Skip to content

Latest commit

 

History

History
96 lines (72 loc) · 5.58 KB

README.md

File metadata and controls

96 lines (72 loc) · 5.58 KB

kecho

This is a lightweight echo server implemented in the Linux kernel mode. Since a device driver named "echo" exists in directory "drivers/misc/echo" of Linux kernel tree, we specify kecho as the registered kernel module name.

Usage

Run make to build the kernel module along with userspace implementation and generic benchmarking tool:

$ make

On module loading, you can pass the following parameters to the module:

  • port (12345 by default)

    Port you want the module to listen. If the default port is in use, or you simply want to use another port, you can use this param to specify.

  • backlog (128 by default)

    Backlog amount you want the module to use. Typically, you only need to change this if you encounter warning of too much concurrent connections, which will be logged in the kernel message like this, Possible SYN flooding on port 12345. For details about SYN flooding, you can refer to the SYN flood wiki. Changing this param allows the kernel to handle more/less connections concurrently.

  • bench (0 by default)

    By setting this param to 1, you gain better cache locality during benchmarking the module. More specifically, we use WQ_UNBOUND as workqueue (hereafter called "wq") creation flag for the module by default, because this flag allows you to establish both long term (use telnet-like program to interact with the module) and short term (benchmarking) connection to the module. However, this flag has a trade-off, which is cache locality. The origin of this trade-off is that tasks submitted to a unbounded wq are executed by arbitrary CPU core. Therefore, you can set the param to 1 to disable WQ_UNBOUND flag. By disabling this flag, tasks submitted to the CMWQ are actually submitted to a wq named system wq, which is a wq shared by the whole system. Tasks in the system wq are executed by the CPU core who submitted the task at most of the time. BE AWARE that if you use telnet-like program to interact with the module with the param set to 1, your machine may get unstable since your connection may stall other tasks in the system wq. For details about the CMWQ, you can refer to the documentation.

$ sudo insmod kecho.ko port=<port_you_want> backlog=<amount_you_want> bench=<either_1_or_0>

After the module is loaded, you can use telnet command to interact with it:

$ telnet 127.0.0.1 12345

Alternatively, you can execute the builtin test suite:

$ make check

Also, you can start benchmarking either kecho or user-echo-server by running the command at below. The benchmarking tool evaluates response time of the echo servers at given amount of concurrent connections. It starts by creating number of threads (which is specified via MAX_THREAD in bench.c) requested, once all threads are created, it starts the benchmarking by waking up all threads with pthread_cond_broadcast(), each thread then creates their own socket and sends message to the server, afterward, they wait for echo message sent by the server and then record time elapsed by sending and receiving the message.

$ ./bench

Note that too much concurrent connections would be treated as sort of DDoS attack, this is caused by the kernel attributes and application specified TCP backlog (kernel: tcp_max_syn_backlog and somaxconn. Application (kecho/user-echo-server): backlog). Nevertheless, maximum number of fd per-process is 1024 by default. These limitations can cause performance degration of the module, if you want to perform the benchmarking without such degration, try the following configurations:

  • Use the following commands to adjust kernel attributes:

    $ sudo sysctl net.core.somaxconn=<depends_on_MAX_THREAD>
    $ sudo sysctl net.ipv4.tcp_max_syn_backlog=<ditto>

    Note that $ sysctl net.core.somaxconn can get current value. somaxconn is max amount of established connection, whereas tcp_max_syn_backlog is max amount of connection at first step of TCP 3-way handshake (SYN).

  • Use the following command to enlarge limitation of fd per-process:

    $ ulimit -n <ditto>

    Note that this modification only effects on process which executes the command and its child processes

  • Specify backlog with value as large as net.ipv4.tcp_max_syn_backlog.

Remember to reset the modifications after benchmarking to keep stability of your machine.

To visualize the benchmark results with gnuplot, run the following command to generate the image, and view the result with your image viewer.

$ make plot

drop-tcp-socket

In case of being unable to release TCP connections, there is another Linux kernel module, drop-tcp-socket, which allows one to drop specific TCP connections. It is extremely useful for dropping TIME-WAIT sockets.

Load drop-tcp-socket kernel module:

$ sudo insmod drop-tcp-socket.ko

Drop single TCP connection: (Assume port 12345 was listened by kecho)

$ netstat -n | grep WAIT | grep 12345
tcp        0      0 127.0.0.1:36986         127.0.0.1:12345         TIME_WAIT
$ echo "127.0.0.1:36986 127.0.0.1:12345" | sudo tee /proc/net/drop_tcp_sock

Drop multiple TCP connections:

$ netstat -n | grep WAIT | grep 12345 | awk '{print $4" "$5}' | sudo tee /proc/net/drop_tcp_sock

License

kecho is released under the MIT License. Use of this source code is governed by a MIT License that can be found in the LICENSE file.