.length <= 10000
0 <= A[i] <= 10^9
0 <= B[i] <= 10^9

198)Boats to Save People
The i-th person has weight people[i], and each boat can carry a maximum weight of limit.

Each boat carries at most 2 people at the same time, provided the sum of the weight of those people is at most limit.

Return the minimum number of boats to carry every given person.  (It is guaranteed each person can be carried by a boat.)



Example 1:

Input: people = [1,2], limit = 3
Output: 1
Explanation: 1 boat (1, 2)
Example 2:

Input: people = [3,2,2,1], limit = 3
Output: 3
Explanation: 3 boats (1, 2), (2) and (3)
Example 3:

Input: people = [3,5,3,4], limit = 5
Output: 4
Explanation: 4 boats (3), (3), (4), (5)
Note:

1 <= people.length <= 50000
1 <= people[i] <= limit <= 30000

199) Find and Replace Pattern
You have a list of words and a pattern, and you want to know which words in words matches the pattern.

A word matches the pattern if there exists a permutation of letters p so that after replacing every letter x in the pattern with p(x), we get the desired word.

(Recall that a permutation of letters is a bijection from letters to letters: every letter maps to another letter, and no two letters map to the same letter.)

Return a list of the words in words that match the given pattern.

You may return the answer in any order.



Example 1:

Input: words = ["abc","deq","mee","aqq","dkd","ccc"], pattern = "abb"
Output: ["mee","aqq"]
Explanation: "mee" matches the pattern because there is a permutation {a -> m, b -> e, ...}.
"ccc" does not match the pattern because {a -> c, b -> c, ...} is not a permutation,
since a and b map to the same letter.


Note:

1 <= words.length <= 50
1 <= pattern.length = words[i].length <= 20


200)  House Robber 2

A robber is planning to rob houses along a street. Each house has a certain amount of money stashed. All houses at
this place are arranged in a circle. That means the first house is the neighbor of the last one. Meanwhile, adjacent houses have
security system connected and it will automatically contact the police if two adjacent houses were broken into on the same night.

You are given a list of non-negative integers representing the amount of money of each house, we need to determine the maximum amount of
money the robber can rob tonight without alerting the police.

Eg: Suppose you are given an array of money of houses like   [2,3,2] , max amount of money robber can rob is 3, as he cannot rob
house 1 (money = 2) and then rob house 3 (money = 2),  because they are adjacent houses.

201) Egg Dropping Puzzle
The following is a description of the instance of this famous puzzle involving n=2 eggs and a building with k=36 floors.

Suppose that we wish to know which stories in a 36-story building are safe to drop eggs from, and which will cause the eggs to
break on landing. We make a few assumptions:

…..An egg that survives a fall can be used again.
…..A broken egg must be discarded.
…..The effect of a fall is the same for all eggs.
…..If an egg breaks when dropped, then it would break if dropped from a higher floor.
…..If an egg survives a fall then it would survive a shorter fall.
…..It is not ruled out that the first-floor windows break eggs, nor is it ruled out that the 36th-floor do not cause an egg to break.

If only one egg is available and we wish to be sure of obtaining the right result, the experiment can be carried out in only one way.
 Drop the egg from the first-floor window; if it survives, drop it from the second floor window. Continue upward until it breaks.
  In the worst case, this method may require 36 droppings. Suppose 2 eggs are available. What is the least number of egg-droppings
   that is guaranteed to work in all cases?
The problem is not actually to find the critical floor, but merely to decide floors from which eggs should be dropped so that total
 number of trials are minimized.

 Here, we need to design a solution to a general problem with n eggs and k floors.

 Eg: For 10 floors and 2 eggs, minimum number of trials in worst case with 2 eggs and 10 floors is 4,
     as we can first drop egg from 4th floor, if it doesn't break, then from 7th and then from 9th and eventually 10.

202)Online election
In an election, the i-th vote was cast for persons[i] at time times[i].

Now, we would like to implement the following query function: TopVotedCandidate.q(int t) will return the number of the person that was leading the election at time t.

Votes cast at time t will count towards our query.  In the case of a tie, the most recent vote (among tied candidates) wins.



Example 1:

Input: ["TopVotedCandidate","q","q","q","q","q","q"], [[[0,1,1,0,0,1,0],[0,5,10,15,20,25,30]],[3],[12],[25],[15],[24],[8]]
Output: [null,0,1,1,0,0,1]
Explanation:
At time 3, the votes are [0], and 0 is leading.
At time 12, the votes are [0,1,1], and 1 is leading.
At time 25, the votes are [0,1,1,0,0,1], and 1 is leading (as ties go to the most recent vote.)
This continues for 3 more queries at time 15, 24, and 8.


Note:

1 <= persons.length = times.length <= 5000
0 <= persons[i] <= persons.length
times is a strictly increasing array with all elements in [0, 10^9].
TopVotedCandidate.q is called at most 10000 times per test case.
TopVotedCandidate.q(int t) is always called with t >= times[0].

203)Complete Binary Tree Inserter
A complete binary tree is a binary tree in which every level, except possibly the last, is completely filled, and all nodes are as far left as possible.

Write a data structure CBTInserter that is initialized with a complete binary tree and supports the following operations:

CBTInserter(TreeNode root) initializes the data structure on a given tree with head node root;
CBTInserter.insert(int v) will insert a TreeNode into the tree with value node.val = v so that the tree remains complete, and returns the value of the parent of the inserted TreeNode;
CBTInserter.get_root() will return the head node of the tree.


Example 1:

Input: inputs = ["CBTInserter","insert","get_root"], inputs = [[[1]],[2],[]]
Output: [null,1,[1,2]]
Example 2:

Input: inputs = ["CBTInserter","insert","insert","get_root"], inputs = [[[1,2,3,4,5,6]],[7],[8],[]]
Output: [null,3,4,[1,2,3,4,5,6,7,8]]


Note:

The initial given tree is complete and contains between 1 and 1000 nodes.
CBTInserter.insert is called at most 10000 times per test case.
Every value of a given or inserted node is between 0 and 5000.

204)Word Subsets
We are given two arrays A and B of words.  Each word is a string of lowercase letters.

Now, say that word b is a subset of word a if every letter in b occurs in a, including multiplicity.  For example, "wrr" is a subset of "warrior", but is not a subset of "world".

Now say a word a from A is universal if for every b in B, b is a subset of a.

Return a list of all universal words in A.  You can return the words in any order.



Example 1:

Input: A = ["amazon","apple","facebook","google","leetcode"], B = ["e","o"]
Output: ["facebook","google","leetcode"]
Example 2:

Input: A = ["amazon","apple","facebook","google","leetcode"], B = ["l","e"]
Output: ["apple","google","leetcode"]
Example 3:

Input: A = ["amazon","apple","facebook","google","leetcode"], B = ["e","oo"]
Output: ["facebook","google"]
Example 4:

Input: A = ["amazon","apple","facebook","google","leetcode"], B = ["lo","eo"]
Output: ["google","leetcode"]
Example 5:

Input: A = ["amazon","apple","facebook","google","leetcode"], B = ["ec","oc","ceo"]
Output: ["facebook","leetcode"]


Note:

1 <= A.length, B.length <= 10000
1 <= A[i].length, B[i].length <= 10
A[i] and B[i] consist only of lowercase letters.
All words in A[i] are unique: there isn't i != j with A[i] == A[j].