Skip to content

Commit

Permalink
add SECC Electrical and Mechanical specifications
Browse files Browse the repository at this point in the history
  • Loading branch information
@AmineSaidiADV
AmineSaidiADV committed Aug 12, 2024
1 parent 9fae09d commit 0067d62
Showing 1 changed file with 41 additions and 0 deletions.
41 changes: 41 additions & 0 deletions charge-controllers/ADM-CS-SECC/introduction.md
View file
Original file line number Diff line number Diff line change
Expand Up @@ -23,6 +23,47 @@ The ADM-CS-SECC is a charge controller for electric vehicle charging stations. T

Manufacturers of stationary and portable charging stations, integrators, research laboratories, new EV applications like rescue vehicles, charging emulation during vehicle development.

## Electrical and Mechanical specifications
| | | |
|-----------------------------|-------------------------------------------------|----------------------------------------------------|
| **Charging Standards** | **AC** | ISO 15118-2, ISO 15118-20, SAE J1772, IEC 61851-1 |
| | **CHAdeMO** | 1.x, with V2G extention |
| | **CCS (Combo 1,2)** | DIN SPEC 70121, ISO 15118-2, ISO 15118-20 |
| **Power input** | **Input voltage min / max** | 20 V / 28 V |
| | **Recommended nominal** | 24 V |
| | **Typical / Peak consumption** | 5 W / 20W |
| **Interfaces (user side)** | **CAN bus** | CAN 2.0B, extended addresses |
| | **Interlock** | 20mA current loop, 24V |
| | **Ventilator PWM** | 2 independent PWM channels |
| | **Digital Outputs** | 4 outputs, 24V, can be used with 12V logic |
| | **Digital Inputs** | 4 inputs, 24V and 12V compatible, Max voltage 30V |
| | **LEDs** | 3 LED outputs, 12V, overcurrent protected |
| | **RS-485** | Modbus-RTU stack available |
| | **Ethernet** | 100Mbps RJ45. Modbus TCP available |
| | **SD memory card** | 16 GB card standard |
| | **4G network connectivity** | Mini PCIE slot, populated with 4G modem |
| | **4G regions (per user request)** | EMEA/Korea/Thailand, NA, Australia, Japan |
| | **SIM slot** | Micro SIM, user supplied |
| **AC interface** | **Communication wires** | CP (Control Pilot), PP (Proximity Pilot) |
| | **Temperature measurements** | 2 PT1000 inputs |
| | **Locking mechanism** | Standard AC inlet locking interface |
| | **Output contactor driver** | 1 relay for driving output AC contactors |
| | **Protection** | HW interlocked relay (CP state monitor) |
| **CCS interface** | **Communication wires** | CP (Control Pilot), PP (Proximity Pilot) |
| | **Temperature measurements** | 2 PT1000 inputs |
| | **PLC (Powerline Communication)** | MStar/MediaTek GreenPHY |
| | **Output contactor driver** | 1 relay for driving output DC contactors |
| | **Protection** | HW interlocked relay (CP state monitor) |
| **CHAdeMO interface** | **Communication wires** | SEQ1, SEQ2, PROX, PERM, CANH, CANL |
| | **Temperature measurements** | 1 PT1000 input |
| | **Locking mechanism** | Solenoid driver |
| | **Output contactor driver** | 1 relay for driving output DC contactors |
| | **Protection** | HW interlocked relay (PERM state monitor) |
| **Mechanical** | **Module dimensions** | 212 x 90 x 58 mm |
| | **Connections** | Screw wire terminals |
| | **Weight** | 350 g |


## Software development guide

Please see the Software [Development Guide document](charge-controllers/sys3_user/README.md) for ADM-CS-SECC for details.
Expand Down

0 comments on commit 0067d62

Please sign in to comment.