🚀 Next.js for Drupal multilingual template by Wunder

This is a starter template created by Wunder for a decoupled website using the open-source Next.js for Drupal project by Chapter Three and contributors.

⚠️⚠️ Now using the App router in Next.js! 🎉 If you prefer using the pages router, we have kept the old version in the pages-router branch.

🪂 Check out the running demo at https://next-drupal-starterkit.dev.wdr.io !

The aims of this template are:

• automating local environment set up as much as possible, lowering the effort needed to get the decoupled system working
• presenting simple solutions for the most common feature requests for a Drupal site
• focusing on the multilingual aspect which presents interesting challenges, and is a very common requirement in our projects.

Setting up Next.js for Drupal normally requires various steps, in this template we have automated them using a combination of environment variables and the upcoming Distributions and Recipes initiative on the Drupal side.

The template includes all you need to have a working multi-language decoupled Drupal and Next.js site up and running in seconds, complete with demo content, an Elasticsearch-powered search interface, and more. Check the what's included section ↘️ for more details.

This example is meant to be used together with the Silta hosting system by Wunder, but it can be used with any hosting system.

🤓 Lando or DDEV? Your choice!

This starterkit can be used either with Lando or with DDEV. The only requirement is to have either one of those installed.

Lando minimum version

The minimum version of lando required is 3.21.

Check the version property in the .lando.yml file to see which version of Lando is currently supported.

⚠️⚠️ NOTE: Using npm

Instead of running npm operations in your host machine, this template requires you to use npm inside Lando or DDEV: this ensures the same node version is used by all developers participating in the project, and also that the node process has the right environment variables to connect to the backend without the need of additional configuration steps.

Just prefix all npm operations with lando or ddev.

So instead of npm install, run lando npm install or ddev npm install, instead of npm run dev run lando npm run dev or ddev npm run dev, etc.

⚠️⚠️ For DDEV, when using npm commands you have to make sure that you are in the next directory.

Stopping a running npm operation running inside the Lando node container

If you have closed the terminal window where you were running the server with lando npm start or lando npm run dev, and you want to stop the running npm operation, you can use the specially created lando npm-stop command that will log into the node container and kill all node processes there.

🤸 Getting started

Follow this guide to get the backend and frontend up and running. You can either do it all in one go, or step by step to understand better what's going on.

🏎️ Quickstart

1. Clone this repository
2. Choose which local environment you want to use: Lando or DDEV.
3. Run the setup script corresponding to your chosen local environment:

./setup-lando.sh

or

./setup-ddev.sh

The script will execute a series of commands in sequence. If an error occurs, you can run the script again, and it will pick up where it left off.

If the script has failed on some step, and instead of continuing you want to start from scratch, you can run the script with the -c flag:

./setup-[lando/ddev].sh -c

NOTE: the script will install the site from scratch. Export your database if you have started working with the template, and you have something valuable in it. :)

👨‍💻Urls

After the setup is complete, you can access the site at the following URLs:

With Lando

Lando has two separate containers for the backend and frontend, so the URLs are different:

Backend	Frontend
https://next-drupal-starterkit.lndo.site/	https://frontend.lndo.site/

You can get a more detailed list of all the services and their urls with the command:

lando info

With DDEV

DDEV has a single container for both the backend and frontend, so the URLs differ only by the port:

Backend	Frontend
https://next-drupal-starterkit.ddev.site	https://next-drupal-starterkit.ddev.site:3000

NOTE: localhost:3000 does not work in DDEV, you need to use the URL provided by DDEV above.

You can get a more detailed list of all the services and their urls with the command:

ddev describe

📦 What's included?

We try to add to the template what we think are the most commonly requested features in website projects. Most of these are based on the features provided by Next.js for Drupal, but we have paid special attention to making these work in a multilanguage setup.

Preview mode

The template is set up to allow editors to use Draft mode. Visit the node page on the Drupal side while the frontend is running to see a preview of the page.

On-demand revalidation

The template includes On demand revalidation, when saving or editing a piece of content the corresponding page in the frontend will be recreated. Because the frontpage in this example site includes a list of articles, the frontpage paths have been manually added to the configuration for the article content type.

Metatag support

The template includes basic metatag support. Default metatag values are added to the frontend site's translation files, and content-based metatags are added to the Drupal backend using the Metatag module. The Next.js site will then create the metatags using a combination of these two data sources.

Search indexing and frontend search interface

The site is set up to work with Elasticsearch to provide a complete search experience. Both the Lando and DDEV setups include spinning up an Elasticsearch instance with the required plugins. The content normalization and index handling is managed via the custom wunder_search module, which in turn makes use of the Elasticsearch helper Drupal contrib module. On the frontend side, the search user uses the Elastic UI library. The frontend site queries Elasticsearch via a simple proxy controller in Drupal, also provided by the included wunder_search custom Drupal module. The included frontend search UI is provided by Searchkit.

Importable demo content

The template includes a Drupal migration to populate the site with a set of translated demo content and some test users. This includes paragraphs, images, videos, etc. Most of the content has been generated by AI.

Multilanguage setup

This template is set up to use three languages: English (default), Finnish, and Swedish. These languages are added in Drupal using the standard translation modules and integrated into the frontend using the Next-Intl module. The Elasticsearch indexing takes the content language into account for analysis, and the interface is fully translated. (Note: Most translations were done using Google Translate, so please expect some inaccuracies in Finnish, Swedish, and even English. 🙂)

Webforms

The Drupal setup includes the popular Webform module. The frontpage on the frontend displays a form that will post data back to Drupal's webform, with basic validation and a feedback message. We decided to implement a static form, in the sense that the "hardcoded" fields in the frontend need to match the fields in the webform in the backend. Creating a dynamic system of forms that automatically match what's coming from the user-defined webforms in Drupal is out of scope for this template.

Drupal Paragraphs (including nested paragraphs)

The frontpage and page content types are configured to use the popular Paragraphs drupal module. The setup includes basic paragraph types to add images, videos, text, and also a nested paragraph type to demonstrate how to handle this in backend and frontend.

Retrying of failed requests

If the backend is not available momentarily, the frontend will try again to call it before returning an error.

Frontend user authentication and registration

The template includes the setup to allow users to log into the Drupal backend from the Next.js frontend, using Auth.js.

• As an example, only registered users are allowed to post to the drupal contact webform, and parts of the interface in the frontend are available only for logged-in users.
• Some test users are imported as part of the content migration (check the `users.csv' file for the credentials).
• New users can be created on the frontend using a simple registration form. Drupal will assign them the correct role, and will send them an email with the link to set their password.

Typescript

The frontend uses TypeScript to provide type safety.

TypeScript is setup quite loosely by default to minimise friction and make it accessible to developers who are not familiar with it. It is recommended to increase type safety by enabling some of the disabled rules in next/eslint.json.

Working with GraphQL and TypeScript

The project uses GraphQL to fetch data from the backend. The queries are defined in the next/lib/graphql directory. The queries are typed using the graphql-codegen package, which generates TypeScript types from the queries. The types are then used to type the data fetched from the backend.

When adding or modifying queries and fragments, the codegen script needs to be run to generate the corresponding types from the schema. Though you can always run lando npm run graphql-codegen or ddev npm run graphql-codegen yourself if needed, you shouldn't normally need to: lando npm run build or ddev npm run build will run the codegen before the build, and lando npm run dev or ddev npm run dev will start the codegen in watch mode alongside starting Next.js in development mode. The output of the codegen is gitignored, as the same step will be run on the CI server.

Note that when there are changes on the GraphQL server schema itself, you will need to stop and start the command again to fetch the new schema definition (it will keep watching your changed files, but will only re-fetch the schema from the server when the codegen command first runs). Also, you might need to run lando drush cr or ddev drush cr to clear the Drupal cache.

VSCode extensions to work with GraphQL and TypeScript

We have included a .vscode/extensions.json file that will suggest some useful extensions to work with GraphQL and TypeScript in VSCode with full autocomplete and syntax highlighting. You can install them by clicking on the notification that appears when you open the project in VSCode.

Please note:

1. We suggest opening the project in VSCode using the /next directory as the root of the project.
2. The latest version of the "GraphQL: Language Feature Support" extension currently has a bug that prevents it from working correctly with the graphql-codegen package. Make sure to install the v0.9.3 version instead.

Typesafe environment variables

The environment variables used by the frontend are also checked for type safety. If used correctly, a Zod error will prevent the frontend from building if the environment variables are not set according to the schema defined in next/env.ts.

To add a new environment variable:

1. Add it to .lando.yml, under services > node > overrides > environment. or to .ddev/config.yaml for DDEV.
2. Add it to next/env.ts. Note that it must be added twice there - once under server/client to define its schema, and once under runtimeEnv to read the actual value.
3. Import it in the file where it's used with import { env } from "@/env"; and use it like env.MY_ENV_VAR. At this point, your environment variable should be working locally.
4. To ensure it also works in CircleCI and Silta, also add it to.circleci/config.yml and silta-next.yml.

XML sitemap

The Next.js frontend will query the Drupal backend to generate a /sitemap.xml path that can be submitted to search engines.

Testing with Cypress (Lando only)

The template includes example tests to be run with Cypress. The Lando setup includes a headless browser and Cypress, so you can run the tests locally without the need to install anything else, but it won't be able to use the visual Cypress application. See below for more details.

Running tests locally inside Lando on the command line

To run the Cypress tests inside Lando:

1. make sure the backend is running
2. run lando npm run build to build the frontend
3. run lando npm run start to start serving the frontend
4. open another terminal and run lando npm run cypress:run to start the Cypress test runner

A video of the run will be recorded, and it will be available at next/cypress/videos.

Using the Cypress application

If you want to run the visual Cypress application, you will need to run cypress outside of Lando, on your host computer. For this to work:

1. ensure you are using the correct node version, matching what we use inside Lando (see the .lando.yml file for details)
2. ensure your machine has the correct dependencies installed (see the Cypress docs for details)
3. check which version of Cypress is specified in next/package.json and install the same version on your host computer globally with npm install -g cypress@<version>
4. while in the /next directory, run npm run cypress:open (notice that there's no lando at the beginning of the command).

You can then run your tests inside the Cypress application.

Redis caching

The project is set up to use Redis if available to cache the responses from the backend. Both the ddev and lando setup include redis by default. The connection between next.js and redis is handled by the @neshca/cache-handler package.

Connecting to Redis in the local environment

You can connect to Redis and interact with it using the redis cli in the local environment by running the following command:

If you are using Lando:

lando redis-cli

If you are using DDEV:

ddev redis