Add automatic stop of relay following ESP32 temperature

So as to avoid overheating when too much current go through the device

Add internal temperature reporting to SYStoMQTT

This function is not available with ESP32 S3 and C3

main/ZactuatorONOFF.ino

@@ -29,6 +29,7 @@
 #include "User_config.h"
 
 #ifdef ZactuatorONOFF
+unsigned long timeinttemp = 0;
 
 void setupONOFF() {
   pinMode(ACTUATOR_ONOFF_GPIO, OUTPUT);
@@ -103,6 +104,25 @@ void MQTTtoONOFF(char* topicOri, char* datacallback) {
 }
 #  endif
 
+//Check regularly temperature of the ESP32 board and switch OFF the relay if temperature is more than MAX_TEMP_ACTUATOR
+#  ifdef MAX_TEMP_ACTUATOR
+void OverHeatingRelayOFF() {
+#    if defined(ESP32) && defined(SENS_SAR_MEAS_WAIT2_REG) // This macro is necessary to retrieve temperature and not present with S3 and C3 environment
+  if (millis() > (timeinttemp + TimeBetweenReadingIntTemp)) {
+    float internalTempc = intTemperatureRead();
+    Log.trace(F("Internal temperature of the ESP32 %F" CR), internalTempc);
+    if (internalTempc > MAX_TEMP_ACTUATOR && digitalRead(ACTUATOR_ONOFF_GPIO) == ACTUATOR_ON) {
+      Log.error("OverTemperature detected switching OFF Actuator");
+      ActuatorManualTrigger(!ACTUATOR_ON);
+    }
+    timeinttemp = millis();
+  }
+#    endif
+}
+#  else
+void OverHeatingRelayOFF() {}
+#  endif
+
 void ActuatorManualTrigger(uint8_t level) {
 #  ifdef ACTUATOR_BUTTON_TRIGGER_LEVEL
   if (level == ACTUATOR_BUTTON_TRIGGER_LEVEL) {

main/ZmqttDiscovery.ino

@@ -422,6 +422,15 @@ void pubMqttDiscovery() {
 #    endif
 #  endif
 #  ifdef ESP32
+  createDiscovery("sensor", //set Type
+                  subjectSYStoMQTT, "SYS: Internal temperature", (char*)getUniqueId("tempc", "").c_str(), //set state_topic,name,uniqueId
+                  "", "temperature", "{{ value_json.tempc }}", //set availability_topic,device_class,value_template,
+                  "", "", "°C", //set,payload_on,payload_off,unit_of_meas,
+                  0, //set  off_delay
+                  "", "", true, "", //set,payload_avalaible,payload_not avalaible   ,is a gateway entity, command topic
+                  "", "", "", "", false, // device name, device manufacturer, device model, device MAC
+                  stateClassMeasurement //State Class
+  );
 #    ifdef ZgatewayBT
   createDiscovery("sensor", //set Type
                   subjectSYStoMQTT, "SYS: Low Power Mode", (char*)getUniqueId("lowpowermode", "").c_str(), //set state_topic,name,uniqueId

main/config_ONOFF.h

@@ -46,7 +46,12 @@ extern void MQTTtoONOFF(char* topicOri, JsonObject& RFdata);
 #ifndef ACTUATOR_TRIGGER
 #  define ACTUATOR_TRIGGER false // false or true, enable to control an actuator directly from the board switch (default behavior if true), or by button if ACTUATOR_BUTTON_TRIGGER_LEVEL is defined
 #endif
-
+#ifndef MAX_TEMP_ACTUATOR
+//#  define MAX_TEMP_ACTUATOR         60 // Temperature that will trigger the relay to go OFF
+#endif
+#ifndef TimeBetweenReadingIntTemp
+#  define TimeBetweenReadingIntTemp 5000 // Time interval between internal temp measurement to switch off the relay if MAX_TEMP_ACTUATOR is reached
+#endif
 /*-------------------PIN DEFINITIONS----------------------*/
 // default pin, if not set into the MQTT json
 #ifndef ACTUATOR_ONOFF_GPIO

main/main.ino

@@ -216,6 +216,14 @@ static String ota_server_cert = "";
 
 bool ProcessLock = false; // Process lock when we want to use a critical function like OTA for example
 
+#  if defined(SENS_SAR_MEAS_WAIT2_REG)
+// ESP32 internal temperature reading
+#    include <stdio.h>
+
+#    include "rom/ets_sys.h"
+#    include "soc/rtc_cntl_reg.h"
+#    include "soc/sens_reg.h"
+#  endif
 #  ifdef ESP32_ETHERNET
 #    include <ETH.h>
 void WiFiEvent(WiFiEvent_t event);
@@ -1565,6 +1573,9 @@ void loop() {
 #ifdef ZactuatorFASTLED
       FASTLEDLoop();
 #endif
+#ifdef ZactuatorONOFF
+      OverHeatingRelayOFF();
+#endif
 #ifdef ZactuatorPWM
       PWMLoop();
 #endif
@@ -1616,20 +1627,42 @@ unsigned long uptime() {
   return uptime;
 }
 
+/**
+ * Calculate internal ESP32 temperature
+ */
+#if defined(ESP32) && defined(SENS_SAR_MEAS_WAIT2_REG)
+float intTemperatureRead() {
+  SET_PERI_REG_BITS(SENS_SAR_MEAS_WAIT2_REG, SENS_FORCE_XPD_SAR, 3, SENS_FORCE_XPD_SAR_S);
+  SET_PERI_REG_BITS(SENS_SAR_TSENS_CTRL_REG, SENS_TSENS_CLK_DIV, 10, SENS_TSENS_CLK_DIV_S);
+  CLEAR_PERI_REG_MASK(SENS_SAR_TSENS_CTRL_REG, SENS_TSENS_POWER_UP);
+  CLEAR_PERI_REG_MASK(SENS_SAR_TSENS_CTRL_REG, SENS_TSENS_DUMP_OUT);
+  SET_PERI_REG_MASK(SENS_SAR_TSENS_CTRL_REG, SENS_TSENS_POWER_UP_FORCE);
+  SET_PERI_REG_MASK(SENS_SAR_TSENS_CTRL_REG, SENS_TSENS_POWER_UP);
+  ets_delay_us(100);
+  SET_PERI_REG_MASK(SENS_SAR_TSENS_CTRL_REG, SENS_TSENS_DUMP_OUT);
+  ets_delay_us(5);
+  float temp_f = (float)GET_PERI_REG_BITS2(SENS_SAR_SLAVE_ADDR3_REG, SENS_TSENS_OUT, SENS_TSENS_OUT_S);
+  float temp_c = (temp_f - 32) / 1.8;
+  return temp_c;
+}
+#endif
+
 #if defined(ESP8266) || defined(ESP32) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
 void stateMeasures() {
   StaticJsonDocument<JSON_MSG_BUFFER> jsonBuffer;
   JsonObject SYSdata = jsonBuffer.to<JsonObject>();
   SYSdata["uptime"] = uptime();
   SYSdata["version"] = OMG_VERSION;
-  Log.trace(F("retrieving value of system characteristics Uptime (s):%u" CR), uptime());
 #  if defined(ESP8266) || defined(ESP32)
   uint32_t freeMem;
   freeMem = ESP.getFreeHeap();
   SYSdata["freemem"] = freeMem;
   SYSdata["mqttport"] = mqtt_port;
   SYSdata["mqttsecure"] = mqtt_secure;
 #    ifdef ESP32
+#      ifdef SENS_SAR_MEAS_WAIT2_REG // This macro is necessary to retrieve temperature and not present with S3 and C3 environment
+  SYSdata["tempc"] = intTemperatureRead();
+#      endif
   SYSdata["freestack"] = uxTaskGetStackHighWaterMark(NULL);
 #    endif
 #    ifdef ESP32_ETHERNET

platformio.ini

@@ -66,6 +66,8 @@ extra_configs =
 ;default_envs = heltec-wifi-lora-32-868
 ;default_envs = heltec-wifi-lora-32-915
 ;default_envs = heltec-rtl_433
+;default_envs = esp32c3-dev-m1-ble
+;default_envs = esp32s3-dev-c1-ble
 ;default_envs = nodemcuv2-rf
 ;default_envs = nodemcuv2-rf-cc1101
 ;default_envs = nodemcuv2-somfy-cc1101
@@ -1041,13 +1043,14 @@ build_flags =
   '-DZactuatorONOFF="ONOFF"'
   '-DACTUATOR_ON=1'
   '-DACTUATOR_OFF=0'
-  '-ACTUATOR_TRIGGER=true'
+  '-DACTUATOR_TRIGGER=true'
   '-DZsensorGPIOInput="GPIOInput"'
   '-DINPUT_GPIO=4'
   '-DGPIO_INPUT_TYPE=INPUT'
   '-DACTUATOR_ONOFF_GPIO=26'
   '-DZsensorADC="ADC"'
   '-DADC_GPIO=32'
+  '-DMAX_TEMP_ACTUATOR=65'
   '-DUSE_MAC_AS_GATEWAY_NAME'
   '-DFRAMEWORK_ARDUINO_SOLO1'
   '-DGATEWAY_MANUFACTURER="Shelly"'