Skip to content

Latest commit

 

History

History
114 lines (102 loc) · 3.26 KB

LTC-node.md

File metadata and controls

114 lines (102 loc) · 3.26 KB
Raw

Setting up a Litecoin Node for TxStreet

These instructions are meant for DigitalOcean, but you can use the same steps with some modifications to create a node on other cloud providers.

System Requirements

  • 4GB memory
  • 2 CPU cores
  • At least 200GB of storage

Setup

  1. Create the droplet on DigitalOcean
  • Use the same region and datacenter as your other droplets and databases.
  • Ubuntu 22.04.
  • Choose any type of droplet with the system requirements.
  • Click "Add Volume" and set it to at least 200GB, "Automatically Format & Mount", and Ext4.
  • Add your SSH key if you wish.
  • Add the tag 'litecoin'.
  • Click create droplet.
  1. Modify system file limits.
  • SSH into the droplet as the root user.
  • Run the following commands:
echo 'root soft nproc 65535
root soft nofile 65535' | sudo tee -a /etc/security/limits.conf`

echo 'session required pam_limits.so' | sudo tee -a /etc/pam.d/common-session

  • Reboot with reboot
  1. Start syncing litecoind.
  • apt update
  • apt install libdb-dev libdb++-dev -y
  • apt install libfmt-dev -y
  • apt install libboost-all-dev libzmq3-dev libminiupnpc-dev -y
  • apt install curl git build-essential libtool autotools-dev -y
  • apt install automake pkg-config bsdmainutils python3 -y
  • apt install software-properties-common libssl-dev libevent-dev -y
  • git clone https://github.com/litecoin-project/litecoin.git
  • cd litecoin
  • ./autogen.sh
  • ./configure --with-incompatible-bdb
  • make
  • make install
  • mkdir /var/lib/litecoind
  • mkdir /root/.litecoin
  • nano /root/.litecoin/litecoin.conf
  • Paste the following and save: Make sure to change your_drive_directory to the drive directory DigitalOcean created for you. You can ls /mnt to see what it is.
txindex=1
server=1
daemon=1
listen=0
#change this to volume in your droplet
datadir=/mnt/your_drive_directory
disablewallet=1
rpcuser=user
rpcpassword=pass
rpcworkqueue=512
rpcthreads=4
dbcache=2500
rpcbind=0.0.0.0:9332
rpcallowip=0.0.0.0/0

# Enable zeromq for real-time data
zmqpubrawtx=tcp://0.0.0.0:28332
zmqpubrawblock=tcp://0.0.0.0:28332
zmqpubhashtx=tcp://0.0.0.0:28332
zmqpubhashblock=tcp://0.0.0.0:28332
  • nano /etc/systemd/system/litecoind.service
  • Paste the following and save:
[Unit]
Description=Litecoins distributed currency daemon
After=network.target

[Service]
User=root
Group=root

Type=forking
PIDFile=/var/lib/litecoind/litecoind.pid
ExecStart=/usr/local/bin/litecoind -daemon -pid=/var/lib/litecoind/litecoind.pid \
-conf=/root/.litecoin/litecoin.conf

Restart=always
PrivateTmp=true
TimeoutStopSec=60s
TimeoutStartSec=2s
StartLimitInterval=120s
StartLimitBurst=5

[Install]
WantedBy=multi-user.target
  • systemctl daemon-reload
  • service litecoind start
  • Verify the service is running properly with service litecoind status
  • systemctl enable litecoind
  1. Wait for the litecoin blockchain to sync. This may take a while and seem stalled for a bit, but just give it time. Check on the status with litecoin-cli getblockchaininfo
  2. Resize the disk when needed.
  1. Update litecoind when needed.
  • service litecoind stop
  • cd /root/litecoin
  • git pull
  • ./autogen.sh
  • ./configure --with-incompatible-bdb
  • make
  • make install
  • service litecoind start