Segmentation fault when running ros2 humble (mono)

[Nikolaiarn]

I have seen that there is someone else who has had the same error, but I cant find any solution. OrbSlam3 works fine in the euroc demo. Here is the full error:

nikolai@NikUbuntu22:~/colcon_ws$ ros2 run orbslam3 mono /home/nikolai/colcon_ws/src/orbslam3/vocabulary/ORBvoc.txt /home/nikolai/colcon_ws/src/orbslam3/config/monocular/TUM1.yaml

ORB-SLAM3 Copyright (C) 2017-2020 Carlos Campos, Richard Elvira, Juan J. Gómez, José M.M. Montiel and Juan D. Tardós, University of Zaragoza.
ORB-SLAM2 Copyright (C) 2014-2016 Raúl Mur-Artal, José M.M. Montiel and Juan D. Tardós, University of Zaragoza.
This program comes with ABSOLUTELY NO WARRANTY;
This is free software, and you are welcome to redistribute it
under certain conditions. See LICENSE.txt.

Input sensor was set to: Monocular

Loading ORB Vocabulary. This could take a while...
Vocabulary loaded!

Initialization of Atlas from scratch
Creation of new map with id: 0
Creation of new map with last KF id: 0
Seq. Name:

Camera Parameters:

• Camera: Pinhole
• Image scale: 1
• fx: 517.306
• fy: 516.469
• cx: 318.643
• cy: 255.314
• k1: 0.262383
• k2: -0.953104
• p1: -0.005358
• p2: 0.002628
• k3: 1.16331
• fps: 30
• color order: RGB (ignored if grayscale)

ORB Extractor Parameters:

• Number of Features: 1000
• Scale Levels: 8
• Scale Factor: 1.2
• Initial Fast Threshold: 20
• Minimum Fast Threshold: 7
  There are 1 cameras in the atlas
  Camera 0 is pinhole
  slam changed
  ============================
  Starting the Viewer
  [ros2run]: Segmentation fault

[Nikolaiarn]

You can solve the problem by unninnsistalling all ORB-SLAM files, then reverting back to opencv 4.2.0 then reinstalling all the files. worked for me

[Sn0wl3r0ker]

You can solve the problem by unninnsistalling all ORB-SLAM files, then reverting back to opencv 4.2.0 then reinstalling all the files. worked for me

worked for me, thank you!

[TSoli]

You can solve the problem by unninnsistalling all ORB-SLAM files, then reverting back to opencv 4.2.0 then reinstalling all the files. worked for me

Amazing! Worked for me too! I had to disable tbb when compiling opencv 4.2.0 with -DWITH_TBB=OFF on Linux Mint 21.3 (based on Ubuntu 22.04).

[dyhuachi]

You can solve the problem by unninnsistalling all ORB-SLAM files, then reverting back to opencv 4.2.0 then reinstalling all the files. worked for me

why the opencv 4.8.1 can not run,this question can be fixed?