Cleaned up Mbed LWIP configurations

features/lwipstack/lwip-sys/arch/cc.h

@@ -48,8 +48,10 @@ extern "C" {
 #define BYTE_ORDER LITTLE_ENDIAN
 #endif
 
+#ifndef LWIP_PROVIDE_ERRNO
 /* Use LWIP error codes */
 #define LWIP_PROVIDE_ERRNO
+#endif
 
 #if defined(__arm__) && defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 6010050)
     /* Keil uVision4 tools */

features/lwipstack/lwip/src/include/lwip/lwip_errno.h

@@ -44,6 +44,7 @@ extern "C" {
 #endif
 
 #ifdef LWIP_PROVIDE_ERRNO
+#if LWIP_PROVIDE_ERRNO == 1
 
 #define  EPERM            1  /* Operation not permitted */
 #define  ENOENT           2  /* No such file or directory */
@@ -177,6 +178,7 @@ extern "C" {
 extern int errno;
 #endif
 
+#endif //LWIP_PROVIDE_ERRNO == 1
 #else /* LWIP_PROVIDE_ERRNO */
 
 /* Define LWIP_ERRNO_STDINCLUDE if you want to include <errno.h> here */

features/lwipstack/lwipopts.h

@@ -25,23 +25,21 @@
 #include <sys/time.h>
 #endif
 #include "nsapi_types.h"
+#include "mbed_retarget.h"
+
 // Operating System
 #define NO_SYS                      0
 
-#if MBED_CONF_LWIP_IPV4_ENABLED
-#define LWIP_IPV4                   1
-#else
-#define LWIP_IPV4                   0
-#endif
-#if MBED_CONF_LWIP_IPV6_ENABLED
-#define LWIP_IPV6                   1
-#else
-#define LWIP_IPV6                   0
-#endif
 #if !MBED_CONF_LWIP_IPV4_ENABLED && !MBED_CONF_LWIP_IPV6_ENABLED
 #error "Either IPv4 or IPv6 must be enabled."
 #endif
 
+#define LWIP_IPV4                   MBED_CONF_LWIP_IPV4_ENABLED
+
+#define LWIP_IPV6                   MBED_CONF_LWIP_IPV6_ENABLED
+
+#define LWIP_PROVIDE_ERRNO 0
+
 // On dual stack configuration how long to wait for both or preferred stack
 // addresses before completing bring up.
 #if LWIP_IPV4 && LWIP_IPV6
@@ -57,32 +55,23 @@
 #define BOTH_ADDR_TIMEOUT           0
 #endif
 
-// Configurable DHCP timeout. DHCP timeout can be configured for specific usecase requirement.
-#ifdef MBED_CONF_LWIP_DHCP_TIMEOUT
-#define DHCP_TIMEOUT                (MBED_CONF_LWIP_DHCP_TIMEOUT)
-#else
-#define DHCP_TIMEOUT                60
-#endif
+
+#define DHCP_TIMEOUT                MBED_CONF_LWIP_DHCP_TIMEOUT
 
 #define LINK_TIMEOUT                60
 
 #define PREF_IPV4                   1
 #define PREF_IPV6                   2
 
-#if MBED_CONF_LWIP_IP_VER_PREF == 4
-#define IP_VERSION_PREF             PREF_IPV4
-#endif
 #if MBED_CONF_LWIP_IP_VER_PREF == 6
 #define IP_VERSION_PREF             PREF_IPV6
-#endif
-#ifndef IP_VERSION_PREF
+#elif MBED_CONF_LWIP_IP_VER_PREF == 4
+#define IP_VERSION_PREF             PREF_IPV4
+#else
 #error "Either IPv4 or IPv6 must be preferred."
 #endif
 
-#undef  LWIP_DEBUG
-#if MBED_CONF_LWIP_DEBUG_ENABLED
-#define LWIP_DEBUG                  1
-#endif
+#define LWIP_DEBUG                  MBED_CONF_LWIP_DEBUG_ENABLED
 
 #if NO_SYS == 0
 #include "cmsis_os2.h"
@@ -102,11 +91,6 @@
 // Thread stacks use 8-byte alignment
 #define LWIP_ALIGN_UP(pos, align) ((pos) % (align) ? (pos) +  ((align) - (pos) % (align)) : (pos))
 
-// Thread stack size for lwip tcpip thread
-#ifndef MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE
-#define MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE      1200
-#endif
-
 #ifdef LWIP_DEBUG
 // For LWIP debug, double the stack
 #define TCPIP_THREAD_STACKSIZE      LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE*2, 8)
@@ -120,11 +104,6 @@
 // Thread priority (osPriorityNormal by default)
 #define TCPIP_THREAD_PRIO           (MBED_CONF_LWIP_TCPIP_THREAD_PRIORITY)
 
-// Thread stack size for lwip system threads
-#ifndef MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE
-#define MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE    512
-#endif
-
 #ifdef LWIP_DEBUG
 #define DEFAULT_THREAD_STACKSIZE    LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE*2, 8)
 #else
@@ -143,43 +122,24 @@
 #define LWIP_RAM_HEAP_POINTER       lwip_ram_heap
 
 // Number of simultaneously queued TCP segments.
-#ifdef MBED_CONF_LWIP_MEMP_NUM_TCP_SEG
 #define MEMP_NUM_TCP_SEG            MBED_CONF_LWIP_MEMP_NUM_TCP_SEG
-#endif
 
 // TCP Maximum segment size.
-#ifdef MBED_CONF_LWIP_TCP_MSS
 #define TCP_MSS                     MBED_CONF_LWIP_TCP_MSS
-#endif
 
 // TCP sender buffer space (bytes).
-#ifdef MBED_CONF_LWIP_TCP_SND_BUF
 #define TCP_SND_BUF                 MBED_CONF_LWIP_TCP_SND_BUF
-#endif
 
 // TCP sender buffer space (bytes).
-#ifdef MBED_CONF_LWIP_TCP_WND
 #define TCP_WND                     MBED_CONF_LWIP_TCP_WND
-#endif
 
-#ifdef MBED_CONF_LWIP_TCP_MAXRTX
 #define TCP_MAXRTX                  MBED_CONF_LWIP_TCP_MAXRTX
-#endif
 
-#ifdef MBED_CONF_LWIP_TCP_SYNMAXRTX
 #define TCP_SYNMAXRTX               MBED_CONF_LWIP_TCP_SYNMAXRTX
-#endif
 
 // Number of pool pbufs.
 // Each requires 684 bytes of RAM (if MSS=536 and PBUF_POOL_BUFSIZE defaulting to be based on MSS)
-#ifdef MBED_CONF_LWIP_PBUF_POOL_SIZE
-#undef PBUF_POOL_SIZE
 #define PBUF_POOL_SIZE              MBED_CONF_LWIP_PBUF_POOL_SIZE
-#else
-#ifndef PBUF_POOL_SIZE
-#define PBUF_POOL_SIZE              5
-#endif
-#endif
 
 #ifdef MBED_CONF_LWIP_PBUF_POOL_BUFSIZE
 #undef PBUF_POOL_BUFSIZE
@@ -194,63 +154,38 @@
 #endif
 #endif
 
-#ifdef MBED_CONF_LWIP_MEM_SIZE
-#undef MEM_SIZE
 #define MEM_SIZE                    MBED_CONF_LWIP_MEM_SIZE
-#endif
 
 // One tcp_pcb_listen is needed for each TCPServer.
 // Each requires 72 bytes of RAM.
-#ifdef MBED_CONF_LWIP_TCP_SERVER_MAX
 #define MEMP_NUM_TCP_PCB_LISTEN     MBED_CONF_LWIP_TCP_SERVER_MAX
-#else
-#define MEMP_NUM_TCP_PCB_LISTEN     4
-#endif
 
 // One is tcp_pcb needed for each TCPSocket.
 // Each requires 196 bytes of RAM.
-#ifdef MBED_CONF_LWIP_TCP_SOCKET_MAX
 #define MEMP_NUM_TCP_PCB            MBED_CONF_LWIP_TCP_SOCKET_MAX
-#else
-#define MEMP_NUM_TCP_PCB            4
-#endif
 
 // One udp_pcb is needed for each UDPSocket.
 // Each requires 84 bytes of RAM (total rounded to multiple of 512).
-#ifdef MBED_CONF_LWIP_UDP_SOCKET_MAX
 #define MEMP_NUM_UDP_PCB            MBED_CONF_LWIP_UDP_SOCKET_MAX
-#else
-#define MEMP_NUM_UDP_PCB            4
-#endif
 
 // Number of non-pool pbufs.
 // Each requires 92 bytes of RAM.
-#ifndef MEMP_NUM_PBUF
-#define MEMP_NUM_PBUF               8
-#endif
+#define MEMP_NUM_PBUF               MBED_CONF_LWIP_NUM_PBUF
 
 // Each netbuf requires 64 bytes of RAM.
-#ifndef MEMP_NUM_NETBUF
-#define MEMP_NUM_NETBUF             8
-#endif
+#define MEMP_NUM_NETBUF             MBED_CONF_LWIP_NUM_NETBUF
 
 // One netconn is needed for each UDPSocket, TCPSocket or TCPServer.
 // Each requires 236 bytes of RAM (total rounded to multiple of 512).
-#ifdef MBED_CONF_LWIP_SOCKET_MAX
 #define MEMP_NUM_NETCONN            MBED_CONF_LWIP_SOCKET_MAX
-#else
-#define MEMP_NUM_NETCONN            4
-#endif
 
 #if MBED_CONF_LWIP_TCP_ENABLED
 #define LWIP_TCP                    1
 #define TCP_OVERSIZE                0
 #define LWIP_TCP_KEEPALIVE          1
-#ifdef MBED_CONF_TCP_CLOSE_TIMEOUT
-#define TCP_CLOSE_TIMEOUT            MBED_CONF_TCP_CLOSE_TIMEOUT
-#else
-#define TCP_CLOSE_TIMEOUT            1000
-#endif
+
+#define TCP_CLOSE_TIMEOUT            MBED_CONF_LWIP_TCP_CLOSE_TIMEOUT
+
 #else
 #define LWIP_TCP                    0
 #endif

features/lwipstack/mbed_lib.json

@@ -21,6 +21,10 @@
             "help": "Address timeout mode; true: wait both stack's addresses; false: wait for preferred stack's address",
             "value": true
         },
+        "dhcp-timeout": {
+            "help": "DHCP timeout value",
+            "value": 60
+        },
         "ethernet-enabled": {
             "help": "Enable support for Ethernet interfaces",
             "value": true
@@ -74,28 +78,28 @@
             "value": 4
         },
         "memp-num-tcp-seg": {
-            "help": "Number of simultaneously queued TCP segments. Current default (used if null here) is set to 16 in opt.h, unless overridden by target Ethernet drivers.",
-            "value": null
+            "help": "Number of simultaneously queued TCP segments, see LWIP opt.h for more information. Current default is 16.",
+            "value": 16
         },
         "tcp-mss": {
-            "help": "TCP Maximum segment size. Current default (used if null here) is set to 536 in opt.h, unless overridden by target Ethernet drivers.",
-            "value": null
+            "help": "TCP Maximum segment size, see LWIP opt.h for more information. Current default is 536.",
+            "value": 536
         },
         "tcp-snd-buf": {
-            "help": "TCP sender buffer space (bytes). Current default (used if null here) is set to (2 * TCP_MSS) in opt.h, unless overridden by target Ethernet drivers.",
-            "value": null
+            "help": "TCP sender buffer space (bytes), see LWIP's opt.h for more information. Current default is (2 * TCP_MSS).",
+            "value": "(2 * TCP_MSS)"
         },
         "tcp-wnd": {
-            "help": "TCP sender buffer space (bytes). Current default (used if null here) is set to (4 * TCP_MSS) in opt.h, unless overridden by target Ethernet drivers.",
-            "value": null
+            "help": "TCP sender buffer space (bytes), see LWIP's opt.h for more information. Current default is (4 * TCP_MSS).",
+            "value": "(4 * TCP_MSS)"
         },
         "tcp-maxrtx": {
-            "help": "Maximum number of retransmissions of data segments.",
+            "help": "Maximum number of retransmissions of data segments, see LWIP's opt.h for more information. Current default is 6.",
             "value": 6
         },
         "tcp-synmaxrtx": {
-            "help": "Maximum number of retransmissions of SYN segments. Current default (used if null here) is set to 6 in opt.h",
-            "value": null
+            "help": "Maximum number of retransmissions of SYN segments, see LWIP's opt.h for more information. Current default is 6.",
+            "value": 6
         },
         "tcp-close-timeout": {
             "help": "Maximum timeout (ms) for TCP close handshaking timeout",
@@ -106,16 +110,16 @@
             "value": "osPriorityNormal"
         },
         "pbuf-pool-size": {
-            "help": "Number of pbufs in pool - usually used for received packets, so this determines how much data can be buffered between reception and the application reading. If a driver uses PBUF_RAM for reception, less pool may be needed. Current default (used if null here) is set to 5 in lwipopts.h, unless overridden by target Ethernet drivers.",
-            "value": null
+            "help": "Number of pbufs in pool - usually used for received packets, so this determines how much data can be buffered between reception and the application reading, see LWIP's opt.h for more information. If a driver uses PBUF_RAM for reception, less pool may be needed. Current default  is 5.",
+            "value": 5
         },
         "pbuf-pool-bufsize": {
-            "help": "Size of pbufs in pool. If set to null, lwIP will base the size on the TCP MSS, which is 536 unless overridden by the target",
+            "help": "Size of pbufs in pool, see LWIP's opt.h for more information.",
             "value": null
         },
         "mem-size": {
-            "help": "Size of heap (bytes) - used for outgoing packets, and also used by some drivers for reception. Current default (used if null here) is set to 1600 in opt.h, unless overridden by target Ethernet drivers.",
-            "value": null
+            "help": "Size of heap (bytes) - used for outgoing packets, and also used by some drivers for reception, see LWIP's opt.h for more information. Current default is 1600.",
+            "value": 1600
         },
         "tcpip-thread-stacksize": {
             "help": "Stack size for lwip TCPIP thread",
@@ -128,6 +132,14 @@
         "ppp-thread-stacksize": {
             "help": "Thread stack size for PPP (obsolete: use netsocket/ppp configuration instead)",
             "value": 768
+        },
+        "num-pbuf": {
+            "help": "Number of non-pool pbufs, each needs 92 bytes of RAM, see LWIP's opt.h for more information. Current default is 8.",
+            "value": 8
+        },
+        "num-netbuf": {
+            "help": "Number of netbufs, each netbuf requires 64 bytes of RAM, see LWIP's opt.h for more information. Current default is 8.",
+            "value": 8
         }
     },
     "target_overrides": {

features/netsocket/ppp/include/ppp_opts.h

@@ -71,7 +71,9 @@
 #define PPP_DNS                           1
 
 // Used as maximum size for output buffer, to restrict the memory manager get_pool_alloc_unit()
+#ifndef PBUF_POOL_BUFSIZE
 #define PBUF_POOL_BUFSIZE                 536 + 40
+#endif
 
 #endif // PPP_SUPPORT