Example code: demo-display-sh1106/src/main.rs
SH1106 is a very nicely readable OLED (white or blue) display connected
using the SPI interface and controlled by the sh1106 driver that supports
embedded_graphics for rendering.
| MCU Board | Other | TM1367 Board | Comment |
|---|---|---|---|
| - | pull down (GND) | CS | Chip select |
| PB6 | DC | Data/command | |
| PB14 | RES | Reset | |
| PB15 | MOSI | ||
| PB13 | CLK | ||
| - | VCC | VCC | |
| - | GND | GND |
Note: connect the display RES pin to the MCU and do not forget to call the
display.reset before sending other data/commands, otherwise the picture
on the display would be totally scattered
display.reset(&mut display_reset, &mut delay).map_err(|_| ())?;