README.md

Timelapse-Panner-based-on-Arduino-and-28BYJ-48 5V Stepper Motor

Timelapse panner using Arduino and stepper motor for Go Pro cameras

This repository is to store my files for a timelapse panner. Intended for a GoPro type camera, it does also support a heavy DSLR, but use with caution.

The original software isn’t mine, but did need to be tweaked slightly. I have included my files for laser cutting.

I used an Arduino Nano and a base board which are cheap off ebay. This effectively turns a Nano into an Uno form factor. The holes cut into the base will allow for an UNO to be fitted.

I also added a bleeper to alert me when the timelapse is up, this is optional.