forked from plntyk/openwrt-zyxel_keenetic
-
Notifications
You must be signed in to change notification settings - Fork 3
/
0006-ramips-add-ZyXel-Keenetic-GIGA-dts.patch
154 lines (151 loc) · 3.06 KB
/
0006-ramips-add-ZyXel-Keenetic-GIGA-dts.patch
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
From fc4b5ca9db3a96aa09ab0f63a716b8560e9bb068 Mon Sep 17 00:00:00 2001
From: Dirk Neukirchen <dirkneukirchen@web.de>
Date: Thu, 12 Feb 2015 10:11:37 +0100
Subject: [PATCH 06/19] ramips: add ZyXel Keenetic GIGA dts
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
---
target/linux/ramips/dts/KEENETIC_GIGA.dts | 134 ++++++++++++++++++++++++++++++
1 file changed, 134 insertions(+)
create mode 100644 target/linux/ramips/dts/KEENETIC_GIGA.dts
diff --git a/target/linux/ramips/dts/KEENETIC_GIGA.dts b/target/linux/ramips/dts/KEENETIC_GIGA.dts
new file mode 100644
index 0000000..77e6a88
--- /dev/null
+++ b/target/linux/ramips/dts/KEENETIC_GIGA.dts
@@ -0,0 +1,134 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+ compatible = "KEENETIC_GIGA", "ralink,rt3050-soc";
+ model = "ZyXEL Keenetic Giga";
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+
+ bank-width = <2>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+
+ ethernet@10100000 {
+ mtd-mac-address = <&factory 0x4>;
+ };
+
+ esw@10110000 {
+ ralink,portmap = <0x3f>;
+ ralink,fct2 = <0x0002500c>;
+ /* ext phy base addr 31, rx/tx clock skew 0,
+ * turbo mii off, rgmi 3.3v off, port 5 polling off
+ * port5: enabled, gige, full-duplex, rx/tx-flow-control
+ * port6: enabled, gige, full-duplex, rx/tx-flow-control
+ */
+ ralink,fpa2 = <0x1f003fff>;
+ };
+
+ wmac@10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ power {
+ label = "zyxel:green:power";
+ gpios = <&gpio0 9 1>;
+ };
+ wlan {
+ label = "zyxel:green:wlan";
+ gpios = <&gpio0 14 1>;
+ };
+ internet {
+ label = "zyxel:green:internet";
+ gpios = <&gpio0 13 1>;
+ };
+ usb {
+ label = "zyxel:green:usb";
+ gpios = <&gpio0 8 1>;
+ };
+ };
+
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 1>;
+ linux,code = <0x198>;
+ };
+ /* 1-on, 0-off */
+ wifi {
+ label = "wifi";
+ gpios = <&gpio0 12 0>;
+ linux,code = <0xf7>;
+ linux,input-type = <5>; /* EV_SW */
+ };
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 1>;
+ linux,code = <0x211>;
+ };
+ usb_a {
+ label = "usb_a";
+ gpios = <&gpio0 2 1>;
+ linux,code = <0x212>;
+ };
+ usb_b {
+ label = "usb_b";
+ gpios = <&gpio0 1 1>;
+ linux,code = <0x213>;
+ };
+ };
+
+ rtl8366rb {
+ compatible = "rtl8367rb";
+ gpio-sda = <&gpio0 1 0>;
+ gpio-sck = <&gpio0 2 0>;
+ };
+
+ otg@101c0000 {
+ status = "okay";
+ };
+};
--
2.3.0