Clarification on Bluetooth Support and Future Plans for Magic Trackpad 2

[Tosko4]

Hi,

Thank you for your hard work on this project—it's been incredibly helpful! I noticed that the readme states Bluetooth is not supported and that the project is designed specifically for USB connections. Could you please clarify if this limitation applies to the entire driver or just the control panel functionality?

I'm trying to decide whether to use this project or another one if I want to use the Magic Trackpad 2 over Bluetooth. Are there any plans to support Bluetooth in the future, or should I look into alternatives?

Thanks in advance for your guidance!

[vitoplantamura]

hi, if you install my driver following the instructions in the main README of this project, using the MT2 via bluetooth will work but the feature set will be limited to that of the original imbushuo driver. In this case you will lose the ability to set all the options present in the Control Panel, such as haptic feedback and all the options to improve the precision of the pointer. Although also supporting the Bluetooth version of the driver would be technically simple, the problem is signing the Bluetooth driver (necessary for installation on end users' PCs): the cost is 500/600 USD per year and sustaining this expense in case of my driver would only make sense (even keeping it free) if thousands of users were using it... Vito

[Tosko4]

Understood. Too bad that it costs money. Would there be any way to work with some sort of self signed certificate?

[vitoplantamura]

No, unfortunately: the imbushuo bluetooth driver for the MT2 is a KMDF driver. The only way to run it without having it digitally signed by Microsoft is to boot the OS in Test Mode. Obviously this is something that you cannot ask an end user to do. Vito

[hutchx86]

Hi, first of all: love the work you put into this!
Here's my thought: As far as I remember (from installing a bunch of modded drivers in the past) you only have to disable driver signature enforcement once, install the driver, and then you can reboot and the driver should stay installed, no?

In that case, you could give people the option. Either way, I'll gladly test it, should you ever decide to actually make your tool work with the trackpad over bluetooth as well. :D

[hutchx86]

After reading a bit more, that might only work for UMDF drivers, and might clash with secure boot/core isolation anyway. Bummer. I'd still be willing to try it, though. lol