Skip to content

Latest commit

 

History

History
507 lines (365 loc) · 14.6 KB

install.asciidoc

File metadata and controls

507 lines (365 loc) · 14.6 KB
Raw

Installing qutebrowser

Note
 qutebrowser recently had some bigger dependency changes for v1.0.0, which means those instructions might be out of date in some places. Please help updating them if you notice something being broken!

On Debian / Ubuntu

How to install qutebrowser depends a lot on the version of Debian/Ubuntu you’re running.

Debian Jessie / Ubuntu 14.04 LTS / Linux Mint < 18

Those distributions only have Python 3.4 and a too old Qt version available, while qutebrowser requires Python 3.5 and Qt 5.7.1 or newer.

It should be possible to install Python 3.5 e.g. from the deadsnakes PPA or via pyenv, but nobody tried that yet.

If you get qutebrowser running on those distributions, please contribute to update this documentation!

Ubuntu 16.04 LTS / Linux Mint 18

Ubuntu 16.04 doesn’t come with an up-to-date engine (a new enough QtWebKit, or QtWebEngine). However, it comes with Python 3.5, so you can install qutebrowser via tox.

You’ll need some basic libraries to use the tox-installed PyQt:

# apt install libglib2.0-0 libgl1 libfontconfig1 libx11-xcb1 libxi6 libxrender1 libdbus-1-3

Debian Stretch / Ubuntu 17.04 and 17.10

Those versions come with QtWebEngine in the repositories. This makes it possible to install qutebrowser via the Debian package.

You’ll need to download three packages:

After downloading, install the packages (make sure to install all the downloaded qutebrowser deb files in one apt command):

# apt install ./python3-pypeg2_*_all.deb
# apt install ./qutebrowser*.deb

For an update after the initial install, you only need to download/install the qutebrowser package.

Debian Testing / Ubuntu 18.04

On Debian Testing, qutebrowser is in the official repositories, and you can install it with apt:

# apt install qutebrowser

Additional hints

  • Alternatively, you can install qutebrowser via tox to get a newer QtWebEngine version.

  • If running from git, run the following to generate the documentation for the :help command:

    # apt install --no-install-recommends asciidoc source-highlight
$ python3 scripts/asciidoc2html.py

  • If you prefer using QtWebKit, there’s an up-to-date version available in Debian Testing.

  • If video or sound don’t work with QtWebKit, try installing the gstreamer plugins:

    # apt install gstreamer1.0-plugins-{bad,base,good,ugly}

On Fedora

Note
 Fedora’s packages used to be outdated for a long time, but are now (November 2017) maintained and up-to-date again.

qutebrowser is available in the official repositories:

# dnf install qutebrowser

However, note that Fedora 25/26 won’t be updated to qutebrowser v1.0, so you might want to install qutebrowser via tox instead there.

Additional hints

Fedora only ships free software in the repositories. To be able to play videos with proprietary codecs with QtWebEngine, you will need to install an additional package from the RPM Fusion Free repository. For more information see https://rpmfusion.org/Configuration.

# dnf install qt5-qtwebengine-freeworld

On Archlinux

qutebrowser is available in the official [community] repository.

# pacman -S qutebrowser

There is also a -git version available in the AUR: qutebrowser-git.

You can install it using makepkg like this:

$ git clone https://aur.archlinux.org/qutebrowser-git.git
$ cd qutebrowser-git
$ makepkg -si
$ cd ..
$ rm -r qutebrowser-git

or you could use an AUR helper, e.g. yaourt -S qutebrowser-git.

If video or sound don’t work with QtWebKit, try installing the gstreamer plugins:

# pacman -S gst-plugins-{base,good,bad,ugly} gst-libav

On Gentoo

Note
 Gentoo’s packages used to be severely outdated for a long time, but are now (October 2017) maintained and up-to-date again.

qutebrowser is available in the main repository and can be installed with:

# emerge -av qutebrowser

To use QtWebKit instead of QtWebEngine, you’ll need a newer QtWebKit using this ebuild.

If video or sound don’t work with QtWebKit, try installing the gstreamer plugins:

# emerge -av gst-plugins-{base,good,bad,ugly,libav}

To be able to play videos with proprietary codecs with QtWebEngine, you will need to turn off the bindist flag for dev-qt/qtwebengine.

See the Gentoo Wiki for more information.

On Void Linux

qutebrowser is available in the official repositories and can be installed with:

# xbps-install qutebrowser

It’s currently recommended to install python3-PyQt5-webengine and python3-PyQt5-opengl, then start with --backend webengine to use the new backend.

Since the v1.0 release, qutebrowser uses QtWebEngine by default.

On NixOS

Nixpkgs collection contains pkgs.qutebrowser since June 2015. You can install it with:

$ nix-env -i qutebrowser

It’s recommended to install qt5.qtwebengine and start with --backend webengine to use the new backend.

Since the v1.0 release, qutebrowser uses QtWebEngine by default.

On openSUSE

There are prebuilt RPMs available at OBS.

To use the QtWebEngine backend, install libqt5-qtwebengine.

On Slackware

qutebrowser is available in the 3rd party repository at slackbuilds.org

An easy way to install it is with sbopkg (frontend for slackbuilds.org) available at sbopkg.org

sbopkg can be run with a dialog screen interface, or via command line options.

After installing the latest sbopkg package, choose your release version, and sync the repo.

sbopkg -V 14.2
sbopkg -r

The pyPEG2 and MarkupSafe dependencies both need building for python3. You can either set PYTHON3=yes in the shell or set those as options in the dialog menu for each.

Generate a queue file for qutebrowser and dependencies:

sqg -p qutebrowser

Then load the queue in the dialog queue menu or via:

PYTHON3=yes sbopkg -i qutebrowser

If you use the dialog screen you can deselect any already-installed packages that you don’t need/want to rebuild before starting the build process.

On OpenBSD

Warning
 OpenBSD only packages a legacy unmaintained version of QtWebKit (for which support was dropped in qutebrowser v1.0). It’s advised to not use qutebrowser from OpenBSD ports for untrusted websites.

qutebrowser is in OpenBSD ports.

Install the package:

# pkg_add qutebrowser

Or alternatively, use the ports system :

# cd /usr/ports/www/qutebrowser
# make install

On FreeBSD

qutebrowser is in FreeBSD ports.

It can be installed with:

# cd /usr/ports/www/qutebrowser
# make install clean

At present, precompiled packages are not available for this port, and QtWebEngine backend is also not available.

On Windows

There are different ways to install qutebrowser on Windows:

Prebuilt binaries

Prebuilt standalone packages and installers are built for every release.

Note that you’ll need to upgrade to new versions manually (subscribe to the qutebrowser-announce mailinglist to get notified on new releases). You can install a newer version without uninstalling the older one.

The binary release ships with a QtWebEngine built without proprietary codec support. To get support for e.g. h264/h265 videos, you’ll need to build QtWebEngine from source yourself with support for that enabled.

Chocolatey package

  • PackageManagement PowerShell module

PS C:\> Install-Package qutebrowser

  • Chocolatey’s client

C:\> choco install qutebrowser

  • Scoop’s client

C:\> scoop bucket add extras
C:\> scoop install qutebrowser

Manual install

  • Use the installer from python.org to get Python 3 (be sure to install pip).

  • Install tox via pip:

$ pip install tox

On macOS

Prebuilt binary

The easiest way to install qutebrowser on macOS is to use the prebuilt .app files from the release page.

Note that you’ll need to upgrade to new versions manually (subscribe to the qutebrowser-announce mailinglist to get notified on new releases).

The binary release ships with a QtWebEngine built without proprietary codec support. To get support for e.g. h264/h265 videos, you’ll need to build QtWebEngine from source yourself with support for that enabled.

This binary is also available through the Homebrew Cask package manager:

$ brew cask install qutebrowser

Manual Install

Alternatively, you can install the dependencies via a package manager (like Homebrew or MacPorts) and run qutebrowser from source.

Homebrew

$ brew install qt5
$ pip3 install qutebrowser

Since the v1.0 release, qutebrowser uses QtWebEngine by default.

Homebrew’s builds of Qt and PyQt don’t come with QtWebKit (and --with-qtwebkit uses an old version of QtWebKit which qutebrowser doesn’t support anymore). If you want QtWebKit support, you’ll need to build an up-to-date QtWebKit manually.

Packagers

There are example .desktop and icon files provided. They would go in the standard location for your distro (/usr/share/applications and /usr/share/pixmaps for example).

The normal setup.py install doesn’t install these files, so you’ll have to do it as part of the packaging process.

Installing qutebrowser with tox

Getting the repository

First of all, clone the repository using git and switch into the repository folder:

$ git clone https://github.com/qutebrowser/qutebrowser.git
$ cd qutebrowser

Installing dependencies (including Qt)

Then run tox inside the qutebrowser repository to set up a virtual environment:

$ tox -e mkvenv-pypi

This installs all needed Python dependencies in a .venv subfolder.

This comes with an up-to-date Qt/PyQt including QtWebEngine, but has a few caveats:

  • Make sure your python3 is Python 3.5 or newer, otherwise you’ll get a "No matching distribution found" error. Note that qutebrowser itself also requires this.

  • It only works on 64-bit x86 systems, with other architectures you’ll get the same error.

  • If your distribution uses OpenSSL 1.1 (like Debian Stretch or Archlinux), you’ll need to set LD_LIBRARY_PATH to the OpenSSL 1.0 directory (export LD_LIBRARY_PATH=/usr/lib/openssl-1.0 on Archlinux) before starting qutebrowser if you want SSL to work in certain downloads (e.g. for :adblock-update or :download).

    • On Ubuntu (tested on 18.04), you will need to install the libssl1.0.0 package (apt install libssl1.0.0). Then, in the qutebrowser git repository, create a directory named libssl (mkdir libssl), and link libcrypto.so.1.0.0 and libssl.so.1.0.0 into it without the versioning part in their names (ln -s /usr/lib/x86_64-linux-gnu/libcrypto.so.1.0.0 libssl/libcrypto.so and ln -s /usr/lib/x86_64-linux-gnu/libssl.so.1.0.0 libssl/libssl.so). Now you can start qutebrowser issuing export LD_LIBRARY_PATH=$(pwd)/libssl beforehand.

  • It comes with a QtWebEngine compiled without proprietary codec support (such as h.264).

See the next section for an alternative.

Installing dependencies (system-wide Qt)

Alternatively, you can use tox -e mkvenv (without -pypi) to symlink your local Qt install instead of installing PyQt in the virtualenv. However, unless you have a new QtWebKit or QtWebEngine available, qutebrowser will not work. It also typically means you’ll be using an older release of QtWebEngine.

On Windows, run set PYTHON=C:\path\to\python.exe (CMD) or ``$Env:PYTHON = "…​"` (Powershell) first.

Creating a wrapper script

Running tox does not install a system-wide qutebrowser script. You can launch qutebrowser by doing:

.venv/bin/python3 -m qutebrowser

You can create a simple wrapper script to start qutebrowser somewhere in your $PATH (e.g. /usr/local/bin/qutebrowser or ~/bin/qutebrowser):

#!/bin/bash
~/path/to/qutebrowser/.venv/bin/python3 -m qutebrowser "$@"

Building the docs

To build the documentation, install asciidoc (note that LaTeX which comes as optional/recommended dependency with some distributions is not required).

Then, run:

$ python3 scripts/asciidoc2html.py

Updating

When you updated your local copy of the code (e.g. by pulling the git repo, or extracting a new version), the virtualenv should automatically use the updated code. However, if dependencies got added, this won’t be reflected in the virtualenv. Thus it’s recommended to run the following command to recreate the virtualenv:

$ tox -r -e mkvenv-pypi