Official Skyminer Wiring

skywire logo

This guide assumes you are following the safety precautions outlined in the assembly manual. These safety precautions are listed in this guide as well for convenience.

Official Skyminer - Wiring

The following is a list of pictures that showcase the wiring of the official Skyminer. Each section entails the related pages of the assembly manual and can be used to verify your progress in the assembly.

Please contact the team if you are unsure about certain steps.
The safety precautions of the assembly manual must be followed at all times! You can find these safety precautions in the Safety Precautions sections of this page as well.

There are two versions available of the assembly manual:

Please refer to the following two articles for the software & network configuration:

In case you need a video to showcase the respective assembly check please click here.

You can contact the team by:

Safety Precautions

It’s important that you assemble and operate this product and all components in strict accordance with the instructions in this manual.

Handling circuit boards

Exercise extreme caution while handling printed circuit boards (PCBs) to avoid mechanical or electrical damage. Only handle the PCBs by the edges, to mini-mize the risk of electrostatic discharge damage.

Proper voltage

Before connecting the power cord, ensure that you switch to the correct input range on the power supply unit that corresponds to the voltage that your electrical outlet provides.

Firm connections

Before powering up the Skywire Miner, ensure that all connections are secure for all components, and confirm that there are no loose screws or loose components anywhere within the Skywire Miner unit. Do not connect any devices to the Skywire Miner that are not included in this package.

Precautions

Take time to consider situations that may be dangerous or cause damage:

During operation, do not expose Skywire Miner to water or moisture.
Do not expose Skywire Miner to heat from any source. This appliance is designed for reliable operation at normal ambient room temperatures.
Do not tug in the middle of the power supply cable to unplug the unit. Unplug the Skywire Miner from the end of the cable, where the plug inserts into the socket.
Place Skywire Miner where the power cord has adequate slack to safely connect the Skywire Miner to the power supply socket.
Place the power cord in such a way that people cannot step on it. Do not place anything over the power cord.