Home

Thermostat is 2-channel temperature controller

Overview

Channel count: 2
Sensor: 10k NTC thermistor read by AD7172-2 ADC
Load (heater/TEC) drive: up to 8W (+-2A with 4V compliance) from MAX1968 driver
Form factor: 3U module or stand-alone AL enclosure (Hammond 1455C1202).
Output connectors: Sensor and load connect via either terminal block connector on the stand-alone enclosure version via internal 100mil pin-header on 3U version (can be broken out to a separate front panel with 2xD9, such as Schroff 30849-750).
Programming interface: Ethernet via RJ45 connector on the front panel
Indicators 4 front panel LEDs
Power supply: +12V DC (1.5A max) supplied either by a front-panel barrel connector, internal 100mils pin-header, PoE (up to 30W), or rear Molex connector (3U version only).
*Microprocessor: STM332F427ZI