The Refinery rules
file is a YAML file.
Below is a simple example of a rules
file.
For a complete example, visit the Refinery GitHub repository.
RulesVersion: 2
Samplers:
__default__:
DeterministicSampler:
SampleRate: 1
production:
DynamicSampler:
SampleRate: 2
ClearFrequency: 30s
FieldList:
- request.method
- http.target
- response.status_code
where:
RulesVersion
is a required parameter used to verify the version of the rules file.
It must be set to 2
.
Samplers
maps targets to sampler configurations. Each target is a Honeycomb environment (or a dataset for Honeycomb Classic keys).
The value is the sampler to use for that target.
A __default__
target is required.
The target called __default__
will be used for any target that is not explicitly listed.
The targets are determined by examining the API key used to send the trace. If the API key is a Honeycomb Classic key with a 32-character hexadecimal value, then the specified dataset name is used as the target. If the API key is a key with 20-23 alphanumeric characters, then the key's environment name is used as the target.
The remainder of this page describes the samplers that can be used within the Samplers
section and the fields that control their behavior.
The Deterministic Sampler (DeterministicSampler
) uses a fixed sample rate to sample traces based on their trace ID.
This is the simplest sampling algorithm - it is a static sample rate, choosing traces randomly to either keep or send (at the appropriate rate).
It is not influenced by the contents of the trace other than the trace ID.
The sample rate to use.
It indicates a ratio, where one sample trace is kept for every N traces seen.
For example, a SampleRate
of 30
will keep 1 out of every 30 traces.
The choice on whether to keep any specific trace is random, so the rate is approximate.
The sample rate is calculated from the trace ID, so all spans with the same trace ID will be sampled or not sampled together.
- Type:
int
The Dynamic Sampler (DynamicSampler
) is the basic Dynamic Sampler implementation.
Most installations will find the EMA Dynamic Sampler to be a better choice.
This sampler collects the values of a number of fields from a trace and uses them to form a key.
This key is handed to the standard dynamic sampler algorithm, which generates a sample rate based on the frequency with which that key has appeared during the previous ClearFrequency
.
See https://github.com/honeycombio/dynsampler-go for more detail on the mechanics of the Dynamic Sampler.
This sampler uses the AvgSampleRate
algorithm from that package.
The sample rate to use.
It indicates a ratio, where one sample trace is kept for every N traces seen.
For example, a SampleRate
of 30
will keep 1 out of every 30 traces.
The choice on whether to keep any specific trace is random, so the rate is approximate.
The sample rate is calculated from the trace ID, so all spans with the same trace ID will be sampled or not sampled together.
- Type:
int
The duration after which the Dynamic Sampler should reset its internal counters. It should be specified as a duration string. For example, "30s" or "1m". Defaults to "30s".
- Type:
duration
A list of all the field names to use to form the key that will be handed to the Dynamic Sampler.
The combination of values from all of these fields should reflect how interesting the trace is compared to another.
When choosing field names for FieldList
, a good field selection has consistent values for high-frequency, boring traffic, and unique values for outliers and interesting traffic.
Including an error field, or something like HTTP status code
, is an excellent choice.
Using fields with very high cardinality, like k8s.pod.id
, is a bad choice.
If the combination of fields essentially makes each trace unique, then the Dynamic Sampler will sample everything.
If the combination of fields is not unique enough, then you will not be guaranteed samples of the most interesting traces.
As an example, consider as a good set of fields: the combination of HTTP endpoint
(high-frequency and boring), HTTP method
, and status code
(normally boring but can become interesting when indicating an error) since it will allowing proper sampling of all endpoints under normal traffic and call out when there is failing traffic to any endpoint.
In contrast, for example, consider as a bad set of fields: a combination of HTTP endpoint
, status code
, and pod id
, since it would result in keys that are all unique, and therefore result in sampling 100% of traces.
For example, rather than a set of fields, using only the HTTP endpoint
field is a bad choice, as it is not unique enough, and therefore interesting traces, like traces that experienced a 500
, might not be sampled.
Field names may come from any span in the trace; if they occur on multiple spans, then all unique values will be included in the key.
- Type:
stringarray
Limits the number of distinct keys tracked by the sampler.
Once MaxKeys
is reached, new keys will not be included in the sample rate map, but existing keys will continue to be be counted.
Use this field to keep the sample rate map size under control.
Defaults to 500
; Dynamic Samplers will rarely achieve their sampling goals with more keys than this.
- Type:
int
Indicates whether to include the trace length (number of spans in the trace) as part of the key.
The number of spans is exact, so if there are normally small variations in trace length, we recommend setting this field to false
.
If your traces are consistent lengths and changes in trace length is a useful indicator to view in Honeycomb, then set this field to true
.
- Type:
bool
The Exponential Moving Average (EMA) Dynamic Sampler (EMADynamicSampler
) attempts to average a given sample rate, weighting rare traffic and frequent traffic differently so as to end up with the correct average.
EMADynamicSampler
is an improvement upon the simple DynamicSampler
and is recommended for many use cases.
Based on the DynamicSampler
, EMADynamicSampler
differs in that rather than compute rate based on a periodic sample of traffic, it maintains an Exponential Moving Average of counts seen per key, and adjusts this average at regular intervals.
The weight applied to more recent intervals is defined by weight
, a number between (0, 1).
Larger values weight the average more toward recent observations.
In other words, a larger weight will cause sample rates more quickly adapt to traffic patterns, while a smaller weight will result in sample rates that are less sensitive to bursts or drops in traffic and thus more consistent over time.
Keys that are not already present in the EMA will always have a sample rate of 1
.
Keys that occur more frequently will be sampled on a logarithmic curve.
Every key will be represented at least once in any given window and more frequent keys will have their sample rate increased proportionally to trend towards the goal sample rate.
The sample rate to use.
It indicates a ratio, where one sample trace is kept for every N traces seen.
For example, a SampleRate
of 30
will keep 1 out of every 30 traces.
The choice on whether to keep any specific trace is random, so the rate is approximate.
The sample rate is calculated from the trace ID, so all spans with the same trace ID will be sampled or not sampled together.
- Type:
int
The duration after which the EMA Dynamic Sampler should recalculate its internal counters. It should be specified as a duration string. For example, "30s" or "1m". Defaults to "15s".
- Type:
duration
The weight to use when calculating the EMA.
It should be a number between 0
and 1
.
Larger values weight the average more toward recent observations.
In other words, a larger weight will cause sample rates more quickly adapt to traffic patterns, while a smaller weight will result in sample rates that are less sensitive to bursts or drops in traffic and thus more consistent over time.
- Type:
float
Indicates the threshold for removing keys from the EMA.
The EMA of any key will approach 0
if it is not repeatedly observed, but will never truly reach it, so this field determines what constitutes "zero".
Keys with averages below this threshold will be removed from the EMA.
Default is the same as Weight
, as this prevents a key with the smallest integer value (1) from being aged out immediately.
This value should generally be less than (<=) Weight
, unless you have very specific reasons to set it higher.
- Type:
float
If set, then this value is multiplied by the sum of the running average of counts to dynamically define the burst detection threshold.
If total counts observed for a given interval exceed this threshold, then EMA is updated immediately, rather than waiting on the AdjustmentInterval
.
Defaults to 2
; a negative value disables.
With the default of 2
, if your traffic suddenly doubles, then burst detection will kick in.
- Type:
float
Indicates the number of intervals to run before burst detection kicks in.
Defaults to 3
.
- Type:
int
A list of all the field names to use to form the key that will be handed to the Dynamic Sampler.
The combination of values from all of these fields should reflect how interesting the trace is compared to another.
When choosing field names for FieldList
, a good field selection has consistent values for high-frequency, boring traffic, and unique values for outliers and interesting traffic.
Including an error field, or something like HTTP status code
, is an excellent choice.
Using fields with very high cardinality, like k8s.pod.id
, is a bad choice.
If the combination of fields essentially makes each trace unique, then the Dynamic Sampler will sample everything.
If the combination of fields is not unique enough, then you will not be guaranteed samples of the most interesting traces.
As an example, consider as a good set of fields: the combination of HTTP endpoint
(high-frequency and boring), HTTP method
, and status code
(normally boring but can become interesting when indicating an error) since it will allowing proper sampling of all endpoints under normal traffic and call out when there is failing traffic to any endpoint.
In contrast, for example, consider as a bad set of fields: a combination of HTTP endpoint
, status code
, and pod id
, since it would result in keys that are all unique, and therefore result in sampling 100% of traces.
For example, rather than a set of fields, using only the HTTP endpoint
field is a bad choice, as it is not unique enough, and therefore interesting traces, like traces that experienced a 500
, might not be sampled.
Field names may come from any span in the trace; if they occur on multiple spans, then all unique values will be included in the key.
- Type:
stringarray
Limits the number of distinct keys tracked by the sampler.
Once MaxKeys
is reached, new keys will not be included in the sample rate map, but existing keys will continue to be be counted.
Use this field to keep the sample rate map size under control.
Defaults to 500
; Dynamic Samplers will rarely achieve their sampling goals with more keys than this.
- Type:
int
Indicates whether to include the trace length (number of spans in the trace) as part of the key.
The number of spans is exact, so if there are normally small variations in trace length, we recommend setting this field to false
.
If your traces are consistent lengths and changes in trace length is a useful indicator to view in Honeycomb, then set this field to true
.
- Type:
bool
The Exponential Moving Average (EMA) Throughput Sampler (EMAThroughputSampler
) attempts to achieve a given throughput -- number of spans per second -- weighting rare traffic and frequent traffic differently so as to end up with the correct rate.
The EMAThroughputSampler
is an improvement upon the Total Throughput Sampler and is recommended for most throughput-based use cases.
Because it like the EMADynamicSampler
, EMAThroughputSampler
maintains an Exponential Moving Average of counts seen per key, and adjusts this average at regular intervals.
The weight applied to more recent intervals is defined by weight
, a number between (0, 1) - larger values weight the average more toward recent observations.
In other words, a larger weight will cause sample rates more quickly adapt to traffic patterns, while a smaller weight will result in sample rates that are less sensitive to bursts or drops in traffic and thus more consistent over time.
New keys that are not already present in the EMA will always have a sample rate of 1
.
Keys that occur more frequently will be sampled on a logarithmic curve.
Every key will be represented at least once in any given window and more frequent keys will have their sample rate increased proportionally to trend towards the goal throughput.
The desired throughput per second. This is the number of events per second you want to send to Honeycomb. The sampler will adjust sample rates to try to achieve this desired throughput. This value is calculated for the individual instance, not for the cluster; if your cluster has multiple instances, then you will need to divide your total desired sample rate by the number of instances to get this value.
- Type:
int
Indicates whether to use the cluster size to calculate the goal throughput.
If true
, then the goal throughput will be divided by the number of instances in the cluster.
If false
, then the goal throughput will be the value specified in GoalThroughputPerSec
.
- Type:
bool
InitialSampleRate
is the sample rate to use during startup, before the sampler has accumulated enough data to calculate a reasonable throughput.
This is mainly useful in situations where unsampled throughput is high enough to cause problems.
- Type:
int
The duration after which the EMA Dynamic Sampler should recalculate its internal counters. It should be specified as a duration string. For example, "30s" or "1m". Defaults to "15s".
- Type:
duration
The weight to use when calculating the EMA.
It should be a number between 0
and 1
.
Larger values weight the average more toward recent observations.
In other words, a larger weight will cause sample rates more quickly adapt to traffic patterns, while a smaller weight will result in sample rates that are less sensitive to bursts or drops in traffic and thus more consistent over time.
- Type:
float
Indicates the threshold for removing keys from the EMA.
The EMA of any key will approach 0
if it is not repeatedly observed, but will never truly reach it, so this field determines what constitutes "zero".
Keys with averages below this threshold will be removed from the EMA.
Default is the same as Weight
, as this prevents a key with the smallest integer value (1) from being aged out immediately.
This value should generally be less than (<=) Weight
, unless you have very specific reasons to set it higher.
- Type:
float
If set, then this value is multiplied by the sum of the running average of counts to dynamically define the burst detection threshold.
If total counts observed for a given interval exceed this threshold, then EMA is updated immediately, rather than waiting on the AdjustmentInterval
.
Defaults to 2
; a negative value disables.
With the default of 2
, if your traffic suddenly doubles, then burst detection will kick in.
- Type:
float
Indicates the number of intervals to run before burst detection kicks in.
Defaults to 3
.
- Type:
int
A list of all the field names to use to form the key that will be handed to the Dynamic Sampler.
The combination of values from all of these fields should reflect how interesting the trace is compared to another.
When choosing field names for FieldList
, a good field selection has consistent values for high-frequency, boring traffic, and unique values for outliers and interesting traffic.
Including an error field, or something like HTTP status code
, is an excellent choice.
Using fields with very high cardinality, like k8s.pod.id
, is a bad choice.
If the combination of fields essentially makes each trace unique, then the Dynamic Sampler will sample everything.
If the combination of fields is not unique enough, then you will not be guaranteed samples of the most interesting traces.
As an example, consider as a good set of fields: the combination of HTTP endpoint
(high-frequency and boring), HTTP method
, and status code
(normally boring but can become interesting when indicating an error) since it will allowing proper sampling of all endpoints under normal traffic and call out when there is failing traffic to any endpoint.
In contrast, for example, consider as a bad set of fields: a combination of HTTP endpoint
, status code
, and pod id
, since it would result in keys that are all unique, and therefore result in sampling 100% of traces.
For example, rather than a set of fields, using only the HTTP endpoint
field is a bad choice, as it is not unique enough, and therefore interesting traces, like traces that experienced a 500
, might not be sampled.
Field names may come from any span in the trace; if they occur on multiple spans, then all unique values will be included in the key.
- Type:
stringarray
Limits the number of distinct keys tracked by the sampler.
Once MaxKeys
is reached, new keys will not be included in the sample rate map, but existing keys will continue to be be counted.
Use this field to keep the sample rate map size under control.
Defaults to 500
; Dynamic Samplers will rarely achieve their sampling goals with more keys than this.
- Type:
int
Indicates whether to include the trace length (number of spans in the trace) as part of the key.
The number of spans is exact, so if there are normally small variations in trace length, we recommend setting this field to false
.
If your traces are consistent lengths and changes in trace length is a useful indicator to view in Honeycomb, then set this field to true
.
- Type:
bool
Windowed Throughput Sampler (WindowedThroughputSampler
) is an enhanced version of total throughput sampling.
Just like the TotalThroughput
Sampler, WindowedThroughputSampler
attempts to meet the goal of fixed number of events per second sent to Honeycomb.
The original throughput sampler updates the sampling rate every "ClearFrequency" seconds.
While this parameter is configurable, it suffers from the following tradeoff:
- Decreasing it is more responsive to load spikes, but with the cost of making the sampling decision on less data.
- Increasing it is less responsive to load spikes, but sample rates
will be more stable because they are made with more data.
The Windowed Throughput Sampler resolves this by introducing two different, tunable parameters:
UpdateFrequency
: how often the sampling rate is recomputedLookbackFrequency
: how much total time is considered when recomputing sampling rate. A standard configuration would be to setUpdateFrequency
to1s
andLookbackFrequency
to30s
. In this configuration, for every second, we lookback at the last 30 seconds of data in order to compute the new sampling rate. The actual sampling rate computation is nearly identical to the original Throughput Sampler, but this variant has better support for floating point numbers.
The desired throughput per second. This is the number of events per second you want to send to Honeycomb. The sampler will adjust sample rates to try to achieve this desired throughput. This value is calculated for the individual instance, not for the cluster; if your cluster has multiple instances, then you will need to divide your total desired sample rate by the number of instances to get this value.
- Type:
int
Indicates whether to use the cluster size to calculate the goal throughput.
If true
, then the goal throughput will be divided by the number of instances in the cluster.
If false
, then the goal throughput will be the value specified in GoalThroughputPerSec
.
- Type:
bool
The duration between sampling rate computations. It should be specified as a duration string. For example, "30s" or "1m". Defaults to "1s".
- Type:
duration
This controls how far back in time to lookback to dynamically adjust the sampling rate.
Default is 30 * UpdateFrequencyDuration
.
This field is forced to be an integer multiple of UpdateFrequencyDuration
.
- Type:
duration
A list of all the field names to use to form the key that will be handed to the Dynamic Sampler.
The combination of values from all of these fields should reflect how interesting the trace is compared to another.
When choosing field names for FieldList
, a good field selection has consistent values for high-frequency, boring traffic, and unique values for outliers and interesting traffic.
Including an error field, or something like HTTP status code
, is an excellent choice.
Using fields with very high cardinality, like k8s.pod.id
, is a bad choice.
If the combination of fields essentially makes each trace unique, then the Dynamic Sampler will sample everything.
If the combination of fields is not unique enough, then you will not be guaranteed samples of the most interesting traces.
As an example, consider as a good set of fields: the combination of HTTP endpoint
(high-frequency and boring), HTTP method
, and status code
(normally boring but can become interesting when indicating an error) since it will allowing proper sampling of all endpoints under normal traffic and call out when there is failing traffic to any endpoint.
In contrast, for example, consider as a bad set of fields: a combination of HTTP endpoint
, status code
, and pod id
, since it would result in keys that are all unique, and therefore result in sampling 100% of traces.
For example, rather than a set of fields, using only the HTTP endpoint
field is a bad choice, as it is not unique enough, and therefore interesting traces, like traces that experienced a 500
, might not be sampled.
Field names may come from any span in the trace; if they occur on multiple spans, then all unique values will be included in the key.
- Type:
stringarray
Limits the number of distinct keys tracked by the sampler.
Once MaxKeys
is reached, new keys will not be included in the sample rate map, but existing keys will continue to be be counted.
Use this field to keep the sample rate map size under control.
Defaults to 500
; Dynamic Samplers will rarely achieve their sampling goals with more keys than this.
- Type:
int
Indicates whether to include the trace length (number of spans in the trace) as part of the key.
The number of spans is exact, so if there are normally small variations in trace length, we recommend setting this field to false
.
If your traces are consistent lengths and changes in trace length is a useful indicator to view in Honeycomb, then set this field to true
.
- Type:
bool
The Rules-based sampler allows you to specify a set of rules that will determine whether a trace should be sampled or not.
Rules are evaluated in order, and the first rule that matches will be used to determine the sample rate.
If no rules match, then the SampleRate
defaults to 1
and all traces will be kept.
Rules-based samplers will usually be configured to have the last rule be a default rule with no conditions that uses a downstream Dynamic Sampler to keep overall sample rate under control.
Rules
is a list of rules to use to determine the sample rate.
- Type:
objectarray
Indicates whether to expand nested JSON when evaluating rules.
If false, nested JSON will be treated as a string.
If true
, nested JSON will be expanded into a map[string]interface{}
and the value of the field will be the value of the nested field.
For example, if you have a field called http.request.headers
and you want to check the value of the User-Agent
header, then you would set this to true
and use http.request.headers.User-Agent
as the field name in your rule.
This is a computationally expensive option and may cause performance problems if you have a large number of spans with nested JSON.
- Type:
bool
Rules are evaluated in order, and the first rule that matches will be used to determine the sample rate.
If no rules match, then the SampleRate
will be 1
and all traces will be kept.
If a rule matches, one of three things happens, and they are evaluated in this order: a) if the rule specifies a downstream Sampler, that sampler is used to determine the sample rate; b) if the rule has the Drop
flag set to true
, the trace is dropped; c) the rule's sample rate is used.
The name of the rule.
This field is used for debugging and will appear in the trace metadata if AddRuleReasonToTrace
is set to true
.
- Type:
string
The sampler to use if the rule matches.
If this is set, the sample rate will be determined by this downstream sampler.
If this is not set, the sample rate will be determined by the Drop
flag or the SampleRate
field.
- Type:
object
Indicates whether to drop the trace if it matches this rule.
If true
, then the trace will be dropped.
If false
, then the trace will be kept.
- Type:
bool
If the rule is matched, there is no Sampler specified, and the Drop
flag is false
, then this is the sample rate to use.
- Type:
int
Conditions is a list of conditions to use to determine whether the rule matches. All conditions must be met for the rule to match. If there are no conditions, then the rule will always match. A no-condition rule is typically used for the last rule to provide a default behavior.
- Type:
objectarray
Controls the scope of the rule evaluation. If set to "trace" (the default), then each condition can apply to any span in the trace independently. If set to "span", then all of the conditions in the rule will be evaluated against each span in the trace and the rule only succeeds if all of the conditions match on a single span together.
- Type:
string
Conditions are evaluated in order, and the first condition that does not match will cause the rule to not match. If all conditions match, then the rule will match. If there are no conditions, then the rule will always match.
The field to check.
This can name any field in the trace.
If the field is not present, then the condition will not match.
The comparison is case-sensitive.
The field can also include a prefix that changes the span used for evaluation of the field.
The only prefix currently supported is root
, as in root.http.status
.
Specifying root.
causes the condition to be evaluated against the root span.
For example, if the Field
is root.url
, then the condition will be processed using the url field from the root span.
The setting Scope: span
for a rule does not change the meaning of this prefix -- the condition is still evaluated on the root span and is treated as if it were part of the span being processed.
When using the root.
prefix on a field with a not-exists
operator, include the has-root-span: true
condition in the rule.
The not-exists
condition on a root.
-prefixed field will evaluate to false if the existence of the root span is not checked and the root span does not exist.
The primary reason a root span is not present on a trace when a sampling decision is being made is when the root span takes longer to complete than the configured TraceTimeout.
- Type:
string
An array of field names to check.
These can name any field in the trace.
The fields are checked in the order defined here, and the first named field that contains a value will be used for the condition.
Only the first populated field will be used, even if the condition fails.
If a root.
prefix is present on a field, but the root span is not on the trace, that field will be skipped.
If none of the fields are present, then the condition will not match.
The comparison is case-sensitive.
All fields are checked as individual fields before any of them are checked as nested fields (see CheckNestedFields
).
- Type:
stringarray
The comparison operator to use.
String comparisons are case-sensitive.
For most cases, use negative operators (!=
, does-not-contain
, and not-exists
) in a rule with a scope of "span".
WARNING: Rules can have Scope: trace
or Scope: span
; a negative operator with Scope: trace
will be true if any single span in the entire trace matches the negative condition.
This is almost never desired behavior.
- Type:
string
- Options:
=
,!=
,>
,<
,>=
,<=
,starts-with
,contains
,does-not-contain
,exists
,not-exists
,has-root-span
,matches
The value to compare against.
If Datatype
is not specified, then the value and the field will be compared based on the type of the field.
- Type:
anyscalar
The datatype to use when comparing the value and the field.
If Datatype
is specified, then both values will be converted (best-effort) to that type and then compared.
Errors in conversion will result in the comparison evaluating to false
.
This is especially useful when a field like http status code
may be rendered as strings by some environments and as numbers or booleans by others.
- Type:
string
Total Throughput Sampler (TotalThroughputSampler
) attempts to meet a goal of a fixed number of events per second sent to Honeycomb.
This sampler is deprecated and present mainly for compatibility.
Consider using either EMAThroughputSampler
or WindowedThroughputSampler
instead.
If your key space is sharded across different servers, then this is a good method for making sure each server sends roughly the same volume of content to Honeycomb.
It performs poorly when the active keyspace is very large.
GoalThroughputPerSec
* ClearFrequency
defines the upper limit of the number of keys that can be reported and stay under the goal, but with that many keys, you'll only get one event per key per ClearFrequencySec
, which is very coarse.
Aim for at least 1 event per key per sec to 1 event per key per 10sec to get reasonable data.
In other words, the number of active keys should be less than 10 * GoalThroughputPerSec
.
The desired throughput per second of events sent to Honeycomb. This is the number of events per second you want to send. This is not the same as the Sample Rate.
- Type:
int
Indicates whether to use the cluster size to calculate the goal throughput.
If true
, then the goal throughput will be divided by the number of instances in the cluster.
If false
, then the goal throughput will be the value specified in GoalThroughputPerSec
.
- Type:
bool
The duration after which the Dynamic Sampler should reset its internal counters. It should be specified as a duration string. For example, "30s" or "1m". Defaults to "30s".
- Type:
duration
A list of all the field names to use to form the key that will be handed to the Dynamic Sampler.
The combination of values from all of these fields should reflect how interesting the trace is compared to another.
When choosing field names for FieldList
, a good field selection has consistent values for high-frequency, boring traffic, and unique values for outliers and interesting traffic.
Including an error field, or something like HTTP status code
, is an excellent choice.
Using fields with very high cardinality, like k8s.pod.id
, is a bad choice.
If the combination of fields essentially makes each trace unique, then the Dynamic Sampler will sample everything.
If the combination of fields is not unique enough, then you will not be guaranteed samples of the most interesting traces.
As an example, consider as a good set of fields: the combination of HTTP endpoint
(high-frequency and boring), HTTP method
, and status code
(normally boring but can become interesting when indicating an error) since it will allowing proper sampling of all endpoints under normal traffic and call out when there is failing traffic to any endpoint.
In contrast, for example, consider as a bad set of fields: a combination of HTTP endpoint
, status code
, and pod id
, since it would result in keys that are all unique, and therefore result in sampling 100% of traces.
For example, rather than a set of fields, using only the HTTP endpoint
field is a bad choice, as it is not unique enough, and therefore interesting traces, like traces that experienced a 500
, might not be sampled.
Field names may come from any span in the trace; if they occur on multiple spans, then all unique values will be included in the key.
- Type:
stringarray
Limits the number of distinct keys tracked by the sampler.
Once MaxKeys
is reached, new keys will not be included in the sample rate map, but existing keys will continue to be be counted.
Use this field to keep the sample rate map size under control.
Defaults to 500
; Dynamic Samplers will rarely achieve their sampling goals with more keys than this.
- Type:
int
Indicates whether to include the trace length (number of spans in the trace) as part of the key.
The number of spans is exact, so if there are normally small variations in trace length, we recommend setting this field to false
.
If your traces are consistent lengths and changes in trace length is a useful indicator to view in Honeycomb, then set this field to true
.
- Type:
bool