Bgp At Doors of Autonomous Systems is Simple
The purpose of this project is to expand on the knowledge you have gained through NetPractice. You will have to simulate a network and configure it using GNS3 with docker images. BGP EVPN is based on BGP (RFC 4271) and its extensions MP-BGP (RFC4760). BGP is the routing protocol that drives the Internet. Through MP-BGP extensions, it can be used to carry reachability information (NLRI) for various protocols (IPv4, IPv6, L3 VPN and in this case, EVPN). EVPN is a special family for publishing information about MAC addresses and the end devices that access them..
• The whole project has to be done in a virtual machine.
• This project involves using and installing docker as well as GNS3.
• You have to put all the configuration files of your project in folders located at the root of your repository (go to Submission and peer-evaluation for more information).
The folders of the mandatory part will be named: P1, P2 and P3.
This project will consist of setting up several environments under specific rules. It is divided into three parts you have to do in the following order:
• Part 1: GNS3 configuration with Docker.
• Part 2: Discovering a VXLAN.
• Part 3: Discovering BGP with EVPN.