Skip to content

Latest commit

 

History

History
67 lines (49 loc) · 2.98 KB

README.md

File metadata and controls

67 lines (49 loc) · 2.98 KB

gematik-epa-postman-collection

This is a Postman-Collection for DiGAs to make requests to the TI-Connector and write into the ePA.

Requests

  • connector.sds: Gets the connector service information. You need the EndpointTLS Location information to make requests to the service you need.
  • GetCards: Gets the smc-b cards that are inserted into the card reader.
  • GetPinStatus: Gets the status of the pin of the card.
  • ReadCardCertificate: Reads the certificate of the card. In the certificate extras is the AUTHOR_IDENTIFIER you need for the configuration.
  • VerifyPin: Triggers the pin verification of the card.
  • GetHomeCommunityID: Gets the home community id of the patient.
  • SaveDocument: Saves a document in the ePA.
  • UpdateDocument: Updates a document in the ePA.

Prerequisites

Connector certificate

In the Postman settings you need to add your PFX file and passphrase for the connector.

Collection variables

From the connector configutation:

  • MANDANT_ID
  • CLIENT_SYSTEM_ID
  • WORKPLACE_ID

From the patient (needed for GetHomeCommunityID, SaveDocument and UpdateDocument):

  • KVNR - The id of the patient you want to write data for: e.g. X110593136

From the ePA configuration (needed for SaveDocument and UpdateDocument):

  • AUTHOR_PERSON_LAST_NAME - Name of the device: e.g. DiGA
  • AUTHOR_PERSON_FIRST_NAME - Name of the software: e.g. sinCephalea
  • AUTHOR_INSTITUTION_ORGANIZATION_NAME - Name of the organization: e.g. Perfood GmbH
  • AUTHOR_IDENTIFIER
    • Format: 9-SMC-B-Testkarte-XXXXXXXXXXXXXXX
    • For XXXXXXXXXXXXXXX you need the last 15 digits are the Iccsn of the card. This number you can get with the GetCards request of the collection.

Good to know

In the Pre-request Scritp of the collection all other needed variables for the requests are set.

  • DOCUMENT_ID: must be in in RFC4122 format e.g. urn:uuid:73343e0f-df8d-4176-9f29-41d96333df7e
  • SUBMISSION_SET_ID & DOCUMENT_ENTRY_ID: must be in OID format
    • SubmissionSet.uniqueId
    • XDSDocumentEntry.uniqueId
    • Under node 2.25, a UUID can be used as an OID component; no registration is required for this.
      • Example JavaScript:
        const uuid = require('uuid');
        
        const oid = `2.25.${BigInt('0x' + uuid.v4().replace(/-/g, '')).toString()}`