diff --git a/Marlin/src/MarlinCore.cpp b/Marlin/src/MarlinCore.cpp
index 976edfe7ce70..5c4f5a4413d6 100644
--- a/Marlin/src/MarlinCore.cpp
+++ b/Marlin/src/MarlinCore.cpp
@@ -240,10 +240,6 @@ bool wait_for_heatup = true;
 
 #endif
 
-// Inactivity shutdown
-millis_t max_inactive_time, // = 0
-         stepper_inactive_time = SEC_TO_MS(DEFAULT_STEPPER_DEACTIVE_TIME);
-
 #if PIN_EXISTS(CHDK)
   extern millis_t chdk_timeout;
 #endif
@@ -469,26 +465,39 @@ inline void manage_inactivity(const bool ignore_stepper_queue=false) {
 
   const millis_t ms = millis();
 
-  if (max_inactive_time && ELAPSED(ms, gcode.previous_move_ms + max_inactive_time)) {
+  // Prevent steppers timing-out in the middle of M600
+  // unless PAUSE_PARK_NO_STEPPER_TIMEOUT is disabled
+  const bool parked_or_ignoring = ignore_stepper_queue ||
+     (BOTH(ADVANCED_PAUSE_FEATURE, PAUSE_PARK_NO_STEPPER_TIMEOUT) && did_pause_print);
+
+  // Reset both the M18/M84 activity timeout and the M85 max 'kill' timeout
+  if (parked_or_ignoring) gcode.reset_stepper_timeout(ms);
+
+  if (gcode.stepper_max_timed_out(ms)) {
     SERIAL_ERROR_START();
     SERIAL_ECHOLNPAIR(STR_KILL_INACTIVE_TIME, parser.command_ptr);
     kill();
   }
 
-  // Prevent steppers timing-out in the middle of M600
-  #define STAY_TEST (BOTH(ADVANCED_PAUSE_FEATURE, PAUSE_PARK_NO_STEPPER_TIMEOUT) && did_pause_print)
+  // M18 / M94 : Handle steppers inactive time timeout
+  if (gcode.stepper_inactive_time) {
 
-  if (stepper_inactive_time) {
     static bool already_shutdown_steppers; // = false
+
+    // Any moves in the planner? Resets both the M18/M84
+    // activity timeout and the M85 max 'kill' timeout
     if (planner.has_blocks_queued())
-      gcode.reset_stepper_timeout();
-    else if (!STAY_TEST && !ignore_stepper_queue && ELAPSED(ms, gcode.previous_move_ms + stepper_inactive_time)) {
+      gcode.reset_stepper_timeout(ms);
+    else if (!parked_or_ignoring && gcode.stepper_inactive_timeout()) {
       if (!already_shutdown_steppers) {
         already_shutdown_steppers = true;  // L6470 SPI will consume 99% of free time without this
+
+        // Individual axes will be disabled if configured
         if (ENABLED(DISABLE_INACTIVE_X)) DISABLE_AXIS_X();
         if (ENABLED(DISABLE_INACTIVE_Y)) DISABLE_AXIS_Y();
         if (ENABLED(DISABLE_INACTIVE_Z)) DISABLE_AXIS_Z();
         if (ENABLED(DISABLE_INACTIVE_E)) disable_e_steppers();
+
         #if BOTH(HAS_LCD_MENU, AUTO_BED_LEVELING_UBL)
           if (ubl.lcd_map_control) {
             ubl.lcd_map_control = false;
@@ -601,7 +610,7 @@ inline void manage_inactivity(const bool ignore_stepper_queue=false) {
         }
       #endif // !SWITCHING_EXTRUDER
 
-      gcode.reset_stepper_timeout();
+      gcode.reset_stepper_timeout(ms);
     }
   #endif // EXTRUDER_RUNOUT_PREVENT
 
diff --git a/Marlin/src/MarlinCore.h b/Marlin/src/MarlinCore.h
index 1ed897483572..18b679aca136 100644
--- a/Marlin/src/MarlinCore.h
+++ b/Marlin/src/MarlinCore.h
@@ -87,9 +87,6 @@ extern bool wait_for_heatup;
   void wait_for_user_response(millis_t ms=0, const bool no_sleep=false);
 #endif
 
-// Inactivity shutdown timer
-extern millis_t max_inactive_time, stepper_inactive_time;
-
 #if ENABLED(PSU_CONTROL)
   extern bool powersupply_on;
   #define PSU_PIN_ON()  do{ OUT_WRITE(PS_ON_PIN,  PSU_ACTIVE_HIGH); powersupply_on = true; }while(0)
diff --git a/Marlin/src/feature/bedlevel/ubl/ubl.cpp b/Marlin/src/feature/bedlevel/ubl/ubl.cpp
index 8d382e827327..e08debf1d34b 100644
--- a/Marlin/src/feature/bedlevel/ubl/ubl.cpp
+++ b/Marlin/src/feature/bedlevel/ubl/ubl.cpp
@@ -206,7 +206,7 @@
         if (human) SERIAL_CHAR(is_current ? ']' : ' ');
 
         SERIAL_FLUSHTX();
-        idle();
+        idle_no_sleep();
       }
       if (!lcd) SERIAL_EOL();
 
diff --git a/Marlin/src/gcode/bedlevel/abl/G29.cpp b/Marlin/src/gcode/bedlevel/abl/G29.cpp
index 01871ec7e662..99f07bc19b3e 100644
--- a/Marlin/src/gcode/bedlevel/abl/G29.cpp
+++ b/Marlin/src/gcode/bedlevel/abl/G29.cpp
@@ -164,6 +164,8 @@
  */
 G29_TYPE GcodeSuite::G29() {
 
+  reset_stepper_timeout();
+
   const bool seenQ = EITHER(DEBUG_LEVELING_FEATURE, PROBE_MANUALLY) && parser.seen('Q');
 
   // G29 Q is also available if debugging
@@ -675,7 +677,7 @@ G29_TYPE GcodeSuite::G29() {
           #endif
 
           abl_should_enable = false;
-          idle();
+          idle_no_sleep();
 
         } // inner
       } // outer
diff --git a/Marlin/src/gcode/calibrate/G28.cpp b/Marlin/src/gcode/calibrate/G28.cpp
index 982c9e9d3cab..806a8d50d678 100644
--- a/Marlin/src/gcode/calibrate/G28.cpp
+++ b/Marlin/src/gcode/calibrate/G28.cpp
@@ -203,15 +203,15 @@
  */
 void GcodeSuite::G28() {
 
-#if ENABLED(LASER_MOVE_G28_OFF)
-  cutter.set_inline_enabled(false);       // turn off laser
-#endif
-
   if (DEBUGGING(LEVELING)) {
     DEBUG_ECHOLNPGM(">>> G28");
     log_machine_info();
   }
 
+  #if ENABLED(LASER_MOVE_G28_OFF)
+    cutter.set_inline_enabled(false);       // turn off laser
+  #endif
+
   TERN_(DWIN_CREALITY_LCD, HMI_flag.home_flag = true);
 
   #if ENABLED(DUAL_X_CARRIAGE)
@@ -251,6 +251,9 @@ void GcodeSuite::G28() {
 
   TERN_(CNC_WORKSPACE_PLANES, workspace_plane = PLANE_XY);
 
+  // Count this command as movement / activity
+  reset_stepper_timeout();
+
   #define HAS_CURRENT_HOME(N) (defined(N##_CURRENT_HOME) && N##_CURRENT_HOME != N##_CURRENT)
   #if HAS_CURRENT_HOME(X) || HAS_CURRENT_HOME(X2) || HAS_CURRENT_HOME(Y) || HAS_CURRENT_HOME(Y2)
     #define HAS_HOMING_CURRENT 1
diff --git a/Marlin/src/gcode/config/M301.cpp b/Marlin/src/gcode/config/M301.cpp
index 54d32c865074..a68b64e0583f 100644
--- a/Marlin/src/gcode/config/M301.cpp
+++ b/Marlin/src/gcode/config/M301.cpp
@@ -30,6 +30,8 @@
 /**
  * M301: Set PID parameters P I D (and optionally C, L)
  *
+ *   E[extruder] Default: 0
+ *
  *   P[float] Kp term
  *   I[float] Ki term (unscaled)
  *   D[float] Kd term (unscaled)
@@ -65,6 +67,7 @@ void GcodeSuite::M301() {
     #endif
 
     thermalManager.updatePID();
+
     SERIAL_ECHO_START();
     #if ENABLED(PID_PARAMS_PER_HOTEND)
       SERIAL_ECHOPAIR(" e:", e); // specify extruder in serial output
diff --git a/Marlin/src/gcode/control/M17_M18_M84.cpp b/Marlin/src/gcode/control/M17_M18_M84.cpp
index aee7d616a139..55a219917c7d 100644
--- a/Marlin/src/gcode/control/M17_M18_M84.cpp
+++ b/Marlin/src/gcode/control/M17_M18_M84.cpp
@@ -50,6 +50,7 @@ void GcodeSuite::M17() {
  */
 void GcodeSuite::M18_M84() {
   if (parser.seenval('S')) {
+    reset_stepper_timeout();
     stepper_inactive_time = parser.value_millis_from_seconds();
   }
   else {
diff --git a/Marlin/src/gcode/control/M85.cpp b/Marlin/src/gcode/control/M85.cpp
index 1cdf49f6096c..224defed738a 100644
--- a/Marlin/src/gcode/control/M85.cpp
+++ b/Marlin/src/gcode/control/M85.cpp
@@ -21,7 +21,6 @@
  */
 
 #include "../gcode.h"
-#include "../../MarlinCore.h" // for max_inactive_time
 
 /**
  * M85: Set inactivity shutdown timer with parameter S<seconds>. To disable set zero (default)
diff --git a/Marlin/src/gcode/control/T.cpp b/Marlin/src/gcode/control/T.cpp
index e6b3bb5d6817..872b3d548801 100644
--- a/Marlin/src/gcode/control/T.cpp
+++ b/Marlin/src/gcode/control/T.cpp
@@ -53,6 +53,9 @@ void GcodeSuite::T(const uint8_t tool_index) {
     DEBUG_POS("BEFORE", current_position);
   }
 
+  // Count this command as movement / activity
+  reset_stepper_timeout();
+
   #if ENABLED(PRUSA_MMU2)
     if (parser.string_arg) {
       mmu2.tool_change(parser.string_arg);   // Special commands T?/Tx/Tc
diff --git a/Marlin/src/gcode/gcode.cpp b/Marlin/src/gcode/gcode.cpp
index d34e0665c6e5..0b0a29cc2039 100644
--- a/Marlin/src/gcode/gcode.cpp
+++ b/Marlin/src/gcode/gcode.cpp
@@ -59,7 +59,10 @@ GcodeSuite gcode;
 
 #include "../MarlinCore.h" // for idle()
 
-millis_t GcodeSuite::previous_move_ms;
+// Inactivity shutdown
+millis_t GcodeSuite::previous_move_ms = 0,
+         GcodeSuite::max_inactive_time = 0,
+         GcodeSuite::stepper_inactive_time = SEC_TO_MS(DEFAULT_STEPPER_DEACTIVE_TIME);
 
 // Relative motion mode for each logical axis
 static constexpr xyze_bool_t ar_init = AXIS_RELATIVE_MODES;
diff --git a/Marlin/src/gcode/gcode.h b/Marlin/src/gcode/gcode.h
index ab17cc8d7df3..72ae1f92df85 100644
--- a/Marlin/src/gcode/gcode.h
+++ b/Marlin/src/gcode/gcode.h
@@ -334,8 +334,14 @@ class GcodeSuite {
     static bool select_coordinate_system(const int8_t _new);
   #endif
 
-  static millis_t previous_move_ms;
-  FORCE_INLINE static void reset_stepper_timeout() { previous_move_ms = millis(); }
+  static millis_t previous_move_ms, max_inactive_time, stepper_inactive_time;
+  FORCE_INLINE static void reset_stepper_timeout(const millis_t ms=millis()) { previous_move_ms = ms; }
+  FORCE_INLINE static bool stepper_max_timed_out(const millis_t ms=millis()) {
+    return max_inactive_time && ELAPSED(ms, previous_move_ms + max_inactive_time);
+  }
+  FORCE_INLINE static bool stepper_inactive_timeout(const millis_t ms=millis()) {
+    return ELAPSED(ms, previous_move_ms + stepper_inactive_time);
+  }
 
   static int8_t get_target_extruder_from_command();
   static int8_t get_target_e_stepper_from_command();
diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h
index 71b5d7a89aa4..639c5765afb1 100644
--- a/Marlin/src/inc/Conditionals_LCD.h
+++ b/Marlin/src/inc/Conditionals_LCD.h
@@ -477,6 +477,8 @@
     #define HAS_MULTI_HOTEND 1
     #define HAS_HOTEND_OFFSET 1
   #endif
+#else
+  #undef PID_PARAMS_PER_HOTEND
 #endif
 
 // Helper macros for extruder and hotend arrays
diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
index d99330916176..87caa23a8067 100644
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@@ -1629,28 +1629,8 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
 #endif
 
 /**
- * Test Heater, Temp Sensor, and Extruder Pins; Sensor Type must also be set.
+ * A Sensor ID has to be set for each heater
  */
-#if !HAS_HEATER_0
-  #error "HEATER_0_PIN not defined for this board."
-#elif !ANY_PIN(TEMP_0, MAX6675_SS)
-  #error "TEMP_0_PIN not defined for this board."
-#elif ((defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && !PINS_EXIST(E0_STEP, E0_DIR))
-  #error "E0_STEP_PIN or E0_DIR_PIN not defined for this board."
-#elif ( !(defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && (!PINS_EXIST(E0_STEP, E0_DIR) || !HAS_E0_ENABLE))
-  #error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board."
-#elif EXTRUDERS && TEMP_SENSOR_0 == 0
-  #error "TEMP_SENSOR_0 is required with any extruders."
-#endif
-
-// Pins are required for heaters
-#if ENABLED(HEATER_0_USES_MAX6675) && !PIN_EXISTS(MAX6675_SS)
-  #error "MAX6675_SS_PIN (required for TEMP_SENSOR_0) not defined for this board."
-#elif HAS_HOTEND && !HAS_TEMP_HOTEND
-  #error "TEMP_0_PIN (required for TEMP_SENSOR_0) not defined for this board."
-#elif EITHER(HAS_MULTI_HOTEND, HEATERS_PARALLEL) && !HAS_HEATER_1
-  #error "HEATER_1_PIN not defined for this board."
-#endif
 
 #if HAS_MULTI_HOTEND
   #if ENABLED(HEATER_1_USES_MAX6675) && !PIN_EXISTS(MAX6675_SS2)
@@ -1792,6 +1772,30 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
   #error "TEMP_SENSOR_1 is required with TEMP_SENSOR_1_AS_REDUNDANT."
 #endif
 
+/**
+ * Test Heater, Temp Sensor, and Extruder Pins
+ */
+#if !HAS_HEATER_0
+  #error "HEATER_0_PIN not defined for this board."
+#elif !ANY_PIN(TEMP_0, MAX6675_SS)
+  #error "TEMP_0_PIN not defined for this board."
+#elif ((defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && !PINS_EXIST(E0_STEP, E0_DIR))
+  #error "E0_STEP_PIN or E0_DIR_PIN not defined for this board."
+#elif ( !(defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && (!PINS_EXIST(E0_STEP, E0_DIR) || !HAS_E0_ENABLE))
+  #error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board."
+#elif EXTRUDERS && TEMP_SENSOR_0 == 0
+  #error "TEMP_SENSOR_0 is required if there are any extruders."
+#endif
+
+// Pins are required for heaters
+#if ENABLED(HEATER_0_USES_MAX6675) && !PIN_EXISTS(MAX6675_SS)
+  #error "MAX6675_SS_PIN (required for TEMP_SENSOR_0) not defined for this board."
+#elif HAS_HOTEND && !HAS_TEMP_HOTEND
+  #error "TEMP_0_PIN (required for TEMP_SENSOR_0) not defined for this board."
+#elif EITHER(HAS_MULTI_HOTEND, HEATERS_PARALLEL) && !HAS_HEATER_1
+  #error "HEATER_1_PIN is not defined. TEMP_SENSOR_1 might not be set, or the board (not EEB / EEF?) doesn't define a pin."
+#endif
+
 /**
  * Temperature status LEDs
  */
diff --git a/Marlin/src/inc/Version.h b/Marlin/src/inc/Version.h
index f3fea10e0aac..f8d83c393437 100644
--- a/Marlin/src/inc/Version.h
+++ b/Marlin/src/inc/Version.h
@@ -42,7 +42,7 @@
  * version was tagged.
  */
 #ifndef STRING_DISTRIBUTION_DATE
-  #define STRING_DISTRIBUTION_DATE "2020-07-01"
+  #define STRING_DISTRIBUTION_DATE "2020-07-02"
 #endif
 
 /**
diff --git a/Marlin/src/lcd/menu/menu_advanced.cpp b/Marlin/src/lcd/menu/menu_advanced.cpp
index b57e442b6fba..d53a4d2495f5 100644
--- a/Marlin/src/lcd/menu/menu_advanced.cpp
+++ b/Marlin/src/lcd/menu/menu_advanced.cpp
@@ -205,16 +205,12 @@ void menu_cancelobject();
   // Helpers for editing PID Ki & Kd values
   // grab the PID value out of the temp variable; scale it; then update the PID driver
   void copy_and_scalePID_i(int16_t e) {
-    #if DISABLED(PID_PARAMS_PER_HOTEND) || HOTENDS == 1
-      UNUSED(e);
-    #endif
+    TERN(PID_PARAMS_PER_HOTEND,,UNUSED(e));
     PID_PARAM(Ki, e) = scalePID_i(raw_Ki);
     thermalManager.updatePID();
   }
   void copy_and_scalePID_d(int16_t e) {
-    #if DISABLED(PID_PARAMS_PER_HOTEND) || HOTENDS == 1
-      UNUSED(e);
-    #endif
+    TERN(PID_PARAMS_PER_HOTEND,,UNUSED(e));
     PID_PARAM(Kd, e) = scalePID_d(raw_Kd);
     thermalManager.updatePID();
   }
@@ -239,7 +235,7 @@ void menu_cancelobject();
 
 #if HAS_HOTEND
   DEFINE_PIDTEMP_FUNCS(0);
-  #if BOTH(HAS_MULTI_HOTEND, PID_PARAMS_PER_HOTEND)
+  #if ENABLED(PID_PARAMS_PER_HOTEND)
     REPEAT_S(1, HOTENDS, DEFINE_PIDTEMP_FUNCS)
   #endif
 #endif
@@ -314,7 +310,7 @@ void menu_cancelobject();
     #endif
 
     PID_EDIT_MENU_ITEMS(0);
-    #if BOTH(HAS_MULTI_HOTEND, PID_PARAMS_PER_HOTEND)
+    #if ENABLED(PID_PARAMS_PER_HOTEND)
       REPEAT_S(1, HOTENDS, PID_EDIT_MENU_ITEMS)
     #endif
 
diff --git a/Marlin/src/module/configuration_store.cpp b/Marlin/src/module/configuration_store.cpp
index 41ce618a0432..8ff873111413 100644
--- a/Marlin/src/module/configuration_store.cpp
+++ b/Marlin/src/module/configuration_store.cpp
@@ -2587,12 +2587,59 @@ void MarlinSettings::reset() {
   //
 
   #if ENABLED(PIDTEMP)
+    #if ENABLED(PID_PARAMS_PER_HOTEND)
+      constexpr float defKp[] =
+        #ifdef DEFAULT_Kp_LIST
+          DEFAULT_Kp_LIST
+        #else
+          ARRAY_BY_HOTENDS1(DEFAULT_Kp)
+        #endif
+      , defKi[] =
+        #ifdef DEFAULT_Ki_LIST
+          DEFAULT_Ki_LIST
+        #else
+          ARRAY_BY_HOTENDS1(DEFAULT_Ki)
+        #endif
+      , defKd[] =
+        #ifdef DEFAULT_Kd_LIST
+          DEFAULT_Kd_LIST
+        #else
+          ARRAY_BY_HOTENDS1(DEFAULT_Kd)
+        #endif
+      ;
+      static_assert(WITHIN(COUNT(defKp), 1, HOTENDS), "DEFAULT_Kp_LIST must have between 1 and HOTENDS items.");
+      static_assert(WITHIN(COUNT(defKi), 1, HOTENDS), "DEFAULT_Ki_LIST must have between 1 and HOTENDS items.");
+      static_assert(WITHIN(COUNT(defKd), 1, HOTENDS), "DEFAULT_Kd_LIST must have between 1 and HOTENDS items.");
+      #if ENABLED(PID_EXTRUSION_SCALING)
+        constexpr float defKc[] =
+          #ifdef DEFAULT_Kc_LIST
+            DEFAULT_Kc_LIST
+          #else
+            ARRAY_BY_HOTENDS1(DEFAULT_Kc)
+          #endif
+        ;
+        static_assert(WITHIN(COUNT(defKc), 1, HOTENDS), "DEFAULT_Kc_LIST must have between 1 and HOTENDS items.");
+      #endif
+      #if ENABLED(PID_FAN_SCALING)
+        constexpr float defKf[] =
+          #ifdef DEFAULT_Kf_LIST
+            DEFAULT_Kf_LIST
+          #else
+            ARRAY_BY_HOTENDS1(DEFAULT_Kf)
+          #endif
+        ;
+        static_assert(WITHIN(COUNT(defKf), 1, HOTENDS), "DEFAULT_Kf_LIST must have between 1 and HOTENDS items.");
+      #endif
+      #define PID_DEFAULT(N,E) def##N[E]
+    #else
+      #define PID_DEFAULT(N,E) DEFAULT_##N
+    #endif
     HOTEND_LOOP() {
-      PID_PARAM(Kp, e) = float(DEFAULT_Kp);
-      PID_PARAM(Ki, e) = scalePID_i(DEFAULT_Ki);
-      PID_PARAM(Kd, e) = scalePID_d(DEFAULT_Kd);
-      TERN_(PID_EXTRUSION_SCALING, PID_PARAM(Kc, e) = DEFAULT_Kc);
-      TERN_(PID_FAN_SCALING, PID_PARAM(Kf, e) = DEFAULT_Kf);
+      PID_PARAM(Kp, e) = float(PID_DEFAULT(Kp, ALIM(e, defKp)));
+      PID_PARAM(Ki, e) = scalePID_i(PID_DEFAULT(Ki, ALIM(e, defKi)));
+      PID_PARAM(Kd, e) = scalePID_d(PID_DEFAULT(Kd, ALIM(e, defKd)));
+      TERN_(PID_EXTRUSION_SCALING, PID_PARAM(Kc, e) = float(PID_DEFAULT(Kc, ALIM(e, defKc))));
+      TERN_(PID_FAN_SCALING, PID_PARAM(Kf, e) = float(PID_DEFAULT(Kf, ALIM(e, defKf))));
     }
   #endif
 
@@ -3140,7 +3187,7 @@ void MarlinSettings::reset() {
         HOTEND_LOOP() {
           CONFIG_ECHO_START();
           SERIAL_ECHOPAIR_P(
-            #if BOTH(HAS_MULTI_HOTEND, PID_PARAMS_PER_HOTEND)
+            #if ENABLED(PID_PARAMS_PER_HOTEND)
               PSTR("  M301 E"), e,
               SP_P_STR
             #else
diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp
index b95fdbdd86c7..1ca988e5d7fb 100644
--- a/Marlin/src/module/temperature.cpp
+++ b/Marlin/src/module/temperature.cpp
@@ -110,12 +110,12 @@
 
 #if HOTEND_USES_THERMISTOR
   #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
-    static const void* heater_ttbl_map[2] = { (void*)HEATER_0_TEMPTABLE, (void*)HEATER_1_TEMPTABLE };
+    static const temp_entry_t* heater_ttbl_map[2] = { HEATER_0_TEMPTABLE, HEATER_1_TEMPTABLE };
     static constexpr uint8_t heater_ttbllen_map[2] = { HEATER_0_TEMPTABLE_LEN, HEATER_1_TEMPTABLE_LEN };
   #else
     #define NEXT_TEMPTABLE(N) ,HEATER_##N##_TEMPTABLE
     #define NEXT_TEMPTABLE_LEN(N) ,HEATER_##N##_TEMPTABLE_LEN
-    static const void* heater_ttbl_map[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_TEMPTABLE REPEAT_S(1, HOTENDS, NEXT_TEMPTABLE));
+    static const temp_entry_t* heater_ttbl_map[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_TEMPTABLE REPEAT_S(1, HOTENDS, NEXT_TEMPTABLE));
     static constexpr uint8_t heater_ttbllen_map[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_TEMPTABLE_LEN REPEAT_S(1, HOTENDS, NEXT_TEMPTABLE_LEN));
   #endif
 #endif
@@ -900,11 +900,13 @@ void Temperature::min_temp_error(const heater_ind_t heater) {
           SERIAL_ECHO_START();
           SERIAL_ECHOPAIR(STR_PID_DEBUG, ee, STR_PID_DEBUG_INPUT, temp_hotend[ee].celsius, STR_PID_DEBUG_OUTPUT, pid_output);
           #if DISABLED(PID_OPENLOOP)
+          {
             SERIAL_ECHOPAIR( STR_PID_DEBUG_PTERM, work_pid[ee].Kp, STR_PID_DEBUG_ITERM, work_pid[ee].Ki, STR_PID_DEBUG_DTERM, work_pid[ee].Kd
               #if ENABLED(PID_EXTRUSION_SCALING)
                 , STR_PID_DEBUG_CTERM, work_pid[ee].Kc
               #endif
             );
+          }
           #endif
           SERIAL_EOL();
         }
@@ -920,7 +922,7 @@ void Temperature::min_temp_error(const heater_ind_t heater) {
     return pid_output;
   }
 
-#endif // HOTENDS
+#endif // HAS_HOTEND
 
 #if ENABLED(PIDTEMPBED)
 
@@ -1058,7 +1060,7 @@ void Temperature::manage_heater() {
 
     } // HOTEND_LOOP
 
-  #endif // HOTENDS
+  #endif // HAS_HOTEND
 
   #if HAS_AUTO_FAN
     if (ELAPSED(ms, next_auto_fan_check_ms)) { // only need to check fan state very infrequently
@@ -1208,22 +1210,22 @@ void Temperature::manage_heater() {
  * Bisect search for the range of the 'raw' value, then interpolate
  * proportionally between the under and over values.
  */
-#define SCAN_THERMISTOR_TABLE(TBL,LEN) do{                             \
-  uint8_t l = 0, r = LEN, m;                                           \
-  for (;;) {                                                           \
-    m = (l + r) >> 1;                                                  \
-    if (!m) return short(pgm_read_word(&TBL[0][1]));                   \
-    if (m == l || m == r) return short(pgm_read_word(&TBL[LEN-1][1])); \
-    short v00 = pgm_read_word(&TBL[m-1][0]),                           \
-          v10 = pgm_read_word(&TBL[m-0][0]);                           \
-         if (raw < v00) r = m;                                         \
-    else if (raw > v10) l = m;                                         \
-    else {                                                             \
-      const short v01 = short(pgm_read_word(&TBL[m-1][1])),            \
-                  v11 = short(pgm_read_word(&TBL[m-0][1]));            \
-      return v01 + (raw - v00) * float(v11 - v01) / float(v10 - v00);  \
-    }                                                                  \
-  }                                                                    \
+#define SCAN_THERMISTOR_TABLE(TBL,LEN) do{                            \
+  uint8_t l = 0, r = LEN, m;                                          \
+  for (;;) {                                                          \
+    m = (l + r) >> 1;                                                 \
+    if (!m) return int16_t(pgm_read_word(&TBL[0].celsius));           \
+    if (m == l || m == r) return int16_t(pgm_read_word(&TBL[LEN-1].celsius)); \
+    int16_t v00 = pgm_read_word(&TBL[m-1].value),                     \
+          v10 = pgm_read_word(&TBL[m-0].value);                       \
+         if (raw < v00) r = m;                                        \
+    else if (raw > v10) l = m;                                        \
+    else {                                                            \
+      const int16_t v01 = int16_t(pgm_read_word(&TBL[m-1].celsius)),  \
+                  v11 = int16_t(pgm_read_word(&TBL[m-0].celsius));    \
+      return v01 + (raw - v00) * float(v11 - v01) / float(v10 - v00); \
+    }                                                                 \
+  }                                                                   \
 }while(0)
 
 #if HAS_USER_THERMISTORS
@@ -1452,13 +1454,13 @@ void Temperature::manage_heater() {
 
     #if HOTEND_USES_THERMISTOR
       // Thermistor with conversion table?
-      const short(*tt)[][2] = (short(*)[][2])(heater_ttbl_map[e]);
+      const temp_entry_t(*tt)[] = (temp_entry_t(*)[])(heater_ttbl_map[e]);
       SCAN_THERMISTOR_TABLE((*tt), heater_ttbllen_map[e]);
     #endif
 
     return 0;
   }
-#endif // HOTENDS
+#endif // HAS_HOTEND
 
 #if HAS_HEATED_BED
   // Derived from RepRap FiveD extruder::getTemperature()
@@ -1790,80 +1792,91 @@ void Temperature::init() {
   #if HAS_HOTEND
 
     #define _TEMP_MIN_E(NR) do{ \
-      temp_range[NR].mintemp = HEATER_ ##NR## _MINTEMP; \
-      while (analog_to_celsius_hotend(temp_range[NR].raw_min, NR) < HEATER_ ##NR## _MINTEMP) \
+      const int16_t tmin = _MAX(HEATER_ ##NR## _MINTEMP, (int16_t)pgm_read_word(&HEATER_ ##NR## _TEMPTABLE[HEATER_ ##NR## _SENSOR_MINTEMP_IND].celsius)); \
+      temp_range[NR].mintemp = tmin; \
+      while (analog_to_celsius_hotend(temp_range[NR].raw_min, NR) < tmin) \
         temp_range[NR].raw_min += TEMPDIR(NR) * (OVERSAMPLENR); \
     }while(0)
     #define _TEMP_MAX_E(NR) do{ \
-      temp_range[NR].maxtemp = HEATER_ ##NR## _MAXTEMP; \
-      while (analog_to_celsius_hotend(temp_range[NR].raw_max, NR) > HEATER_ ##NR## _MAXTEMP) \
+      const int16_t tmax = _MIN(HEATER_ ##NR## _MAXTEMP, (int16_t)pgm_read_word(&HEATER_ ##NR## _TEMPTABLE[HEATER_ ##NR## _SENSOR_MAXTEMP_IND].celsius) - 1); \
+      temp_range[NR].maxtemp = tmax; \
+      while (analog_to_celsius_hotend(temp_range[NR].raw_max, NR) > tmax) \
         temp_range[NR].raw_max -= TEMPDIR(NR) * (OVERSAMPLENR); \
     }while(0)
 
-    #ifdef HEATER_0_MINTEMP
+    #if THERMISTOR_HEATER_0
+      #ifdef HEATER_0_MINTEMP
       _TEMP_MIN_E(0);
+      #endif
+      #ifdef HEATER_0_MAXTEMP
+        _TEMP_MAX_E(0);
+      #endif
     #endif
-    #ifdef HEATER_0_MAXTEMP
-      _TEMP_MAX_E(0);
-    #endif
-    #if HAS_MULTI_HOTEND
+
+    #if HAS_MULTI_HOTEND && THERMISTOR_HEATER_1
       #ifdef HEATER_1_MINTEMP
         _TEMP_MIN_E(1);
       #endif
       #ifdef HEATER_1_MAXTEMP
         _TEMP_MAX_E(1);
       #endif
-      #if HOTENDS > 2
-        #ifdef HEATER_2_MINTEMP
-          _TEMP_MIN_E(2);
-        #endif
-        #ifdef HEATER_2_MAXTEMP
-          _TEMP_MAX_E(2);
-        #endif
-        #if HOTENDS > 3
-          #ifdef HEATER_3_MINTEMP
-            _TEMP_MIN_E(3);
-          #endif
-          #ifdef HEATER_3_MAXTEMP
-            _TEMP_MAX_E(3);
-          #endif
-          #if HOTENDS > 4
-            #ifdef HEATER_4_MINTEMP
-              _TEMP_MIN_E(4);
-            #endif
-            #ifdef HEATER_4_MAXTEMP
-              _TEMP_MAX_E(4);
-            #endif
-            #if HOTENDS > 5
-              #ifdef HEATER_5_MINTEMP
-                _TEMP_MIN_E(5);
-              #endif
-              #ifdef HEATER_5_MAXTEMP
-                _TEMP_MAX_E(5);
-              #endif
-              #if HOTENDS > 6
-                #ifdef HEATER_6_MINTEMP
-                  _TEMP_MIN_E(6);
-                #endif
-                #ifdef HEATER_6_MAXTEMP
-                  _TEMP_MAX_E(6);
-                #endif
-                #if HOTENDS > 7
-                  #ifdef HEATER_7_MINTEMP
-                    _TEMP_MIN_E(7);
-                  #endif
-                  #ifdef HEATER_7_MAXTEMP
-                    _TEMP_MAX_E(7);
-                  #endif
-                #endif // HOTENDS > 7
-              #endif // HOTENDS > 6
-            #endif // HOTENDS > 5
-          #endif // HOTENDS > 4
-        #endif // HOTENDS > 3
-      #endif // HOTENDS > 2
-    #endif // HAS_MULTI_HOTEND
-
-  #endif // HOTENDS
+    #endif
+
+    #if HOTENDS > 2 && THERMISTOR_HEATER_2
+      #ifdef HEATER_2_MINTEMP
+        _TEMP_MIN_E(2);
+      #endif
+      #ifdef HEATER_2_MAXTEMP
+        _TEMP_MAX_E(2);
+      #endif
+    #endif
+
+    #if HOTENDS > 3 && THERMISTOR_HEATER_3
+      #ifdef HEATER_3_MINTEMP
+        _TEMP_MIN_E(3);
+      #endif
+      #ifdef HEATER_3_MAXTEMP
+        _TEMP_MAX_E(3);
+      #endif
+    #endif
+
+    #if HOTENDS > 4 && THERMISTOR_HEATER_4
+      #ifdef HEATER_4_MINTEMP
+        _TEMP_MIN_E(4);
+      #endif
+      #ifdef HEATER_4_MAXTEMP
+        _TEMP_MAX_E(4);
+      #endif
+    #endif
+
+    #if HOTENDS > 5 && THERMISTOR_HEATER_5
+      #ifdef HEATER_5_MINTEMP
+        _TEMP_MIN_E(5);
+      #endif
+      #ifdef HEATER_5_MAXTEMP
+        _TEMP_MAX_E(5);
+      #endif
+    #endif
+
+    #if HOTENDS > 6 && THERMISTOR_HEATER_6
+      #ifdef HEATER_6_MINTEMP
+        _TEMP_MIN_E(6);
+      #endif
+      #ifdef HEATER_6_MAXTEMP
+        _TEMP_MAX_E(6);
+      #endif
+    #endif
+
+    #if HOTENDS > 7 && THERMISTOR_HEATER_7
+      #ifdef HEATER_7_MINTEMP
+        _TEMP_MIN_E(7);
+      #endif
+      #ifdef HEATER_7_MAXTEMP
+        _TEMP_MAX_E(7);
+      #endif
+    #endif
+
+  #endif // HAS_HOTEND
 
   #if HAS_HEATED_BED
     #ifdef BED_MINTEMP
@@ -2319,7 +2332,7 @@ void Temperature::readings_ready() {
       }
     }
 
-  #endif // HOTENDS
+  #endif // HAS_HOTEND
 
   #if HAS_HEATED_BED
     #if TEMPDIR(BED) < 0
@@ -2573,6 +2586,10 @@ void Temperature::tick() {
         _SLOW_PWM(BED, soft_pwm_bed, temp_bed);
       #endif
 
+      #if HAS_HEATED_CHAMBER
+        _SLOW_PWM(CHAMBER, soft_pwm_chamber, temp_chamber);
+      #endif
+
     } // slow_pwm_count == 0
 
     #if HAS_HOTEND
@@ -2584,6 +2601,10 @@ void Temperature::tick() {
       _PWM_OFF(BED, soft_pwm_bed);
     #endif
 
+    #if HAS_HEATED_CHAMBER
+      _PWM_OFF(CHAMBER, soft_pwm_chamber);
+    #endif
+
     #if ENABLED(FAN_SOFT_PWM)
       if (pwm_count_tmp >= 127) {
         pwm_count_tmp = 0;
@@ -2662,6 +2683,7 @@ void Temperature::tick() {
         HOTEND_LOOP() soft_pwm_hotend[e].dec();
       #endif
       TERN_(HAS_HEATED_BED, soft_pwm_bed.dec());
+      TERN_(HAS_HEATED_CHAMBER, soft_pwm_chamber.dec());
     }
 
   #endif // SLOW_PWM_HEATERS
diff --git a/Marlin/src/module/temperature.h b/Marlin/src/module/temperature.h
index a6d702646dae..2f8ddbf7be22 100644
--- a/Marlin/src/module/temperature.h
+++ b/Marlin/src/module/temperature.h
@@ -37,13 +37,8 @@
   #define SOFT_PWM_SCALE 0
 #endif
 
-#if HOTENDS <= 1
-  #define HOTEND_INDEX  0
-  #define E_NAME
-#else
-  #define HOTEND_INDEX  e
-  #define E_NAME e
-#endif
+#define HOTEND_INDEX TERN(HAS_MULTI_HOTEND, e, 0)
+#define E_NAME TERN_(HAS_MULTI_HOTEND, e)
 
 // Identifiers for other heaters
 typedef enum : int8_t {
@@ -74,30 +69,18 @@ hotend_pid_t;
   typedef IF<(LPQ_MAX_LEN > 255), uint16_t, uint8_t>::type lpq_ptr_t;
 #endif
 
+#define PID_PARAM(F,H) _PID_##F(TERN(PID_PARAMS_PER_HOTEND, H, 0))
+#define _PID_Kp(H) TERN(PIDTEMP, Temperature::temp_hotend[H].pid.Kp, NAN)
+#define _PID_Ki(H) TERN(PIDTEMP, Temperature::temp_hotend[H].pid.Ki, NAN)
+#define _PID_Kd(H) TERN(PIDTEMP, Temperature::temp_hotend[H].pid.Kd, NAN)
 #if ENABLED(PIDTEMP)
-  #define _PID_Kp(H) Temperature::temp_hotend[H].pid.Kp
-  #define _PID_Ki(H) Temperature::temp_hotend[H].pid.Ki
-  #define _PID_Kd(H) Temperature::temp_hotend[H].pid.Kd
-  #if ENABLED(PID_EXTRUSION_SCALING)
-    #define _PID_Kc(H) Temperature::temp_hotend[H].pid.Kc
-  #else
-    #define _PID_Kc(H) 1
-  #endif
-
-  #if ENABLED(PID_FAN_SCALING)
-    #define _PID_Kf(H) Temperature::temp_hotend[H].pid.Kf
-  #else
-    #define _PID_Kf(H) 0
-  #endif
+  #define _PID_Kc(H) TERN(PID_EXTRUSION_SCALING, Temperature::temp_hotend[H].pid.Kc, 1)
+  #define _PID_Kf(H) TERN(PID_FAN_SCALING,       Temperature::temp_hotend[H].pid.Kf, 0)
 #else
-  #define _PID_Kp(H) NAN
-  #define _PID_Ki(H) NAN
-  #define _PID_Kd(H) NAN
   #define _PID_Kc(H) 1
+  #define _PID_Kf(H) 0
 #endif
 
-#define PID_PARAM(F,H) _PID_##F(H)
-
 /**
  * States for ADC reading in the ISR
  */
@@ -625,7 +608,7 @@ class Temperature {
         return ABS(degHotend(e) - temp) < (TEMP_HYSTERESIS);
       }
 
-    #endif // HOTENDS
+    #endif // HAS_HOTEND
 
     #if HAS_HEATED_BED
 
diff --git a/Marlin/src/module/thermistor/thermistor_1.h b/Marlin/src/module/thermistor/thermistor_1.h
index f3226da4754a..75ec433abc81 100644
--- a/Marlin/src/module/thermistor/thermistor_1.h
+++ b/Marlin/src/module/thermistor/thermistor_1.h
@@ -22,7 +22,7 @@
 #pragma once
 
 // R25 = 100 kOhm, beta25 = 4092 K, 4.7 kOhm pull-up, bed thermistor
-const short temptable_1[][2] PROGMEM = {
+const temp_entry_t temptable_1[] PROGMEM = {
   { OV(  23), 300 },
   { OV(  25), 295 },
   { OV(  27), 290 },
diff --git a/Marlin/src/module/thermistor/thermistor_10.h b/Marlin/src/module/thermistor/thermistor_10.h
index 9e89eab84a43..991440bce523 100644
--- a/Marlin/src/module/thermistor/thermistor_10.h
+++ b/Marlin/src/module/thermistor/thermistor_10.h
@@ -22,7 +22,7 @@
 #pragma once
 
 // R25 = 100 kOhm, beta25 = 3960 K, 4.7 kOhm pull-up, RS thermistor 198-961
-const short temptable_10[][2] PROGMEM = {
+const temp_entry_t temptable_10[] PROGMEM = {
   { OV(   1), 929 },
   { OV(  36), 299 },
   { OV(  71), 246 },
diff --git a/Marlin/src/module/thermistor/thermistor_1010.h b/Marlin/src/module/thermistor/thermistor_1010.h
index 200d9aed56f5..71e830d952fd 100644
--- a/Marlin/src/module/thermistor/thermistor_1010.h
+++ b/Marlin/src/module/thermistor/thermistor_1010.h
@@ -22,7 +22,7 @@
 #pragma once
 
 // Pt1000 with 1k0 pullup
-const short temptable_1010[][2] PROGMEM = {
+const temp_entry_t temptable_1010[] PROGMEM = {
   PtLine(  0, 1000, 1000),
   PtLine( 25, 1000, 1000),
   PtLine( 50, 1000, 1000),
diff --git a/Marlin/src/module/thermistor/thermistor_1047.h b/Marlin/src/module/thermistor/thermistor_1047.h
index af41a20a10c7..6a82d04be8fe 100644
--- a/Marlin/src/module/thermistor/thermistor_1047.h
+++ b/Marlin/src/module/thermistor/thermistor_1047.h
@@ -22,7 +22,7 @@
 #pragma once
 
 // Pt1000 with 4k7 pullup
-const short temptable_1047[][2] PROGMEM = {
+const temp_entry_t temptable_1047[] PROGMEM = {
   // only a few values are needed as the curve is very flat
   PtLine(  0, 1000, 4700),
   PtLine( 50, 1000, 4700),
@@ -30,5 +30,9 @@ const short temptable_1047[][2] PROGMEM = {
   PtLine(150, 1000, 4700),
   PtLine(200, 1000, 4700),
   PtLine(250, 1000, 4700),
-  PtLine(300, 1000, 4700)
+  PtLine(300, 1000, 4700),
+  PtLine(350, 1000, 4700),
+  PtLine(400, 1000, 4700),
+  PtLine(450, 1000, 4700),
+  PtLine(500, 1000, 4700)
 };
diff --git a/Marlin/src/module/thermistor/thermistor_11.h b/Marlin/src/module/thermistor/thermistor_11.h
index 1b2da4a71a8b..339f11d56b48 100644
--- a/Marlin/src/module/thermistor/thermistor_11.h
+++ b/Marlin/src/module/thermistor/thermistor_11.h
@@ -22,7 +22,7 @@
 #pragma once
 
 // R25 = 100 kOhm, beta25 = 3950 K, 4.7 kOhm pull-up, QU-BD silicone bed QWG-104F-3950 thermistor
-const short temptable_11[][2] PROGMEM = {
+const temp_entry_t temptable_11[] PROGMEM = {
   { OV(   1), 938 },
   { OV(  31), 314 },
   { OV(  41), 290 },
diff --git a/Marlin/src/module/thermistor/thermistor_110.h b/Marlin/src/module/thermistor/thermistor_110.h
index fe8f4fbb8070..32ee08580769 100644
--- a/Marlin/src/module/thermistor/thermistor_110.h
+++ b/Marlin/src/module/thermistor/thermistor_110.h
@@ -22,7 +22,7 @@
 #pragma once
 
 // Pt100 with 1k0 pullup
-const short temptable_110[][2] PROGMEM = {
+const temp_entry_t temptable_110[] PROGMEM = {
   // only a few values are needed as the curve is very flat
   PtLine(  0, 100, 1000),
   PtLine( 50, 100, 1000),
diff --git a/Marlin/src/module/thermistor/thermistor_12.h b/Marlin/src/module/thermistor/thermistor_12.h
index f9e994a959c2..3b8cda870e74 100644
--- a/Marlin/src/module/thermistor/thermistor_12.h
+++ b/Marlin/src/module/thermistor/thermistor_12.h
@@ -22,7 +22,7 @@
 #pragma once
 
 // R25 = 100 kOhm, beta25 = 4700 K, 4.7 kOhm pull-up, (personal calibration for Makibox hot bed)
-const short temptable_12[][2] PROGMEM = {
+const temp_entry_t temptable_12[] PROGMEM = {
   { OV(  35), 180 }, // top rating 180C
   { OV( 211), 140 },
   { OV( 233), 135 },
diff --git a/Marlin/src/module/thermistor/thermistor_13.h b/Marlin/src/module/thermistor/thermistor_13.h
index 44c5243c1fe2..9bf3e02081d8 100644
--- a/Marlin/src/module/thermistor/thermistor_13.h
+++ b/Marlin/src/module/thermistor/thermistor_13.h
@@ -22,7 +22,7 @@
 #pragma once
 
 // R25 = 100 kOhm, beta25 = 4100 K, 4.7 kOhm pull-up, Hisens thermistor
-const short temptable_13[][2] PROGMEM = {
+const temp_entry_t temptable_13[] PROGMEM = {
   { OV( 20.04), 300 },
   { OV( 23.19), 290 },
   { OV( 26.71), 280 },
diff --git a/Marlin/src/module/thermistor/thermistor_147.h b/Marlin/src/module/thermistor/thermistor_147.h
index 8fead6c42991..61a82affa74b 100644
--- a/Marlin/src/module/thermistor/thermistor_147.h
+++ b/Marlin/src/module/thermistor/thermistor_147.h
@@ -22,7 +22,7 @@
 #pragma once
 
 // Pt100 with 4k7 pullup
-const short temptable_147[][2] PROGMEM = {
+const temp_entry_t temptable_147[] PROGMEM = {
   // only a few values are needed as the curve is very flat
   PtLine(  0, 100, 4700),
   PtLine( 50, 100, 4700),
diff --git a/Marlin/src/module/thermistor/thermistor_15.h b/Marlin/src/module/thermistor/thermistor_15.h
index 85602abb3a9c..04d022101080 100644
--- a/Marlin/src/module/thermistor/thermistor_15.h
+++ b/Marlin/src/module/thermistor/thermistor_15.h
@@ -22,7 +22,7 @@
 #pragma once
 
  // 100k bed thermistor in JGAurora A5. Calibrated by Sam Pinches 21st Jan 2018 using cheap k-type thermocouple inserted into heater block, using TM-902C meter.
-const short temptable_15[][2] PROGMEM = {
+const temp_entry_t temptable_15[] PROGMEM = {
   { OV(  31), 275 },
   { OV(  33), 270 },
   { OV(  35), 260 },
diff --git a/Marlin/src/module/thermistor/thermistor_18.h b/Marlin/src/module/thermistor/thermistor_18.h
index f6a3edec4974..0f12d6996ae4 100644
--- a/Marlin/src/module/thermistor/thermistor_18.h
+++ b/Marlin/src/module/thermistor/thermistor_18.h
@@ -22,7 +22,7 @@
 #pragma once
 
 // ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - version (measured/tested/approved)
-const short temptable_18[][2] PROGMEM = {
+const temp_entry_t temptable_18[] PROGMEM = {
   { OV(   1), 713 },
   { OV(  17), 284 },
   { OV(  20), 275 },
diff --git a/Marlin/src/module/thermistor/thermistor_2.h b/Marlin/src/module/thermistor/thermistor_2.h
index f3fe470603c9..ec296ec670af 100644
--- a/Marlin/src/module/thermistor/thermistor_2.h
+++ b/Marlin/src/module/thermistor/thermistor_2.h
@@ -26,7 +26,7 @@
 // Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
 // Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
 //
-const short temptable_2[][2] PROGMEM = {
+const temp_entry_t temptable_2[] PROGMEM = {
   { OV(   1), 848 },
   { OV(  30), 300 }, // top rating 300C
   { OV(  34), 290 },
diff --git a/Marlin/src/module/thermistor/thermistor_20.h b/Marlin/src/module/thermistor/thermistor_20.h
index 49b212da50b0..a2d3c7a61833 100644
--- a/Marlin/src/module/thermistor/thermistor_20.h
+++ b/Marlin/src/module/thermistor/thermistor_20.h
@@ -21,10 +21,10 @@
  */
 #pragma once
 
-#define REVERSE_TEMP_SENSOR_RANGE
+#define REVERSE_TEMP_SENSOR_RANGE_20 1
 
 // Pt100 with INA826 amp on Ultimaker v2.0 electronics
-const short temptable_20[][2] PROGMEM = {
+const temp_entry_t temptable_20[] PROGMEM = {
   { OV(  0),    0 },
   { OV(227),    1 },
   { OV(236),   10 },
diff --git a/Marlin/src/module/thermistor/thermistor_201.h b/Marlin/src/module/thermistor/thermistor_201.h
index d92f95756175..1ddd259172de 100644
--- a/Marlin/src/module/thermistor/thermistor_201.h
+++ b/Marlin/src/module/thermistor/thermistor_201.h
@@ -21,10 +21,10 @@
  */
 #pragma once
 
-#define REVERSE_TEMP_SENSOR_RANGE
+#define REVERSE_TEMP_SENSOR_RANGE_201 1
 
 // Pt100 with LMV324 amp on Overlord v1.1 electronics
-const short temptable_201[][2] PROGMEM = {
+const temp_entry_t temptable_201[] PROGMEM = {
   { OV(   0),   0 },
   { OV(   8),   1 },
   { OV(  23),   6 },
diff --git a/Marlin/src/module/thermistor/thermistor_202.h b/Marlin/src/module/thermistor/thermistor_202.h
index 9da3d45f454c..c5229607ae33 100644
--- a/Marlin/src/module/thermistor/thermistor_202.h
+++ b/Marlin/src/module/thermistor/thermistor_202.h
@@ -3,7 +3,7 @@
 // Temptable sent from dealer technologyoutlet.co.uk
 //
 
-const short temptable_202[][2] PROGMEM = {
+const temp_entry_t temptable_202[] PROGMEM = {
   { OV(   1), 864 },
   { OV(  35), 300 },
   { OV(  38), 295 },
diff --git a/Marlin/src/module/thermistor/thermistor_21.h b/Marlin/src/module/thermistor/thermistor_21.h
index 655f56685dac..144692cd12bd 100644
--- a/Marlin/src/module/thermistor/thermistor_21.h
+++ b/Marlin/src/module/thermistor/thermistor_21.h
@@ -21,13 +21,13 @@
  */
 #pragma once
 
-#define REVERSE_TEMP_SENSOR_RANGE
+#define REVERSE_TEMP_SENSOR_RANGE_21 1
 
 #undef OV_SCALE
 #define OV_SCALE(N) (float((N) * 5) / 3.3f)
 
 // Pt100 with INA826 amp with 3.3v excitation based on "Pt100 with INA826 amp on Ultimaker v2.0 electronics"
-const short temptable_21[][2] PROGMEM = {
+const temp_entry_t temptable_21[] PROGMEM = {
   { OV(  0),    0 },
   { OV(227),    1 },
   { OV(236),   10 },
diff --git a/Marlin/src/module/thermistor/thermistor_22.h b/Marlin/src/module/thermistor/thermistor_22.h
index e9b6acbb1e34..dd4d9d9131c8 100644
--- a/Marlin/src/module/thermistor/thermistor_22.h
+++ b/Marlin/src/module/thermistor/thermistor_22.h
@@ -21,7 +21,7 @@
  */
 
 // 100k hotend thermistor with 4.7k pull up to 3.3v and 220R to analog input as in GTM32 Pro vB
-const short temptable_22[][2] PROGMEM = {
+const temp_entry_t temptable_22[] PROGMEM = {
   { OV(   1), 352 },
   { OV(   6), 341 },
   { OV(  11), 330 },
diff --git a/Marlin/src/module/thermistor/thermistor_23.h b/Marlin/src/module/thermistor/thermistor_23.h
index 13918c5893cf..eb156f4358de 100644
--- a/Marlin/src/module/thermistor/thermistor_23.h
+++ b/Marlin/src/module/thermistor/thermistor_23.h
@@ -21,7 +21,7 @@
  */
 
 // 100k hotbed thermistor with 4.7k pull up to 3.3v and 220R to analog input as in GTM32 Pro vB
-const short temptable_23[][2] PROGMEM = {
+const temp_entry_t temptable_23[] PROGMEM = {
   { OV(   1), 938 },
   { OV(  11), 423 },
   { OV(  21), 351 },
diff --git a/Marlin/src/module/thermistor/thermistor_3.h b/Marlin/src/module/thermistor/thermistor_3.h
index e37c2ace7b8d..1b44218d556d 100644
--- a/Marlin/src/module/thermistor/thermistor_3.h
+++ b/Marlin/src/module/thermistor/thermistor_3.h
@@ -22,7 +22,7 @@
 #pragma once
 
 // R25 = 100 kOhm, beta25 = 4120 K, 4.7 kOhm pull-up, mendel-parts
-const short temptable_3[][2] PROGMEM = {
+const temp_entry_t temptable_3[] PROGMEM = {
   { OV(   1), 864 },
   { OV(  21), 300 },
   { OV(  25), 290 },
diff --git a/Marlin/src/module/thermistor/thermistor_331.h b/Marlin/src/module/thermistor/thermistor_331.h
index 434492d7e78c..b8d4959a3be0 100644
--- a/Marlin/src/module/thermistor/thermistor_331.h
+++ b/Marlin/src/module/thermistor/thermistor_331.h
@@ -24,7 +24,7 @@
 #define OVM(V) OV((V)*(0.327/0.5))
 
 // R25 = 100 kOhm, beta25 = 4092 K, 4.7 kOhm pull-up, bed thermistor
-const short temptable_331[][2] PROGMEM = {
+const temp_entry_t temptable_331[] PROGMEM = {
   { OVM(  23), 300 },
   { OVM(  25), 295 },
   { OVM(  27), 290 },
diff --git a/Marlin/src/module/thermistor/thermistor_332.h b/Marlin/src/module/thermistor/thermistor_332.h
index 3112751b95e4..21c82ca12ebf 100644
--- a/Marlin/src/module/thermistor/thermistor_332.h
+++ b/Marlin/src/module/thermistor/thermistor_332.h
@@ -24,7 +24,7 @@
 #define OVM(V) OV((V)*(0.327/0.327))
 
 // R25 = 100 kOhm, beta25 = 4092 K, 4.7 kOhm pull-up, bed thermistor
-const short temptable_332[][2] PROGMEM = {
+const temp_entry_t temptable_332[] PROGMEM = {
   { OVM( 268), 150 },
   { OVM( 293), 145 },
   { OVM( 320), 141 },
diff --git a/Marlin/src/module/thermistor/thermistor_4.h b/Marlin/src/module/thermistor/thermistor_4.h
index 00e0d9ed9755..3cc6da9f25af 100644
--- a/Marlin/src/module/thermistor/thermistor_4.h
+++ b/Marlin/src/module/thermistor/thermistor_4.h
@@ -22,7 +22,7 @@
 #pragma once
 
 // R25 = 10 kOhm, beta25 = 3950 K, 4.7 kOhm pull-up, Generic 10k thermistor
-const short temptable_4[][2] PROGMEM = {
+const temp_entry_t temptable_4[] PROGMEM = {
   { OV(   1), 430 },
   { OV(  54), 137 },
   { OV( 107), 107 },
diff --git a/Marlin/src/module/thermistor/thermistor_5.h b/Marlin/src/module/thermistor/thermistor_5.h
index 8f414de15e8f..f1a04d2ed206 100644
--- a/Marlin/src/module/thermistor/thermistor_5.h
+++ b/Marlin/src/module/thermistor/thermistor_5.h
@@ -26,7 +26,7 @@
 // ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan)
 // Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
 // Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
-const short temptable_5[][2] PROGMEM = {
+const temp_entry_t temptable_5[] PROGMEM = {
   { OV(   1), 713 },
   { OV(  17), 300 }, // top rating 300C
   { OV(  20), 290 },
diff --git a/Marlin/src/module/thermistor/thermistor_501.h b/Marlin/src/module/thermistor/thermistor_501.h
index 3db433644edd..a1ef6e53cbd0 100644
--- a/Marlin/src/module/thermistor/thermistor_501.h
+++ b/Marlin/src/module/thermistor/thermistor_501.h
@@ -22,7 +22,7 @@
 #pragma once
 
 // 100k Zonestar thermistor. Adjusted By Hally
-const short temptable_501[][2] PROGMEM = {
+const temp_entry_t temptable_501[] PROGMEM = {
    { OV(   1), 713 },
    { OV(  14), 300 }, // Top rating 300C
    { OV(  16), 290 },
diff --git a/Marlin/src/module/thermistor/thermistor_502.h b/Marlin/src/module/thermistor/thermistor_502.h
index 1a4019ed5c28..b414e562e6f5 100644
--- a/Marlin/src/module/thermistor/thermistor_502.h
+++ b/Marlin/src/module/thermistor/thermistor_502.h
@@ -23,7 +23,7 @@
 
 // Unknown thermistor for the Zonestar P802M hot bed. Adjusted By Nerseth
 // These were the shipped settings from Zonestar in original firmware: P802M_8_Repetier_V1.6_Zonestar.zip
-const short temptable_502[][2] PROGMEM = {
+const temp_entry_t temptable_502[] PROGMEM = {
    { OV(  56.0 / 4), 300 },
    { OV( 187.0 / 4), 250 },
    { OV( 615.0 / 4), 190 },
diff --git a/Marlin/src/module/thermistor/thermistor_51.h b/Marlin/src/module/thermistor/thermistor_51.h
index f314777a5285..092bcb640814 100644
--- a/Marlin/src/module/thermistor/thermistor_51.h
+++ b/Marlin/src/module/thermistor/thermistor_51.h
@@ -26,7 +26,7 @@
 // Verified by linagee.
 // Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
 // Advantage: Twice the resolution and better linearity from 150C to 200C
-const short temptable_51[][2] PROGMEM = {
+const temp_entry_t temptable_51[] PROGMEM = {
   { OV(   1), 350 },
   { OV( 190), 250 }, // top rating 250C
   { OV( 203), 245 },
diff --git a/Marlin/src/module/thermistor/thermistor_512.h b/Marlin/src/module/thermistor/thermistor_512.h
index 5528e56b9763..ab59c585163a 100644
--- a/Marlin/src/module/thermistor/thermistor_512.h
+++ b/Marlin/src/module/thermistor/thermistor_512.h
@@ -22,7 +22,7 @@
 
 // 100k thermistor supplied with RPW-Ultra hotend, 4.7k pullup
 
-const short temptable_512[][2] PROGMEM = {
+const temp_entry_t temptable_512[] PROGMEM = {
   { OV(26),  300 },
   { OV(28),  295 },
   { OV(30),  290 },
diff --git a/Marlin/src/module/thermistor/thermistor_52.h b/Marlin/src/module/thermistor/thermistor_52.h
index 9a54ef4b6f66..031b094d8909 100644
--- a/Marlin/src/module/thermistor/thermistor_52.h
+++ b/Marlin/src/module/thermistor/thermistor_52.h
@@ -26,7 +26,7 @@
 // Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
 // Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
 // Advantage: More resolution and better linearity from 150C to 200C
-const short temptable_52[][2] PROGMEM = {
+const temp_entry_t temptable_52[] PROGMEM = {
   { OV(   1), 500 },
   { OV( 125), 300 }, // top rating 300C
   { OV( 142), 290 },
diff --git a/Marlin/src/module/thermistor/thermistor_55.h b/Marlin/src/module/thermistor/thermistor_55.h
index ead481e8655a..e137f174c773 100644
--- a/Marlin/src/module/thermistor/thermistor_55.h
+++ b/Marlin/src/module/thermistor/thermistor_55.h
@@ -26,7 +26,7 @@
 // Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
 // Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
 // Advantage: More resolution and better linearity from 150C to 200C
-const short temptable_55[][2] PROGMEM = {
+const temp_entry_t temptable_55[] PROGMEM = {
   { OV(   1), 500 },
   { OV(  76), 300 },
   { OV(  87), 290 },
diff --git a/Marlin/src/module/thermistor/thermistor_6.h b/Marlin/src/module/thermistor/thermistor_6.h
index f84c64413c1f..35aeeabd77e5 100644
--- a/Marlin/src/module/thermistor/thermistor_6.h
+++ b/Marlin/src/module/thermistor/thermistor_6.h
@@ -22,7 +22,7 @@
 #pragma once
 
 // R25 = 100 kOhm, beta25 = 4092 K, 8.2 kOhm pull-up, 100k Epcos (?) thermistor
-const short temptable_6[][2] PROGMEM = {
+const temp_entry_t temptable_6[] PROGMEM = {
   { OV(   1), 350 },
   { OV(  28), 250 }, // top rating 250C
   { OV(  31), 245 },
diff --git a/Marlin/src/module/thermistor/thermistor_60.h b/Marlin/src/module/thermistor/thermistor_60.h
index 167e0edcf88b..3f43740b5e75 100644
--- a/Marlin/src/module/thermistor/thermistor_60.h
+++ b/Marlin/src/module/thermistor/thermistor_60.h
@@ -31,7 +31,7 @@
 // beta: 3950
 // min adc: 1 at 0.0048828125 V
 // max adc: 1023 at 4.9951171875 V
-const short temptable_60[][2] PROGMEM = {
+const temp_entry_t temptable_60[] PROGMEM = {
   { OV(  51), 272 },
   { OV(  61), 258 },
   { OV(  71), 247 },
diff --git a/Marlin/src/module/thermistor/thermistor_61.h b/Marlin/src/module/thermistor/thermistor_61.h
index 5f8171a1d4b6..837ee3781a85 100644
--- a/Marlin/src/module/thermistor/thermistor_61.h
+++ b/Marlin/src/module/thermistor/thermistor_61.h
@@ -30,7 +30,7 @@
 // Resistance Tolerance     + / -1%
 // B Value             3950K at 25/50 deg. C
 // B Value Tolerance         + / - 1%
-const short temptable_61[][2] PROGMEM = {
+const temp_entry_t temptable_61[] PROGMEM = {
   { OV(   2.00), 420 }, // Guestimate to ensure we dont lose a reading and drop temps to -50 when over
   { OV(  12.07), 350 },
   { OV(  12.79), 345 },
diff --git a/Marlin/src/module/thermistor/thermistor_66.h b/Marlin/src/module/thermistor/thermistor_66.h
index 97f082348657..0ab45d64d158 100644
--- a/Marlin/src/module/thermistor/thermistor_66.h
+++ b/Marlin/src/module/thermistor/thermistor_66.h
@@ -22,7 +22,7 @@
 #pragma once
 
 // R25 = 2.5 MOhm, beta25 = 4500 K, 4.7 kOhm pull-up, DyzeDesign 500 °C Thermistor
-const short temptable_66[][2] PROGMEM = {
+const temp_entry_t temptable_66[] PROGMEM = {
   { OV(  17.5), 850 },
   { OV(  17.9), 500 },
   { OV(  21.7), 480 },
diff --git a/Marlin/src/module/thermistor/thermistor_67.h b/Marlin/src/module/thermistor/thermistor_67.h
index 5af203c8abd2..11fdca856835 100644
--- a/Marlin/src/module/thermistor/thermistor_67.h
+++ b/Marlin/src/module/thermistor/thermistor_67.h
@@ -22,7 +22,7 @@
 #pragma once
 
 // R25 = 500 KOhm, beta25 = 3800 K, 4.7 kOhm pull-up, SliceEngineering 450 °C Thermistor
-const short temptable_67[][2] PROGMEM = {
+const temp_entry_t temptable_67[] PROGMEM = {
   { OV(  22 ),  500 },
   { OV(  23 ),  490 },
   { OV(  25 ),  480 },
diff --git a/Marlin/src/module/thermistor/thermistor_7.h b/Marlin/src/module/thermistor/thermistor_7.h
index e791d0c33304..1e6ab1d34ae3 100644
--- a/Marlin/src/module/thermistor/thermistor_7.h
+++ b/Marlin/src/module/thermistor/thermistor_7.h
@@ -22,7 +22,7 @@
 #pragma once
 
 // R25 = 100 kOhm, beta25 = 3974 K, 4.7 kOhm pull-up, Honeywell 135-104LAG-J01
-const short temptable_7[][2] PROGMEM = {
+const temp_entry_t temptable_7[] PROGMEM = {
   { OV(   1), 941 },
   { OV(  19), 362 },
   { OV(  37), 299 }, // top rating 300C
diff --git a/Marlin/src/module/thermistor/thermistor_70.h b/Marlin/src/module/thermistor/thermistor_70.h
index b49804106970..d81424f9b611 100644
--- a/Marlin/src/module/thermistor/thermistor_70.h
+++ b/Marlin/src/module/thermistor/thermistor_70.h
@@ -26,7 +26,7 @@
 // ANENG AN8009 DMM with a K-type probe used for measurements.
 
 // R25 = 100 kOhm, beta25 = 4100 K, 4.7 kOhm pull-up, bqh2 stock thermistor
-const short temptable_70[][2] PROGMEM = {
+const temp_entry_t temptable_70[] PROGMEM = {
   { OV(  18), 270 },
   { OV(  27), 248 },
   { OV(  34), 234 },
diff --git a/Marlin/src/module/thermistor/thermistor_71.h b/Marlin/src/module/thermistor/thermistor_71.h
index c3a9193b79bb..c7bab2a0bcac 100644
--- a/Marlin/src/module/thermistor/thermistor_71.h
+++ b/Marlin/src/module/thermistor/thermistor_71.h
@@ -27,7 +27,7 @@
 // Beta = 3974
 // R1 = 0 Ohm
 // R2 = 4700 Ohm
-const short temptable_71[][2] PROGMEM = {
+const temp_entry_t temptable_71[] PROGMEM = {
   { OV(  35), 300 },
   { OV(  51), 269 },
   { OV(  59), 258 },
diff --git a/Marlin/src/module/thermistor/thermistor_75.h b/Marlin/src/module/thermistor/thermistor_75.h
index 3a3cdc636409..1df64cc420ea 100644
--- a/Marlin/src/module/thermistor/thermistor_75.h
+++ b/Marlin/src/module/thermistor/thermistor_75.h
@@ -34,7 +34,7 @@
 
 //#define HIGH_TEMP_RANGE_75
 
-const short temptable_75[][2] PROGMEM = { // Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
+const temp_entry_t temptable_75[] PROGMEM = { // Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
   { OV(111.06), 200 }, // v=0.542 r=571.747 res=0.501 degC/count
 
   #ifdef HIGH_TEMP_RANGE_75
diff --git a/Marlin/src/module/thermistor/thermistor_8.h b/Marlin/src/module/thermistor/thermistor_8.h
index f6e407a730da..ec97df613387 100644
--- a/Marlin/src/module/thermistor/thermistor_8.h
+++ b/Marlin/src/module/thermistor/thermistor_8.h
@@ -22,7 +22,7 @@
 #pragma once
 
 // R25 = 100 kOhm, beta25 = 3950 K, 10 kOhm pull-up, NTCS0603E3104FHT
-const short temptable_8[][2] PROGMEM = {
+const temp_entry_t temptable_8[] PROGMEM = {
   { OV(   1), 704 },
   { OV(  54), 216 },
   { OV( 107), 175 },
diff --git a/Marlin/src/module/thermistor/thermistor_9.h b/Marlin/src/module/thermistor/thermistor_9.h
index 5023fbe1d01a..e194df57c1ff 100644
--- a/Marlin/src/module/thermistor/thermistor_9.h
+++ b/Marlin/src/module/thermistor/thermistor_9.h
@@ -22,7 +22,7 @@
 #pragma once
 
 // R25 = 100 kOhm, beta25 = 3960 K, 4.7 kOhm pull-up, GE Sensing AL03006-58.2K-97-G1
-const short temptable_9[][2] PROGMEM = {
+const temp_entry_t temptable_9[] PROGMEM = {
   { OV(   1), 936 },
   { OV(  36), 300 },
   { OV(  71), 246 },
diff --git a/Marlin/src/module/thermistor/thermistor_99.h b/Marlin/src/module/thermistor/thermistor_99.h
index 045a42b73804..b6d6bbac9d02 100644
--- a/Marlin/src/module/thermistor/thermistor_99.h
+++ b/Marlin/src/module/thermistor/thermistor_99.h
@@ -24,7 +24,7 @@
 
 // 100k bed thermistor with a 10K pull-up resistor - made by $ buildroot/share/scripts/createTemperatureLookupMarlin.py --rp=10000
 
-const short temptable_99[][2] PROGMEM = {
+const temp_entry_t temptable_99[] PROGMEM = {
   { OV(  5.81), 350 }, // v=0.028   r=    57.081  res=13.433 degC/count
   { OV(  6.54), 340 }, // v=0.032   r=    64.248  res=11.711 degC/count
   { OV(  7.38), 330 }, // v=0.036   r=    72.588  res=10.161 degC/count
diff --git a/Marlin/src/module/thermistor/thermistor_998.h b/Marlin/src/module/thermistor/thermistor_998.h
index 6f631d4b9abe..2802121c5040 100644
--- a/Marlin/src/module/thermistor/thermistor_998.h
+++ b/Marlin/src/module/thermistor/thermistor_998.h
@@ -27,7 +27,7 @@
   #define DUMMY_THERMISTOR_998_VALUE 25
 #endif
 
-const short temptable_998[][2] PROGMEM = {
+const temp_entry_t temptable_998[] PROGMEM = {
   { OV(   1), DUMMY_THERMISTOR_998_VALUE },
   { OV(1023), DUMMY_THERMISTOR_998_VALUE }
 };
diff --git a/Marlin/src/module/thermistor/thermistor_999.h b/Marlin/src/module/thermistor/thermistor_999.h
index d750d5597c38..cf6ebb3ae1d5 100644
--- a/Marlin/src/module/thermistor/thermistor_999.h
+++ b/Marlin/src/module/thermistor/thermistor_999.h
@@ -27,7 +27,7 @@
   #define DUMMY_THERMISTOR_999_VALUE 25
 #endif
 
-const short temptable_999[][2] PROGMEM = {
+const temp_entry_t temptable_999[] PROGMEM = {
   { OV(   1), DUMMY_THERMISTOR_999_VALUE },
   { OV(1023), DUMMY_THERMISTOR_999_VALUE }
 };
diff --git a/Marlin/src/module/thermistor/thermistors.h b/Marlin/src/module/thermistor/thermistors.h
index 04b091b2a093..afb3148dfd9e 100644
--- a/Marlin/src/module/thermistor/thermistors.h
+++ b/Marlin/src/module/thermistor/thermistors.h
@@ -42,6 +42,8 @@
 
 #define ANY_THERMISTOR_IS(n) (THERMISTOR_HEATER_0 == n || THERMISTOR_HEATER_1 == n || THERMISTOR_HEATER_2 == n || THERMISTOR_HEATER_3 == n || THERMISTOR_HEATER_4 == n || THERMISTOR_HEATER_5 == n || THERMISTOR_HEATER_6 == n || THERMISTOR_HEATER_7 == n || THERMISTORBED == n || THERMISTORCHAMBER == n || THERMISTORPROBE == n)
 
+typedef struct { int16_t value, celsius; } temp_entry_t;
+
 // Pt1000 and Pt100 handling
 //
 // Rt=R0*(1+a*T+b*T*T) [for T>0]
@@ -185,12 +187,13 @@
   #include "thermistor_999.h"
 #endif
 #if ANY_THERMISTOR_IS(1000) // Custom
-  const short temptable_1000[][2] PROGMEM = { { 0, 0 } };
+  const temp_entry_t temptable_1000[] PROGMEM = { { 0, 0 } };
 #endif
 
 #define _TT_NAME(_N) temptable_ ## _N
 #define TT_NAME(_N) _TT_NAME(_N)
 
+
 #if THERMISTOR_HEATER_0
   #define HEATER_0_TEMPTABLE TT_NAME(THERMISTOR_HEATER_0)
   #define HEATER_0_TEMPTABLE_LEN COUNT(HEATER_0_TEMPTABLE)
@@ -288,9 +291,12 @@
 #else
   #define CHAMBER_TEMPTABLE_LEN 0
 #endif
+
 #ifdef THERMISTORPROBE
   #define PROBE_TEMPTABLE TT_NAME(THERMISTORPROBE)
   #define PROBE_TEMPTABLE_LEN COUNT(PROBE_TEMPTABLE)
+#elif defined(HEATER_PROBE_USES_THERMISTOR)
+  #error "No probe thermistor table specified"
 #else
   #define PROBE_TEMPTABLE_LEN 0
 #endif
@@ -300,7 +306,7 @@ static_assert(
      HEATER_0_TEMPTABLE_LEN < 256 && HEATER_1_TEMPTABLE_LEN < 256
   && HEATER_2_TEMPTABLE_LEN < 256 && HEATER_3_TEMPTABLE_LEN < 256
   && HEATER_4_TEMPTABLE_LEN < 256 && HEATER_5_TEMPTABLE_LEN < 256
-  && HEATER_6_TEMPTABLE_LEN < 258 && HEATER_7_TEMPTABLE_LEN < 258
+  && HEATER_6_TEMPTABLE_LEN < 256 && HEATER_7_TEMPTABLE_LEN < 256
   &&      BED_TEMPTABLE_LEN < 256 &&  CHAMBER_TEMPTABLE_LEN < 256
   &&    PROBE_TEMPTABLE_LEN < 256,
   "Temperature conversion tables over 255 entries need special consideration."
@@ -309,8 +315,85 @@ static_assert(
 // Set the high and low raw values for the heaters
 // For thermistors the highest temperature results in the lowest ADC value
 // For thermocouples the highest temperature results in the highest ADC value
+
+#define _TT_REV(N) REVERSE_TEMP_SENSOR_RANGE_##N
+#define TT_REV(N) _TT_REV(N)
+
+#ifdef HEATER_0_TEMPTABLE
+  #if TT_REV(THERMISTOR_HEATER_0)
+    #define HEATER_0_SENSOR_MINTEMP_IND 0
+    #define HEATER_0_SENSOR_MAXTEMP_IND HEATER_0_TEMPTABLE_LEN - 1
+  #else
+    #define HEATER_0_SENSOR_MINTEMP_IND HEATER_0_TEMPTABLE_LEN - 1
+    #define HEATER_0_SENSOR_MAXTEMP_IND 0
+  #endif
+#endif
+#ifdef HEATER_1_TEMPTABLE
+  #if TT_REV(THERMISTOR_HEATER_1)
+    #define HEATER_1_SENSOR_MINTEMP_IND 0
+    #define HEATER_1_SENSOR_MAXTEMP_IND HEATER_1_TEMPTABLE_LEN - 1
+  #else
+    #define HEATER_1_SENSOR_MINTEMP_IND HEATER_1_TEMPTABLE_LEN - 1
+    #define HEATER_1_SENSOR_MAXTEMP_IND 0
+  #endif
+#endif
+#ifdef HEATER_2_TEMPTABLE
+  #if TT_REV(THERMISTOR_HEATER_2)
+    #define HEATER_2_SENSOR_MINTEMP_IND 0
+    #define HEATER_2_SENSOR_MAXTEMP_IND HEATER_2_TEMPTABLE_LEN - 1
+  #else
+    #define HEATER_2_SENSOR_MINTEMP_IND HEATER_2_TEMPTABLE_LEN - 1
+    #define HEATER_2_SENSOR_MAXTEMP_IND 0
+  #endif
+#endif
+#ifdef HEATER_3_TEMPTABLE
+  #if TT_REV(THERMISTOR_HEATER_3)
+    #define HEATER_3_SENSOR_MINTEMP_IND 0
+    #define HEATER_3_SENSOR_MAXTEMP_IND HEATER_3_TEMPTABLE_LEN - 1
+  #else
+    #define HEATER_3_SENSOR_MINTEMP_IND HEATER_3_TEMPTABLE_LEN - 1
+    #define HEATER_3_SENSOR_MAXTEMP_IND 0
+  #endif
+#endif
+#ifdef HEATER_4_TEMPTABLE
+  #if TT_REV(THERMISTOR_HEATER_4)
+    #define HEATER_4_SENSOR_MINTEMP_IND 0
+    #define HEATER_4_SENSOR_MAXTEMP_IND HEATER_4_TEMPTABLE_LEN - 1
+  #else
+    #define HEATER_4_SENSOR_MINTEMP_IND HEATER_4_TEMPTABLE_LEN - 1
+    #define HEATER_4_SENSOR_MAXTEMP_IND 0
+  #endif
+#endif
+#ifdef HEATER_5_TEMPTABLE
+  #if TT_REV(THERMISTOR_HEATER_5)
+    #define HEATER_5_SENSOR_MINTEMP_IND 0
+    #define HEATER_5_SENSOR_MAXTEMP_IND HEATER_5_TEMPTABLE_LEN - 1
+  #else
+    #define HEATER_5_SENSOR_MINTEMP_IND HEATER_5_TEMPTABLE_LEN - 1
+    #define HEATER_5_SENSOR_MAXTEMP_IND 0
+  #endif
+#endif
+#ifdef HEATER_6_TEMPTABLE
+  #if TT_REV(THERMISTOR_HEATER_6)
+    #define HEATER_6_SENSOR_MINTEMP_IND 0
+    #define HEATER_6_SENSOR_MAXTEMP_IND HEATER_6_TEMPTABLE_LEN - 1
+  #else
+    #define HEATER_6_SENSOR_MINTEMP_IND HEATER_6_TEMPTABLE_LEN - 1
+    #define HEATER_6_SENSOR_MAXTEMP_IND 0
+  #endif
+#endif
+#ifdef HEATER_7_TEMPTABLE
+  #if TT_REV(THERMISTOR_HEATER_7)
+    #define HEATER_7_SENSOR_MINTEMP_IND 0
+    #define HEATER_7_SENSOR_MAXTEMP_IND HEATER_7_TEMPTABLE_LEN - 1
+  #else
+    #define HEATER_7_SENSOR_MINTEMP_IND HEATER_7_TEMPTABLE_LEN - 1
+    #define HEATER_7_SENSOR_MAXTEMP_IND 0
+  #endif
+#endif
+
 #ifndef HEATER_0_RAW_HI_TEMP
-  #if defined(REVERSE_TEMP_SENSOR_RANGE) || !defined(HEATER_0_USES_THERMISTOR)
+  #if TT_REV(THERMISTOR_HEATER_0) || !defined(HEATER_0_USES_THERMISTOR)
     #define HEATER_0_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE
     #define HEATER_0_RAW_LO_TEMP 0
   #else
@@ -319,7 +402,7 @@ static_assert(
   #endif
 #endif
 #ifndef HEATER_1_RAW_HI_TEMP
-  #if defined(REVERSE_TEMP_SENSOR_RANGE) || !defined(HEATER_1_USES_THERMISTOR)
+  #if TT_REV(THERMISTOR_HEATER_1) || !defined(HEATER_1_USES_THERMISTOR)
     #define HEATER_1_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE
     #define HEATER_1_RAW_LO_TEMP 0
   #else
@@ -328,7 +411,7 @@ static_assert(
   #endif
 #endif
 #ifndef HEATER_2_RAW_HI_TEMP
-  #if defined(REVERSE_TEMP_SENSOR_RANGE) || !defined(HEATER_2_USES_THERMISTOR)
+  #if TT_REV(THERMISTOR_HEATER_2) || !defined(HEATER_2_USES_THERMISTOR)
     #define HEATER_2_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE
     #define HEATER_2_RAW_LO_TEMP 0
   #else
@@ -337,7 +420,7 @@ static_assert(
   #endif
 #endif
 #ifndef HEATER_3_RAW_HI_TEMP
-  #if defined(REVERSE_TEMP_SENSOR_RANGE) || !defined(HEATER_3_USES_THERMISTOR)
+  #if TT_REV(THERMISTOR_HEATER_3) || !defined(HEATER_3_USES_THERMISTOR)
     #define HEATER_3_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE
     #define HEATER_3_RAW_LO_TEMP 0
   #else
@@ -346,7 +429,7 @@ static_assert(
   #endif
 #endif
 #ifndef HEATER_4_RAW_HI_TEMP
-  #if defined(REVERSE_TEMP_SENSOR_RANGE) || !defined(HEATER_4_USES_THERMISTOR)
+  #if TT_REV(THERMISTOR_HEATER_4) || !defined(HEATER_4_USES_THERMISTOR)
     #define HEATER_4_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE
     #define HEATER_4_RAW_LO_TEMP 0
   #else
@@ -355,7 +438,7 @@ static_assert(
   #endif
 #endif
 #ifndef HEATER_5_RAW_HI_TEMP
-  #if defined(REVERSE_TEMP_SENSOR_RANGE) || !defined(HEATER_5_USES_THERMISTOR)
+  #if TT_REV(THERMISTOR_HEATER_5) || !defined(HEATER_5_USES_THERMISTOR)
     #define HEATER_5_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE
     #define HEATER_5_RAW_LO_TEMP 0
   #else
@@ -364,7 +447,7 @@ static_assert(
   #endif
 #endif
 #ifndef HEATER_6_RAW_HI_TEMP
-  #if defined(REVERSE_TEMP_SENSOR_RANGE) || !defined(HEATER_6_USES_THERMISTOR)
+  #if TT_REV(THERMISTOR_HEATER_6) || !defined(HEATER_6_USES_THERMISTOR)
     #define HEATER_6_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE
     #define HEATER_6_RAW_LO_TEMP 0
   #else
@@ -373,7 +456,7 @@ static_assert(
   #endif
 #endif
 #ifndef HEATER_7_RAW_HI_TEMP
-  #if defined(REVERSE_TEMP_SENSOR_RANGE) || !defined(HEATER_7_USES_THERMISTOR)
+  #if TT_REV(THERMISTOR_HEATER_7) || !defined(HEATER_7_USES_THERMISTOR)
     #define HEATER_7_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE
     #define HEATER_7_RAW_LO_TEMP 0
   #else
@@ -382,7 +465,7 @@ static_assert(
   #endif
 #endif
 #ifndef HEATER_BED_RAW_HI_TEMP
-  #if defined(REVERSE_TEMP_SENSOR_RANGE) || !defined(HEATER_BED_USES_THERMISTOR)
+  #if TT_REV(THERMISTORBED) || !defined(HEATER_BED_USES_THERMISTOR)
     #define HEATER_BED_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE
     #define HEATER_BED_RAW_LO_TEMP 0
   #else
@@ -391,7 +474,7 @@ static_assert(
   #endif
 #endif
 #ifndef HEATER_CHAMBER_RAW_HI_TEMP
-  #if defined(REVERSE_TEMP_SENSOR_RANGE) || !defined(HEATER_CHAMBER_USES_THERMISTOR)
+  #if TT_REV(THERMISTORCHAMBER) || !defined(HEATER_CHAMBER_USES_THERMISTOR)
     #define HEATER_CHAMBER_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE
     #define HEATER_CHAMBER_RAW_LO_TEMP 0
   #else
@@ -399,5 +482,15 @@ static_assert(
     #define HEATER_CHAMBER_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE
   #endif
 #endif
+#ifndef HEATER_PROBE_RAW_HI_TEMP
+  #if TT_REV(THERMISTORPROBE) || !defined(HEATER_PROBE_USES_THERMISTOR)
+    #define HEATER_PROBE_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE
+    #define HEATER_PROBE_RAW_LO_TEMP 0
+  #else
+    #define HEATER_PROBE_RAW_HI_TEMP 0
+    #define HEATER_PROBE_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE
+  #endif
+#endif
 
-#undef REVERSE_TEMP_SENSOR_RANGE
+#undef _TT_REV
+#undef TT_REV