Skip to content

Latest commit

 

History

History
203 lines (155 loc) · 7.47 KB

README.md

File metadata and controls

203 lines (155 loc) · 7.47 KB
Raw

Catalog for Maintainers

Warning

This repository is used by the Unikraft Open-Source Project maintainers.

For the general-purpose Community Catalog, please visit: https://github.com/unikraft/catalog

These are common instructions for applications in the extended maintainers catalog. Each application gets their own directory, used for documenting, setting up, configuring, building, running, testing and debugging the application. Common information, configuration scripts are collected together in other directories such as utils/.

Instructions for Bincompat Apps

The following are common information for examples of applications running in binary compatibility (i.e. bincompat) mode. Instructions assume you are running commands in the application example subdirectory.

Applications running in binary compatibility mode use app-elfloader images to load and run native Linux ELFs (Executable and Linking Format files). The images are generated using library/base/. We call them base images or base kernels.

The images are also stored in the Unikraft registry and can be pulled from there.

Directory Contents

A typical directory for a bincompat app contains:

  • Kraftfile: build / run rules, including pulling the base image
  • Dockerfile: filesystem, including binary and libraries
  • Makefile.docker: used to generate the root filesystem from the Dockerfile rules
  • README.md: specific application instructions, such as starting and testing an application
  • config.yaml: configuration file to generate script files to run the application
  • specific application files, such as configuration files and source code files

Common Setup

The following are required before building and running a bincompat app. In case you have already done them for other bincompat runs, you can skip them:

  1. Install Unikraft's companion command-line toolchain kraft.

  2. Configure kraft to be able to pull contents from GitHub. For this, first generate a GitHub token that has all the repo list items checked. Configure kraft to use the token:

    kraft login -u <username> -t <token> github.com

    In the command above, replace <username> with your GitHub username and <token> with the generated token.

  3. Install Docker following the official instructions. This can be either Docker Engine or Docker Desktop.

  4. Start a BuildKit container to be used by KraftKit to build the filesystem from the Dockerfile. While in the top-level directory of this repository, source the utils/start-buildkit.sh directory:

    source utils/start-buildkit.sh

Basic Build, Run and Use

You build and run the application using KraftKit. Follow the specific instructions in the README.md file in the application directory for specifics on building and running with KraftKit and on using the application.

Scripted Build, Run and Use

For testing, debugging and, generally, for finer-grained control over the build and run process, we generate scripts that wrap KraftKit, Make, QEMU, Firecracker and other commands.

The config.yaml file basic configuration for building and runing the application. It is used to generate the scripts and configuration files required to build and run the application. To generate these files, run the generator script:

../../../utils/bincompat/generate.einitrd.py

The generator script uses the config.yaml file to generates the scripts/ directory and the Makefile file used to to configure, build and run the application with Unikraft.

The scripts/ directory has a structure similar to the one below. Note that the output may differ on your system, depending on the compilers and compiler versions you have installed:

scripts/
|-- build/
|   |-- kraft-fc-x86_64.sh*
|   |-- kraft-qemu-x86_64.sh*
|   |-- make-clang-13-fc-x86_64.sh*
|   |-- make-clang-13-qemu-x86_64.sh*
|   |-- make-clang-15-fc-x86_64.sh*
|   |-- make-clang-15-qemu-x86_64.sh*
|   |-- make-gcc-10-fc-x86_64.sh*
|   |-- make-gcc-10-qemu-x86_64.sh*
|   |-- make-gcc-11-fc-x86_64.sh*
|   |-- make-gcc-11-qemu-x86_64.sh*
|   |-- make-gcc-12-fc-x86_64.sh*
|   |-- make-gcc-12-qemu-x86_64.sh*
|   |-- make-gcc-9-fc-x86_64.sh*
|   `-- make-gcc-9-qemu-x86_64.sh*
|-- defconfig/
|   |-- fc-x86_64
|   `-- qemu-x86_64
|-- kernel/
|-- run/
|   |-- clang-13-fc-x86_64-nofs.json
|   |-- clang-13-fc-x86_64-nofs.sh*
|   |-- clang-13-qemu-x86_64-nofs.sh*
|   |-- clang-15-fc-x86_64-nofs.json
|   |-- clang-15-fc-x86_64-nofs.sh*
|   |-- clang-15-qemu-x86_64-nofs.sh*
|   |-- gcc-10-fc-x86_64-nofs.json
|   |-- gcc-10-fc-x86_64-nofs.sh*
|   |-- gcc-10-qemu-x86_64-nofs.sh*
|   |-- gcc-11-fc-x86_64-nofs.json
|   |-- gcc-11-fc-x86_64-nofs.sh*
|   |-- gcc-11-qemu-x86_64-nofs.sh*
|   |-- gcc-12-fc-x86_64-nofs.json
|   |-- gcc-12-fc-x86_64-nofs.sh*
|   |-- gcc-12-qemu-x86_64-nofs.sh*
|   |-- gcc-9-fc-x86_64-nofs.json
|   |-- gcc-9-fc-x86_64-nofs.sh*
|   |-- gcc-9-qemu-x86_64-nofs.sh*
|   |-- kraft-fc-x86_64-nofs.sh*
|   `-- kraft-qemu-x86_64-nofs.sh*
`-- setup.sh*

The contents of the scripts/ directory are:

  • setup.sh: script to clone and set up required repositories in the workdir/ directory
  • defconfig/: generated configuration files required by the Make-based build; they are generated from Kraftfile
  • build/: generated build scripts; there are different build scripts for using Kraft or Make or for different platforms, architectures and compilers;
  • run/: generated run scripts; there is a corresponding run script for each build output from the build phase; Firecracker builds also generate a corresponding .json file;
  • kernels/: directory where to store generated builds (kernels).

To use the scripts, follow the steps below:

  1. Run the setup.sh script to clone the required support repositories in the workdir/ directory:

    ./scripts/setup.sh

    The workdir/ directory will have contents similar to:

    workdir/
|-- apps/
|   `-- elfloader/
|-- libs/
|   |-- libelf/
|   `-- lwip/
`-- unikraft/

  2. Run a build script from the build/ directory, such as:

    ./scripts/build/make-clang-13-fc-x86_64.sh

    The resulting kernel image is placed in the kernels/ directory:

    $ ls -lh scripts/kernel/clang-13-nginx_fc-x86_64
-rwxr-xr-x 2 razvand razvand 15M Jan 27 13:42 scripts/kernel/clang-13-nginx_fc-x86_64

  3. Use the corresponding run script in the run/ directory, such as:

    ./scripts/run/clang-13-fc-x86_64-nofs.sh

    A successful run shows an output such as:

    1: Set IPv4 address 172.44.0.2 mask 255.255.255.0 gw 172.44.0.1
en1: Added
en1: Interface is up
Powered by Unikraft Telesto (0.16.1~a922af77)

Depending on the running environment, use the following commands to close the virtual machine (if it's a server or something that keeps running):

  • For KraftKit, use Ctrl+c to close the console output and then close the virtual machine with:

    kraft rm --all

  • For QEMU, use Ctrl+a x to close the virtual machine.

  • For Firecracker, open a new console and use, as root (prefix with sudo if required):

    pkill -f firecracker