Skip to content

Latest commit

 

History

History
261 lines (213 loc) · 12 KB

README.md

File metadata and controls

261 lines (213 loc) · 12 KB

You can find the latest released version here and packagist

KnownUser.V3.PHP

The Queue-it Security Framework is used to ensure that end users cannot bypass the queue by adding a server-side integration to your server. It supports php >= 5.3.3.

Introduction

When a user is redirected back from the queue to your website, the queue engine can attache a query string parameter (queueittoken) containing some information about the user. The most important fields of the queueittoken are:

  • q - the users unique queue identifier
  • ts - a timestamp of how long this redirect is valid
  • h - a hash of the token

The high level logic is as follows:

The KnownUser validation flow

  1. User requests a page on your server
  2. The validation method sees that the has no Queue-it session cookie and no queueittoken and sends him to the correct queue based on the configuration
  3. User waits in the queue
  4. User is redirected back to your website, now with a queueittoken
  5. The validation method validates the queueittoken and creates a Queue-it session cookie
  6. The user browses to a new page and the Queue-it session cookie will let him go there without queuing again

How to validate a user

To validate that the current user is allowed to enter your website (has been through the queue) these steps are needed:

  1. Providing the queue configuration to the KnownUser validation
  2. Validate the queueittoken and store a session cookie

1. Providing the queue configuration

The recommended way is to use the Go Queue-it self-service portal to setup the configuration. The configuration specifies a set of Triggers and Actions. A Trigger is an expression matching one, more or all URLs on your website. When a user enter your website and the URL matches a Trigger-expression the corresponding Action will be triggered. The Action specifies which queue the users should be send to. In this way you can specify which queue(s) should protect which page(s) on the fly without changing the server-side integration.

This configuration can then be downloaded to your application server. Read more about how here.

2. Validate the queueittoken and store a session cookie

To validate that the user has been through the queue, use the KnownUser::validateRequestByIntegrationConfig() method. This call will validate the timestamp and hash and if valid create a "QueueITAccepted-SDFrts345E-V3_[EventId]" cookie with a TTL as specified in the configuration. If the timestamp or hash is invalid, the user is send back to the queue.

Implementation

The KnownUser validation must be done on all requests except requests for static resources like images, css files and .... So, if you add the KnownUser validation logic to a central place, then be sure that the Triggers only fire on page requests (including ajax requests) and not on e.g. image.

If we have the integrationconfig.json copied in the folder beside other knownuser files inside web application folder then the following method is all that is needed to validate that a user has been through the queue:

require_once( __DIR__ .'Models.php');
require_once( __DIR__ .'KnownUser.php');

$configText = file_get_contents('integrationconfig.json');
$customerID = ""; //Your Queue-it customer ID
$secretKey = ""; //Your 72 char secret key as specified in Go Queue-it self-service platform

$queueittoken = isset( $_GET["queueittoken"] )? $_GET["queueittoken"] :'';

try
{
    $fullUrl = getFullRequestUri();
    $currentUrlWithoutQueueitToken = preg_replace("/([\\?&])("."queueittoken"."=[^&]*)/i", "", $fullUrl);
    
    //Verify if the user has been through the queue
    $result = QueueIT\KnownUserV3\SDK\KnownUser::validateRequestByIntegrationConfig(
       $currentUrlWithoutQueueitToken, $queueittoken, $configText, $customerID, $secretKey);
		
    if($result->doRedirect())
    {
    	//Adding no cache headers to prevent browsers to cache requests
	header("Expires:Fri, 01 Jan 1990 00:00:00 GMT");
	header("Cache-Control: no-store, no-cache, must-revalidate, max-age=0");
	header("Pragma: no-cache");
	//end
    
        //Send the user to the queue - either because hash was missing or because it was invalid
        header('Location: '.$result->redirectUrl);
        die();
    }
    if(!empty($queueittoken))
    {        
	//Request can continue - we remove queueittoken form querystring parameter to avoid sharing of user specific token
        header('Location: ' . $currentUrlWithoutQueueitToken);
	die();
    }
}
catch(\Exception $e)
{
    // There was an error validating the request
    // Use your own logging framework to log the error
    // This was a configuration error, so we let the user continue
}

Helper method to get the current url (you can have your own). The result of this helper method is used to match Triggers and as the Target url (where to return the users to). It is therefor important that the result is exactly the url of the users browsers.

So if your webserver is e.g. behind a load balancer that modifies the host name or port, reformat the helper method as needed:

 function getFullRequestUri()
 {
     // Get HTTP/HTTPS (the possible values for this vary from server to server)
    $myUrl = (isset($_SERVER['HTTPS']) && $_SERVER['HTTPS'] && !in_array(strtolower($_SERVER['HTTPS']),array('off','no'))) ? 'https' : 'http';
    // Get domain portion
    $myUrl .= '://'.$_SERVER['HTTP_HOST'];
    // Get path to script
    $myUrl .= $_SERVER['REQUEST_URI'];
    // Add path info, if any
    if (!empty($_SERVER['PATH_INFO'])) $myUrl .= $_SERVER['PATH_INFO'];

    return $myUrl; 
 }

Alternative Implementation

Queue configuration

If your application server (maybe due to security reasons) is not allowed to do external GET requests, then you have three options:

  1. Manually download the configuration file from Queue-it Go self-service portal, save it on your application server and load it from local disk
  2. Use an internal gateway server to download the configuration file and save to application server
  3. Specify the configuration in code without using the Trigger/Action paradigm. In this case it is important only to queue-up page requests and not requests for resources or AJAX calls. This can be done by adding custom filtering logic before caling the KnownUser::resolveQueueRequestByLocalConfig() method.

The following is an example of how to specify the configuration in code:

require_once( __DIR__ .'Models.php');
require_once( __DIR__ .'KnownUser.php');

$customerID = ""; //Your Queue-it customer ID
$secretKey = ""; //Your 72 char secret key as specified in Go Queue-it self-service platform

$eventConfig = new QueueIT\KnownUserV3\SDK\QueueEventConfig();
$eventConfig->eventId = ""; // ID of the queue to use
$eventConfig->queueDomain = "xxx.queue-it.net"; //Domain name of the queue - usually in the format [CustomerId].queue-it.net
//$eventConfig->cookieDomain = ".my-shop.com"; //Optional - Domain name where the Queue-it session cookie should be saved
$eventConfig->cookieValidityMinute = 15; //Optional - Validity of the Queue-it session cookie. Default is 10 minutes
$eventConfig->extendCookieValidity = true; //Optional - Should the Queue-it session cookie validity time be extended each time the validation runs? Default is true.
// $eventConfig->culture = "da-DK"; //Optional - Culture of the queue ticket layout in the format specified here: https://msdn.microsoft.com/en-us/library/ee825488(v=cs.20).aspx Default is to use what is specified on Event
// $eventConfig->layoutName = "NameOfYourCustomLayout"; //Optional - Name of the queue ticket layout - e.g. "Default layout by Queue-it". Default is to take what is specified on the Event

$queueittoken = isset( $_GET["queueittoken"] )? $_GET["queueittoken"] :'';

try
{
    $fullUrl = getFullRequestUri();
    $currentUrlWithoutQueueitToken = preg_replace("/([\\?&])("."queueittoken"."=[^&]*)/i", "", $fullUrl);

    //Verify if the user has been through the queue
    $result = QueueIT\KnownUserV3\SDK\KnownUser::resolveQueueRequestByLocalConfig(
       $currentUrlWithoutQueueitToken, $queueittoken, $eventConfig, $customerID, $secretKey);
	
    if($result->doRedirect())
    {
        //Adding no cache headers to prevent browsers to cache requests
        header("Expires:Fri, 01 Jan 1990 00:00:00 GMT");
        header("Cache-Control: no-store, no-cache, must-revalidate, max-age=0");
        header("Pragma: no-cache");
        //end
        //Send the user to the queue - either because hash was missing or because it was invalid
        header('Location: '.$result->redirectUrl);
        die();
    }
    if(!empty($queueittoken))
    {        
	//Request can continue - we remove queueittoken form querystring parameter to avoid sharing of user specific token
        header('Location: ' . $currentUrlWithoutQueueitToken);
	die();
    }
}
catch(\Exception $e)
{
    // There was an error validating the request
    // Use your own logging framework to log the error
    // This was a configuration error, so we let the user continue
}

Protecting ajax calls on static pages

If you have some static html pages (might be behind cache servers) and you have some ajax calls from those pages needed to be protected by KnownUser library you need to follow these steps:

  1. You are using v.3.5.1 (or later) of the KnownUser library.
  2. Make sure KnownUser code will not run on static pages (by ignoring those URLs in your integration configuration).
  3. Add below JavaScript tags to static pages :
<script type="text/javascript" src="//static.queue-it.net/script/queueclient.min.js"></script>
<script
 data-queueit-intercept-domain="{YOUR_CURRENT_DOMAIN}"
   data-queueit-intercept="true"
  data-queueit-c="{YOUR_CUSTOMER_ID}"
  type="text/javascript"
  src="//static.queue-it.net/script/queueconfigloader.min.js">
</script>
  1. Use the following method to protect all dynamic calls (including dynamic pages and ajax calls).
require_once( __DIR__ .'Models.php');
require_once( __DIR__ .'KnownUser.php');

$configText = file_get_contents('integrationconfig.json');
$customerID = ""; //Your Queue-it customer ID
$secretKey = ""; //Your 72 char secret key as specified in Go Queue-it self-service platform

$queueittoken = isset( $_GET["queueittoken"] )? $_GET["queueittoken"] :'';

try
{
    $fullUrl = getFullRequestUri();
    $currentUrlWithoutQueueitToken = preg_replace("/([\\?&])("."queueittoken"."=[^&]*)/i", "", $fullUrl);

    //Verify if the user has been through the queue
    $result = QueueIT\KnownUserV3\SDK\KnownUser::validateRequestByIntegrationConfig(
       $currentUrlWithoutQueueitToken, $queueittoken, $configText, $customerID, $secretKey);
		
    if($result->doRedirect())
    {
        //Adding no cache headers to prevent browsers to cache requests
        header("Expires:Fri, 01 Jan 1990 00:00:00 GMT");
        header("Cache-Control: no-store, no-cache, must-revalidate, max-age=0");
        header("Pragma: no-cache");
        //end
    
        if(!$result->isAjaxResult)
        {
            //Send the user to the queue - either because hash was missing or because is was invalid
            header('Location: ' . $result->redirectUrl);		            
        }
        else
        {
            header('HTTP/1.0: 200');
            header($result->getAjaxQueueRedirectHeaderKey() . ': '. $result->getAjaxRedirectUrl());            
        }
		
        die();
    }
    if(!empty($queueittoken) && !empty($result->actionType))
    {        
	//Request can continue - we remove queueittoken form querystring parameter to avoid sharing of user specific token
        header('Location: ' . $currentUrlWithoutQueueitToken);
	die();
    }
}
catch(\Exception $e)
{
    // There was an error validating the request
    // Use your own logging framework to log the error
    // This was a configuration error, so we let the user continue
}