Model history file output

Here is the information on the model history file output fields.

FV3

• All the possible output fields in physics can be found at: https://github.com/NOAA-EMC/fv3atm/blob/develop/gfsphysics/GFS_layer/GFS_diagnostics.F90
• All the dynamics output fields can be found at: https://github.com/NOAA-EMC/GFDL_atmos_cubed_sphere/blob/dev/emc/driver/fvGFS/fv_nggps_diag.F90

WW3

WW3 output fields can be found at: https://github.com/NOAA-EMC/WW3/blob/develop/model/inp/ww3_shel.inp#L84-L228

MOM6

The available output history will also be generated in your run directory inside the subdirectory "MOM6_OUTPUT" with the name "available_diags.000000" after you run the system. Note the content in the file may differ slightly depending on the model configuration, see MOM6 doc. The current MOM6 output fields can be found at here

CICE6

• History output is controlled by the multiple icefields lists in ice_in. Details for controlling the history output (variable selection and time frequency) are found in the CICE documentation section 3.1.5.1

CMEPS

• CMEPS writes only a restart file unless a med_phases_history_write is included in the run sequence. When a history_write phase is implemented, the frequency is controlled with MED_attributes. The frequency is given by history_n in units of history_option, where history_option can be nsteps, nhours etc. All fields carried by the mediator are written to the mediator history file.