a_master_c3_oled.yaml

#------------------------------
#-- a_master_c3_oled.yaml
#-- Petit code générique minimaliste pour des projets à base d'esp32-c3-oled
#-- ATTENTION: je ne sais pas pourquoi mais il faut le flasher via https://web.esphome.io (maintenir la touche BOOT pendant le RESET), via le port USB en ESPHOME cela ne fonctionne pas !
#-- 
#-- REMARQUE: au 29 décembre 2022, je ne sais pas pourquoi la luminosité du display OLED est très très faible !
#-- REMARQUE2: au 28 juillet 2023, il n'y a plus le problème de luminosité, par contre on affiche en négatif !
#-- 
#-- location: xxx
#-- zf221229.1836, zf230728.2256
#--
# sources: 
# https://github.com/01Space/ESP32-C3-0.42LCD
# https://github.com/01Space/ESP32-C3-0.42LCD/blob/main/Schematic/ESP32-C3-0.42OED%20Schematic.pdf


esphome:
  name: a_master_c3_oled
  # platformio_options:
  #   board_build.flash_mode: dio
  on_boot:
   - switch.turn_on: led
  # - switch.turn_off: led

esp32:
  board: esp32-c3-devkitm-1
  framework:
    type: arduino
  #   version: 2.0.5
  #   platform_version: 5.2.0





# Configuration WIFI
wifi:
  ssid: !secret wifi_ssid_3G_zf2
  password: !secret wifi_pass_3G_zf2

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "a_master_c3_oled Fallback"
    password: !secret ap_wifi_password

captive_portal:

# Enable logging
logger:
    level: VERBOSE

# Enable Home Assistant API
api:
  password: !secret api_password

ota:
  password: !secret ota_password

# WEB Server
web_server:
  port: 80


# Définition des Switch's
switch:
  - platform: gpio
    name: "a_master_c3_oled LED"
#    inverted: True
    id: led
    pin: GPIO9
    on_turn_on:
      - light.turn_on:
          id: a_master_c3_oled_rgb
          brightness: 30%
          red: 100%
          green: 0%
          blue: 0%
    on_turn_off:
      - light.turn_off:
          id: a_master_c3_oled_rgb

  - platform: restart
    name: "a_master_c3_oled Restart"


# Définition des Sensors
sensor:
  - platform: wifi_signal
    name: "a_master_c3_oled Signal Wi-Fi"
    update_interval: 5s

  - platform: uptime
    name: "a_master_c3_oled uptime"
    update_interval: 5s


# Définition des Sensors text
text_sensor:
  - platform: version
    name: "a_master_c3_oled Version 1150"

  - platform: wifi_info
    ip_address:
      name: a_master_c3_oled IP Address
      id: wifi_ip
    ssid:
      name: a_master_c3_oled Connected SSID
      id: wifi_ssid


# Définition des inputs numbers
number:
  - platform: template
    name: "a_master_c3_oled consigne alarme low"
    restore_value: true
    optimistic: true
    min_value: 0.0
    max_value: 0.8
    step: 0.01
    initial_value: 0.4
    unit_of_measurement: "V"
    id: a_master_c3_oled_consigne_alarme_low

light:
  - platform: neopixelbus
    type: GRB
    variant: WS2812
    pin: GPIO2
    num_leds: 1
    name: "a_master_c3_oled RGB"
    id: a_master_c3_oled_rgb





font:
#https://github.com/JotJunior/PHP-Boleto-ZF2/blob/master/public/assets/fonts/arial.ttf
  - file: 'arialn.ttf'
    id: font1
    size: 10
  - file: 'arialn.ttf'
    id: font2
    size: 13

i2c:
  sda: GPIO05
  scl: GPIO06
  scan: true
  frequency: 200kHz

display:
# https://github.com/01Space/ESP32-C3-0.42LCD
# http://www.esp8266learning.com/wemos-oled-shield-example.php
# https://esphome.io/api/namespaceesphome_1_1display.html
  - platform: ssd1306_i2c
    #model: "SSD1306 64x48"
    model: "SSD1306 72x40"
    address: 0x3C
    invert: true
    update_interval: 3s
    lambda: |-

      // Turn the whole display on.
      //it.fill(COLOR_ON);
      // Turn the whole display off.
      //it.fill(COLOR_OFF);

      // For example, draw a line from [x=0,y=0] to [x=50,y=50]
      it.line(0, 0, 72, 40);

      
      // Print "Hello Zuzu" for fonts tests in top center.
      it.print(36, 5, id(font2), TextAlign::TOP_CENTER, "Hello Zuzu");
      it.print(36, 20, id(font2), TextAlign::TOP_CENTER, "Ca marche !");



#



      # // Print inside temperature (from homeassistant sensor)
      # it.printf(0, 7, id(font1), TextAlign::BASELINE_LEFT, "In side");
      # if (id(inside_temperature).has_state()) {
      #   it.printf(64, 7, id(font1), TextAlign::BASELINE_RIGHT , "%.1f°C", id(inside_temperature).state);
      # }

      # // Print outside temperature (from homeassistant sensor)
      # it.printf(0, 16, id(font1), TextAlign::BASELINE_LEFT, "Out side");
      # if (id(outside_temperature).has_state()) {
      #   it.printf(64, 16, id(font1), TextAlign::BASELINE_RIGHT , "%.1f°C", id(outside_temperature).state);
      # }      
      
      # // Print TVOC (from homeassistant sensor)
      # it.printf(0, 25, id(font1), TextAlign::BASELINE_LEFT, "TVOC");
      # if (id(outside_temperature).has_state()) {
      #   it.printf(64, 25, id(font1), TextAlign::BASELINE_RIGHT , "%.0f", id(tvoc).state);
      # }      

      # // Print "L'état du input text de HA: <state>" in midle center
      # it.printf(32, 36, id(font2), TextAlign::BASELINE_CENTER, "%s", id(alarm_state).state.c_str());

      # // Print time in HH:MM format
      # it.strftime(32, 48, id(font1), TextAlign::BOTTOM_CENTER, "%d-%m %H:%M:%S", id(esptime).now());



# # Gestion des timers
# interval:


# # Timer pour calculer le temps passé à avancer !
#   - interval: 2s
#     then:
#       - light.turn_on:
#           id: a_master_c3_oled_rgb
#           brightness: 30%
#           red: 100%
#           green: 0%
#           blue: 0%

#       - delay: 1s

#       - light.turn_on:
#           id: a_master_c3_oled_rgb
#           brightness: 0%
#           red: 100%
#           green: 0%
#           blue: 0%