OCToolBox crashes when selecting Device tab

[perez987]

Good afternoon. OCToolBox is a very useful app for all OpenCore users. But I've have an issue: every time I try to go to the Device tab, the app crashes. Everything else works perfectly.

I'm on macOS Ventura (tried 13.3.1 and 13.4b).

Anyway, thanks for your work.

crash-report.txt

[webfalter]

@perez987
Can you read the output from https://github.com/acidanthera/gfxutil/releases
./gfxutil -f hdef
./gfxutil -f GFX0
./gfxutil -f igpu

And write your hardware

[perez987]

@webfalter
I’m not at home. I’ll do it on Tuesday. Thanks.

[perez987]

@webfalter
Tried again OCToolBox 0.9.4, no changes, app crashes when selecting Device tab, all other tabs work properly.

gfxutil -f hdef
00:1f.3 8086:a348 /PCI0@0/HDEF@1F,3 = PciRoot(0x0)/Pci(0x1F,0x3)

gfxutil -f GFX0
03:00.0 1002:73ff /PCI0@0/PEG0@1/PEGP@0/BRG0@0/GFX0@0 = PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x0,0x0)

gfxutil -f igpu
DevicePath not found!
(MacPro7,1 or iMacPro1,1 SMBIOS, iGPU disabled in BIOS).

My system: Z390 + i9-9900K + RX 6600 XT + Sonoma DP1 or Ventura 13.4.

[perez987]

@webfalter
More info, this may be where the error originates.
If I enable iGPU in BIOS and use iMac19.1 SMBIOS:

• iGPU is seen with gfxutil

gfxutil -f igpu
00:02.0 8086:3e9b /PCI0@0/IGPU@2 = PciRoot(0x0)/Pci(0x2,0x0)

• Device tab works fine, app doesn't crash.

Note: Auswahl and Grafikare not translated when the app runs in English.

[perez987]

@webfalter
Closing issue as it seems to be known. When no iGFX is present, device tab crashes. Please fix this. I really like this app.

[webfalter]

Be patient for a few more days, tinker around a bit. Sorry I don't have the time.